The Effect of Silane Coupling Agent on the Texture and Properties of In Situ Synthesized PI/SiO2 Nanocomposite Film.
Ontology highlight
ABSTRACT:
SUBMITTER: Huang J
PROVIDER: S-EPMC8778991 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Bio-based polyurethane (PU)-coated controlled release fertilizers are attracting a lot of attention; however, generally they have poor properties, so it is difficult for them to meet the agricultural needs. Herein, γ-aminopropyl triethoxy silane (KH550) was first used with nanosilica (NS) to prepare bio-based PU nanocomposite-coated urea (KSPCU). The coating microstructures and nutrient controlled release behaviors of KSPCU were investigated and compared with those of unmodified NS containing PU nanocomposite-coated urea (SPCU) and bio-based PU-coated urea (PCU). The KSPCU with KH550 exhibited an excellent controlled release performance. Its nutrient release longevity exceeded 105 d, which was nearly 6 times greater than that of PCU and 2 times more than that of SPCU, and it was much longer than that of PCU reported in previous research at a coating rate of 3 wt %. A series of characterization methods combined with water resistance capacity and porosity measurements confirmed that a hydrogen bond was formed by the reaction between the nanoparticle and PM200, the nanoparticle was bonded on the macromolecular chain, and KH550 in the coating increased the cross-linking degree, which were beneficial to slowing down the nutrient release of the KSPCU. The innovative application of KH550 on bio-based PU-coated fertilizers will provide a new coating technology for improving their controlled release property.
| S-EPMC8655934 | biostudies-literature
Project description:Simultaneous improvement in the mechanical properties and lifetime of polymer nanocomposites is crucially significant to further extend the versatility of polymer materials and reduce environmental impact. In this study, we fabricated reinforced polypropylene (PP)-based nanocomposites with improved aging stability by the addition of surface-modified well-ordered silica nanospheres with a silane coupling agent (SCA) containing hindered phenol antioxidant as a filler. Uniform grafting of the SCA on the filler surface contributed to homogeneous dispersion of the filler into the matrix, leading to improved properties (e.g., stiffness and ductility) and uniform distribution of the antioxidant component into the entire nanocomposite by filler dispersion. The grafting of SCA also likely provides an inhibitory effect on antioxidant migration, which leads to loss of polymer stability during the aging process. This novel idea for the material design of PP-based nanocomposites, which simultaneously enhances their mechanical properties and lifetime, is promising for application in the fabrication of various types of polymer nanocomposites.
| S-EPMC7271349 | biostudies-literature
Project description:To date, Ag-based nanomaterials have demonstrated a high potential to overcome antibiotic resistance issues. However, bare Ag nanomaterials are prone to agglomeration in the biological environment, which results in a loss of antibacterial activity over time. Furthermore, it is still challenging to collect small-sized Ag nanomaterials right after the synthesis process. In this study, spherical-shaped Ag nanoparticles (NPs) (~6-10 nm) were attached on the surface of cetyltrimethylammonium bromide (CTAB)-loaded mesoporous silica nanoparticles (MSNs) (~100-110 nm). Antibacterial activity tests suggested that the obtained nanocomposite can be used as a highly efficient antibacterial agent against both Gram-negative and Gram-positive bacterial strains. The minimum inhibitory concentration (MIC) recalculated to pure Ag weight in nanocomposite was found to be ~1.84 µg/mL (for Escherichia coli) and ~0.92 µg/mL (for Staphylococcus aureus)-significantly smaller compared to values reported to date. The improved antibacterial activity of the prepared nanocomposite can be attributed to the even distribution of non-aggregated Ag NPs per volume unit and the presence of CTAB in the nanocomposite pores.
| S-EPMC7917824 | biostudies-literature
Project description:Nucleation-and-growth processes are used extensively in the synthesis of spherical colloids, and more recently regiospecific nucleation-and-growth processes have been exploited to prepare more complex colloids such as patchy particles. We demonstrate that surface geometry alone can be made to play the dominant role in determining the final particle geometry in such syntheses, meaning that intricate chemical surface patternings are not required. We present a synthesis method for "lollipop"-shaped colloidal heterodimers (patchy particles), combining a recently published nucleation-and-growth technique with our recent findings that particle geometry influences the locus of droplet adsorption onto anisotropic template particles. Specifically, 3-methacryloxypropyl trimethoxysilane (MPTMS) is nucleated and grown onto bullet-shaped and nail-shaped colloids. The shape of the template particle can be chosen such that the MPTMS adsorbs regiospecifically onto the flat ends. In particular, we find that particles with a wider base increase the range of droplet volumes for which the minimum in the free energy of adsorption is located at the flat end of the particle compared with bullet-shaped particles of the same aspect ratio. We put forward an extensive analysis of the synthesis mechanism and experimentally determine the physical properties of the heterodimers, supported by theoretical simulations. Here we numerically optimize, for the first time, the shape of finite-sized droplets as a function of their position on the rod-like silica particle surface. We expect that our findings will give an impulse to complex particle creation by regiospecific nucleation and growth.
| S-EPMC5645761 | biostudies-literature
Project description:Epoxy nanocomposites have demonstrated promising properties for high-voltage insulation applications. An in situ approach to the synthesis of epoxy-SiO2 nanocomposites was employed, where surface-functionalized SiO2 (up to 5 wt.%) is synthesized directly in the epoxy. The dispersion of SiO2 was found to be affected by both the pH and the coupling agent used in the synthesis. Hierarchical clusters of SiO2 (10-60 nm) formed with free-space lengths of 53-105 nm (increasing with pH or SiO2 content), exhibiting both mass and surface-fractal structures. Reducing the amount of coupling agent resulted in an increase in the cluster size (~110 nm) and the free-space length (205 nm). At room temperature, nanocomposites prepared at pH 7 exhibited up to a 4% increase in the real relative permittivity with increasing SiO2 content, whereas those prepared at pH 11 showed up to a 5% decrease with increasing SiO2 content. Above the glass transition, all the materials exhibited low-frequency dispersion effect resulting in electrode polarization, which was amplified in the nanocomposites. Improvements in the dielectric properties were found to be not only dependent on the state of dispersion, but also the structure and morphology of the inorganic nanoparticles.
| S-EPMC8124689 | biostudies-literature
Project description:π-Conjugated molecule-bridged silicon quantum dot (Si QD) clusters were first synthesized by Sonogashira cross-coupling reaction between 4-ethynylstyryl and octyl co-capped Si QDs (4-Es/Oct Si QDs) and 2,5-dibromo-3-hexylthiophene. The formation of Si QD clusters was confirmed by field emission transmission electron microscopy. The electronic coupling between the QDs in the Si QD cluster is significantly enhanced as compared with that for 4-Es/Oct Si QDs, which is verified from the red shift in ultraviolet-visible absorption and photoluminescence spectra of the Si QD cluster with the possibility of exciton transport, the increased charging effect found in the core-level photoemission spectra, the shift to lower binding energy of the valence band photoemission spectrum, and more decisively, the increase in electrical conductance of the Si QD cluster thin film. To investigate the physical origin of the temperature dependence of the electrical conductance, we have merged the microscopic viewpoint, Marcus theory, on the electron transfer (W) between the adjacent QDs, with macroscopic concepts, such as the conductance (G), mobility (μ), and diffusion coefficient (D). The effective reorganizational energies of charge transfer between the neighboring Si QDs in 4-Es/Oct Si QD and Si QD cluster thin films are estimated to be 170 and 140 meV, respectively, while the ratio of the effective electronic coupling of the latter to that of the former is determined to be 7.3:1.
| S-EPMC6648244 | biostudies-literature
Project description:Adhesive bonding is widely used in the joining of metals and carbon fiber-reinforced plastics (CFRPs). Ultrasonic vibration was used to improve adhesive bonding of CFRP/Al alloy joints grafted with silane coupling agent, and the effect of the ultrasound on the bonding was studied. The surface of Al alloy was treated with a silane coupling agent, and then the ultrasonic vibration was applied on the adherend during the adhesive bonding process. The shear strength was tested, and the mechanism was analyzed by scanning electron microscope (SEM) and Fourier transform infrared spectrometer (FTIR). It is found that the ultrasonic assisting can further promote the bonding of the Al alloy and the adhesive. For the test joins, the shear strength was increased by 267.50% using the silanization treatment plus the ultrasonic assisting. The ultrasonic assisting promoted the grafted epoxy group to react with the adhesive more sufficiently at the Al/adhesive interface by causing micro-mixing and intensified molecule collision, and thus more chemical bond was formed. Under the ultrasonic action, the interface and the adhesive layer became tighter owing to the impact contact at the interface and the oscillating flow in the adhesive layer. The ultrasonic vibration assisting increased the bonding strength by promoting the chemical bond and improving physical morphology.
| S-EPMC7240749 | biostudies-literature
Project description:The current longevity of dental resins intraorally is limited by susceptibility to acidic attacks from bacterial metabolic byproducts and vulnerability to enzymatic or hydrolytic degradation. Here, we demonstrate synthesizing an ionic liquid-based antibiofilm silane effective against Streptococcus mutans, a major caries pathogen. Furthermore, we incorporate this silane into dental resins, creating antibiofilm- and degradation-resistant materials applicable across resin types. FTIR, UV-vis, and NMR spectroscopy confirmed the synthesis of the expected ionic liquid-based silane. The characterization of SiO2 after the silanization indicated the presence of the silane and how it interacted with the oxide. All groups achieved a degree of conversion similar to that found for commercial resin composites immediately and after two months of storage in water. The minimum of 2.5 wt % of silane led to lower softening in solvent than the control group (GCTRL) (p < 0.05). While the flexural strength indicated a lower value from 1 wt % of silane compared to GCTRL (p < 0.05), the ultimate tensile strength did not indicate differences among groups (p > 0.05). There was no difference within groups between the immediate and long-term tests of flexural strength (p > 0.05) or ultimate tensile strength (p > 0.05). The addition of at least 5 wt % of silane reduced the viability of S. mutans compared to GCTRL (p < 0.05). The fluorescence microscopy analysis suggested that the higher the silane concentration, the higher the amount of bacteria with membrane defects. There was no difference among groups in the cytotoxicity test (p > 0.05). Therefore, the developed dental resins displayed biocompatibility, proper degree of conversion, improved resistance against softening in solvent, and stability after 6 months of storage in water. This material could be further developed to produce polymeric antimicrobial layers for different surfaces, supporting various potential avenues in developing novel biomaterials with enhanced therapeutic characteristics using ionic liquid-based materials.
| S-EPMC11231966 | biostudies-literature
Project description:The development of ice-phobic, glass-substrate surfaces is important for many reasons such as poor visibility through the ice-covered windshields of vehicles. The present authors have developed new glass surfaces coated with a silane coupling agent and polypeptides whose amino-acid sequence is identical to a partial sequence of winter flounder antifreeze protein. We have conducted experiments on the freezing of sessile water droplets on the glass surfaces, and measured the droplet temperature, contact angle, contact area and surface roughness. The results show that the supercooling temperature decreased noticeably in the case where a higher concentration solution of polypeptide was used for the coating. The adhesion strength of frozen droplets was lowest in the same case. In addition, we observed many nanoscale humps on the coated surface, which were formed by polypeptide aggregates in the solution. We argue that the combination of the hydrophilic humps and the hydrophobic base surfaces causes water molecules adjacent to the surfaces to have a variety of orientations in that plane, even after the ice layer started to grow. This then induces a misfit of water-molecule spacing in the ice layers and consequent formation of fragile polycrystalline structure. This explains the lower values of ice adhesion strength and supercooling enhancement in the cases of the polypeptide-coated glass plates.
| S-EPMC6173376 | biostudies-literature
Project description:This paper presents a study of lead zirconate titanate (PZT) films hydrothermally grown on a dome-shaped titanium diaphragm. Few articles in the literature address the implementation of hydrothermal PZT films on curved-diaphragm substrates for resonators. In this study, a 50-?m-thick titanium sheet is embossed using balls of designed dimensions to shape a dome-shaped cavity array. Through single-process hydrothermal synthesis, PZT films are grown on both sides of the processed titanium diaphragm with good adhesion and uniformity. The hydrothermal synthesis process involves a high concentration of potassium hydroxide solution and excess amounts of lead acetate and zirconium oxychloride octahydrate. Varied deposition times and temperatures of PZT films are investigated. The grown films are characterized by X-ray diffraction and scanning electron microscopy. The 10-?m-thick PZT dome-shaped resonators with 60- and 20-?m-thick supporting layers are implemented and further tested. Results for both resonators indicate that large electromechanical coupling coefficients and a series resonance of 95?MHz from 14?MHz can be attained. The device is connected to a complementary metal-oxide-semiconductor integrated circuit for analysis of oscillator applications. The oscillator reaches a Q value of 6300 in air. The resonator exhibits a better sensing stability when loaded with water when compared with air.
| S-EPMC5750027 | biostudies-literature