Browse
Submit Data
Databases
API
Help

Dataset Information

19 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Design of a Sensitive Fluorescent Zn-Based Metal-Organic Framework Sensor for Cimetidine Monitoring in Biological and Pharmaceutical Samples.

ABSTRACT: A new highly fluorescent zinc-organic framework [Zn₂(btca)(DMSO)₂]_n (Zn-MOF) was prepared via in situ ligand formation by the solvothermal reaction of Zn(NO₃)₂·6H₂O and pyromellitic dianhydride (PMDA) in DMSO solvent. During the solvothermal reaction, PMDA was gradually hydrolyzed to a pyromellitic acid, 1,2,4,5-benzene tetracarboxylic acid (H₄btca), to provide a tetracarboxylic acid as a linker in the reaction medium. Single-crystal X-ray diffraction analysis exhibits a 3D porous structure with open tetragonal channels running along the crystallographic c-axis. The Zn-MOF was explored as an on-mode fluorescent sensor for tracing cimetidine in biological fluids and pharmaceutical samples in the presence of interfering species. The results show a quick response in a short time range. The characteristics of this sensor were investigated by field-emission scanning electron microscopy, dynamic light scattering, energy-dispersive X-ray analysis, powder X-ray diffraction, Fourier transform infrared and UV-vis spectroscopy as well as thermogravimetric, and elemental analyses.

SUBMITTER: Afravi Z

PROVIDER: S-EPMC9260946 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Fluorescent and Catalytic Properties of a 2D Lamellar Zn Metal-Organic Framework with sql Network Structure.

Project description:A two-dimensional (2D) lamellar Zn metal-organic framework (Zn-MOF, 1) with a fluorescent 1,6-di(pyridin-3-yl)pyrene (3-DPPy) and 1,4-benzenedicarboxylate (BDC2-) bridging linkers was prepared and structurally characterized. The chemical formula of 1 is [Zn(μ-3-DPPy)(μ-BDC)]n. The mononuclear Zn(II) ion, acting as a node, is tetrahedrally coordinated with two 3-DPPy and two BDC linkers. The coordination environment of Zn(II) is a distorted tetrahedral geometry. The Zn-MOF is the sql network structure based on topology analysis. The undulated 2D sheets of 1 tightly pack together to form a lamellar structure. The pyrene moieties are parallelly oriented to each other. The Zn-MOF is not porous, possibly because the mononuclear Zn(II) node did not form cluster-based secondary building units due to the less symmetric 3-DPPy. The steady-state fluorescence measurements indicate that the fluorescence signal of the 1 is slightly blue-shifted compared to the free 3-DPPy in the solid state. The excimer emission band at 463 nm for crystalline 3-DPPy is shifted to 447 nm for 1. The value of 447 nm is also a blue-shift value compared to nonsubstituted pyrene crystals (470 nm). Despite its nonporosity, the surface Lewis acidic sites of 1 could catalyze the transesterification of esters. Surface defect sites are responsible for this catalytic activity.

| S-EPMC10488886 | biostudies-literature

Highly Selective Metal-Organic Framework Textile Humidity Sensor.

Project description:The increase in demand and popularity of smart textiles brings new and innovative ideas to develop a diverse range of textile-based devices for our daily life applications. Smart textile-based sensors (TEX sensors) become attractive due to the potential to replace current solid-state sensor devices with flexible and wearable devices. We have developed a smart textile sensor for humidity detection using a metal-organic framework (MOF) as an active thin-film layer. We show for the first time the use of the Langmuir-Blodgett (LB) technique for the deposition of a MIL-96(Al) MOF thin film directly onto the fabrics containing interdigitated textile electrodes for the fabrication of a highly selective humidity sensor. The humidity sensors were made from two different types of textiles, namely, linen and cotton, with the linen-based sensor giving the best response due to better coverage of MOF. The TEX sensor showed a reproducible response after multiple cycles of measurements. After 3 weeks of storage, the sensor showed a moderate decrease in response. Moreover, TEX sensors showed a high level of selectivity for the detection of water vapors in the presence of several volatile organic compounds (VOCs). Interestingly, the selectivity is superior to some of the previously reported MOF-coated solid-state interdigitated electrode devices and textile sensors. The method herein described is generic and can be extended to other textiles and coating materials for the detection of toxic gases and vapors.

| S-EPMC7467549 | biostudies-literature

Ultrasensitive Assay of Alkaline Phosphatase Based on the Fluorescent Response Difference of the Metal-Organic Framework Sensor.

Project description:The assay of alkaline phosphatase (ALP) is important in clinical diagnosis because the abnormal expression of this enzyme is related to many serious diseases. In this work, using a luminescent metal-organic framework (MOF) as the sensor, a fluorescent method was developed for the activity assay of ALP. With nanoscale particle size, the prepared MOF sensor exhibited good dispersability and stable photoluminescence in aqueous suspension. The emission of this MOF is inert to p-nitrophenylphosphate (NPP) but could be efficiently quenched by its dephosphorylated product, p-nitrophenol. Taking advantage of this feature, this MOF was added to the system of ALP-catalyzed NPP dephosphorylation to transduce the proceeding of the reaction real-timely to the fluorescent signal. The enzyme activity could be calculated based on the recorded kinetic trace. This method presented a low detection limit (2 × 10-3 U L-1) and a wide quantification range (0.6-90 U L-1) in our experiments, showing its quantification capability challenges the best of current ALP analytical methods. As a practical application, our method was successfully applied to the ALP analysis in human serum samples.

| S-EPMC6964306 | biostudies-literature

Unraveling the Guest-Induced Switchability in the Metal-Organic Framework DUT-13(Zn)*.

Project description:The switching mechanism of the flexible framework Zn4 O(benztb)1.5 (benztb=N,N,N',N'-benzidine tetrabenzoate), also known as DUT-13, was studied by advanced powder X-ray diffraction (PXRD) and gas physisorption techniques. In situ synchrotron PXRD experiments upon physisorption of nitrogen (77 K) and n-butane (273 K) shed light on the hitherto unnoticed guest-induced breathing in the MOF. The mechanism of contraction is based on the conformationally labile benztb ligand and accompanied by a reduction in specific pore volume from 2.03 cm3 g-1 in the open-pore phase to 0.91 cm3 g-1 in the contracted-pore phase. The high temperature limit for adsorption-induced contraction of 170 K, determined by systematic temperature variation of methane adsorption isotherms, indicates that the DUT-13 framework is softer than other mesoporous MOFs like DUT-49 and does not support the formation of overloaded metastable states required for negative gas-adsorption transitions.

| S-EPMC8362161 | biostudies-literature

Temperature-dependent interchromophoric interaction in a fluorescent pyrene-based metal-organic framework.

Project description:Compounds exhibiting tuneable fluorescence emission upon heating or cooling are considered smart materials as their optical properties can be exquisitely controlled by adjusting the external temperature. Herein, we report such a material, which is a porous pyrene-based metal-organic framework with a chemical formula of [Mg1.5(HTBAPy)(H2O)2]·3DMF (H4TBAPy = 1,3,6,8-tetrakis(p-benzoic acid)pyrene), named SION-7. The bulk solid material of SION-7 can display either monomer or excimer fluorescence emission due to the temperature-dependent extent of interchromophoric interactions between the HTBAPy3- ligands within the framework. Consequently, the fluorescence emission colours gradually change from blue at low temperature (80 K) to yellow-green at high temperature (450 K). Interestingly, while kept in a relatively wide temperature range of 80-200 K, SION-7 displays a structured monomer-like spectrum and its colour changes reversibly from deep to light blue. Ex situ variable-temperature (100-350 K) single-crystal X-ray diffractometry studies revealed the impact of solvent content on the optical properties of SION-7, and illustrated the correlation between the position of the phenylene groups of the HTBAPy3- ligands at different temperatures and the interchromophoric interaction. Our study demonstrates a step forward towards the design of tuneable thermofluorochromic materials sought by optoelectronics.

| S-EPMC6585595 | biostudies-literature

Application of a Pillared-Layer Zn-Triazolate Metal-Organic Framework in the Dispersive Miniaturized Solid-Phase Extraction of Personal Care Products from Wastewater Samples.

Project description:The pillared-layer Zn-triazolate metal-organic framework (CIM-81) was synthesized, characterized, and used for the first time as a sorbent in a dispersive micro-solid phase extraction method. The method involves the determination of a variety of personal care products in wastewaters, including four preservatives, four UV-filters, and one disinfectant, in combination with ultra-high performance liquid chromatography and UV detection. The CIM-81 MOF, constructed with an interesting mixed-ligand synthetic strategy, demonstrated a better extraction performance than other widely used MOFs in D-µSPE such as UiO-66, HKUST-1, and MIL-53(Al). The optimization of the method included a screening design followed by a Doehlert design. Optimum conditions required 10 mg of CIM-81 MOF in 10 mL of the aqueous sample at a pH of 5, 1 min of agitation by vortex and 3 min of centrifugation in the extraction step; and 1.2 mL of methanol and 4 min of vortex in the desorption step, followed by filtration, evaporation and reconstitution with 100 µL of the initial chromatographic mobile phase. The entire D-µSPE-UHPLC-UV method presented limits of detection down to 0.5 ng·mL-1; intra-day and inter-day precision values for the lowest concentration level (15 ng·mL-1)-as a relative standard deviation (in %)-lower than 8.7 and 13%, respectively; average relative recovery values of 115%; and enrichment factors ranging from ~3.6 to ~34. The reuse of the CIM-81 material was assessed not only in terms of maintaining the analytical performance but also in terms of its crystalline stability.

| S-EPMC6412874 | biostudies-literature

Highly-sensitive optical organic vapor sensor through polymeric swelling induced variation of fluorescent intensity.

Project description:Traditional optical organic vapor sensors with solvatochromic shift mechanisms have lower sensitivity due to weak intermolecular interactions. Here, we report a general strategy to prepare a higher sensitivity optical organic vapor sensor through polymeric swelling-induced variation of fluorescent intensity. We combine one-dimensional polymeric structures and aggregation-induced emission (AIE) molecules together to form a polymer/AIE microwires array as a sensor. The prepared sensors based on different commercial polymers can successfully classify and identify various organic vapors. Among them, the poly(vinyl butyral)/AIE microwires array can detect methanol vapor as low as 0.05% of its saturation vapor pressure. According to the theory of like dissolves like, we further fabricate a polymer/AIE microwires array derived from designable polyethersulfones, through regulating their side chains, to distinguish similar organic vapors of benzene and toluene. Both experimental and theoretical simulation results reveal that specific molecular interactions between the polyethersulfones and organic vapors can improve the specific recognition performance of the sensors.

| S-EPMC6143602 | biostudies-literature

Magnetic metal organic framework for pre-concentration of ampicillin from cow milk samples.

Project description:The aim of this study is a present of a simple solvothermal synthesis approach to preparation of Cu-based magnetic metal organic framework (MMOF) and subsequently its application as sorbent for ultrasound assisted magnetic solid phase extraction (UAMSPE) of ampicillin (AMP) from cow milk samples prior to high performance liquid chromatography-Ultraviolet (HPLC-UV) determination. Characteristics of prepared MMOF were fully investigated by different techniques which showed the exclusive properties of proposed sorbent in terms of proper functionality, desirable magnetic property and also high specific surface area. Different influential factors on extraction recovery including sorbent dosage, ultrasonic time, washing solvent volume and eluent solvent volume were assessed using central composite design (CCD) based response surface methodology (RSM) as an operative and powerful optimization tool. This is the first report for determination of AMP using MMOF. The proposed method addressed some drawbacks of other methods and sorbents for determination of AMP. The presented method decreases the extraction time (4 min) and also enhances adsorption capacity (250 mg/g). Moreover, the magnetic property of presented sorbent (15 emu/g) accelerates the extraction process which does not need filtration, centrifuge and precipitation procedures. Under the optimized conditions, the proposed method is applicable for linear range of 1.0-5000.0 μg/L with detection limit of 0.29 μg/L, satisfactory recoveries (≥95.0%) and acceptable repeatability (RSD less than 4.0%). The present study indicates highly promising perspectives of MMOF for highly effective analysis of AMP in complicated matrices.

| S-EPMC7474158 | biostudies-literature

Unexpected Diffusion Anisotropy of Carbon Dioxide in the Metal-Organic Framework Zn<sub>2</sub>(dobpdc).

Project description:Metal-organic frameworks are promising materials for energy-efficient gas separations, but little is known about the diffusion of adsorbates in materials featuring one-dimensional porosity at the nanoscale. An understanding of the interplay between framework structure and gas diffusion is crucial for the practical application of these materials as adsorbents or in mixed-matrix membranes, since the rate of gas diffusion within the adsorbent pores impacts the required size (and therefore cost) of the adsorbent column or membrane. Here, we investigate the diffusion of CO2 within the pores of Zn2(dobpdc) (dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) using pulsed field gradient (PFG) nuclear magnetic resonance (NMR) spectroscopy and molecular dynamics (MD) simulations. The residual chemical shift anisotropy for pore-confined CO2 allows PFG NMR measurements of self-diffusion in different crystallographic directions, and our analysis of the entire NMR line shape as a function of the applied field gradient provides a precise determination of the self-diffusion coefficients. In addition to observing CO2 diffusion through the channels parallel to the crystallographic c axis (self-diffusion coefficient D∥ = (5.8 ± 0.1) × 10-9 m2 s-1 at a pressure of 625 mbar CO2), we unexpectedly find that CO2 is also able to diffuse between the hexagonal channels in the crystallographic ab plane (D⊥ = (1.9 ± 0.2) × 10-10 m2 s-1), despite the walls of these channels appearing impermeable by single-crystal X-ray crystallography and flexible lattice MD simulations. Observation of such unexpected diffusion in the ab plane suggests the presence of defects that enable effective multidimensional CO2 transport in a metal-organic framework with nominally one-dimensional porosity.

| S-EPMC8240119 | biostudies-literature

Structure, Luminescent Sensing and Proton Conduction of a Boiling-Water-Stable Zn(II) Metal-Organic Framework.

Project description:A novel Zn(II) metal-organic framework [Zn4O(C30H12F4O4S8)3]n, namely ZnBPD-4F4TS, has been constructed from a fluoro- and thiophenethio-functionalized ligand 2,2',5,5'-tetrafluoro-3,3',6,6'-tetrakis(2-thiophenethio)-4,4'-biphenyl dicarboxylic acid (H2BPD-4F4TS). ZnBPD-4F4TS shows a broad green emission around 520 nm in solid state luminescence, with a Commission International De L'Eclairage (CIE) coordinate at x = 0.264, y = 0.403. Since d10-configured Zn(II) is electrochemically inert, its photoluminescence is likely ascribed to ligand-based luminescence which originates from the well-conjugated system of phenyl and thiophenethio moieties. Its luminescent intensities diminish to different extents when exposed to various metal ions, indicating its potential as an optical sensor for detecting metal ion species. Furthermore, ZnBPD-4F4TS and its NH4Br-loaded composite, NH4Br@ZnBPD-4F4TS, were used for proton conduction measurements in different relative humidity (RH) levels and temperatures. Original ZnBPD-4F4TS shows a low proton conductivity of 9.47 × 10-10 S cm-1 while NH4Br@ZnBPD-4F4TS shows a more than 25,000-fold enhanced value of 2.38 × 10-5 S cm-1 at 40 °C and 90% RH. Both of the proton transport processes in ZnBPD-4F4TS and NH4Br@ZnBPD-4F4TS belong to the Grotthuss mechanism with Ea = 0.40 and 0.32 eV, respectively.

| S-EPMC8401761 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data