Browse
Submit Data
Databases
API
Help

Dataset Information

7 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The Mechanics of Forming Ideal Polymer-Solvent Combinations for Open-Loop Chemical Recycling of Solvents and Plastics.

ABSTRACT: The inherent value and use of hydrocarbons from waste plastics and solvents can be extended through open-loop chemical recycling, as this process converts plastic to a range of non-plastic materials. This process is enhanced by first creating plastic-solvent combinations from multiple sources, which then are streamlined through a single process stream. We report on the relevant mechanics for streamlining industrially relevant polymers such as polystyrene (PS), polypropylene (PP), high-density polyethylene (HDPE), and acrylonitrile butadiene styrene (ABS) into chemical slurries mixed with various organic solvents such as toluene, xylene, and cyclohexane. The miscibility of the polymer feedstock within the solvent was evaluated using the Relative Energy Difference method, and the dissolution process was evaluated using the "Molecular theories in a continuum framework" model. These models were used to design a batch process yielding 1 tonne/h slurry by setting appropriate assumptions including constant viscosity of solvents, disentanglement-controlled dissolution mechanism, and linear increase in the dissolved polymer's mass fraction over time. Solvent selection was found to be the most critical parameter for the dissolution process. The characteristics of the ideal solvent are high affinity to the desired polymer and low viscosity. This work serves as a universal technical guideline for the open-loop chemical recycling of plastics, avoiding the growth of waste plastic by utilising them as a carbon feedstock towards a circular economy framework.

SUBMITTER: Tsampanakis I

PROVIDER: S-EPMC8747207 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Toward More Universal Prediction of Polymer Solution Viscosity for Solvent-Based Recycling.

Project description:The viscosity of polymer solutions is important for both polymer synthesis and recycling. Polymerization reactions can become hampered by diffusional limitations once a viscosity threshold is reached, and viscous solutions complicate the cleaning steps during the dissolution-precipitation technique. Available experimental data is limited, which is more severe for green solvents, justifying dedicated viscosity data recording and interpretation. In this work, a systematic study is therefore performed on the viscosity of polystyrene solutions, considering different concentrations, temperatures, and conventional and green solvents. The results show that for the shear rate range of 1-1000 s-1, the solutions with concentrations between 5 and 39 wt % display mainly Newtonian behavior, which is further confirmed by the applicability of the segment-based Eyring-NRTL and Eyring-mNRF models. Moreover, multivariate data analysis successfully predicts the viscosity of polystyrene solutions under different conditions. This approach will facilitate future data recording for other polymer-solvent combinations while minimizing experimental effort.

| S-EPMC9354514 | biostudies-literature

Recycling of Wastes Plastics and Tires from Automotive Industry.

Project description:Waste tires (granulate) and selected plastics from the automotive industry were evaluated by using the tertiary (pyrolysis) and quaternary (calorimetry) recovering. Pyrolysis is proving to be an environmentally friendly alternative to incineration and inefficient landfilling. Currently, the main challenges for pyrolysis of plastic waste are unavailability and inconsistent quality of feedstock, inefficient and hence costly sorting, and last but not least insufficient regulations around plastic waste management. Waste plastics and tire materials were characterized by TG/DTG analysis, Py-GC/MS analysis and calorimetry. TG analysis of the investigated materials gives the typical decomposition curves of synthetic polymers. The tested samples had the highest rate of weight loss process in the temperature range from 375 °C to 480 °C. Analytical pyrolysis of the tested polymers provided information on a wide variety of organic compounds that were released upon thermal loading of these materials without access to oxygen. Analytical pyrolysis offers valuable information on the spectrum of degradation products and their potential uses. Based on the results of calorimetry, it can be stated that the determined calorific value of selected plastic and rubber materials was ranging from 26.261 to 45.245 MJ/kg depending on the ash content and its composition.

| S-EPMC8271936 | biostudies-literature

Degradation of Styrenic Plastics during Recycling: Accommodation of PP within ABS after WEEE Plastics Imperfect Sorting.

Project description:With the development of dark polymers for industrial sorting technologies, economically profitable recycling of plastics from Waste Electrical and Electronical Equipment (WEEE) can be envisaged even in the presence of residual impurities. In ABS extracted from WEEE, PP is expected to be the more detrimental because of its important lack of compatibility. Hence, PP was incorporated to ABS at different rates (2 to 8 wt%) with a twin-screw extruder. PP was shown to exhibit a nodular morphology with an average diameter around 1-2 µm. Tensile properties were importantly diminished beyond 4 wt% but impact resistance was decreased even at 2 wt%. Both properties were strongly reduced as function of the contamination rate. Various potential compatibilizers for the ABS + 4 wt% PP system were evaluated: PPH-g-MA, PPC-g-MA, ABS-g-MA, TPE-g-MA, SEBS and PP-g-SAN. SEBS was found the most promising, leading to diminution of nodule sizes and also acting as an impact modifier. Finally, a Design Of Experiments using the Response Surface Methodology (DOE-RSM) was applied to visualize the impacts and interactions of extrusion temperature and screw speed on impact resistance of compatibilized and uncompatibilized ABS + 4 wt% PP systems. Resilience improvements were obtained for the uncompatibilized system and interactions between extrusion parameters and compatibilizers were noticed.

| S-EPMC8124459 | biostudies-literature

Toward Microbial Recycling and Upcycling of Plastics: Prospects and Challenges.

Project description:Annually, 400 Mt of plastics are produced of which roughly 40% is discarded within a year. Current plastic waste management approaches focus on applying physical, thermal, and chemical treatments of plastic polymers. However, these methods have severe limitations leading to the loss of valuable materials and resources. Another major drawback is the rapid accumulation of plastics into the environment causing one of the biggest environmental threats of the twenty-first century. Therefore, to complement current plastic management approaches novel routes toward plastic degradation and upcycling need to be developed. Enzymatic degradation and conversion of plastics present a promising approach toward sustainable recycling of plastics and plastics building blocks. However, the quest for novel enzymes that efficiently operate in cost-effective, large-scale plastics degradation poses many challenges. To date, a wide range of experimental set-ups has been reported, in many cases lacking a detailed investigation of microbial species exhibiting plastics degrading properties as well as of their corresponding plastics degrading enzymes. The apparent lack of consistent approaches compromises the necessary discovery of a wide range of novel enzymes. In this review, we discuss prospects and possibilities for efficient enzymatic degradation, recycling, and upcycling of plastics, in correlation with their wide diversity and broad utilization. Current methods for the identification and optimization of plastics degrading enzymes are compared and discussed. We present a framework for a standardized workflow, allowing transparent discovery and optimization of novel enzymes for efficient and sustainable plastics degradation in the future.

| S-EPMC8985596 | biostudies-literature

Chemical Recycling of Plastics by Microwave-Assisted High-Temperature Pyrolysis.

Project description:Use of plastics faces much criticism because of its shocking and increasing impact on the environment. But banning plastic will not help the environment. Only appropriate recycling of plastic waste can give satisfying solution. A lab-scale chemical recycling method, in which a mixture of plastic wastes and plant oil is continuously cracked into ethylene, propylene, and other useful chemicals by using microwave-assisted high-temperature pyrolysis, is developed. The method has delivered interesting leads that provide the basis for setting up a new process. Based on the encouraging results, a "drop-in" method for a renewable and circular polymer industry is also proposed. If it is commercially realized, plastic waste and plant oils will be the feedstock for the polymer industry and this industry will become renewable and circular.

| S-EPMC7117841 | biostudies-literature

Challenges and Alternatives to Plastics Recycling in the Automotive Sector.

Project description:Plastics are increasingly a preferred material choice in designing and developing complex, consumer products, such as automobiles, because they are mouldable, lightweight, and are often perceived to be highly recyclable materials. However, actually recycling the heterogeneous plastics used in such durable items is challenging, and presents very different scenarios to how simple products, such as water bottles, are recovered via curbside or container recycling initiatives. While the technology exists to recycle plastics, their feasibility to do so from high level consumer or industrial applications is bounded by technological and economical restraints. Obstacles include the lack of market for recyclates, and the lack of cost efficient recovery infrastructures or processes. Furthermore, there is a knowledge gap between manufacturers, consumers, and end-of-life facility operators. For these reasons, end-of-life plastics are more likely to end up down-cycled, or as shredder residue and then landfilled. This paper reviews these challenges and several alternatives to recycling plastics in order to broaden the mindset surrounding plastics recycling to improve their sustainability. The paper focuses on the automotive sector for examples, but discussion can be applied to a wide range of plastic components from similarly complex products.

| S-EPMC5456202 | biostudies-other

Closed-loop recyclable plastics from poly(ethyl cyanoacrylate)

Project description:Ethyl cyanoacrylate is a highly reactive monomer that has been used nearly exclusively to make Super Glue and related fast-setting adhesives. Here, we describe transformation of this highly abundant, readily available monomer into a closed-loop recyclable plastic that could supplant currently used (and often unrecycled/unrecyclable) plastics, such as poly(styrene). We report polymerization conditions, plastic-processing methods, and plastic-recycling protocols for poly(ethyl cyanoacrylate) plastics that make the Super Glue monomer a viable starting material for a next generation of closed-loop recyclable plastics. The processes described are scalable, and the plastics can be recycled in a closed-loop process with >90% yields, even when combined with a heterogeneous mixture of other types of plastic. Description Super Glue has been converted into a highly recyclable plastic with properties that are reminiscent of poly(styrene).

| S-EPMC10032590 | biostudies-literature

Ecotoxicity of Plastics from Informal Waste Electric and Electronic Treatment and Recycling.

Project description:Plastic materials account for about 20% of waste electrical and electronic equipment (WEEE). The recycling of this plastic fraction is a complex issue, heavily conditioned by the content of harmful additives, such as brominated flame retardants. Thus, the management and reprocessing of WEEE plastics pose environmental and human health concerns, mainly in developing countries, where informal recycling and disposal are practiced. The objective of this study was twofold. Firstly, it aimed to investigate some of the available options described in the literature for the re-use of WEEE plastic scraps in construction materials, a promising recycling route in the developing countries. Moreover, it presents an evaluation of the impact of these available end-of-life scenarios on the environment by means of the life cycle assessment (LCA) approach. In order to consider worker health and human and ecological risks, the LCA analysis focuses on ecotoxicity more than on climate change. The LCA evaluation confirmed that the plastic re-use in the construction sector has a lower toxicity impact on the environment and human health than common landfilling and incineration practices. It also shows that the unregulated handling and dismantling activities, as well as the re-use practices, contribute significantly to the impact of WEEE plastic treatments.

| S-EPMC7712128 | biostudies-literature

Achieving ideal transistor characteristics in conjugated polymer semiconductors.

Project description:Organic thin-film transistors (OTFTs) with ideal behavior are highly desired, because nonideal devices may overestimate the intrinsic property and yield inferior performance in applications. In reality, most polymer OTFTs reported in the literature do not exhibit ideal characteristics. Supported by a structure-property relationship study of several low-disorder conjugated polymers, here, we present an empirical selection rule for polymer candidates for textbook-like OTFTs with high reliability factors (100% for ideal transistors). The successful candidates should have low energetic disorder along their backbones and form thin films with spatially uniform energetic landscapes. We demonstrate that these requirements are satisfied in the semicrystalline polymer PffBT4T-2DT, which exhibits a reliability factor (~100%) that is exceptionally high for polymer devices, rendering it an ideal candidate for OTFT applications. Our findings broaden the selection of polymer semiconductors with textbook-like OTFT characteristics and would shed light upon the molecular design criteria for next-generation polymer semiconductors.

| S-EPMC10413658 | biostudies-literature

Identifying polymer-forming SAM domains.

Project description:Sterile alpha motif (SAM) domains are common protein modules in eukaryotic cells. It has not been possible to assign functions to uncharacterized SAM domains because they have been found to participate in diverse functions ranging from protein-protein interactions to RNA binding. Here we computationally identify likely members of the subclass of SAM domains that form polymers. Sequences were virtually threaded onto known polymer structures and then evaluated for compatibility with the polymer. We find that known SAM polymers score better than the vast majority of known nonpolymers: 100% (7 of 7) of known polymers and only 8% of known nonpolymers (1 of 12) score above a defined threshold value. Of 2901 SAM family members, we find 694 that score above the threshold and are likely polymers, including SAM domains from the proteins Lethal Malignant Brain Tumor, Bicaudal-C, Liprin-beta, Adenylate Cyclase, and Atherin.

| S-EPMC2605191 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data