ABSTRACT: Here, we propose a low-cost, sustainable, and viable adsorbent (pine tree-derived biochar) to remove acid dyes such as acid violet 17 (AV), which is used in the silk dyeing industry. As a case study, the AV removal process was demonstrated using synthetic effluent and further as a proof of concept using real dye effluent produced from the Sirumugai textile unit in India. The pine tree-derived biochar was selected for removal of aqueous AV dye in batch and fixed-bed column studies. The adsorbent material was characterized for crystallinity (XRD), surface area (BET), surface morphology and elemental compositions (SEM-EDX), thermal stability (TGA), weight loss (DGA), and functional groups (FTIR). Batch sorption studies were performed to evaluate (i) adsorption at various pH values (at pH 2 to 7), (ii) isotherms (at 10, 25, and 35 °C) to assess the temperature effect on the sorption efficiency, and (iii) kinetics to reveal the effect of time, adsorbent dose, and initial concentration on the reaction rate. After systematic evaluation, 2 g/L biochar, 25 mg/L AV, pH 3, 40 °C, and 40 and 360 min in a completely mixed batch study resulted in 50 and 90% dye removal, respectively. The isoelectric point at pH 3.7 ± 0.2 results in maximum dye removal, therefore suggesting that monitoring the ratio of different effluent (acid/wash/dye) can improve the colorant removal efficiency. The Langmuir isotherm best fits with the sorption of AV to biochar, provided a maximal dye uptake of 29 mg/g at 40 °C, showing that adsorption was endothermic. Fixed-bed studies were conducted at room temperature with an initial dye concentration of 25 and 50 mg/L. The glass columns were packed with biochar (bed depth 20 cm, pore volume = 14 mL) at an initial pH of 5.0 and a 10 mL/min flow rate for 120 min. Finally, the regeneration of the adsorbent was achieved using desorption studies conducted under the proposed experimental conditions resulted in 90-93% removal of AV even after five cycles of regeneration.
