Browse
Submit Data
Databases
API
Help

Dataset Information

15 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Investigation of Dye Dopant Influence on Electrooptical and Morphology Properties of Polymeric Acceptor Matrix Dedicated for Ternary Organic Solar Cells.

ABSTRACT: The publication presents the results of investigations of the influence of dye dopant on the electrooptical and morphology properties of a polymeric donor:acceptor mixture. Ternary thin films (polymer:dye:fullerene) were investigated for potential application as an active layer in organic solar cells. The aim of the research is to determine the effect of selected dye materials (dye D131, dye D149, dye D205, dye D358) on the three-component layer and their potential usefulness as an additional donor in ternary cells, based on P3HT donor and PC71BM acceptor. UV-vis spectroscopy studies were performed, and absorption and luminescence spectra were determined. Ellipsometry parameters for single dye and ternary layers have been measured. The analyses were performed using the Raman spectroscopy method, and the Raman spectra of the mixtures and single components have been determined. Organic layers were prepared and studied using scanning electron microscope and atomic force microscope. For dyes, ultraviolet photoelectron spectroscopy and X-ray photoelectron spectroscopy studies were carried out and the ternary system was presented and analyzed in terms of energy bands.

SUBMITTER: Lewinska G

PROVIDER: S-EPMC8658881 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Peripheral Hole Acceptor Moieties on an Organic Dye Improve Dye-Sensitized Solar Cell Performance.

Project description:Investigation of charge transfer dynamics in dye-sensitized solar cells is of fundamental interest and the control of these dynamics is a key factor for developing more efficient solar cell devices. One possibility for attenuating losses through recombination between injected electrons and oxidized dye molecules is to move the positive charge further away from the metal oxide surface. For this purpose, a metal-free dye named E6 is developed, in which the chromophore core is tethered to two external triphenylamine (TPA) units. After photoinduced electron injection into TiO2, the remaining hole is rapidly transferred to a peripheral TPA unit. Electron-hole recombination is slowed down by 30% compared to a reference dye without peripheral TPA units. Furthermore, it is found that the added TPA moieties improve the electron blocking effect of the dye, retarding recombination of electrons from TiO2 to the cobalt-based electrolyte.

| S-EPMC5049646 | biostudies-literature

Coplanar Donor-?-Acceptor Dyes Featuring a Furylethynyl Spacer for Dye-Sensitized Solar Cells.

Project description:Coplanar metal-free organic dyes featuring a furylethynyl spacer with different donor residues (MeO-, MeS-, and Me?N-) have been synthesized. Density functional theory (DFT) calculations predicted that the Me?N- residue would facilitate more effective charge transfer from donor to acceptor than the MeO- and MeS- residues. In agreement with DFT calculations, the dye-sensitized solar cells (DSSCs) fabricated with the Me?N- functionalized dye exhibited the best power conversion efficiency (?), 2.88%. Furthermore, the effect of the furan spacer on the photophysical properties and DSSC parameters are discussed in comparison to a previously reported thiophene counterpart.

| S-EPMC6427565 | biostudies-literature

Tuning the Acceptor Unit of Push-Pull Porphyrazines for Dye-Sensitized Solar Cells.

Project description:A family of four push-pull porphyrazines of A3B type, where each unit A contains two peripheral propyl chains and the unit B is endowed with a carboxylic acid, were prepared. The carboxylic acid was attached to the β-position of the pyrrolic unit, either directly (Pz 10), or through cyanovinyl (Pz 11) and phenyl (Pz 7) groups. The fourth Pz (14) consisted in a pyrazinoporphyrazine wherein the dinitrogenated heterocycle provided intrinsic donor-acceptor character to the macrocycle and contained a carboxyphenyl substituent. The direct attachment of the carboxylic acid functions and their linkers to the porphyrazine core produces stronger perturbation on the electronic properties of the macrocycle, with respect to their connection through fused benzene or pyrazine rings in TT112 and 14, respectively. The HOMO and LUMO energies of the Pzs, which were estimated with DFT calculations, show little variation within the series, except upon introduction of the cyanovinyl spacer, which produces a decrease in both frontier orbital energetic levels. This effective interaction of cyanovinyl substitution with the macrocycle is also evidenced in UV/Vis spectroscopy, where a large splitting of the Q-band indicates strong desymmetrization of the Pz. The performance of the four Pzs as photosensitizers in DSSCs were also investigated.

| S-EPMC8068076 | biostudies-literature

Dopant-Free Triazatruxene-Based Hole Transporting Materials with Three Different End-Capped Acceptor Units for Perovskite Solar Cells.

Project description:A series of dopant-free D-?-A structural hole-transporting materials (HTMs), named as SGT-460, SGT-461, and SGT-462, incorporating a planner-type triazatruxene (TAT) core, thieno[3,2-b]indole (TI) ?-bridge and three different acceptors, 3-ethylthiazolidine-2,4-dione (ED), 3-(dicyano methylidene)indan-1-one (DI), and malononitrile (MN), were designed and synthesized for application in perovskite solar cells (PrSCs). The effect of three acceptor units in star-shaped D-?-A structured dopant-free HTMs on the photophysical and electrochemical properties and the photovoltaic performance were investigated compared to the reference HTM of 2,2',7,7'-tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9'-spirobifluorene (spiro-OMeTAD). Their highest occupied molecular orbital (HOMO) energy levels were positioned for efficient hole extraction from a MAPbCl3-xIx layer (5.43 eV). The hole mobility values of the HTMs without dopants were determined to be 7.59 × 10-5 cm2 V-1 s-1, 5.13 × 10-4 cm2 V-1 s-1, and 7.61 × 10-4 cm2 V-1 s-1 for SGT-460-, SGT-461-, and SGT-462-based films. The glass transition temperature of all HTMs showed higher than that of the spiro-OMeTAD. As a result, the molecular engineering of a planer donor core, ?-bridge, and end-capped acceptor led to good hole mobility, yielding 11.76% efficiency from SGT-462-based PrSCs, and it provides a useful insight into the synthesis of the next-generation of HTMs for PrSC application.

| S-EPMC7279385 | biostudies-literature

Data on the porphyrin effect and influence of dopant ions on Thaumatococcus daniellii dye as sensitizer in dye-sensitized solar cells.

Project description:In this work, data on the effect of porphyrin characteristic of UV/VIS absorption of Thaumatococcus daniellii (T. daniellii) dye-sensitized solar cells sensitized with different electrolytes were presented. The influence of dopants from 1?g/100?ml electrolyte: distilled water and applied time difference of 3?min is observed on the photovoltaic characteristics and performance of the deposited thin film. The output efficiency and incident photon to conversion efficiency of T. daniellii dye-sensitized solar cells was acquired and could be further used as a model for designing dye-sensitized solar models as substitute for silicon solar cells.

| S-EPMC6172415 | biostudies-other

Simultaneously enhancing the photovoltaic parameters of ternary organic solar cells by incorporating a fused ring electron acceptor.

Project description:The ternary strategy has been recognized as an effective method to improve the photovoltaic performance of organic solar cells (OSCs). In ternary OSCs, the complementary or broadened absorption spectrum, optimized morphology, and enhanced photovoltaic performance could be obtained by selecting a third rational component for the host system. In this work, a fused ring electron acceptor named BTMe-C8-2F, which possesses a high-lying lowest unoccupied molecular orbital (LUMO) energy level and a complementary absorption spectrum to PM6:Y6, was introduced to a PM6:Y6 binary system. The ternary blend film PM6:Y6:BTMe-C8-2F showed high and more balanced charge mobilities, and low charge recombination. Therefore, the OSC based on the PM6:Y6:BTMe-C8-2F (1 : 1.2 : 0.3, w/w/w) blend film achieved the highest power conversion efficiency (PCE) of 17.68%, with an open-circuit voltage (VOC) of 0.87 V, a short-circuit current (JSC) of 27.32 mA cm-2, and a fill factor (FF) of 74.05%, which are much higher than the binary devices of PM6:Y6 (PCE = 15.86%) and PM6:BTMe-C8-2F (PCE = 11.98%). This work provides more insight into the role of introducing a fused ring electron acceptor with a high-lying LUMO energy level and complementary spectrum for simultaneously enhancing the VOC and JSC to promote the performance of ternary OSCs.

| S-EPMC10251189 | biostudies-literature

2-Thiohydantoin Moiety as a Novel Acceptor/Anchoring Group of Photosensitizers for Dye-Sensitized Solar Cells.

Project description:Very recently, we have reported the synthesis and evaluation of biological properties of new merocyanine dyes composed of triphenylamine moiety, π-aromatic spacer, and rhodanine/2-thiohydantoin-based moiety. Interestingly, 2-thiohydantoin has never been studied before as an electron-accepting/anchoring group for the dye-sensitized solar cells (DSSCs). In the presented study, we examined the applicability of 2-thiohydantoin, an analog of rhodanine, in DSSC technology. The research included theoretical calculations, electrochemical measurements, optical characterization, and tests of the solar cells. As a result, we proved that 2-thiohydantoin might be considered as an acceptor/anchoring group since all the compounds examined in this study were active. The most efficient device showed power conversion efficiency of 2.59%, which is a promising value for molecules of such a simple structure. It was found that the cells' performances were mainly attributed to the dye loading and the ICT molecular absorption coefficients, both affected by the differences in the chemical structure of the dyes. Moreover, the effect of the aromatic spacer size and the introduction of carboxymethyl co-anchoring group on photovoltaic properties was observed and discussed.

| S-EPMC7254308 | biostudies-literature

Theoretical Investigation of Azobenzene-Based Photochromic Dyes for Dye-Sensitized Solar Cells.

Project description:Two donor-?-spacer-acceptor (D-?-A) organic dyes were designed as photochromic dyes with the same ?-spacer and acceptor but different donors, based on their electron-donating strength. Various structural, electronic, and optical properties, chemical reactivity parameters, and certain crucial factors that affect short-circuit current density (Jsc) and open circuit voltage (Voc) were investigated computationally using density functional theory and time-dependent density functional theory. The trans-cis isomerization of these azobenzene-based dyes and its effect on their properties was studied in detail. Furthermore, the dye-(TiO2)9 anatase nanoparticle system was simulated to understand the electronic structure of the interface. Based on the results, we justified how the trans-cis isomerization and different donor groups influence the physical properties as well as the photovoltaic performance of the resultant dye-sensitized solar cells (DSSCs). These theoretical calculations can be used for the rapid screening of promising dyes and their optimization for photochromic DSSCs.

| S-EPMC7279488 | biostudies-literature

Drug crystal growth in ternary amorphous solid dispersions: Effect of surfactants and polymeric matrix-carriers.

Project description:The present study evaluates the crystal growth rate of amorphous drugs when dispersed in different ternary polymeric amorphous solid dispersions (ASDs) in the presence of surfactants. Specifically, ternary ASDs of aprepitant (APT, selected as a model drug) were prepared via melt-quench cooling by evaluating three commonly used ASDs matrix/carriers, namely hydroxypropyl cellulose (HPC), poly(vinylpyrrolidone) (PVP) and the copolymer Soluplus® (SOL), and two suitable surfactants, namely d-alpha tocopheryl polyethylene glycol 1000 succinate (TPGS) and poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) (P407). Results showed that all components were completely miscible (verified via hot stage polarized microscopy) and both surfactants were acting as plasticizers to the API. APT's crystal growth rate was increased in the presence of both P407 and TPGS, while PVP was identified as the matrix/carrier with the greatest impact API's crystal growth rate inhibition. Interestingly, TPGS presented a noticeable synergistic effect when combined with PVP resulting in a further reduction of APT's crystal growth rate. Furthermore, evaluation of APT's nucleation induction time in dissolution medium (PBS pH 6.8) revealed PVP as the most effective crystallization inhibitor, whereas the addition of TPGS showed to improve PVP's ability to inhibit APT's recrystallization. Finally, the formation of intermolecular interactions in the ternary APT-PVP-TPGS provided an explanation for the observed PVP-TPGS synergistic effects, with molecular dynamics simulations being able to unravel the type and extent of these interactions on a theoretical basis.

| S-EPMC8193146 | biostudies-literature

Enhancement of p-type dye-sensitized solar cell performance by supramolecular assembly of electron donor and acceptor.

Project description:Supramolecular interactions based on porphyrin and fullerene derivatives were successfully adopted to improve the photovoltaic performance of p-type dye-sensitized solar cells (DSCs). Photoelectron spectroscopy (PES) measurements suggest a change in binding configuration of ZnTCPP after co-sensitization with C60PPy, which could be ascribed to supramolecular interaction between ZnTCPP and C60PPy. The performance of the ZnTCPP/C60PPy-based p-type DSC has been increased by a factor of 4 in comparison with the DSC with the ZnTCPP alone. At 560?nm, the IPCE value of DSCs based on ZnTCPP/C60PPy was a factor of 10 greater than that generated by ZnTCPP-based DSCs. The influence of different electrolytes on charge extraction and electron lifetime was investigated and showed that the enhanced Voc from the Co(2+/3+)(dtbp)3-based device is due to the positive EF shift of NiO.

| S-EPMC3945487 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data