Browse
Submit Data
Databases
API
Help

Dataset Information

27 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

New Methylene Blue Covalently Functionalized Graphene Oxide Nanocomposite as Interfacial Material for the Electroanalysis of Hydrogen Peroxide.

ABSTRACT: New methylene blue (NMB), a phenothiazine dye, was covalently bonded to graphene oxide (GO) using glutaraldehyde as a crosslinking agent, which was characterized by spectroscopic techniques and electrochemistry. The obtained GO-NMB nanocomposite was used as interface material to construct a novel electrochemical sensor for the determination of hydrogen peroxide (H₂O₂). The electrochemical sensor based on GO-NMB nanocomposite exhibited excellent electrocatalytic activity for the reduction of hydrogen peroxide (H₂O₂), which was also enhanced by GO within the GO-NMB nanocomposite. With the optimized experimental conditions, the developed sensor showed high sensitivity (79.4 μA mM^-1 cm^-2) for electrocatalytic determination of H₂O₂ at the applied potential of -0.50 V in the concentration range of 0.000333 to 2.28 mΜ. The low limit of detection (1.35 μM), good reproducibility, and high stability of the sensor suggests that the electrochemical sensor based on the GO-NMB nanocomposite possesses obvious advantages, which paves a new avenue to functionalize GO for obtaining electrode interface materials.

SUBMITTER: Chen J

PROVIDER: S-EPMC8677660 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Chitosan-Functionalized Graphene Nanocomposite Films: Interfacial Interplay and Biological Activity.

Project description:Graphene oxide (GO) has recently captured tremendous attention, but only few functionalized graphene derivatives were used as fillers, and insightful studies dealing with the thermal, mechanical, and biological effects of graphene surface functionalization are currently missing in the literature. Herein, reduced graphene oxide (rGO), phosphorylated graphene oxide (PGO), and trimethylsilylated graphene oxide (SiMe3GO) were prepared by the post-modification of GO. The electrostatic interactions of these fillers with chitosan afforded colloidal solutions that provide, after water evaporation, transparent and flexible chitosan-modified graphene films. All reinforced chitosan-graphene films displayed improved mechanical, thermal, and antibacterial (S. aureus, E. coli) properties compared to native chitosan films. Hemolysis, intracellular catalase activity, and hemoglobin oxidation were also observed for these materials. This study shows that graphene functionalization provides a handle for tuning the properties of graphene-reinforced nanocomposite films and customizing their functionalities.

| S-EPMC7078879 | biostudies-literature

Methylene Blue-Loaded Upconverting Hydrogel Nanocomposite: Potential Material for Near-Infrared Light-Triggered Photodynamic Therapy Application.

Project description:The property of upconverting nanoparticles to convert the low-energy near-infrared (NIR) light into high-energy visible light has made them a potential candidate for various biomedical applications including photodynamic therapy (PDT). In this work, we show how a surface functionalization approach on the nanoparticle can be used to develop a nanocomposite hydrogel which can be of potential use for the PDT application. The upconverting hydrogel nanocomposite was synthesized by reacting 10-undecenoic acid-capped Yb3+/Er3+-doped NaYF4 nanoparticles with the thermosensitive N-isopropylacrylamide monomer. The formation of hydrogel was completed within 15 min and hydrogel nanocomposites showed strong enhancement in the visible light emission compared to the emission obtained from 10-undecenoic acid-capped Yb3+/Er3+-doped NaYF4 nanoparticles via the upconversion process (under 980 nm laser excitation). The upconverting hydrogel nanocomposites displayed high swelling behavior in water because of their porous nature. The porous structure ensured a higher loading of methylene blue dye (∼78% in 1 h) into the upconverting hydrogel, which was achieved via the swelling diffusion phenomenon. Upon excitation with the NIR light, the visible light emitted from the hydrogel activated the photosensitizer methylene blue which generated reactive oxygen species. Our results were able to show that the methylene blue-loaded composite hydrogel can be a potential platform for the future of NIR-triggered PDT in skin cancer treatment.

| S-EPMC6649247 | biostudies-literature

Bio-functionalized graphene-graphene oxide nanocomposite based electrochemical immunosensing.

Project description:We report a novel in-situ electrochemical synthesis approach for the formation of functionalized graphene-graphene oxide (fG-GO) nanocomposite on screen-printed electrodes (SPE). Electrochemically controlled nanocomposite film formation was studied by transmission electron microscopy (TEM) and Raman spectroscopy. Further insight into the nanocomposite has been accomplished by the Fourier transformed infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA) and X-ray diffraction (XRD) spectroscopy. Configured as a highly responsive screen-printed immunosensor, the fG-GO nanocomposite on SPE exhibits electrical and chemical synergies of the nano-hybrid functional construct by combining good electronic properties of functionalized graphene (fG) and the facile chemical functionality of graphene oxide (GO) for compatible bio-interface development using specific anti-diuron antibody. The enhanced electrical properties of nanocomposite biofilm demonstrated a significant increase in electrochemical signal response in a competitive inhibition immunoassay format for diuron detection, promising its potential applicability for ultra-sensitive detection of range of target analytes.

| S-EPMC4193797 | biostudies-literature

Structural determination of Enzyme-Graphene Nanocomposite Sensor Material.

Project description:State-of-the-art ultra-sensitive blood glucose-monitoring biosensors, based on glucose oxidase (GOx) covalently linked to a single layer graphene (SLG), will be a valuable next generation diagnostic tool for personal glycemic level management. We report here our observations of sensor matrix structure obtained using a multi-physics approach towards analysis of small-angle neutron scattering (SANS) on graphene-based biosensor functionalized with GOx under different pH conditions for various hierarchical GOx assemblies within SLG. We developed a methodology to separately extract the average shape of GOx molecules within the hierarchical assemblies. The modeling is able to resolve differences in the average GOx dimer structure and shows that treatment under different pH conditions lead to differences within the GOx at the dimer contact region with SLG. The coupling of different analysis methods and modeling approaches we developed in this study provides a universal approach to obtain detailed structural quantifications, for establishing robust structure-property relationships. This is an essential step to obtain an insight into the structure and function of the GOx-SLG interface for optimizing sensor performance.

| S-EPMC6820869 | biostudies-literature

Methylene blue covalently attached to single stranded DNA as electroactive label for potential bioassays.

Project description:Methylene blue is an electroactive molecule that has been employed for the detection of the DNA hybridization event in electrochemical sensors. However, its use as a covalent label is very scarce and in most of the cases, non-covalent interactions (hydrophobic, electrostatic) are employed. Although it has advantages as simplicity and fewer number of procedure steps, the covalent attachment is less exploited in the development of these sensors. In this article, the electrochemical behavior of methylene blue attached to different DNA-strands is studied. Several lengths (15- and 30-mer) and different degree of DNA modification (MB-DNA, MB-DNA-MB and MB-DNA-SH) have been studied. The highest signals were obtained for longer strands with two MB molecules. In all the cases the signal is enhanced by CNT-nanostructuration of the electrode. Adsorption on these modified screen-printed electrodes allowed the amplification by employing an accumulation time. In this way, a sensitivity of -0.2864 ?A ?M-1 and a limit of detection of 800 nM for a 120 s accumulation time were obtained.

| S-EPMC7127606 | biostudies-literature

The Adsorption of Methylene Blue on Eco-Friendly Reduced Graphene Oxide.

Project description:Recently, green-prepared oxidized graphenes have attracted huge interest in water purification and wastewater treatment. Herein, reduced graphene oxide (rGO) was prepared by a scalable and eco-friendly method, and its potential use for the removal of methylene blue (MB) from water systems, was explored. The present work includes the green protocol to produce rGO and respective spectroscopical and morphological characterizations, as well as several kinetics, isotherms, and thermodynamic analyses to successfully demonstrate the adsorption of MB. The pseudo-second-order model was appropriated to describe the adsorption kinetics of MB onto rGO, suggesting an equilibrium time of 30 min. Otherwise, the Langmuir model was more suitable to describe the adsorption isotherms, indicating a maximum adsorption capacity of 121.95 mg g-1 at 298 K. In addition, kinetics and thermodynamic analyses demonstrated that the adsorption of MB onto rGO can be treated as a mixed physisorption-chemisorption process described by H-bonding, electrostatic, and ? - ? interactions. These results show the potential of green-prepared rGO to remove cationic dyes from wastewater systems.

| S-EPMC7221676 | biostudies-literature

Methylene Blue Dye Adsorption from Wastewater Using Hydroxyapatite/Gold Nanocomposite: Kinetic and Thermodynamics Studies.

Project description:The present work demonstrates the development of hydroxyapatite (HA)/gold (Au) nanocomposites to increase the adsorption of methylene blue (MB) dye from the wastewater. HA nanopowder was prepared via a wet chemical precipitation method by means of Ca(OH)2 and H3PO4 as starting materials. The biosynthesis of gold nanoparticles (AuNPs) has been reported for the first time by using the plant extract of Acrocarpus fraxinifolius. Finally, the as-prepared HA nanopowder was mixed with an optimized AuNPs solution to produce HA/Au nanocomposite. The prepared HA/Au nanocomposite was studied by using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and Scanning Electron Microscopy (SEM) with Energy Dispersive X-Ray Analysis (EDX) analysis. Adsorption studies were executed by batch experiments on the synthesized composite. The effect of the amount of adsorbent, pH, dye concentration and temperature was studied. Pseudo-first-order and pseudo-second-order models were used to fit the kinetic data and the kinetic modeling results reflected that the experimental data is perfectly matched with the pseudo-first-order kinetic model. The dye adsorbed waste materials have also been investigated against Pseudomonas aeruginosa, Micrococcus luteus, and Staphylococcus aureus bacteria by the agar well diffusion method. The inhibition zones of dye adsorbed samples are more or less the same as compared to as-prepared samples. The results so obtained indicates the suitability of the synthesized sample to be exploited as an adsorbent for effective treatment of MB dye from wastewater and dye adsorbed waste as an effective antibacterial agent from an economic point of view.

| S-EPMC8227305 | biostudies-literature

Electrochemically derived functionalized graphene for bulk production of hydrogen peroxide.

Project description:On-site peroxide generation via electrochemical reduction is gaining tremendous attention due to its importance in many fields, including water treatment technologies. Oxidized graphitic carbon-based materials have been recently proposed as an alternative to metal-based catalysts in the electrochemical oxygen reduction reaction (ORR), and in this work we unravel the role of C=O groups in graphene towards sustainable peroxide formation. We demonstrate a versatile single-step electrochemical exfoliation of graphite to graphene with a controllable degree of oxygen functionalities and thickness, leading to the formation of large quantities of functionalized graphene with tunable rate parameters, such as the rate constant and exchange current density. Higher oxygen-containing exfoliated graphene is known to undergo a two-electron reduction path in ORR having an efficiency of about 80 ± 2% even at high overpotential. Bulk production of H2O2 via electrolysis was also demonstrated at low potential (0.358 mV vs RHE), yielding ≈34 mg/L peroxide with highly functionalized (≈23 atom %) graphene and ≈16 g/L with low functionalized (≈13 atom %) graphene, which is on par with the peroxide production using state-of-the-art precious-metal-based catalysts. Hence this method opens a new scheme for the single-step large-scale production of functionalized carbon-based catalysts (yield ≈45% by weight) that have varying functionalities and can deliver peroxide via the electrochemical ORR process.

| S-EPMC7082696 | biostudies-literature

Functionalized Attapulgite for the Adsorption of Methylene Blue: Synthesis, Characterization, and Adsorption Mechanism.

Project description:Attapulgite (denoted as APT, also called palygorskite) has been regarded as the green material in the "21st century world" and has attracted widespread attention due to its advantages of low cost, natural abundance, nontoxic nature, and environmental friendliness. However, the limited adsorption sites and surface charges of natural APT greatly hinder its application as an adsorbent in industrial fields. In this work, natural APT was modified with sodium humate (SA) via a facile one-step hydrothermal process to improve its adsorption capacity and systematically studied its ability to remove methylene blue (MB) from aqueous solutions. The effect of hydrothermal modification in the presence of SA on the microscopic structure, morphology, and physicochemical properties of APT was studied by field-emission scanning electron microscopy, Fourier transform infrared spectrometry, X-ray diffraction, and Brunauer-Emmett-Teller analyses. The adsorption properties of the modified APT toward MB were evaluated systematically. The results demonstrated that the modified APT has a high adsorption capacity of 227.27 mg/g and also shows a high removal rate up to 99.7% toward MB in a dye solution with an initial concentration of 150 mg/L, which was a 64.7% increase as compared to that of raw APT. The adsorption kinetics could be fitted to the pseudo-second-order model, while the adsorption isotherm could be well-described with the Langmuir model. It was concluded that electrostatic attraction, hydrogen-bonding interaction, and chemical association are the main driving force during the adsorption process.

| S-EPMC8340108 | biostudies-literature

Antibacterial Performance of a Mussel-Inspired Polydopamine-Treated Ag/Graphene Nanocomposite Material.

Project description:Graphene-based nanocomposites have attracted tremendous attention in recent years. In this study, a facile yet effective approach was developed to synthesize reduced graphene oxide and an Ag-graphene nanocomposite. The basic strategy involved in the preparation of reduced graphene oxide includes reducing graphene oxide with dopamine, followed by in situ syntheses of the Ag-PDA-reducing graphene oxide (RGO) nanocomposite through adding AgNO3 solution and a small amount of dopamine. The nanocomposite was characterized by transmission electron microscopy (TEM), atomic force microscopy (AFM), X-ray diffraction (XRD), FTIR spectra, Raman spectra, ultraviolet-visible (UV-vis), and X-ray photoelectron spectroscopy (XPS), results indicated that a uniform PDA film is formed on the surface of the GO and GO is successfully reduced. Besides, the in situ synthesized Ag nanoparticles (AgNPs) were evenly distributed on the RGO surface. To investigate antibacterial properties Ag-PDA-RGO, different dosages were selected for evaluating the antibacterial activity against Gram-positive bacteria Staphylococcus aureus and Gram-negative bacteria Escherichia coli. The Ag-PDA-RGO nanocomposites displayed excellent antibacterial property. The antibacterial ratio reached 99.9% against S. aureus and 90.9% against E. coli when the dosage of 100 mg/L Ag-PDA-RGO nanocomposites was 100 μL. The novel Ag-PDA-RGO nanocomposite prepared by a facile yet effective, environmentally friendly, and low-cost method holds great promise in a wide range of modern biomedical applications.

| S-EPMC6829421 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data