Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Large datasets of water vapor sorption, mass diffusion immersed in water, hygroscopic expansion and mechanical properties of flax fibre/shape memory epoxy hygromorph composites.

ABSTRACT: This data article presents four experimental sets of results related to flax fibre composites with epoxy shape memory polymer matrix: water vapor absorption, mass diffusion immersed in water, hygroscopic expansion, mechanical properties. The water vapor absorption tests are described in raw data related to four types of laminates with weights measured at different relative humidity (0%, 9%, 33%, 44%,75%, 85% and 100%). The mass diffusion experiments are related to weights of immersed samples over time. The unidirectional composite hygroscopic expansion is also measured along the fibre longitude and transverse directions. The mechanical properties of flax composite at various temperatures (20°C, 40°C, 60°C, 80°C and 100°C) and humidity environments (50% and immersed) are also described. Load-displacement diagrams of the hygromorph composites are converted into stress-strain diagrams via a compliance calibration, from which the tensile moduli are extracted. The data presented in this article can provide a benchmark for the development of new models, or for the determination of other properties via post processing. The detailed interpretation of the data can be found in [1]. The data is available in the Mendeley Data repository at [2].

SUBMITTER: Li Q

PROVIDER: S-EPMC9234088 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Laccase-Enzyme Treated Flax Fibre for Use in Natural Fibre Epoxy Composites.

Project description:Natural fibres have a high potential as reinforcement of polymer matrices, as they combine a high specific strength and modulus with sustainable production and reasonable prices. Modifying the fibre surface is a common method to increase the adhesion and thereby enhance the mechanical properties of composites. In this study, a novel sustainable surface treatment is presented: the fungal enzyme laccase was utilised with the aim of covalently binding the coupling agent dopamine to flax fibre surfaces. The goal is to improve the interfacial strength towards an epoxy matrix. SEM and AFM micrographs showed that the modification changes the surface morphology, indicating a deposition of dopamine on the surface. Fibre tensile tests, which were performed to check whether the fibre structure was damaged during the treatment, showed that no decrease in tensile strength or modulus occurred. Single fibre pullout tests showed a 30% increase in interfacial shear strength (IFSS) due to the laccase-mediated bonding of the coupling agent dopamine. These results demonstrate that a laccase + dopamine treatment modifies flax fibres sustainably and increases the interfacial strength towards epoxy.

| S-EPMC7600163 | biostudies-literature

Nanoporous composites prepared by a combination of SBA-15 with Mg-Al mixed oxides. Water vapor sorption properties.

Project description:This work presents two easy ways for preparing nanostructured mesoporous composites by interconnecting and combining SBA-15 with mixed oxides derived from a calcined Mg-Al hydrotalcite. Two different Mg-Al hydrotalcite addition procedures were implemented, either after or during the SBA-15 synthesis (in situ method). The first procedure, i.e., the post-synthesis method, produces a composite material with Mg-Al mixed oxides homogeneously dispersed on the SBA-15 nanoporous surface. The resulting composites present textural properties similar to the SBA-15. On the other hand, with the second procedure (in situ method), Mg and Al mixed oxides occur on the porous composite, which displays a cauliflower morphology. This is an important microporosity contribution and micro and mesoporous surfaces coexist in almost the same proportion. Furthermore, the nanostructured mesoporous composites present an extraordinary water vapor sorption capacity. Such composites might be utilized as as acid-base catalysts, adsorbents, sensors or storage nanomaterials.

| S-EPMC4143113 | biostudies-literature

Thermo-Mechanical Behaviour of Flax-Fibre Reinforced Epoxy Laminates for Industrial Applications.

Project description:The present work describes the experimental mechanical characterisation of a natural flax fibre reinforced epoxy polymer composite. A commercial plain woven quasi-unidirectional flax fabric with spun-twisted yarns is employed in particular, as well as unidirectional composite panels manufactured with three techniques: hand-lay-up, vacuum bagging and resin infusion. The stiffness and strength behaviours are investigated under both monotonic and low-cycle fatigue loadings. The analysed material has, in particular, shown a typical bilinear behaviour under pure traction, with a knee yield point occurring at a rather low stress value, after which the material tensile stiffness is significantly reduced. In the present work, such a mechanism is investigated by a phenomenological approach, performing periodical loading/unloading cycles, and repeating tensile tests on previously "yielded" samples to assess the evolution of stiffness behaviour. Infrared thermography is also employed to measure the temperature of specimens during monotonic and cyclic loading. In the first case, the thermal signal is monitored to correlate departures from the thermoelastic behaviour with the onset of energy loss mechanisms. In the case of cyclic loading, the thermoelastic signal and the second harmonic component are both determined in order to investigate the extent of elastic behaviour of the material.

| S-EPMC5458889 | biostudies-other

Mesoporosity of Delignified Wood Investigated by Water Vapor Sorption.

Project description:Wood represents a highly suitable biobased scaffold for the development of mechanically robust and functional materials. Its functionalizability can be enhanced by means of delignification, resulting in an increase in porosity due to partial or complete removal of lignin and hemicellulose constituents. In this work, the impact of partial and complete delignification on the mesoporous structure is investigated via water vapor sorption isotherms and deuterium exchange. Pore size distributions of wood samples with five different delignification levels were compared to native wood. The derived pore size distributions at the water swollen state reveal an increase in porosity with decreasing lignin content. However, after complete lignin removal, drying causes a nonreversible collapse of the cell wall, which results in reduced porosity.

| S-EPMC6682004 | biostudies-literature

Experimental evaluation of stiffness predictions of multiaxial flax fibre composites by classical laminate theory.

Project description:Despite the good mechanical properties of natural fibre composites, their use in load-bearing components is still limited, which may be due to lack of knowledge and confidence in calculating the performance of the composites by mechanical models. The present study is providing an experimental evaluation of stiffness predictions of multiaxial flax fibre composite by classical laminate theory (CLT). The experimental base is (i) multiaxial flax fibre composites fabricated with two types of biaxial non-crimp fabrics, having a nominal yarn orientation of ±45°, and (ii) uniaxial flax fibre composites fabricated with the same flax yarn as used in the fabrics. The fabricated composites are characterised by volumetric composition, yarn orientation and tensile properties. A fast and easy operational Fast Fibre Orientation (FFO) method is developed to determine the actual yarn orientation in fabrics and composites. It is demonstrated that the FFO method is a robust method, giving repeatable results for yarn orientations, and it can be used both on fabrics and composites. CLT predictions of stiffness of the multiaxial flax fibre composites are shown to be in good agreement with the measured stiffnesses of the composites in three testing directions (0°, 45°, and 90°). The use of the actual yarn orientations measured by the FFO method, instead of the nominal yarn orientations of ±45°, is shown to result in improved CLT predictions of stiffness with a mean deviation between predictions and measurements on 0.2 GPa. Altogether, it is demonstrated that stiffness of multiaxial flax fibre composites can be accurately predicted by CLT, without any fitting constants, based on independently determined stiffness parameters of the related uniaxial flax fibre composite, and based on measured yarn orientations in the flax fibre fabric.

| S-EPMC7313735 | biostudies-literature

Scanning electron microscopy datasets for local fibre volume fraction determination in non-crimp glass-fibre reinforced composites.

Project description:The fatigue damage evolution depends on the local fibre volume fraction as observed in the co-submitted publication [1]. Conventionally, fibre volume fractions are determined as an averaged overall fibre volume fraction determined from small cuts of the laminate. Alternatively, automatically stitching of scanning electron microscopy (SEM) images can make high-resolution scans of large cross-section area with large contrast between the polymer and glass-fibre phase. Therefore, local distribution of the fibre volume fraction can be characterised automatically using such scan-data. The two datasets presented here cover two large Field of Views scanning electron microscopy (SEM) images. The two images is generated from between 1200 and 1800 high-resolution scan pictures which have been stitched into two high-resolution tif-files. The resolution corresponds to between 700 and 5000 pixels covering each fibre. The datasets are coming from two different non-crimp fabric glass fibre reinforced epoxy composites typically used in the wind turbine industry. Depending on the regions analysed, fibre volume fraction in the range of 50-85% is found. The maximum local fibre volume fraction is found averaging the local fibre volume fraction over 5 × 5 fibre diameter (80 × 80 µm2) areas. The local fibre volume fraction has been used in the analysis performed in [1].

| S-EPMC7905358 | biostudies-literature

Water Vapor Sorption and Diffusivity in Bio-Based Poly(Ethylene Vanillate)-PEV.

Project description:The dynamic and equilibrium water vapor sorption properties of amorphous and highly crystalline poly(ethylene vanillate) (PEV) films were determined via gravimetric analysis, at 20 °C, over a wide range of relative humidity (0-95% RH). At low RH%, the dynamic of the sorption process obeys Fick's law while at higher relative humidity it is characterized by a drift ascribable to non-Fickian relaxations. The non-Fickian relaxations, which are responsible for the incorporation of additional water, are correlated with the upturn of the sorption isotherms and simultaneously the hysteresis recorded between sorption and desorption cycles. The sorption isotherms of amorphous and highly crystalline PEV are arranged in the same concentration range of that of PET proving the similarity of the two polyesters. Water diffusion coefficients, whose determination from individual kinetic sorption/desorption curves required treatment with the Barens-Hopfenberg model, were demonstrated to be ≈ 10× higher for amorphous PEV compared to amorphous PET. Such a difference originates from the enhanced segmental flexibility of PEV chains.

| S-EPMC7916482 | biostudies-literature

Sorption Study of Water Vapor and a Dye on Chitosan-Based Framework Materials.

Project description:Two types of chitosan framework materials were functionalized with carboxyl groups via a supramolecular cross-linking process by citric acid (CA) and trimesic acid (TMA). The role of surface chemistry (i.e., functional groups) and textural properties (i.e., pore size and surface area) in adsorption properties of these chitosan frameworks toward water vapor and dye was investigated. Extensive characterizations using N2 adsorption-desorption, contact angle measurements, differential scanning calorimetry, atomic force microscopy, and confocal microscopy were carried out to understand structure-property relationships of these framework materials. The dynamic vapor sorption analyzer measured water vapor sorption percentage (R %) values of 46.7, 43.9, and 41.5 for TMA1, CA1 framework materials, and chitosan, respectively. The calculated adsorption percentage values of dyes in aqueous solution were 69.7, 39.2, and 18.8 (R %) for TMA1, CA1, and chitosan, respectively.

| S-EPMC7469416 | biostudies-literature

Effect of Crystallinity on Water Vapor Sorption, Diffusion, and Permeation of PLA-Based Nanocomposites.

Project description:The effects of crystalline morphology and presence of nanoparticles such as cellulose nanofibers (CNFs), organically modified nanoclay (C30B), or a combination of both on water vapor sorption and diffusion in polylactide (PLA) were evaluated by a quartz spring microbalance (QSM). It was found that the large spherulite size induced by high-temperature processing leads to an increase in water sorption and a substantial reduction of diffusion with increasing crystallinity. Contrarily, small-sized spherulites, arising after low-temperature processing during solvent-casting, showed a different behavior with a slight decrease in both water vapor sorption and diffusion with increasing crystallinity. These observations suggest that solvent-casting at low temperatures should not be used to predict the properties a material will show after industrial-scale processing. From the analysis of the nanocomposite materials, it was concluded that nanoparticles affected the material's properties not only by themselves but also by modifying the crystalline morphology. Interestingly, this led to CNF showing similar performance to C30B, decreasing water diffusivity (21 vs 27%) on isothermally crystallized materials despite its less favorable geometry. Additionally, the incorporation of 1 wt % CNF and C30B decreased water vapor transmission rate (WVTR) by 24% under an amorphous state but by 44% in a crystallized state, which makes hybrid CNF/C30B composites a promising food packaging material.

| S-EPMC7331067 | biostudies-literature

Novel Antibacterial and Toughened Carbon-Fibre/Epoxy Composites by the Incorporation of TiO2 Nanoparticles Modified Electrospun Nanofibre Veils.

Project description:The inclusion of electrospun nanofiber veils was revealed as an effective method for enhancing the mechanical properties of fiber-reinforced epoxy resin composites. These veils will eventually allow the incorporation of nanomaterials not only for mechanical reinforcement but also in multifunctional applications. Therefore, this paper investigates the effect of electrospun nanofibrous veils made of polyamide 6 modified with TiO2 nanoparticles on the mechanical properties of a carbon-fiber/epoxy composite. The nanofibers were included in the carbon-fiber/epoxy composite as a single structure. The effect of positioning these veils in different composite positions was investigated. Compared to the reference, the use of unmodified and TiO2 modified veils increased the flexural stress at failure and the fracture toughness of composites. When TiO2 modified veils were incorporated, new antibacterial properties were achieved due to the photocatalytic properties of the veils, widening the application area of these composites.

| S-EPMC6780269 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data