Dataset Information

Quantifying changes in ambient NO_x, O₃ and PM₁₀ concentrations in Austria during the COVID-19 related lockdown in spring 2020.

ABSTRACT: During spring 2020, unprecedented changes in local and regional emissions have occurred around the globe due to governmental restrictions associated with COVID-19. Many European countries including Austria issued partial curfews or stay-at-home order policies, which have impacted ambient air quality through reductions in non-essential transportation and energy consumption of industrial sites and work places. Here, we analyse the effect of these measures on ambient concentrations of nitrogen oxides (NO_x), ozone (O₃) and particulate matter (PM₁₀) during the first nationwide lockdown in Austria (16.03.2020 to 14.04.2020). To ensure a robust analysis, the Austrian domain is divided into four individual subsectors contingent on regional climate. For air quality analysis a novel method is applied for filtering days with comparable weather conditions during the 2020 lockdown and spring 2017 to 2019. In general, our analysis shows decreasing pollutant concentrations, although in magnitude dependent on pollutant and regional subdomain. Largest reductions are found for NO_x reaching up to -68% at traffic sites reflecting the substantial decrease in non-essential transport. Changes in the O₃ concentrations at background sites show a rather weak response to NO_x declines varying between roughly -18 to +8% for both the median and the upper tail of the distribution. Occasional site level increases in O₃ concentrations can be attributed to comparably weak titration during night-time. PM₁₀ concentrations show the smallest response among air pollutants, attributable to manifold precursor sources not affected by the lockdown measures. However, our analysis indicates also a shift of PM₁₀ distributions at traffic sites closer to distributions observed at background sites.

Supplementary information

The online version contains supplementary material available at 10.1007/s11869-022-01232-w.

SUBMITTER: Staehle C

PROVIDER: S-EPMC9305063 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:We quantify the contributions of long-range and regionally transported aerosols to ambient primary PM2.5 and PM10 in a representative United States industrialized/urban atmosphere via detailed elemental analysis and chemical mass balance (CMB) modeling after identifying their presence using a variety of publicly available satellite data/information, software products, and synoptic-scale aerosol models. A year-long study in Houston, Texas identified North African dust as the principal long-range global source of primary particulate matter (PM). CMB estimated transatlantic dust from the Sahara-Sahel region to be dominant in the summer months contributing an average of 3.5 μg m-3 to PM2.5 and 7.9 μg m-3 to PM10 during May-August, i.e., the active Saharan dust season. Biomass burning was the chief source of regionally transported PM impacting air quality on different occasions throughout the year depending on the fire location. Four major biomass combustion events affecting air quality in Texas were calculated to contribute an average of 1.3 μg m-3 to PM2.5 and 1.4 μg m-3 to PM10 in corresponding samples whose origins were tracked to Canada, southeastern states of USA, and Central America using fire maps, HYSPLIT back trajectories, and the Navy Aerosol Analysis and Prediction System global aerosol model. Elemental concentrations and signature ratios revealed significant mixing of potassium, rare earth metals, and vanadium from proximal and distal crustal (natural) sources with anthropogenically emitted PM. This demonstrates the need to isolate the non-mineral components of these metals to employ them as tracers for primary PM emitted by biomass burning, petroleum refineries, and oil combustion. Transboundary contributions to primary PM2.5 were 1.5 μg m-3 and 3.1 μg m-3 to PM10 adding 16% to annual average mass concentration of both size fractions demonstrating that local sources were primarily responsible for ambient air quality with non-trivial contributions from international and interstate sources. Rigorously identifying and quantifying aerosol sources assists in improving air quality management policies designed to protect public health and comply with ever-decreasing federal PM standards that allow state agencies to exclude contributions that are not reasonably controllable or preventable from regulatory decisions and actions.

Project description:Fine particulate matter is considered to be the most significant ambient air pollutant in terms of potential health impacts. Therefore, it is important that regulators are able to accurately assess the exposure of populations to PM10 and PM2.5 across municipal areas. We report on the practicalities of using a laser light scattering portable particulate monitor (Turnkey Instruments DustMate), in combination with a GPS, to map PM10 and PM2.5 concentrations on city-wide scales in Newcastle upon Tyne/Gateshead (UK), during a series of walking surveys. A heated inlet is necessary to remove moisture droplets from the sampled air prior to analysis by the instrument, though this also results in the loss of volatile particulate components, particularly from the PM2.5 fraction. A co-location calibration study was carried out with a reference urban background Tapered Element Oscillating Micro-Balance/Filter Dynamics Measuring System (TEOM-FDMS) system in Newcastle that is part of the UK's Automatic Urban and Rural Network (AURN) of air quality monitoring stations. For PM10, orthogonal regression of the DustMate against TEOM-FDMS data gave a slope and intercept of 1.02 ± 0.06 and -3.7 ± 1.2, respectively (R2 = 0.73), whereas for PM2.5, the respective values were 0.78 ± 0.06 and -0.63 ± 0.55 (R2 = 0.79). These parameters are comparable to literature calibration studies using this technology. There was good agreement between simultaneous samples taken using two DustMate instruments: for PM10, a slope and intercept of 1.05 ± 0.03 and 0.36 ± 0.5, respectively (R2 = 0.73), were obtained, whereas for the PM2.5, the respective values were 0.79 ± 0.01 and 0.19 ± 0.06 (R2 = 0.86). Correction factors based on the slope and intercepts obtained from the calibration exercise were applied to raw data collected from the DustMate. An annually-normalised correction procedure was then used to account for different background particulate concentrations on different sampling days. These corrected PM10 and PM2.5 concentrations and corresponding GPS coordinates were displayed on a base map using Google Fusion Tables and Google Earth Professional. Almost all areas surveyed in Newcastle/Gateshead were well below the EU Air Quality Standards for PM10 and PM2.5.

Dataset Information

Quantifying changes in ambient NO_x, O₃ and PM₁₀ concentrations in Austria during the COVID-19 related lockdown in spring 2020.

Supplementary information

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets

Dataset Information

Quantifying changes in ambient NOx, O3 and PM10 concentrations in Austria during the COVID-19 related lockdown in spring 2020.

Supplementary information

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets

Quantifying changes in ambient NO_x, O₃ and PM₁₀ concentrations in Austria during the COVID-19 related lockdown in spring 2020.