Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Efficient alkaloid capture from water using a charged porous organic polymer.

ABSTRACT: Berberine hydrochloride (BH), an important alkaloid, can be captured from water and released in organic solution circularly by a charged porous polymer (TPB-HCP), which is hypercross-linked using the cost-effective Friedel-Crafts reaction using sodium tetraphenylborate as the monomer. With high BET surface area, hierarchical porous structure and charged characteristics, TPB-HCP displays excellent adsorption capacity for BH owing to the synergistic effects of size matching and electrostatic interaction.

SUBMITTER: Zhang QM

PROVIDER: S-EPMC9086464 | biostudies-literature | 2018 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Efficient alkaloid capture from water using a charged porous organic polymer.

Zhang Qing-Mei QM Wang Zhen Z Cheng Guang G Ma Hui H Zhang Qing-Pu QP Wan Fu-Xian FX Tan Bien B Zhang Chun C

RSC advances 20180927 58

Berberine hydrochloride (BH), an important alkaloid, can be captured from water and released in organic solution circularly by a charged porous polymer (TPB-HCP), which is hypercross-linked using the cost-effective Friedel-Crafts reaction using sodium tetraphenylborate as the monomer. With high BET surface area, hierarchical porous structure and charged characteristics, TPB-HCP displays excellent adsorption capacity for BH owing to the synergistic effects of size matching and electrostatic inter ...[more]

PMID: 35548106

Similar Datasets

Highly Efficient Organic Dyes Capture Using Thiol-Functionalized Porous Organic Polymer.

Project description:It is of great significance to develop new materials for efficient capture cationic dyes methylene blue (MB) and malachite green (MG). In this work, a novel triptycene-based porous organic polymer with abundant thiol groups (TPP-SH) was prepared successfully by postmodification with a high surface area and robust triptycene-based porous organic polymer (TPP). The obtained TPP-SH exhibited a high surface area, good porosity, and good thermal stability. In addition, TPP-SH was highly effective at capturing MB and MG from aqueous solution because of the abundant thiols in its hierarchical structure. Under optimal adsorption conditions, the maximum adsorption capacities of MB and MG calculated by the Langmuir model at room temperature were 1146.3 and 689.6 mg g-1, respectively. These values are higher than those of many reported materials. The MB and MG adsorption rates were 0.0154 and 6.69 × 10-4 mg g-1 min-1, respectively. Furthermore, the polymer TPP-SH had a good recycling performance after adsorption-desorption at least five times. Therefore, the TPP-SH exhibited a high adsorption capacity, fast adsorption kinetics, and easy-recycling behavior, providing a new avenue for the preparation of green functionalized adsorbents with good performance for water decontamination.

| S-EPMC9161400 | biostudies-literature

Fluorescent aminal linked porous organic polymer for reversible iodine capture and sensing.

Project description:A novel triazene-anthracene-based fluorescent aminal linked porous organic polymer (TALPOP) was prepared via metal free-Schiff base polycondensation reaction of 9,10-bis-(4,6-diamino-S-triazin-2-yl)anthracene and 2-furaldehyde. The polymer has exceptional chemical and thermal stabilities and exhibit good porosity with Brunauer-Emmett-Teller surface area of 401 m2g-1. The combination of such porosity along with the highly conjugated heteroatom-rich framework enabled the polymer to exhibit exceptional iodine vapor uptake of up to 314 wt % and reversible iodine adsorption in solution. Because of the inclusion of the anthracene moieties, the TALPOP exhibited excellent detection sensitivity towards iodine via florescence quenching with Ksv value of 2.9 × 103 L mol-1. The cost effective TALPOP along with its high uptake and sensing of iodine, make it an ideal material for environmental remediation.

| S-EPMC7525493 | biostudies-literature

Carbon dioxide capture and efficient fixation in a dynamic porous coordination polymer.

Project description:Direct structural information of confined CO2 in a micropore is important for elucidating its specific binding or activation mechanism. However, weak gas-binding ability and/or poor sample crystallinity after guest exchange hindered the development of efficient materials for CO2 incorporation, activation and conversion. Here, we present a dynamic porous coordination polymer (PCP) material with local flexibility, in which the propeller-like ligands rotate to permit CO2 trapping. This process can be characterized by X-ray structural analysis. Owing to its high affinity towards CO2 and the confinement effect, the PCP exhibits high catalytic activity, rapid transformation dynamics, even high size selectivity to different substrates. Together with an excellent stability with turnover numbers (TON) of up to 39,000 per Zn1.5 cluster of catalyst after 10 cycles for CO2 cycloaddition to form value-added cyclic carbonates, these results demonstrate that such distinctive structure is responsible for visual CO2 capture and size-selective conversion.

| S-EPMC6761133 | biostudies-literature

SO<sub>2</sub> Capture Using Porous Organic Cages.

Project description:We report the first experimental investigation of porous organic cages (POCs) for the demanding challenge of SO2 capture. Three structurally related N-containing cage molecular materials were studied. An imine-functionalized POC (CC3) showed modest and reversible SO2 capture, while a secondary-amine POC (RCC3) exhibited high but irreversible SO2 capture. A tertiary amine POC (6FT-RCC3) demonstrated very high SO2 capture (13.78 mmol g-1 ; 16.4 SO2 molecules per cage) combined with excellent reversibility for at least 50 adsorption-desorption cycles. The adsorption behavior was investigated by FTIR spectroscopy, 13 C CP-MAS NMR experiments, and computational calculations.

| S-EPMC8361948 | biostudies-literature

Highly Flowable Nano TiO2/Porous Organic Polymer (POP) Supports for Efficient Metallocene Catalysts.

Project description:Porous organic polymers (POPs) have proven to be an efficient support in the olefin polymerization catalyst field. In this paper, nano TiO2 beads were used to modulate the pore structure, bulk density, and surface morphology and flowability of the prepared POPs. With the incorporation of the hydrophilic nano TiO2 beads, the prepared TiO2/POP supports obtained reasonable specific surface area (100-300 m2/g) and higher bulk density (0.26-0.35 g/mL) and flowability than the pure POP supports. The results show that bulk density of the prepared TiO2/POP particles increased when adding an increased amount of TiO2, and when 37.5% TiO2 (weight percent to the total comonomers divinylbenzene (DVB) and 2-hydroxyethyl methacrylate (HEMA)) and 3:1 DVB/HEMA (molar ratio) were added, highly flowable TiO2/POP composites (POP-6 and POP-7) were obtained. With the modulation of the nano TiO2 template during the support synthesis, the prepared POP-7 particles successfully achieved a normal distribution with a narrow particle size distribution (PSD) of 0.717 and average particle size of 24.1 m, a specific surface area (SSA) of 279 m2/g, and relatively high bulk density of 0.30 g/mL. Furthermore, all the prepared TiO2/POP supports obtained higher ethylene polymerization activity than silica gel-supported commercial metallocene catalyst. The immobilized (n-BuCp)2ZrCl2/MAO@POP-7 catalyst exhibited the highest ethylene polymerization activity of 4794 kg PE/mol Zr.bar.h and productivity of 389 g PE/g cat, more than twice that of the commercial counterpart. Even higher catalyst productivity (3197 g PE/g cat) and bulk density of the produced PE (0.36 g/mL) could be obtained in higher ethylene partial pressure at 80 ∘C for 2 h, and the prepared TiO2/POP catalyst shows no obvious Zr+ active sites decay during the ethylene polymerization.

| S-EPMC7823374 | biostudies-literature

Superfast Capture of Iodine from Air, Water, and Organic Solvent by Potential Dithiocarbamate-Based Organic Polymer.

Project description:Organic polymers are widely explored due to their high stability, scalability, and more facile modification properties. We developed cost-effective dithiocarbamate-based organic polymers synthesized using diamides, carbon disulfide, and diamines to apply for environmental remediation. The sequestration of radioiodine is a serious concern to tackle when dealing with nuclear power for energy requirements. However, many of the current sorbents have the problem of slower adsorption for removing iodine. In this report, we discuss the utilization of an electron-rich dithiocarbamate-based organic polymer for the removal of iodine in a very short time and with high uptake. Our material showed 2.8 g/g uptake of vapor iodine in 1 h, 915.19 mg/g uptake of iodine from cyclohexane within 5 s, 93% removal of saturated iodine from water in 1 min, and 1250 mg/g uptake of triiodide ions from water within 30 s. To the best of our knowledge, the iodine capture was faster than previously observed for any existing material. The material was fully recyclable when applied for up to four cycles. Hence, this dithiocarbamate-based polymer can be a promising system for the fast removal of various forms of iodine and, thus, enhance environmental security.

| S-EPMC9861013 | biostudies-literature

Hydroxyl porous aromatic frameworks for efficient adsorption of organic micropollutants in water.

Project description:Environmental pollution is an important issue in sustainable human development. People give great importance to environmental protection, especially with regards to increasingly scarce water resources. Water pollution is becoming more and more serious due to the existence of organic micropollutants. As a platform with good stability, porous aromatic frameworks (PAFs) have been widely studied. Because of their high surface area and thermal stability, they are considered to be a good sewage treatment agent. However, the aromatic nature of PAFs makes their skeletons mostly hydrophobic. This characteristic of PAFs seriously affects their diffusion rate in water as an adsorbent, resulting in a low adsorption rate. In this work, we synthesized a series of hydroxyl functionalized porous aromatic frameworks (PAF-80, PAF-81, and PAF-82) via the Sonogashira-Hagihara cross-coupling reaction, which created polar motifs on the hydrophobic surfaces, and carried out adsorption tests on typical organic micropollutants in water such as bisphenol A (BPA), 2-naphthol (2-NO) and p-chloroxylenol (PCMX). Among the three PAFs, PAF-82 exhibited the highest BET surface area, polar active sites, and a high degree of conjugation, which led to the best adsorption performance compared to that of PAF-80 and PAF-81. The Langmuir adsorption capacity of PAF-82 for BPA, 2-NO, and PCMX is 689 mg g-1, 431 mg g-1, and 480 mg g-1, respectively, which surpasses most previously reported adsorbents. In addition, after 5 cycles of regeneration, it still maintained a high removal rate for pollutants. The obtained results reveal that micropollutant adsorption in water is not controlled by a single factor, but is the result of a synergy of multiple factors, including specific surface area, polar functional groups, pore size distribution, and skeleton conjugation. Our study has revealed the great potential of hydroxyl PAFs for efficient adsorption of organic micropollutants in water.

| S-EPMC9055414 | biostudies-literature

A neutral porous organic polymer host for the recognition of anionic dyes in water.

Project description:Neutral hosts for the recognition of anionic guests in water remain underdeveloped due to the inherent thermodynamic barrier for desolvation. To address this challenge, we have repurposed crosslinked porous organic polymers (POPs) as hosts. This polymer architecture affords a hydrophobic environment with a densely packed array of urea hydrogen bond donors to cooperatively promote anion desolvation and recognition in water. Using the principles of supramolecular design, we demonstrate through adsorption assays that the resulting Urea-POP-1 can recognize structurally different dyes containing phosphonate, sulfonate, and carboxylate anions in water. Moreover, when compared to Methyl-POP-1, a control POP lacking hydrogen bond donors, we find that the driving force for desolvation and adsorption of each dye is achieved through hydrophobic interactions with the POP backbone and, more importantly, cooperative hydrogen bonding interactions with the urea sidechains. This starting point sets the stage to exploit the modularity of our design to build a family of neutral polymer hosts with tunable pore sizes and anion preferences for fundamental investigations and targeted applications.

| S-EPMC8159435 | biostudies-literature

Highly efficient, reversible iodine capture and exceptional uptake of amines in viologen-based porous organic polymers.

Project description:A viologen-based porous organic polymer, POP-V-VI, was designed and synthesized by a facile nucleophilic substitution between cyanuric chloride and 1,2-bis(4-pyridinium) ethylene. Together with the reported POP-V-BPY with a similar structure, these viologen-based porous organic polymers bear high charge density, phenyl ring and nitrogenous affinity sites, which endow them with excellent iodine vapor uptake capacity (4860 mg g-1 for POP-V-VI and 4200 mg g-1 for POP-V-BPY) and remarkably high adsorption capacity for pyridine (4470 mg g-1 for POP-V-VI and 8880 mg g-1 for POP-V-BPY) and other aliphatic amines. POP-V-VI and POP-V-BPY could be efficiently recycled and reused three times without significant loss of iodine vapor uptake. All these results demonstrate that POP-V-VI and POP-V-BPY are promising adsorbents for practical applications in portable devices such as gas masks.

| S-EPMC9054242 | biostudies-literature

Pd NP-Decorated N-Rich Porous Organic Polymer as an Efficient Catalyst for Upgradation of Biofuels.

Project description:Hydrodeoxygenation process is a potential route for upgrading biofuel intermediates, like vanillin, which is obtained in huge quantities through the chemical treatment of the abundant lignocellulosic biomass resources of nature, and this is attracting increasing attentions over the years. Herein, we report the grafting of palladium nanoparticles at the surface of porous organic polymer Pd-PDVTTT-1 synthesized through the co-condensation of 1,3,5-triallyl-1,3,5-triazine-2,4,6-(1H,3H,5H)-trione and divinylbenzene in the presence of radical initiator under solvothermal reaction conditions. The Pd-PDVTTT-1 material has been characterized thoroughly by powder X-ray diffraction, nitrogen sorption, ultra-high-resolution transmission electron Microscopy, Fourier-transform infrared spectroscopy, 13C MAS NMR, and X-ray photoelectron spectroscopy analyses. High surface area together with good thermal stability of the Pd-PDVTTT-1 material has motivated us to explore its potential as heterogeneous catalyst in the hydrodeoxygenation of vanillin for the production of upgraded biofuel 2-methoxy-4-methylphenol in almost quantitative yield and high selectivity (94%).

| S-EPMC6644363 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data