A critical review on advances in the practices and perspectives for the treatment of dye industry wastewater.
Ontology highlight
ABSTRACT:
SUBMITTER: Shindhal T
PROVIDER: S-EPMC8806354 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:A new sorbent material, barium sulfate-Direct Blending Yellow D-3RNL hybrid (BSD), was synthesized and characterized by various methods. Both the anionic dyes, Reactive Brilliant Red X-3B and Weak Acid Green GS were hardly adsorbed by the BSD material, while the sorption of Ethyl Violet (EV) and Victoria Blue B were extremely obvious. The sorption of cationic dyes obeyed the Langmuir isotherm model, which depended on the electric charge attraction. The saturation amount of EV adsorbed onto the BSD material approached to 39.36 mg/g. The sorption of EV changed little with pH from 3 to 12 while it increased with increasing levels of electrolyte. A dye wastewater sampled from Jinjiang Chemicals was treated, and the color removal rate was more than the COD removal rate. In addition, the cationic dye-BSD sludge was utilized as a colorant fill-in coating. The light stability and thermal stability of the colorant was measured and exhibited good features. This work provided a simple and eco-friendly method for dye wastewater treatment with recycling of waste.
| S-EPMC6268578 | biostudies-literature
Project description:The study investigates critical shifts impacting the international tourism space in contemporary times. Furthermore, the current study examines tourism policies and product development challenges faced by tourist regions as a consequence of market dynamics. Drawing upon a sample of thirty tourism experts in southern Africa, the critical shifts were identified and key among them include BRICS, terrorism, ageing population, and trophy hunting, are increasingly framing a new narrative for the future growth trajectory of the international tourism industry’s value chain in the context of Africa. A conclusion is reached that to attain long term sustainable development of the sunrise multi-trillion dollar industry, it is critical that tourism operators re-set and deploy sharpened strategies which are in synch with the realities obtaining in the broader operating environment. Policy recommendations and managerial implications are proffered.
| S-EPMC7538044 | biostudies-literature
Project description:Producers and veterinarians are considered responsible for improving animal welfare, as they are responsible for implementing practices that directly impact the animal's well-being. Most husbandry procedures performed in cattle do not include pain mitigation, and understanding challenges faced by these stakeholders to use analgesics is key in improving on-farm pain management strategies. Therefore, the objectives of this study were to explore producer and veterinarian perspectives on pain management practices by (1) exploring inquires received by Food Animal Residue Avoidance Databank (FARAD) regarding analgesic use in cattle and (2) using a survey instrument to identify factors that impact pain management implementation in the US cattle industry. Albeit analgesia use increased in the past ten years for some producers and the majority of veterinarians, administering analgesics for pain management on US cattle farms remains a challenge. From a producer perspective, drug cost, availability and logistics for administration. From a veterinarian perspective, lack of Food and Drug Administration (FDA) products hinders the support of on-farm protocols requiring extra-label drug use. Future steps to improve analgesic use on-farm include identifying and approving drugs that demonstrate efficacy for managing pain in cattle and disseminating educational resources to support stakeholders in both the implementation and drug withdrawal process.
| S-EPMC7830793 | biostudies-literature
Project description:Background:One-third of depressed patients develop treatment-resistant depression with the related sequelae in terms of poor functionality and worse prognosis. Solid evidence suggests that genetic variants are potentially valid predictors of antidepressant efficacy and could be used to provide personalized treatments. Methods:The present review summarizes genetic findings of treatment-resistant depression including results from candidate gene studies and genome-wide association studies. The limitations of these approaches are discussed, and suggestions to improve the design of future studies are provided. Results:Most studies used the candidate gene approach, and few genes showed replicated associations with treatment-resistant depression and/or evidence obtained through complementary approaches (e.g., gene expression studies). These genes included GRIK4, BDNF, SLC6A4, and KCNK2, but confirmatory evidence in large cohorts was often lacking. Genome-wide association studies did not identify any genome-wide significant association at variant level, but pathways including genes modulating actin cytoskeleton, neural plasticity, and neurogenesis may be associated with treatment-resistant depression, in line with results obtained by genome-wide association studies of antidepressant response. The improvement of aggregated tests (e.g., polygenic risk scores), possibly using variant/gene prioritization criteria, the increase in the covering of genetic variants, and the incorporation of clinical-demographic predictors of treatment-resistant depression are proposed as possible strategies to improve future pharmacogenomic studies. Conclusions:Genetic biomarkers to identify patients with higher risk of treatment-resistant depression or to guide treatment in these patients are not available yet. Methodological improvements of future studies could lead to the identification of genetic biomarkers with clinical validity.
| S-EPMC6368368 | biostudies-literature
Project description:Separating valuable materials such as dyes from wastewater using membranes and returning them to the production line is a desirable environmental and economical procedure. However, sometimes, besides filtration, adsorption, and separation processes, pollutant destruction also can be suitable using photocatalytic membranes. The art of producing nanohybrid materials in contrast with nanocomposites encompasses nanomaterial synthesis as a new product with different properties from raw materials for nanohybrids versus the composition of nanomaterials for nanocomposites. According to the findings of this research, confirming proper synthesis of nanohybrid is one challenge that can be overcome by different analyses, other researchers' reports, and the theoretical assessment of physical or chemical reactions. The application of organic-inorganic nanomaterials and frameworks is another challenge that is discussed in the present work. According to the findings, Nanohybrid Membranes (NHMs) can achieve 100% decolorization, but cannot eliminate salts and dyes, although the removal efficiency is notable for some salts, especially divalent salts. Hydrophilicity, antifouling properties, flux, pressure, costs, usage frequency, and mechanical, chemical, and thermal stabilities of NHMs should be considered.
| S-EPMC10784202 | biostudies-literature
Project description:Purpose of reviewT cell prolymphocytic leukemia (T-PLL) is a rare mature T cell tumor. Available treatment options in this aggressive disease are largely inefficient and patient outcomes are highly dissatisfactory. Current therapeutic strategies mainly employ the CD52-antibody alemtuzumab as the most active single agent. However, sustained remissions after sole alemtuzumab-based induction are exceptions. Responses after available second-line strategies are even less durable. More profound disease control or rare curative outcomes can currently only be expected after a consolidating allogeneic hematopoietic stem cell transplantation (allo-HSCT) in best first response. However, only 30-50% of patients are eligible for this procedure. Major advances in the molecular characterization of T-PLL during recent years have stimulated translational studies on potential vulnerabilities of the T-PLL cell. We summarize here the current state of "classical" treatments and critically appraise novel (pre)clinical strategies.Recent findingsAlemtuzumab-induced first remissions, accomplished in ≈ 90% of patients, last at median ≈ 12 months. Series on allo-HSCT in T-PLL, although of very heterogeneous character, suggest a slight improvement in outcomes among transplanted patients within the past decade. Dual-action nucleosides such as bendamustine or cladribine show moderate clinical activity as single agents in the setting of relapsed or refractory disease. Induction of apoptosis via reactivation of p53 (e.g., by inhibitors of HDAC or MDM2) and targeting of its downstream pathways (i.e., BCL2 family antagonists, CDK inhibitors) are promising new approaches. Novel strategies also focus on inhibition of the JAK/STAT pathway with the first clinical data. Implementations of immune-checkpoint blockades or CAR-T cell therapy are at the stage of pre-clinical assessments of activity and feasibility. The recommended treatment strategy in T-PLL remains a successful induction by infusional alemtuzumab followed by a consolidating allo-HSCT in eligible patients. Nevertheless, long-term survivors after this "standard" comprise only 10-20%. The increasingly revealed molecular make-up of T-PLL and the tremendous expansion of approved targeted compounds in oncology represent a "never-before" opportunity to successfully tackle the voids in T-PLL. Approaches, e.g., those reinstating deficient cell death execution, show encouraging pre-clinical and first-in-human results in T-PLL, and urgently have to be transferred to systematic clinical testing.
| S-EPMC7230055 | biostudies-literature
Project description:Over the past three decades, environmental concerns about the water pollution have been raised on societal and industrial levels. The presence of pollutants stemming from cosmetic products has been documented in wastewater streams outflowing from industrial as well as wastewater treatment plants. To this end, a series of consistent measures should be taken to prevent emerging contaminants of water resources. This need has driven the development of technologies, in an attempt to mitigate their impact on the environment. This work offers a thorough review of existing knowledge on cosmetic wastewater treatment approaches, including, coagulation, dissolved air flotation, adsorption, activated sludge, biodegradation, constructed wetlands, and advanced oxidation processes. Various studies have already documented the appearance of cosmetics in samples retrieved from wastewater treatment plants (WWTPs), which have definitely promoted our comprehension of the path of cosmetics within the treatment cycle; however, there are still multiple blanks to our knowledge. All treatments have, without exception, their own limitations, not only cost-wise, but also in terms of being feasible, effective, practical, reliable, and environmentally friendly.
| S-EPMC9553780 | biostudies-literature
Project description:A large amount of cow hair solid waste is produced in leather production, and a reasonable treatment should be developed to reduce the pollution. In this study, cow hair waste was utilized as the carbon precursor, and N2 was determined to be the most appropriate atmosphere for biochar preparation. We performed a comparison of the properties of biochars that were prepared with different methods, including direct pyrolysis, KOH activation, and the MgO template method. The characterization results show that the highest specific surface area reaches 1753.075 m2/g. Subsequently, the keratin that was extracted from cow hair and purified was used to prepare a biochar with the MgO template method, obtaining an orderly sponge structure. The biochar from cow hair waste was further used to absorb direct blue dye wastewater, and its adsorption capacity reached 1477 mg/g after 10 h with a high efficiency of regeneration. This study successfully utilized keratin-containing hair waste and provides a new source for synthesizing carbon materials for dye wastewater treatment.
| S-EPMC8036782 | biostudies-literature
Project description:Each year about 7.6 million tons of waste glasses are landfilled without recycling, reclaiming or upcycling. Herein we have developed a solvent free upcycling method for recycled glass waste (RG) by remanufacturing it into porous recycled glass microspheres (PRGMs) with a view to explore removal of organic pollutants such as organic dyes. PRGMs were prepared via flame spheroidisation process and characterised using Scanning Electron Microscopy (SEM), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) and Mercury Intrusion Porosimetry (MIP) analysis. PRGMs exhibited 69% porosity with overall pore volume and pore area of 0.84 cm3/g and 8.6 cm2/g, respectively (from MIP) and a surface area of 8 m2/g. Acid red 88 (AR88) and Methylene blue (MB) were explored as a model source of pollutants. Results showed that removal of AR88 and MB by PRGMs was influenced by pH of the dye solution, PRGMs doses, and dye concentrations. From the batch process experiments, adsorption and coagulation processes were observed for AR88 dye whilst MB dye removal was attributed only to adsorption process. The maximum monolayer adsorption capacity (qe) recorded for AR88, and MB were 78 mg/g and 20 mg/g, respectively. XPS and FTIR studies further confirmed that the adsorption process was due to electrostatic interaction and hydrogen bond formation. Furthermore, dye removal capacity of the PRGMs was also investigated for column adsorption process experiments. Based on the Thomas model, the calculated adsorption capacities at flow rates of 2.2 mL/min and 0.5 mL/min were 250 mg/g and 231 mg/g, respectively which were much higher than the batch scale Langmuir monolayer adsorption capacity (qe) values. It is suggested that a synergistic effect of adsorption/coagulation followed by filtration processes was responsible for the higher adsorption capacities observed from the column adsorption studies. This study also demonstrated that PRGMs produced from recycled glass waste could directly be applied to the next cyclic experiment with similar dye removal capability. Thus, highlighting the circular economy scope of using waste inorganic materials for alternate applications such as pre-screening materials in wastewater treatment applications.
| S-EPMC9457513 | biostudies-literature
Project description:This paper reviews current knowledge on sources, spread and removal mechanisms of antibiotic resistance genes (ARGs) in microbial communities of wastewaters, treatment plants and downstream recipients. Antibiotic is the most important tool to cure bacterial infections in humans and animals. The over- and misuse of antibiotics have played a major role in the development, spread, and prevalence of antibiotic resistance (AR) in the microbiomes of humans and animals, and microbial ecosystems worldwide. AR can be transferred and spread amongst bacteria via intra- and interspecies horizontal gene transfer (HGT). Wastewater treatment plants (WWTPs) receive wastewater containing an enormous variety of pollutants, including antibiotics, and chemicals from different sources. They contain large and diverse communities of microorganisms and provide a favorable environment for the spread and reproduction of AR. Existing WWTPs are not designed to remove micropollutants, antibiotic resistant bacteria (ARB) and ARGs, which therefore remain present in the effluent. Studies have shown that raw and treated wastewaters carry a higher amount of ARB in comparison to surface water, and such reports have led to further studies on more advanced treatment processes. This review summarizes what is known about AR removal efficiencies of different wastewater treatment methods, and it shows the variations among different methods. Results vary, but the trend is that conventional activated sludge treatment, with aerobic and/or anaerobic reactors alone or in series, followed by advanced post treatment methods like UV, ozonation, and oxidation removes considerably more ARGs and ARB than activated sludge treatment alone. In addition to AR levels in treated wastewater, it examines AR levels in biosolids, settled by-product from wastewater treatment, and discusses AR removal efficiency of different biosolids treatment procedures. Finally, it puts forward key-points and suggestions for dealing with and preventing further increase of AR in WWTPs and other aquatic environments, together with a discussion on the use of mathematical models to quantify and simulate the spread of ARGs in WWTPs. Mathematical models already play a role in the analysis and development of WWTPs, but they do not consider AR and challenges remain before models can be used to reliably study the dynamics and reduction of AR in such systems.
| S-EPMC8542863 | biostudies-literature