Properties of water confined in ionic liquids.
Ontology highlight
ABSTRACT:
SUBMITTER: Saihara K
PROVIDER: S-EPMC4448549 | biostudies-other | 2015
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Over the past decade many works have focused on various aspects of the dynamics of liquids confined at the nanoscale such as e.g. water flow enhancement through carbon nanotubes (CNTs). Transport of room temperature ionic liquids (RTILs) through various nanochannels has also been explored and some conflicting findings about their translational dynamics have been reported. In this work, we focus on translational dynamics of RTILs confined in various CNTs. By means of molecular dynamics simulations we highlight a substantially enhanced diffusion of confined RTILs with an increase up to two orders of magnitude with respect to bulk-phase properties. This ultrafast diffusion of RTILs inside CNTs is shown to result from the combination of various factors such as low friction, molecular stacking, size, helicity, curvature and cooperative dynamics effects.
| S-EPMC4917821 | biostudies-literature
Project description:Liquid sensors composed of ionic liquids are rising as alternatives to solid semiconductors for flexible and self-healing electronics. However, the fluidic nature may give rise to leakage problems in cases of accidental damages. Here, we proposed a liquid sensor based on a binary ionic liquid system, in which a flowing ionic liquid [OMIm]PF6 is confined by another azobenzene-containing ionic liquid crystalline [OMIm]AzoO. Those crystal components provide sufficient pinning capillary force to immobilize fluidic components, leading to a freestanding liquid-like product without the possibility of leakage. In addition to owning ultra-high temperature sensitivity, crystal-confined ionic liquids also combine the performances of both liquid and solid so that it can be stretched, bent, self-healed, and remolded. With respect to the reconfigurable property, this particular class of ionic liquids is exploited as dynamic circuits which can be spatially reorganized or automatically repaired.
| S-EPMC6358609 | biostudies-literature
Project description:Ionic liquids are well known for their high gas absorption capacity. It is shown that this is not a solvent constant, but can be enhanced by another factor of 10 by pore confinement, here of the ionic liquid (IL) 1-ethyl-3-methylimidazolium acetate (EmimOAc) in the pores of carbon materials. A matrix of four different carbon compounds with micro- and mesopores as well as with and without nitrogen doping is utilized to investigate the influence of the carbons structure on the nitrogen uptake in the pore-confined EmimOAc. In general, the absorption is most improved for IL in micropores and in nitrogen-doped carbon. This effect is so large that it is already seen in TGA and DSC experiments. Due to the low vapor pressure of the IL, standard volumetric sorption experiments can be used to quantify details of this effect. It is reasoned that it is the change of the molecular arrangement of the ions in the restricted space of the pores that creates additional free volume to host molecular nitrogen.
| S-EPMC8251693 | biostudies-literature
Project description:In order to evaluate the impact of the alkyl side chain length and symmetry of the cation on the thermophysical properties of water-saturated ionic liquids (ILs), densities and viscosities as a function of temperature were measured at atmospheric pressure and in the (298.15 to 363.15) K temperature range, for systems containing two series of bis(trifluoromethylsulfonyl)imide-based compounds: the symmetric [C n C n im][NTf2] (with n = 1-8 and 10) and asymmetric [C n C1im][NTf2] (with n = 2-5, 7, 9 and 11) ILs. For water-saturated ILs, the density decreases with the increase of the alkyl side chain length while the viscosity increases with the size of the aliphatic tails. The saturation water solubility in each IL was further estimated with a reasonable agreement based on the densities of water-saturated ILs, further confirming that for the ILs investigated the volumetric mixing properties of ILs and water follow a near ideal behaviour. The water-saturated symmetric ILs generally present lower densities and viscosities than their asymmetric counterparts. From the experimental data, the isobaric thermal expansion coefficient and energy barrier were also estimated. A close correlation between the difference in the energy barrier values between the water-saturated and pure ILs and the water content in each IL was found, supporting that the decrease in the viscosity of ILs in presence of water is directly related with the decrease of the energy barrier.
| S-EPMC5024754 | biostudies-literature
Project description:A number of dicationic ionic liquids with a disiloxane linker between imidazolium cations and bis(trifluoromethylsulfonyl)imide anion were synthesized and characterized. Melting points, viscosity, and volatility in a vacuum were measured; the thermal and hydrolytic stability of ionic liquids were also studied. The dependence of the properties on the structure of substituents in the cation of the ionic liquid was demonstrated.
| S-EPMC7355833 | biostudies-literature
Project description:Ionic liquids are used in different processes owing to their low vapor pressure, large viscosity range, chemical and thermal stability, and superior conductance even without water. These features make them flexible and tunable, indicating their possible use as substitutes for commonly used compounds in many processes. The objective of this study was to evaluate the properties of aqueous binary solutions for three different ionic liquids (ILs): dibutylammonium acetate, dibutylammonium propanoate, and dibutylammonium butanoate. The measured properties were density, speed of sound, and conductivity, and their isentropic compressibility and thermal expansion coefficient were calculated based on these properties. The temperature range used for measurements was 293.15–323.15 K. Mathematical models were used for each ionic liquid + water mixture to fit the density and speed of sound data. The increase in the alkyl chain leads to a tendency to decrease the values of density, speed of sound, and conductivity of the solutions. However, decreasing the dilution in water, the density, the conductivity and the speed of sound initially increase and then decrease, exhibiting a maximum in the initial water concentration range which indicates the formation of aggregates. Critical micellar concentrations at 298 K were determined through conductivity data. Enhancing the temperature leads to a decrease on density and sound velocity. Supplementary Information The online version contains supplementary material available at 10.1007/s43153-021-00174-7.
| S-EPMC8591436 | biostudies-literature
Project description:Many chemical processes rely extensively on organic solvents posing safety and environmental concerns. For a successful transfer of some of those chemical processes and reactions to aqueous media, agents acting as solubilizers, or phase-modifiers, are of central importance. In the present work, the structure of aqueous solutions of several ionic liquid systems capable of forming multiple solubilizing environments were modeled by molecular dynamics simulations. The effect of small aliphatic chains on solutions of hydrophobic 1-alkyl-3-methylimidazolium bis(trifluoromethyl)sulfonylimide ionic liquids (with alkyl = propyl [C3C1im][NTf2], butyl [C4C1im][NTf2] and isobutyl [iC4C1im][NTf2]) are covered first. Next, we focus on the interactions of sulphonate- and carboxylate-based anions with different hydrogenated and perfluorinated alkyl side chains in solutions of [C2C1im][CnF2n+1SO3], [C2C1im][CnH2n+1SO3], [C2C1im][CF3CO2] and [C2C1im][CH3CO2] (n = 1, 4, 8). The last system considered is an ionic liquid completely miscible with water that combines the cation N-methyl-N,N,N-tris(2-hydroxyethyl)ammonium [N1 2OH 2OH 2OH]+, with high hydrogen-bonding capability, and the hydrophobic anion [NTf2]-. The interplay between short- and long-range interactions, clustering of alkyl and perfluoroalkyl tails, and hydrogen bonding enables a wealth of possibilities in tailoring an ionic liquid solution according to the needs.
| S-EPMC8658901 | biostudies-literature
Project description:This paper presents a comprehensive study of two alkylammonium nitrate ionic liquids. As part of this family of materials, mainly ethylammonium nitrate (EAN) and also propylammonium nitrate (PAN) have attracted a great deal of attention during the last decades due to their potential applications in many fields. Although there have been numerous publications focused on the measurement of their physical properties, a great dispersion can be observed in the results obtained for the same magnitude. One of the critical points to be taken into account in their physical characterization is their water content. Thus, the main objective of this work was to determine the degree of influence of the presence of small quantities of water in EAN and PAN on the measurement of density, viscosity, electrical conductivity, refractive index and surface tension. For this purpose, the first three properties were determined in samples of EAN and PAN with water contents below 30,000 ppm in a wide range of temperatures, between 5 and 95 °C, while the last two were obtained at 25 °C. As a result of this study, it has been concluded that the presence of water is critical in those physical properties that involve mass or charge transport processes, resulting in the finding that the absolute value of the average percentage change in both viscosity and electrical conductivity is above 40%. Meanwhile, refractive index (≤0.3%), density (≤0.5%) and surface tension (≤2%) present much less significant changes.
| S-EPMC8306069 | biostudies-literature
Project description:Ionic liquids are composed of equal quantities of positive and negative ions. In the bulk, electrical neutrality occurs in these liquids due to Coulombic ordering, in which ion shells of alternating charge form around a central ion. Their structure under confinement is far less well understood. This hinders the widespread application of ionic liquids in technological applications. Here we use scattering experiments to resolve the structure of a widely used ionic liquid (EMI-TFSI) when it is confined inside nanoporous carbons. We show that Coulombic ordering reduces when the pores can accommodate only a single layer of ions. Instead, equally charged ion pairs are formed due to the induction of an electric potential of opposite sign in the carbon pore walls. This non-Coulombic ordering is further enhanced in the presence of an applied external electric potential. This finding opens the door for the design of better materials for electrochemical applications.
| S-EPMC5702543 | biostudies-literature
Project description:By mimicking the water structure to improve the enzyme activity, we designed imidazolium (Im)-based ionic liquids (ILs) functionalized with both ether and tert-alcohol groups (e.g., [CH3(OCH2CH2) n -Im-t-BuOH][Tf2N]). This unique combination of the "water-like" structure enabled very high transesterification (synthetic) activities for immobilized lipase B from Candida antarctica, which are up to 2-4 folds higher than nonfunctionalized "classical" ionic liquids (such as [BMIM][Tf2N]) and up to 40-100% higher than diisopropyl ether and tert-butanol. Fluorescence emission spectra confirmed the general protein structural preservation in these tailored ionic solvents. In addition, functionalized ILs showed high thermal stabilities, which are comparable with diisopropyl ether but much higher than tert-butanol.
| S-EPMC6751713 | biostudies-literature