Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A Colorimetric Membrane-Based Sensor with Improved Selectivity towards Amphetamine

ABSTRACT: Due to their simplicity, speed and low cost, chemical spot tests are increasingly demanded for the presumptive identification of illicit drugs in a variety of contexts such as point-of-care assistance or prosecution of drug trafficking. However, most of the colorimetric reactions used in these tests are, at best, drug class selective. Therefore, the development of tests based on chemical reactions with improved discrimination power is of great interest. In this work, we propose a new colorimetric assay for amphetamine (AMP) based on its reaction with solutions of alkaline gold bromide to form an insoluble yellow–orange derivative. The resulting suspensions are then filtered onto nylon membranes and the precipitate collected is used for the visual identification of AMP. The measurement of the absorbance of the membranes by diffuse reflectance spectroscopy also allows the quantification of AMP in a simple and rapid way, as demonstrated for different synthetic and drug street samples. On the basis of the results obtained, it was concluded that the proposed procedure is highly selective towards AMP, as this compound could be easily differentiated from other common drugs such as methamphetamine (MET), ephedrine (EPH), scopolamine (SCP) and cocaine (COC).

SUBMITTER: Jornet-Martinez N

PROVIDER: S-EPMC8588055 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Smartphone-Based Microfluidic Colorimetric Sensor for Gaseous Formaldehyde Determination with High Sensitivity and Selectivity.

Project description:Formaldehyde is one of the most dangerous air pollutants, which can cause sick building syndrome. Thus, it is very crucial to precisely determine formaldehyde with a low cost and simple operation. In this paper, a smartphone-based microfluidic colorimetric sensor is devised for gaseous formaldehyde determination with high sensitivity and selectivity. Specifically, a novel microfluidic chip is proposed based on the 4-aminohydrazine-5-mercapto-1,2,4-triazole (AHMT) method to determine formaldehyde; the chip consists of two reagent reservoirs, one reaction reservoir and a mixing column. In this design to prevent the fluid from flowing out while letting the gas molecule in, a hydrophobic porous poly tetra fluoroethylene (PTFE) membrane is put on the top of the reaction reservoir. Using the microfluidic chip sensor, a smartphone-based formaldehyde determination system is developed, which makes the measuring process automated and simple. As per the experiment results, the limit-of-detection (LOD) of the system is as low as 0.01 ppm, which is much lower than the maximum exposure concentration (0.08 ppm) recommended by the World Health Organization (WHO). Moreover, the sensor is hardly affected by acetaldehyde, volatile organic compounds (VOCs) or acidic-alkaline, which shows great selectivity. Finally, the performance of the proposed sensor is verified by using it for the determination of formaldehyde in a newly decorated house.

| S-EPMC6165092 | biostudies-literature

Highly sensitive optical ion sensor with ionic liquid-based colorimetric membrane/photonic crystal hybrid structure.

Project description:An ionic liquid-based thin (~ 1 µm) colorimetric membrane (CM) is a key nano-tool for optical ion sensing, and a two-dimensional photonic crystal slab (PCS) is an important nano-platform for ultimate light control. For highly sensitive optical ion sensing, this report proposes a hybrid of these two optical nano-elements, namely, a CM/PCS hybrid. This structure was successfully fabricated by a simple and rapid process using nanoimprinting and spin-coating, which enabled control of the CM thickness. Optical characterization of the hybrid structure was conducted by optical measurement and simulation of the reflection spectrum, indicating that the light confined in the holes of the PCS was drastically absorbed by the CM when the spectrum overlapped with the absorption spectrum of the CM. This optical property obtained by the hybridization of CM and PCS enabled drastic improvement in the absorption sensitivity in Ca ion sensing, by ca. 78 times compared to that without PCS. Experimental and simulated investigation of the relation between the CM thickness and absorption sensitivity enhancement suggested that the controlled light in the PCS enhanced the absorption cross-section of the dye molecules within the CM based on the enhanced local density of states. This highly sensitive optical ion sensor is expected to be applied for micro-scale bio-analysis like cell-dynamics based on reflectometric Ca ion detection.

| S-EPMC7542176 | biostudies-literature

MoOx-Based Colorimetric Sensor for Ultraviolet Visualization.

Project description:Due to the depletion of the global ozone layer and the presence of ozone holes, humans are increasingly exposed to threats from solar ultraviolet radiation. Therefore, researching and developing a highly selective, sensitive, simple, and fast ultraviolet sensor is of significant importance for personal protection. In recent years, new nanomaterials have shown good application prospects in the research of ultraviolet sensors. MoOx nanostructures were prepared by a hydrothermal method. The experimental results show that, compared to traditional photochromic compounds, the new MoOx nanostructures exhibit high uniqueness, high selectivity, and excellent stability, and can perform rapid and accurate detection under full-band light. The beam sensor can not only detect through traditional electrical signal output, but also amplify, display, and analyze the beam through visualization and visual analysis, further improving the reliability and practicality of its application.

| S-EPMC11013073 | biostudies-literature

Photo-Rheological Fluid-Based Colorimetric Ultraviolet Light Intensity Sensor.

Project description:This study presents an introduction to a new type of ultraviolet (UV) light intensity sensor using photo-rheological (PR) fluids whose properties, such as color, can be changed by UV light. When the PR fluids were irradiated by UV light, colorimetric transitions were observed. Effectively, this means that their color changed gradually from yellow to red. The degree of the color change depended on the UV light intensity and was characterized by the hue value of the images acquired with a compact image sensor. We demonstrated that UV light-responsive capabilities can be readily imparted to PR fluids, and that the colorimetric responses to different UV light intensities can be used to measure the UV light intensities.

| S-EPMC6427374 | biostudies-other

Poly(aspartic acid) Electrospun Nanofiber Hydrogel Membrane-Based Reusable Colorimetric Sensor for Cu(II) and Fe(III) Detection.

Project description:Electrospun nanofiber membrane (ENM) with huge specific surface area is an ideal solid substrate for sensors. However, only a few ENMs are developed into colorimetric sensors and it is even more challenging to fabricate multiple-ion-responsive ENM-based colorimetric sensor. In this study, benefiting from the excellent metal ion adsorption ability of poly(aspartic acid) (PASP) and high specific surface area of nanofibers, a reusable colorimetric sensor utilizing PASP electrospun nanofiber hydrogel membrane (ENHM) was designed to detect Cu2+ and Fe3+ in aqueous solution with simple filtration. The sensor based on PASP-ENHM exhibited high sensitivity and selectivity, and colorimetric responses for Cu2+ and Fe3+ detection could be observed by the naked eye. Upon exposure to Cu2+ aqueous solution, the color of the sensor changed from white to blue with a naked eye detection limit of 0.3 mg/L, while it turned from white to yellow with a detection limit of 0.1 mg/L for Fe3+ detection. Furthermore, this sensor was reusable after metal ion extraction by the desorption process.

| S-EPMC6740173 | biostudies-literature

Discrimination of Chinese Baijiu grades based on colorimetric sensor arrays.

Project description:In this study, a novel colorimetric sensor array based on chemo dyes including porphyrins and pH indicators were developed to analyse the volatile organic compounds of Chinese Baijiu with different grades. Ethyl acetate, ethyl butyrate and ethyl caproate appeared by significantly different concentration in different Baijiu grades measuring by gas chromatography and mass spectrometry and they were chosen as characteristic volatile organic components. The olfactory visualization system based on colorimetric sensor arrays was used to identify different Baijiu grades. The data were processed by building the principle components analysis, linear discriminant analysis and K-nearest neighbor classification models with the results of sensory evaluation and olfactory visualization system. This work presents a new-style colorimetric sensor using sensitive chemo dyes which has significant potential in quantitative analysis of volatile organic compounds, afterwards identifying different grades of Baijiu.

| S-EPMC7347733 | biostudies-literature

A degron blocking strategy towards improved CRBN recruiting PROTAC selectivity

Project description:The different layers of complexity in PROTAC design have slowed the broad implementation of this novel pharmacological approach. Given the challenges and opportunities of CRL4CRBN hijacking PROTACs we set out to identify and develop broadly implementable strategies to generate PROTACs with improved specificity for their targets. We used structural analysis of known neo-substrate degrons to generate “degron blocked IMiD” analogues and validated that they did not degrade any known neo-substrates using quantitative proteomics. We then applied this strategy to a known BRD9 PROTAC (dBRD9-A) to generate a degron-blocking analogue with a specific degradation profile.

2023-07-10 | PXD038503 | Pride

A degron blocking strategy towards improved CRBN recruiting PROTAC selectivity

2023-07-10 | PXD038298 | Pride

Efficient Colorimetric Fluoride Anion Sensor Based on π-Conjugated Carbazole Small Molecule.

Project description:The ability to detect fluoride anions with high selectivity and sensitivity by using the naked eye is crucial yet challenging. In this study, a novel, simple conjugated organic dye, N-tert-butyldimethylsilyl-3,6-diiodocarbazole (CA-TBMDS) was developed and used for the first time as a colorimetric sensor for fluoride. CA-TBMDS was found to be a highly sensitive fluoride chemosensor, with a detection limit as low as 3 × 10-5 M. The reaction of CA-TBMDS with fluoride anions in a tetrahydrofuran solution resulted in a color change from colorless to yellow under ambient light, which can be discriminated by the naked eye. The sensor operated via intermolecular proton transfer between the amide units and the fluoride anion, as confirmed by proton nuclear magnetic resonance titration. CA-TBMDS is not only highly sensitive to fluoride anions, but also exhibits high sensitivity in the presence of various ions. This work demonstrates that N-butyldimethylchlorosilane-based organic dyes have prospective utility as a type of fluoride anion chemosensor.

| S-EPMC8423907 | biostudies-literature

An Improved Comparison of Chemometric Analyses for the Identification of Acids and Bases With Colorimetric Sensor Arrays.

Project description:Colorimetric sensor arrays incorporating red, green, and blue (RGB) image analysis use value changes from multiple sensors for the identification and quantification of various analytes. RGB data can be easily obtained using image analysis software such as ImageJ. Subsequent chemometric analysis is becoming a key component of colorimetric array RGB data analysis, though literature contains mainly principal component analysis (PCA) and hierarchical cluster analysis (HCA). Seeking to expand the chemometric methods toolkit for array analysis, we explored the performance of nine chemometric methods were compared for the task of classifying 631 solutions (0.1 to 3 M) of acetic acid, malonic acid, lysine, and ammonia using an eight sensor colorimetric array. PCA and LDA (linear discriminant analysis) were effective for visualizing the dataset. For classification, linear discriminant analysis (LDA), (k nearest neighbors) KNN, (soft independent modelling by class analogy) SIMCA, recursive partitioning and regression trees (RPART), and hit quality index (HQI) were very effective with each method classifying compounds with over 90% correct assignments. Support vector machines (SVM) and partial least squares - discriminant analysis (PLS-DA) struggled with ~85 and 39% correct assignments, respectively. Additional mathematical treatments of the data set, such as incrementally increasing the exponents, did not improve the performance of LDA and KNN. The literature precedence indicates that the most common methods for analyzing colorimetric arrays are PCA, LDA, HCA, and KNN. To our knowledge, this is the first report of comparing and contrasting several more diverse chemometric methods to analyze the same colorimetric array data.

| S-EPMC6863514 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data