Browse
Submit Data
Databases
API
Help

Dataset Information

30 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Scintillation Response Enhancement in Nanocrystalline Lead Halide Perovskite Thin Films on Scintillating Wafers.

ABSTRACT: Lead halide perovskite nanocrystals of the formula CsPbBr₃ have recently been identified as potential time taggers in scintillating heterostructures for time-of-flight positron emission tomography (TOF-PET) imaging thanks to their ultrafast decay kinetics. This study investigates the potential of this material experimentally. We fabricated CsPbBr₃ thin films on scintillating GGAG:Ce (Gd_2.985Ce_0.015Ga_2.7Al_2.3O₁₂) wafer as a model structure for the future sampling detector geometry. We focused this study on the radioluminescence (RL) response of this composite material. We compare the results of two spin-coating methods, namely the static and the dynamic process, for the thin film preparation. We demonstrated enhanced RL intensity of both CsPbBr₃ and GGAG:Ce scintillating constituents of a composite material. This synergic effect arises in both the RL spectra and decays, including decays in the short time window (50 ns). Consequently, this study confirms the applicability of CsPbBr₃ nanocrystals as efficient time taggers for ultrafast timing applications, such as TOF-PET.

SUBMITTER: Decka K

PROVIDER: S-EPMC8746850 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

X-ray Scintillation in Lead Halide Perovskite Crystals.

Project description:Current technologies for X-ray detection rely on scintillation from expensive inorganic crystals grown at high-temperature, which so far has hindered the development of large-area scintillator arrays. Thanks to the presence of heavy atoms, solution-grown hybrid lead halide perovskite single crystals exhibit short X-ray absorption length and excellent detection efficiency. Here we compare X-ray scintillator characteristics of three-dimensional (3D) MAPbI3 and MAPbBr3 and two-dimensional (2D) (EDBE)PbCl4 hybrid perovskite crystals. X-ray excited thermoluminescence measurements indicate the absence of deep traps and a very small density of shallow trap states, which lessens after-glow effects. All perovskite single crystals exhibit high X-ray excited luminescence yields of >120,000 photons/MeV at low temperature. Although thermal quenching is significant at room temperature, the large exciton binding energy of 2D (EDBE)PbCl4 significantly reduces thermal effects compared to 3D perovskites, and moderate light yield of 9,000 photons/MeV can be achieved even at room temperature. This highlights the potential of 2D metal halide perovskites for large-area and low-cost scintillator devices for medical, security and scientific applications.

| S-EPMC5111063 | biostudies-literature

Time-Dependent Field Effect in Three-Dimensional Lead-Halide Perovskite Semiconductor Thin Films.

Project description:Charge transport in three-dimensional metal-halide perovskite semiconductors is due to a complex combination of ionic and electronic contributions, and its study is particularly relevant in light of their successful applications in photovoltaics as well as other opto- and microelectronic applications. Interestingly, the observation of field effect at room temperature in transistors based on solution-processed, polycrystalline, three-dimensional perovskite thin films has been elusive. In this work, we study the time-dependent electrical characteristics of field-effect transistors based on the model methylammonium lead iodide semiconductor and observe the drastic variations in output current, and therefore of apparent charge carrier mobility, as a function of the applied gate pulse duration. We infer this behavior to the accumulation of ions at the grain boundaries, which hamper the transport of carriers across the FET channel. This study reveals the dynamic nature of the field effect in solution-processed metal-halide perovskites and offers an investigation methodology useful to characterize charge carrier transport in such emerging semiconductors.

| S-EPMC8552216 | biostudies-literature

Electron-Beam Irradiation Induced Regulation of Surface Defects in Lead Halide Perovskite Thin Films.

Project description:Organic-inorganic hybrid perovskites (OIHPs) have been intensively studied due to their fascinating optoelectronic performance. Electron microscopy and related characterization techniques are powerful to figure out their structure-property relationships at the nanoscale. However, electron beam irradiation usually causes damage to these beam-sensitive materials and thus deteriorates the associated devices. Taking a widely used CH3NH3PbI3 film as an example, here, we carry out a comprehensive study on how electron beam irradiation affects its properties. Interestingly, our results reveal that photoluminescence (PL) intensity of the film can be significantly improved along with blue-shift of emission peak at a specific electron beam dose interval. This improvement stems from the reduction of trap density at the CH3NH3PbI3 surface. The knock-on effect helps expose a fresh surface assisted by the surface defect-induced lowering of displacement threshold energy. Meanwhile, the radiolysis process consistently degrades the crystal structure and weaken the PL emission with the increase of electron beam dose. Consequently, the final PL emission comes from a balance between knock-on and radiolysis effects. Taking advantage of the defect regulation, we successfully demonstrate a patterned CH3NH3PbI3 film with controllable PL emission and a photodetector with enhanced photocurrent. This work will trigger the application of electron beam irradiation as a powerful tool for perovskite materials processing in micro-LEDs and other optoelectronic applications.

| S-EPMC8214510 | biostudies-literature

Photocurrent Enhancement by Copper Incorporation in Chemical-Solution-Synthesized Inorganic Lead Perovskite Thin Films.

Project description:Perovskite thin films are at the forefront of highly promising photovoltaic technologies due to their remarkable optoelectronic properties. Herein, we explore a low-cost, reproducible, and industry-scalable methodology to synthesize an all-inorganic CsPbI1.5Br1.5 perovskite thin film with additional incorporation of copper and chloride ions into the lattice structure. The synthesis process involves chemical bath deposition of PbS, followed by a gas-solid iodination reaction to yield PbI2. Subsequently, dip-coating incorporates Cs+, Cu2+, Br-, and Cl- ions into PbI2, and annealing at 270 °C produces perovskite thin films. The results show a large coverage area and a uniform thickness of each perovskite thin film. Comprehensive characterization, including X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and photoluminescence, provides the structural, chemical, and optical properties of the synthesized thin films. To evaluate the practical implications of our methodology, we fabricated photodetectors employing CsPbI1.5Br1.5 and (Cs0.95:Cu0.01)PbI1.5Br1.3Cl0.1 perovskite films. A comparative analysis unequivocally demonstrates a significant increase in photodetector performance when utilizing (Cs0.95:Cu0.01)PbI1.5Br1.3Cl0.1 perovskite films. While our findings quantitatively assess the tangible enhancement in photocurrent, we acknowledge the potential for improvement in device fabrication to enhance the overall performance. This study not only affirms the successful low-cost synthesis of perovskite thin films but also emphasizes the pivotal role of Cu2+ and Cl- ions in enhancing the performance of perovskite-based optoelectronic devices.

| S-EPMC10993397 | biostudies-literature

Chemical Vapor Deposited Mixed Metal Halide Perovskite Thin Films.

Project description:In this article, we used a two-step chemical vapor deposition (CVD) method to synthesize methylammonium lead-tin triiodide perovskite films, MAPb1-xSnxI3, with x varying from 0 to 1. We successfully controlled the concentration of Sn in the perovskite films and used Rutherford backscattering spectroscopy (RBS) to quantify the composition of the precursor films for conversion into perovskite films. According to the RBS results, increasing the SnCl2 source amount in the reaction chamber translate into an increase in Sn concentration in the films. The crystal structure and the optical properties of perovskite films were examined by X-ray diffraction (XRD) and UV-Vis spectrometry. All the perovskite films depicted similar XRD patterns corresponding to a tetragonal structure with I4cm space group despite the precursor films having different crystal structures. The increasing concentration of Sn in the perovskite films linearly decreased the unit volume from about 988.4 Å3 for MAPbI3 to about 983.3 Å3 for MAPb0.39Sn0.61I3, which consequently influenced the optical properties of the films manifested by the decrease in energy bandgap (Eg) and an increase in the disorder in the band gap. The SEM micrographs depicted improvements in the grain size (0.3-1 µm) and surface coverage of the perovskite films compared with the precursor films.

| S-EPMC8269519 | biostudies-literature

Emission Enhancement and Intermittency in Polycrystalline Organolead Halide Perovskite Films.

Project description:Inorganic-organic halide organometal perovskites have demonstrated very promising performance for opto-electronic applications, such as solar cells, light-emitting diodes, lasers, single-photon sources, etc. However, the little knowledge on the underlying photophysics, especially on a microscopic scale, hampers the further improvement of devices based on this material. In this communication, correlated conventional photoluminescence (PL) characterization and wide-field PL imaging as a function of time are employed to investigate the spatially- and temporally-resolved PL in CH₃NH₃PbI3-xClx perovskite films. Along with a continuous increase of the PL intensity during light soaking, we also observe PL blinking or PL intermittency behavior in individual grains of these films. Combined with significant suppression of PL blinking in perovskite films coated with a phenyl-C61-butyric acid methyl ester (PCBM) layer, it suggests that this PL intermittency is attributed to Auger recombination induced by photoionized defects/traps or mobile ions within grains. These defects/traps are detrimental for light conversion and can be effectively passivated by the PCBM layer. This finding paves the way to provide a guideline on the further improvement of perovskite opto-electronic devices.

| S-EPMC6274434 | biostudies-literature

Charge Carriers Are Not Affected by the Relatively Slow-Rotating Methylammonium Cations in Lead Halide Perovskite Thin Films.

Project description:Recently, several studies have investigated dielectric properties as a possible origin of the exceptional optoelectronic properties of metal halide perovskites (MHPs). In this study we investigated the temperature-dependent dielectric behavior of different MHP films at different frequencies. In the gigahertz regime, dielectric losses in methylammonium-based samples are dominated by the rotational dynamics of the organic cation. Upon increasing the temperature from 160 to 300 K, the rotational relaxation time, τ, decreases from 400 (200) to 6 (1) ps for MAPb-I3 (-Br3). By contrast, we found negligible temperature-dependent variations in τ for a mixed cation/mixed halide FA0.85MA0.15Pb(I0.85Br0.15)3. From temperature-dependent time-resolved microwave conductance measurements we conclude that the dipolar reorientation of the MA cation does not affect charge carrier mobility and lifetime in MHPs. Therefore, charge carriers do not feel the relatively slow-moving MA cations, despite their great impact on the dielectric constants.

| S-EPMC6734799 | biostudies-literature

High External Photoluminescence Quantum Yield in Tin Halide Perovskite Thin Films.

Project description:We show that pristine thin films made of tin halide perovskite have external photoluminescence quantum yield comparable to that of lead halide perovskite, i.e., the material in use to prepare state-of-the-art perovskite solar cells.

| S-EPMC7887870 | biostudies-literature

Contactless quasi-steady-state photoconductance (QSSPC) characterization of metal halide perovskite thin films.

Project description:We apply the contactless quasi-steady-state photoconductance (QSSPC) method to co-evaporated methyl ammonium lead iodide (MAPbI3) perovskite thin-films. Using an adapted calibration for ultralow photoconductances, we extract the injection-dependent carrier lifetime of the MAPbI3 layer. The lifetime is found to be limited by radiative recombination at the high injection densities applied during the QSSPC measurement, enabling the extraction of the electron and hole mobility sum in the MAPbI3 using the known coefficient of radiative recombination of MAPbI3. Combining the QSSPC measurement with transient photoluminescence measurements, performed at much lower injection densities, we obtain the injection-dependent lifetime curve over several orders of magnitude. From the resulting lifetime curve, we determine the achievable open-circuit voltage of the examined MAPbI3 layer.

| S-EPMC10333188 | biostudies-literature

Absorption Enhancement in Organic-Inorganic Halide Perovskite Films with Embedded Plasmonic Gold Nanoparticles.

Project description:We report on the numerical analysis of solar absorption enhancement in organic-inorganic halide perovskite films embedding plasmonic gold nanoparticles. The effect of particle size and concentration is analyzed in realistic systems in which random particle location within the perovskite film and the eventual formation of dimers are also taken into account. We find a maximum integrated solar absorption enhancement of ∼10% in perovskite films of 200 nm thickness and ∼6% in 300 nm films, with spheres of radii 60 and 90 nm, respectively, in volume concentrations of around 10% in both cases. We show that the presence of dimers boosts the absorption enhancement up to ∼12% in the thinnest films considered. Absorption reinforcement arises from a double contribution of plasmonic near-field and scattering effects, whose respective weight can be discriminated and evaluated from the simulations.

| S-EPMC4603614 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data