Gene-Based Testing of Interactions Using XGBoost in Genome-Wide Association Studies.
Ontology highlight
ABSTRACT:
SUBMITTER: Guo Y
PROVIDER: S-EPMC8716787 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Detection of gene-gene interaction has become increasingly popular over the past decade in genome wide association studies (GWAS). Besides traditional logistic regression analysis for detecting interactions between two markers, new methods have been developed in recent years such as comparing linkage disequilibrium (LD) in case and control groups. All these methods form the building blocks of most screening strategies for disease susceptibility loci in GWAS. In this paper, we are interested in comparing the competing methods and providing practical guidelines for selecting appropriate testing methods for interaction in GWAS. We first review a series of existing statistical methods to detect interactions, and then examine different definitions of interactions to gain insight into the theoretical relationship between the existing testing methods. Lastly, we perform extensive simulations to compare powers of various methods to detect either interaction between two markers at two unlinked loci or the overall association allowing for both interaction and main effects. This investigation reveals informative characteristics of various methods that are helpful to GWAS investigators.
| S-EPMC4487553 | biostudies-literature
Project description:Genome-wide association (GWA) studies have been extremely successful in identifying novel loci contributing effects to a wide range of complex human traits. However, despite this success, the joint marginal effects of these loci account for only a small proportion of the heritability of these traits. Interactions between variants in different loci are not typically modelled in traditional GWA analysis, but may account for some of the missing heritability in humans, as they do in other model organisms. One of the key challenges in performing gene-gene interaction studies is the computational burden of the analysis. We propose a two-stage interaction analysis strategy to address this challenge in the context of both quantitative traits and dichotomous phenotypes. We have performed simulations to demonstrate only a negligible loss in power of this two-stage strategy, while minimizing the computational burden. Application of this interaction strategy to GWA studies of T2D and obesity highlights potential novel signals of association, which warrant follow-up in larger cohorts.
| S-EPMC3410530 | biostudies-literature
Project description:The study of gene-environment interactions is an increasingly important aspect of genetic epidemiological investigation. Historically, it has been difficult to study gene-environment interactions using a family-based design for quantitative traits or when parent-offspring trios were incomplete. The QBAT-I provides researchers a tool to estimate and test for a gene-environment interaction in families of arbitrary structure that are sampled without regard to the phenotype of interest, but is vulnerable to inflated type I error if families are ascertained on the basis of the phenotype. In this study, we verified the potential for type I error of the QBAT-I when applied to samples ascertained on a trait of interest. The magnitude of the inflation increases as the main genetic effect increases and as the ascertainment becomes more extreme. We propose an ascertainment-corrected score test that allows the use of the QBAT-I to test for gene-environment interactions in ascertained samples. Our results indicate that the score test and an ad hoc method we propose can often restore the nominal type I error rate, and in cases where complete restoration is not possible, dramatically reduce the inflation of the type I error rate in ascertained samples.
| S-EPMC4041108 | biostudies-literature
Project description:In complex disorders, independently evolving locus pairs might interact to confer disease susceptibility, with only a modest effect at each locus. With genome-wide association studies on large cohorts, testing all pairs for interaction confers a heavy computational burden, and a loss of power due to large Bonferroni-like corrections. Correspondingly, limiting the tests to pairs that show marginal effect at either locus, also has reduced power. Here, we describe an algorithm that discovers interacting locus pairs without explicitly testing all pairs, or requiring a marginal effect at each locus. The central idea is a mathematical transformation that maps 'statistical correlation between locus pairs' to 'distance between two points in a Euclidean space'. This enables the use of geometric properties to identify proximal points (correlated locus pairs), without testing each pair explicitly. For large datasets (? 10(6) SNPs), this reduces the number of tests from 10(12) to 10(6), significantly reducing the computational burden, without loss of power. The speed of the test allows for correction using permutation-based tests. The algorithm is encoded in a tool called RAPID (RApid Pair IDentification) for identifying paired interactions in case-control GWAS.We validated RAPID with extensive tests on simulated and real datasets. On simulated models of interaction, RAPID easily identified pairs with small marginal effects. On the benchmark disease, datasets from The Wellcome Trust Case Control Consortium, RAPID ran in about 1 CPU-hour per dataset, and identified many significant interactions. In many cases, the interacting loci were known to be important for the disease, but were not individually associated in the genome-wide scan.http://bix.ucsd.edu/projects/rapid.
| S-EPMC3493125 | biostudies-literature
Project description:BACKGROUND: Single Nucleotide Polymorphism (SNP) analysis only captures a small proportion of associated genetic variants in Genome-Wide Association Studies (GWAS) partly due to small marginal effects. Pathway level analysis incorporating prior biological information offers another way to analyze GWAS's of complex diseases, and promises to reveal the mechanisms leading to complex diseases. Biologically defined pathways are typically comprised of numerous genes. If only a subset of genes in the pathways is associated with disease then a joint analysis including all individual genes would result in a loss of power. To address this issue, we propose a pathway-based method that allows us to test for joint effects by using a pre-selected gene subset. In the proposed approach, each gene is considered as the basic unit, which reduces the number of genetic variants considered and hence reduces the degrees of freedom in the joint analysis. The proposed approach also can be used to investigate the joint effect of several genes in a candidate gene study. RESULTS: We applied this new method to a published GWAS of psoriasis and identified 6 biologically plausible pathways, after adjustment for multiple testing. The pathways identified in our analysis overlap with those reported in previous studies. Further, using simulations across a range of gene numbers and effect sizes, we demonstrate that the proposed approach enjoys higher power than several other approaches to detect associated pathways. CONCLUSIONS: The proposed method could increase the power to discover susceptibility pathways and to identify associated genes using GWAS. In our analysis of genome-wide psoriasis data, we have identified a number of relevant pathways for psoriasis.
| S-EPMC3033801 | biostudies-literature
Project description:It is believed that almost all common diseases are the consequence of complex interactions between genetic markers and environmental factors. However, few such interactions have been documented to date. Conventional statistical methods for detecting gene and environmental interactions are often based on the linear regression model, which assumes a linear interaction effect. In this study, we propose a nonparametric partition-based approach that is able to capture complex interaction patterns. We apply this method to the real data set of hypertension provided by Genetic Analysis Workshop 18. Compared with the linear regression model, the proposed approach is able to identify many additional variants with significant gene-environmental interaction effects. We further investigate one single-nucleotide polymorphism identified by our method and show that its gene-environmental interaction effect is, indeed, nonlinear. To adjust for the family dependence of phenotypes, we apply different permutation strategies and investigate their effects on the outcomes.
| S-EPMC4143762 | biostudies-literature
Project description:Among the various statistical methods for identifying gene?gene interactions in qualitative genome-wide association studies (GWAS), gene-based methods have recently grown in popularity because they confer advantages in both statistical power and biological interpretability. However, most of these methods make strong assumptions about the form of the relationship between traits and single-nucleotide polymorphisms, which result in limited statistical power. In this paper, we propose a gene-based method based on the distance correlation coefficient called gene-based gene-gene interaction via distance correlation coefficient (GBDcor). The distance correlation (dCor) is a measurement of the dependency between two random vectors with arbitrary, and not necessarily equal, dimensions. We used the difference in dCor in case and control datasets as an indicator of gene?gene interaction, which was based on the assumption that the joint distribution of two genes in case subjects and in control subjects should not be significantly different if the two genes do not interact. We designed a permutation-based statistical test to evaluate the difference between dCor in cases and controls for a pair of genes, and we provided the p-value for the statistic to represent the significance of the interaction between the two genes. In experiments with both simulated and real-world data, our method outperformed previous approaches in detecting interactions accurately.
| S-EPMC6316506 | biostudies-literature
Project description:Various methods have been developed for identifying gene-gene interactions in genome-wide association studies (GWAS). However, most methods focus on individual markers as the testing unit, and the large number of such tests drastically erodes statistical power. In this study, we propose novel interaction tests of quantitative traits that are gene-based and that confer advantage in both statistical power and biological interpretation. The framework of gene-based gene-gene interaction (GGG) tests combine marker-based interaction tests between all pairs of markers in two genes to produce a gene-level test for interaction between the two. The tests are based on an analytical formula we derive for the correlation between marker-based interaction tests due to linkage disequilibrium. We propose four GGG tests that extend the following P value combining methods: minimum P value, extended Simes procedure, truncated tail strength, and truncated P value product. Extensive simulations point to correct type I error rates of all tests and show that the two truncated tests are more powerful than the other tests in cases of markers involved in the underlying interaction not being directly genotyped and in cases of multiple underlying interactions. We applied our tests to pairs of genes that exhibit a protein-protein interaction to test for gene-level interactions underlying lipid levels using genotype data from the Atherosclerosis Risk in Communities study. We identified five novel interactions that are not evident from marker-based interaction testing and successfully replicated one of these interactions, between SMAD3 and NEDD9, in an independent sample from the Multi-Ethnic Study of Atherosclerosis. We conclude that our GGG tests show improved power to identify gene-level interactions in existing, as well as emerging, association studies.
| S-EPMC3585009 | biostudies-literature
Project description:Because common complex diseases are affected by multiple genes and environmental factors, it is essential to investigate gene-gene and/or gene-environment interactions to understand genetic architecture of complex diseases. After the great success of large scale genome-wide association (GWA) studies using the high density single nucleotide polymorphism (SNP) chips, the study of gene-gene interaction becomes a next challenge. Multifactor dimensionality reduction (MDR) analysis has been widely used for the gene-gene interaction analysis. In practice, however, it is not easy to perform high order gene-gene interaction analyses via MDR in genome-wide level because it requires exploring a huge search space and suffers from a computational burden due to high dimensionality.We propose dimensional reduction analysis, Gene-MDR analysis for the fast and efficient high order gene-gene interaction analysis. The proposed Gene-MDR method is composed of two-step applications of MDR: within- and between-gene MDR analyses. First, within-gene MDR analysis summarizes each gene effect via MDR analysis by combining multiple SNPs from the same gene. Second, between-gene MDR analysis then performs interaction analysis using the summarized gene effects from within-gene MDR analysis. We apply the Gene-MDR method to bipolar disorder (BD) GWA data from Wellcome Trust Case Control Consortium (WTCCC). The results demonstrate that Gene-MDR is capable of detecting high order gene-gene interactions associated with BD.By reducing the dimension of genome-wide data from SNP level to gene level, Gene-MDR efficiently identifies high order gene-gene interactions. Therefore, Gene-MDR can provide the key to understand complex disease etiology.
| S-EPMC3372457 | biostudies-literature
Project description:With the recent advent of high-throughput genotyping techniques, genetic data for genome-wide association studies (GWAS) have become increasingly available, which entails the development of efficient and effective statistical approaches. Although many such approaches have been developed and used to identify single-nucleotide polymorphisms (SNPs) that are associated with complex traits or diseases, few are able to detect gene-gene interactions among different SNPs. Genetic interactions, also known as epistasis, have been recognized to play a pivotal role in contributing to the genetic variation of phenotypic traits. However, because of an extremely large number of SNP-SNP combinations in GWAS, the model dimensionality can quickly become so overwhelming that no prevailing variable selection methods are capable of handling this problem. In this paper, we present a statistical framework for characterizing main genetic effects and epistatic interactions in a GWAS study. Specifically, we first propose a two-stage sure independence screening (TS-SIS) procedure and generate a pool of candidate SNPs and interactions, which serve as predictors to explain and predict the phenotypes of a complex trait. We also propose a rates adjusted thresholding estimation (RATE) approach to determine the size of the reduced model selected by an independence screening. Regularization regression methods, such as LASSO or SCAD, are then applied to further identify important genetic effects. Simulation studies show that the TS-SIS procedure is computationally efficient and has an outstanding finite sample performance in selecting potential SNPs as well as gene-gene interactions. We apply the proposed framework to analyze an ultrahigh-dimensional GWAS data set from the Framingham Heart Study, and select 23 active SNPs and 24 active epistatic interactions for the body mass index variation. It shows the capability of our procedure to resolve the complexity of genetic control.
| S-EPMC4595934 | biostudies-literature