Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Silver/Polypyrrole-Functionalized Polyurethane Foam Embedded Phase Change Materials for Thermal Energy Harvesting.

ABSTRACT: Conversion of solar energy into thermal energy stored in phase change materials (PCMs) can effectively relieve the energy dilemma and improve energy utilization efficiency. However, facile fabrication of form-stable PCMs (FSPCMs) to achieve simultaneously energetic solar-thermal, conversion and storage remains a formidable challenge. Herein, we report a desirable solar-thermal energy conversion and storage system that utilizes paraffin (PW) as energy-storage units, the silver/polypyrrole-functionalized polyurethane (PU) foam as the cage and energy conversion platform to restrain the fluidity of the melting paraffin and achieve high solar-thermal energy conversion efficiency (93.7%) simultaneously. The obtained FSPCMs possess high thermal energy storage density (187.4 J/g) and an excellent leak-proof property. In addition, 200 accelerated solar-thermal energy conversion-cycling tests demonstrated that the resultant FSPCMs had excellent cycling durability and reversible solar-thermal energy conversion ability, which offered a potential possibility in the field of solar energy utilization technology.

SUBMITTER: Fan D

PROVIDER: S-EPMC8621923 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Ultra-high thermal effusivity materials for resonant ambient thermal energy harvesting.

Project description:Materials science has made progress in maximizing or minimizing the thermal conductivity of materials; however, the thermal effusivity-related to the product of conductivity and capacity-has received limited attention, despite its importance in the coupling of thermal energy to the environment. Herein, we design materials that maximize the thermal effusivity by impregnating copper and nickel foams with conformal, chemical-vapor-deposited graphene and octadecane as a phase change material. These materials are ideal for ambient energy harvesting in the form of what we call thermal resonators to generate persistent electrical power from thermal fluctuations over large ranges of frequencies. Theory and experiment demonstrate that the harvestable power for these devices is proportional to the thermal effusivity of the dominant thermal mass. To illustrate, we measure persistent energy harvesting from diurnal frequencies, extracting as high as 350?mV and 1.3?mW from approximately 10?°C diurnal temperature differences.

| S-EPMC5813115 | biostudies-literature

Flexible SbSI/Polyurethane Nanocomposite for Sensing and Energy Harvesting

Project description:The dynamic development of flexible wearable electronics creates new possibilities for the production and use of new types of sensors. Recently, polymer nanocomposites have gained great popularity in the fabrication of sensors. They possess both the mechanical advantages of polymers and the functional properties of nanomaterials. The main drawback of such systems is the complexity of their manufacturing. This article presents, for the first time, fabrication of an antimony sulfoiodide (SbSI) and polyurethane (PU) nanocomposite and its application as a piezoelectric nanogenerator for strain detection. The SbSI/PU nanocomposite was prepared using simple, fast, and efficient technology. It allowed the obtainment of a high amount of material without the need to apply complex chemical methods or material processing. The SbSI/PU nanocomposite exhibited high flexibility and durability. The microstructure and chemical composition of the prepared material were investigated using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS), respectively. These studies revealed a lack of defects in the material structure and relatively low agglomeration of nanowires. The piezoelectric response of SbSI/PU nanocomposite was measured by pressing the sample with a pneumatic actuator at different excitation frequencies. It is proposed that the developed nanocomposite can be introduced into the shoe sole in order to harvest energy from human body movement.

| S-EPMC9823892 | biostudies-literature

Thermal Energy Storage and Mechanical Performance of Crude Glycerol Polyurethane Composite Foams Containing Phase Change Materials and Expandable Graphite.

Project description:The aim of this study was to enhance the thermal comfort properties of crude glycerol (CG) derived polyurethane foams (PUFs) using phase change materials (PCMs) (2.5⁻10.0% (wt/wt)) to contribute to the reduction of the use of non-renewable resources and increase energy savings. The main challenge when adding PCM to PUFs is to combine the low conductivity of PUFs whilst taking advantage of the heat released/absorbed by PCMs to achieve efficient thermal regulation. The solution considered to overcome this limitation was to use expandable graphite (EG) (0.50⁻1.50% (wt/wt)). The results obtained show that the use of PCMs increased the heterogeneity of the foams cellular structure and that the incorporation of PCMs and EG increased the stiffness of the ensuing composite PUFs acting as filler-reinforcing materials. However, these fillers also caused a substantial increase of the thermal conductivity and density of the ensuing foams which limited their thermal energy storage. Therefore, numerical simulations were carried using a single layer panel and the thermal and physical properties measured to evaluate the behavior of a composite PUF panel with different compositions, and guide future formulations to attain more effective results in respect to temperature buffering and temperature peak delay.

| S-EPMC6212961 | biostudies-literature

Floating Oscillator-Embedded Triboelectric Generator for Versatile Mechanical Energy Harvesting.

Project description:A versatile vibration energy harvesting platform based on a triboelectricity is proposed and analyzed. External mechanical vibration repeats an oscillating motion of a polymer-coated metal oscillator floating inside a surrounding tube. Continuous sidewall friction at the contact interface of the oscillator induces current between the inner oscillator electrode and the outer tube electrode to convert mechanical vibrations into electrical energy. The floating oscillator-embedded triboelectric generator (FO-TEG) is applicable for both impulse excitation and sinusoidal vibration which universally exist in usual environment. For the impulse excitation, the generated current sustains and slowly decays by the residual oscillation of the floating oscillator. For the sinusoidal vibration, the output energy can be maximized by resonance oscillation. The operating frequency range can be simply optimized with high degree of freedom to satisfy various application requirements. In addition, the excellent immunity against ambient humidity is experimentally demonstrated, which stems from the inherently packaged structure of FO-TEG. The prototype device provides a peak-to-peak open-circuit voltage of 157 V and instantaneous short-circuit current of 4.6 μA, within sub-10 Hz of operating frequency. To visually demonstrate the energy harvesting behavior of FO-TEG, lighting of an array of LEDs is demonstrated using artificial vibration and human running.

| S-EPMC4639750 | biostudies-literature

All-Day Thermogalvanic Cells for Environmental Thermal Energy Harvesting.

Project description:Direct conversion of the tremendous and ubiquitous low-grade thermal energy into electricity by thermogalvanic cells is a promising strategy for energy harvesting. The environment is one of the richest and renewable low-grade thermal source. However, critical challenges remain for all-day electricity generation from environmental thermal energy due to the low frequency and small amplitude of temperature fluctuations in the environment. In this work, we report a tandem device consisting of a polypyrrole (PPy) broadband absorber/radiator, thermogalvanic cell, and thermal storage material (Cu foam/PEG1000) that integrates multiple functions of heating, cooling, and recycling of thermal energy. The thermogalvanic cell enables continuous utilization of environmental thermal energy at both daytime and nighttime, yielding maximum outputs as high as 0.6 W m-2 and 53 mW m-2, respectively. As demonstrated outdoors by a large-scale prototype module, this design offers a feasible and promising approach to all-day electricity generation from environmental thermal energy.

| S-EPMC6944521 | biostudies-literature

Charging-free electrochemical system for harvesting low-grade thermal energy.

Project description:Efficient and low-cost systems are needed to harvest the tremendous amount of energy stored in low-grade heat sources (<100 °C). Thermally regenerative electrochemical cycle (TREC) is an attractive approach which uses the temperature dependence of electrochemical cell voltage to construct a thermodynamic cycle for direct heat-to-electricity conversion. By varying temperature, an electrochemical cell is charged at a lower voltage than discharge, converting thermal energy to electricity. Most TREC systems still require external electricity for charging, which complicates system designs and limits their applications. Here, we demonstrate a charging-free TREC consisting of an inexpensive soluble Fe(CN)6(3-/4-) redox pair and solid Prussian blue particles as active materials for the two electrodes. In this system, the spontaneous directions of the full-cell reaction are opposite at low and high temperatures. Therefore, the two electrochemical processes at both low and high temperatures in a cycle are discharge. Heat-to-electricity conversion efficiency of 2.0% can be reached for the TREC operating between 20 and 60 °C. This charging-free TREC system may have potential application for harvesting low-grade heat from the environment, especially in remote areas.

| S-EPMC4260536 | biostudies-literature

Polyaspartamide Functionalized Catechol-Based Hydrogels Embedded with Silver Nanoparticles for Antimicrobial Properties.

Project description:In this study, polyaspartamide-based hydrogels were synthesized by boron-catechol coordination followed by incorporation of AgNPs into the materials. Free catechol moieties were exploited to produce AgNPs. TEM analyses displayed AgNPs of less than 20 nm in diameter and with minimum aggregation, attesting the role of hydrogels to act as an efficient template for the production of dispersed particles. XRD analyses confirmed the mean particle size using the Scherrer equation. Release kinetic studies were performed in DMEM medium, showing a slow release over a long time-period. Finally, the MIC and MBC were determined, demonstrating a bacteriostatic and bactericidal effect against Gram-positive S. aureus and Gram-negative E. coli.

| S-EPMC6290624 | biostudies-literature

Fire Suppression and Thermal Behavior of Biobased Rigid Polyurethane Foam Filled with Biomass Incineration Waste Ash.

Project description:Currently, there is great demand to implement circular economy principles and motivate producers of building materials to integrate into a closed loop supply chain system and improve sustainability of their end-product. Therefore, it is of great interest to replace conventional raw materials with inorganic or organic waste-based and filler-type additives to promote sustainability and the close loop chain. This article investigates the possibility of bottom waste incineration ash (WA) particles to be used as a flame retardant replacement to increase fire safety and thermal stability under higher temperatures. From 10 wt.% to 50 wt.% WA particles do not significantly deteriorate performance characteristics, such as compressive strength, thermal conductivity, and water absorption after 28 days of immersion, and at 32 °C WA particles improve the thermal stability of resultant PU foams. Furthermore, 50 wt.% WA particles reduce average heat release by 69% and CO2 and CO yields during fire by 76% and 77%, respectively. Unfortunately, WA particles do not act as a smoke suppressant and do not reduce smoke release rate.

| S-EPMC7182938 | biostudies-literature

Rational Design of a Polyurethane Foam.

Project description:Polyurethane (PU) foams are exceptionally versatile due to the nature of PU bond formation and the large variety of polymeric backbones and formulation components such as catalysts and surfactants. This versatility introduces a challenge, namely a near unlimited number of variables for formulating foams. In addition to this, PU foam development requires expert knowledge, not only in polyurethane chemistry but also in the art of evaluating the resulting foams. In this work, we demonstrate that a rational experimental design framework in conjunction with a design of experiments (DoE) approach reduces both the number of experiments required to understand the formulation space and reduces the need for tacit knowledge from a PU expert. We focus on an in-depth example where a catalyst and two surfactants of a known formulation are set as factors and foam physical properties are set as responses. An iterative DoE approach is used to generate a set of foams with substantially different cell morphology and hydrodynamic behaviour. We demonstrate that with 23 screening formulations and 16 final formulations, foam physical properties can be modelled from catalyst and surfactant loadings. This approach also allows for the exploration of relationships between the cell morphology of PU foam and its hydrodynamic behaviour.

| S-EPMC9736621 | biostudies-literature

Harvesting electrical energy from torsional thermal actuation driven by natural convection.

Project description:The development of practical, cost-effective systems for the conversion of low-grade waste heat to electrical energy is an important area of renewable energy research. We here demonstrate a thermal energy harvester that is driven by the small temperature fluctuations provided by natural convection. This harvester uses coiled yarn artificial muscles, comprising well-aligned shape memory polyurethane (SMPU) microfibers, to convert thermal energy to torsional mechanical energy, which is then electromagnetically converted to electrical energy. Temperature fluctuations in a yarn muscle, having a maximum hot-to-cold temperature difference of about 13 °C, were used to spin a magnetic rotor to a peak torsional rotation speed of 3,000 rpm. The electromagnetic energy generator converted the torsional energy to electrical energy, thereby producing an oscillating output voltage of up to 0.81 V and peak power of 4 W/kg, based on SMPU mass.

| S-EPMC5992175 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data