Browse
Submit Data
Databases
API
Help

Dataset Information

24 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Physical and chemical properties of binary mixtures of dibutylammonium-based ionic liquids and water

ABSTRACT: Ionic liquids are used in different processes owing to their low vapor pressure, large viscosity range, chemical and thermal stability, and superior conductance even without water. These features make them flexible and tunable, indicating their possible use as substitutes for commonly used compounds in many processes. The objective of this study was to evaluate the properties of aqueous binary solutions for three different ionic liquids (ILs): dibutylammonium acetate, dibutylammonium propanoate, and dibutylammonium butanoate. The measured properties were density, speed of sound, and conductivity, and their isentropic compressibility and thermal expansion coefficient were calculated based on these properties. The temperature range used for measurements was 293.15–323.15 K. Mathematical models were used for each ionic liquid + water mixture to fit the density and speed of sound data. The increase in the alkyl chain leads to a tendency to decrease the values of density, speed of sound, and conductivity of the solutions. However, decreasing the dilution in water, the density, the conductivity and the speed of sound initially increase and then decrease, exhibiting a maximum in the initial water concentration range which indicates the formation of aggregates. Critical micellar concentrations at 298 K were determined through conductivity data. Enhancing the temperature leads to a decrease on density and sound velocity.

Supplementary Information

The online version contains supplementary material available at 10.1007/s43153-021-00174-7.

SUBMITTER: Costa F

PROVIDER: S-EPMC8591436 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Solid-liquid equilibria of binary mixtures of fluorinated ionic liquids.

Project description:Within ionic liquids, fluorinated ionic liquids (FILs) present unique physico-chemical properties and potential applications in several fields. However, the melting point of these neoteric compounds is usually higher due to the presence of fluorine atoms. This drawback may be resolved by, for instance, mixing different FILs to create eutectic mixtures. In this work, binary mixtures of fluoro-containing and fluorinated ionic liquids were considered with the aim of decreasing their melting temperatures as well as understanding and characterizing these mixtures and their phase transitions. Five FILs were selected, allowing the investigation of four binary mixtures, each of them with a common ion. Their solid-liquid and solid-solid equilibria were studied by differential scanning calorimetry and the non-ideality of the mixtures was investigated. Overall, a variety of solid-liquid equilibria with systems exhibiting eutectic behavior, polymorphs with solid-solid phase transitions, and the formation of intermediate compounds and solid solutions were surprisingly found. In addition to these intriguing behaviours, novel FILs with lower melting temperatures were obtained by the formation of binary systems, thus enlarging the application range of FILs at lower temperatures.

| S-EPMC5034896 | biostudies-literature

Density and Viscosity of Binary Mixtures of Thiocyanate Ionic Liquids + Water as a Function of Temperature.

Project description:Densities and viscosities have been determined for binary mixtures of the ionic liquids (ILs) 1-butyl-3-methylimidazolium thiocyanate [BMIM][SCN], or 1-butyl-4-methylpyridinium thiocyanate [BMPy][SCN], or 1-butyl-1-methylpyrrolidinium thiocyanate [BMPYR][SCN], or 1-butyl-1-methylpiperidinium thiocyanate [BMPIP][SCN] with water over wide range of temperatures (298.15-348.15) K and ambient pressure. The thermal properties of [BMPy][SCN], i.e. glass transition temperature and the heat capacity at glass transition, have been measured using a differential scanning microcalorimetry, DSC. The decomposition of [BMPy][SCN] was detected. The density and viscosity correlations for these systems have been made using an empirical second-order polynomial and by the Vogel-Fulcher-Tammann equation, respectively. The concentration dependences have been described by polynomials. The excess molar volumes and deviations in viscosity have been calculated from the experimental values and were correlated by Redlich-Kister polynomial expansions. The variations of these parameters, with compositions of the mixtures and temperature, have been discussed in terms of molecular interactions. A qualitative analysis of the trend of properties with composition and temperature was performed. Further, the excess partial molar volumes, [Formula: see text] and [Formula: see text], were calculated and discussed. The isobaric expansivities (coefficient of thermal expansion), ?, and the excess isobaric expansivities, ?(E), were determined for four ILs and their mixtures with water. The results indicate that the interactions of thiocyanate ILs with water is not as strong as with alcohols, which is shown by the positive/slightly negative excess molar volumes in these binary systems. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1007/s10953-012-9875-7) contains supplementary material, which is available to authorized users.

| S-EPMC3434890 | biostudies-literature

Thermal Analysis of Binary Mixtures of Imidazolium, Pyridinium, Pyrrolidinium, and Piperidinium Ionic Liquids.

Project description:Ionic liquids (ILs) are being widely studied due to their unique properties, which make them potential candidates for conventional solvents. To study whether binary mixtures of pure ionic liquids provide a viable alternative to pure ionic liquids for different applications, in this work, the thermal analysis and molar heat capacities of five equimolar binary mixtures of ionic liquids based on imidazolium, pyridinium, pyrrolidinium, and piperidinium cations with dicyanamide, trifluoromethanesulfonate, and bis(trifluoromethylsulfonyl)imide anions have been performed. Furthermore, two pure ionic liquids based on piperidinium cation have been thermally characterized and the heat capacity of one of them has been measured. The determination and evaluation of both the transition temperatures and the molar heat capacities was carried out using differential scanning calorimetry (DSC). It was observed that the thermal behavior of the mixtures was completely different than the thermal behavior of the pure ionic liquids present, while the molar heat capacities of the binary mixtures were very similar to the value of the average of molar heat capacities of the two pure ionic liquids.

| S-EPMC8587281 | biostudies-literature

Peek Inside the Water Mixtures of Ionic Liquids at Molecular Level: Microscopic Properties Probed by EPR Spectroscopy.

Project description:Many ionic liquids (ILs) can be mixed with water, forming either true solutions or emulsions. This favors their applications in many respects, but at the same time might strongly alter their physicochemical properties. A number of methods exist for studying the macroscopic properties of such mixtures, whereas understanding their characteristics at micro/nanoscale is rather challenging. In this work we investigate microscopic properties, such as viscosity and local structuring, in binary water mixtures of IL [Bmim]BF4 in liquid and glassy states. For this sake, we use continuous wave and pulse electron paramagnetic resonance (EPR) spectroscopy with dedicated spin probes, located preferably in IL-rich domains or distributed in IL- and water-rich domains. We demonstrate that the glassy-state nanostructuring of IL-rich domains is very similar to that in neat ILs. At the same time, in liquid state the residual water makes local viscosity in IL-rich domains noticeably different compared to neat ILs, even though the overwhelming amount of water is contained in water-rich domains. These results have to be taken into account in various applications of IL-water mixtures, especially in those cases demanding the combinations of optimum micro- and macroscopic characteristics.

| S-EPMC8584414 | biostudies-literature

Properties of water confined in ionic liquids.

Project description:The varying states of water confined in the nano-domain structures of typical room temperature ionic liquids (ILs) were investigated by (1)H NMR and by measurements of self-diffusion coefficients while systematically varying the IL cations and anions. The NMR peaks for water in BF4-based ILs were clearly split, indicating the presence of two discrete states of confined water (H2O and HOD). Proton and/or deuterium exchange rate among the water molecules was very slowly in the water-pocket. Notably, no significant changes were observed in the chemical shifts of the ILs. Self-diffusion coefficient results showed that water molecules exhibit a similar degree of mobility, although their diffusion rate is one order of magnitude faster than that of the IL cations and anions. These findings provide information on a completely new type of confinement, that of liquid water in soft matter.

| S-EPMC4448549 | biostudies-other

Temperature-Dependent Surface Enrichment Effects in Binary Mixtures of Fluorinated and Non-Fluorinated Ionic Liquids.

Project description:Using angle-resolved X-ray photoelectron spectroscopy (ARXPS), we investigate the topmost nanometers of various binary ionic liquid (IL) mixtures at different temperatures in the liquid state. The mixtures consist of ILs with the same [PF6 ]- anion but two different cations, namely 3-methyl-1-(3,3,4,4,4-pentafluorobutyl)imidazolium hexafluorophosphate, [PFBMIm][PF6 ], and 1-butyl-3-methylimidazolium hexafluorophosphate, [C4 C1 Im][PF6 ], with 10, 25, 50 and 75?mol?% content of [PFBMIm][PF6 ]. We observe a preferential enrichment of the fluorinated chain in the topmost layer, relative to the bulk composition, which is most pronounced for the lowest content of [PFBMIm][PF6 ]. Upon cooling the mixtures stepwise from 95?°C until surface charging effects in XPS indicate solidification, we observe a pronounced increase in surface enrichment of the fluorinated chain with decreasing temperature in the liquid state. In contrast to the mixtures with lower [PFBMIm][PF6 ] contents, cooling the 75?mol?% mixture additionally shows an abrupt decrease of the fluorinated chain signal before complete solidification occurs, which is assigned to partial precipitation effects.

| S-EPMC7027538 | biostudies-literature

Influence of Small Quantities of Water on the Physical Properties of Alkylammonium Nitrate Ionic Liquids.

Project description:This paper presents a comprehensive study of two alkylammonium nitrate ionic liquids. As part of this family of materials, mainly ethylammonium nitrate (EAN) and also propylammonium nitrate (PAN) have attracted a great deal of attention during the last decades due to their potential applications in many fields. Although there have been numerous publications focused on the measurement of their physical properties, a great dispersion can be observed in the results obtained for the same magnitude. One of the critical points to be taken into account in their physical characterization is their water content. Thus, the main objective of this work was to determine the degree of influence of the presence of small quantities of water in EAN and PAN on the measurement of density, viscosity, electrical conductivity, refractive index and surface tension. For this purpose, the first three properties were determined in samples of EAN and PAN with water contents below 30,000 ppm in a wide range of temperatures, between 5 and 95 °C, while the last two were obtained at 25 °C. As a result of this study, it has been concluded that the presence of water is critical in those physical properties that involve mass or charge transport processes, resulting in the finding that the absolute value of the average percentage change in both viscosity and electrical conductivity is above 40%. Meanwhile, refractive index (≤0.3%), density (≤0.5%) and surface tension (≤2%) present much less significant changes.

| S-EPMC8306069 | biostudies-literature

Ionic Liquids Incorporating Polyamide 6: Miscibility and Physical Properties.

Project description:The effects of 1-vinyl-3-butyl imidazole chloride (VBIM) on the structure and properties of Polyamide 6 (PA6) were investigated systematically. It was found that PA6/VBIM blends were homogeneous without phase separation. The glass transition temperature (Tg) of PA6 increased with small VBIM loadings followed by the decreasing in Tg with further increasing the amount of VBIM. The crystallization temperature decreased with the addition of VBIM because of the strong interactions between VBIM and the PA6 matrix, as well as the dilution effect when large amounts of VBIM was introduced to the matrix. According to rheological testing, small amounts of VBIM enhanced the storage modulus and melt viscosity of PA6. Tensile tests also show an increase in strength and modulus at relatively low loadings of VBIM. The strength of PA6 with only 1 wt % VBIM improved by 108% compared to that of neat PA6. Fourier transform infrared (FTIR) investigations revealed that the ions of VBIM preferred to form hydrogen bonds with amide groups in PA6. Therefore, VBIM acts as physical connection point for the neighboring PA6 molecular chains. The specific interactions between VBIM and PA6 account not only for the enhanced melt viscosity of PA6, but also for the improved mechanical properties. Moreover, outstanding antistatic property was also observed. The surface resistivity of the sample with 1 wt % VBIM was 1.50 × 1010 ?/sq, which means good electric dissipation property.

| S-EPMC6415449 | biostudies-literature

Densities, Viscosities and Derived Thermophysical Properties of Water-Saturated Imidazolium-Based Ionic Liquids.

Project description:In order to evaluate the impact of the alkyl side chain length and symmetry of the cation on the thermophysical properties of water-saturated ionic liquids (ILs), densities and viscosities as a function of temperature were measured at atmospheric pressure and in the (298.15 to 363.15) K temperature range, for systems containing two series of bis(trifluoromethylsulfonyl)imide-based compounds: the symmetric [C n C n im][NTf2] (with n = 1-8 and 10) and asymmetric [C n C1im][NTf2] (with n = 2-5, 7, 9 and 11) ILs. For water-saturated ILs, the density decreases with the increase of the alkyl side chain length while the viscosity increases with the size of the aliphatic tails. The saturation water solubility in each IL was further estimated with a reasonable agreement based on the densities of water-saturated ILs, further confirming that for the ILs investigated the volumetric mixing properties of ILs and water follow a near ideal behaviour. The water-saturated symmetric ILs generally present lower densities and viscosities than their asymmetric counterparts. From the experimental data, the isobaric thermal expansion coefficient and energy barrier were also estimated. A close correlation between the difference in the energy barrier values between the water-saturated and pure ILs and the water content in each IL was found, supporting that the decrease in the viscosity of ILs in presence of water is directly related with the decrease of the energy barrier.

| S-EPMC5024754 | biostudies-literature

Transcriptional toxicity of imidazolium- and cholinium-based ionic liquids

Project description:Ionic Liquids are a broad group of salts with low melting points that can be specifically tuned for a broad range of applications. Despite being initially considered “green” solvents, their better environmental friendliness compared to traditional solvents has been increasingly challenged. In this study, we aimed to investigate the molecular effects of ILs exposure by using RNA-sequencing to study differential gene expression patterns. Thus, we exposed Daphnia magna to 1-ethyl-3-methylimidazolium chloride ([C2mim]Cl), 1-dodecyl chloride-3-methylimidazolium ([C12mim]Cl) and cholinium chloride ([Chol]Cl). Results suggest that the three ILs share several mechanisms of toxicity, including cellular membrane and cytoskeleton damage, oxidative stress, inhibition of antioxidant enzymes, mitochondrial affectation, changes in protein biosynthesis and energy production, DNA damage, and ultimately, programmed cell death and disease initiation. Overall, the dataset revealed that [C2mim]Cl and [C12mim]Cl were, respectively, the least and the most toxic ILs at the transcriptional level. Also, it is reinforced that [Chol]Cl is not devoid of environmental hazardous potential. Unique gene expression signatures could also be identified for each IL.

2021-08-13 | GSE156769 | GEO

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data