Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Isolation and characterization of renal cortical membranes using an aqueous two-phase partition technique.

ABSTRACT: The aqueous two-phase partition technique is a simple, rapid and inexpensive method for the fractionation of membrane preparations. Aqueous two-phase partitioning separates according to surface properties such as charge and hydrophobicity, making it complementary to established centrifugation techniques, which separate on the basis of density. Although aqueous two-phase partitioning has been successfully applied to animal tissues, there are limited data on the functional properties of the isolated membranes. We have applied the aqueous two-phase partition technique to rat renal brush-border membrane vesicles and sheets. Our aim was to remove organelle contamination while maintaining the functional properties of the membranes. Evidence from marker enzyme analysis and electron microscopy supports the conclusion that renal brush-border membranes are fractionated separate from the mitochondria and endoplasmic reticulum. This separation procedure did not alter the Na(+)-dependent transport of brush-border membrane vesicles. Na(+)-D-glucose symporter and Na(+)-H+ antiporter activity in the fractionated preparation increased to the same extent as did the enrichment of enzyme markers for brush-border membranes.

SUBMITTER: Hammond TG

PROVIDER: S-EPMC1134176 | biostudies-other | 1993 Jun

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

High-yield isolation of extracellular vesicles using aqueous two-phase system.

Project description:Extracellular vesicles (EVs) such as exosomes and microvesicles released from cells are potential biomarkers for blood-based diagnostic applications. To exploit EVs as diagnostic biomarkers, an effective pre-analytical process is necessary. However, recent studies performed with blood-borne EVs have been hindered by the lack of effective purification strategies. In this study, an efficient EV isolation method was developed by using polyethylene glycol/dextran aqueous two phase system (ATPS). This method provides high EV recovery efficiency (~70%) in a short time (~15 min). Consequently, it can significantly increase the diagnostic applicability of EVs.

| S-EPMC4536486 | biostudies-literature

Collagen Partition in Polymeric Aqueous Two-Phase Systems for Tissue Engineering.

Project description:Aqueous two-phase systems (ATPS) of polyethylene glycol (PEG) and dextran (DEX) are commonly used to partition proteins. Protein partition in ATPS is a complex phenomenon and depends on factors including molecular weight of polymers, and electrochemical and ionic properties of the phases. We studied the effect of polymer molecular weight on the partition of a natural protein, collagen, in several ATPS formulations made with non-ionic polymers polyethylene glycol (PEG) and dextran (DEX). We found that partitioning of collagen to an aqueous phase significantly increases when the molecular weight of the corresponding phase polymer decreases. Additionally, a large difference between the molecular weight of the phase-forming polymers was necessary to cause a significant uneven collagen distribution between the aqueous phases. We then employed one of the systems to create a three-dimensional breast cancer microtissue by entrapping a spheroid of breast cancer cells within the partitioned collagen. This convenient technique to generate 3D microtissues offers a convenient and promising approach for tissue engineering applications.

| S-EPMC6132203 | biostudies-literature

Isolation of High-Purity Extracellular Vesicles by Extracting Proteins Using Aqueous Two-Phase System.

Project description:We present a simple and rapid method to isolate extracellular vesicles (EVs) by using a polyethylene glycol/dextran aqueous two-phase system (ATPS). This system isolated more than ~75% of melanoma-derived EVs from a mixture of EVs and serum proteins. To increase the purity of EVs, a batch procedure was combined as additional steps to remove protein contaminants, and removed more than ~95% of the protein contaminants. We also performed RT-PCR and western blotting to verify the diagnostic applicability of the isolated EVs, and detected mRNA derived from melanoma cells and CD81 in isolated EVs.

| S-EPMC4475045 | biostudies-literature

Optimized Isolation of Extracellular Vesicles From Various Organic Sources Using Aqueous Two-Phase System.

Project description:From biomarkers to drug carriers, Extracellular Vesicles (EVs) are being used successfully in numerous applications. However, while the subject has been steadily rising in popularity, current methods of isolating EVs are lagging behind, incapable of isolating EVs at a high enough quantity or quality while also requiring expensive, specialized equipment. The "isolation problem" is one of the major obstacles in the field of EV research - and even more so for their potential, widespread use for clinical diagnosis and therapeutic applications. Aqueous Two-Phase Systems (ATPS) has been reported previously as a promising method for isolating EVs quickly and efficiently, and with little contaminants - however, this method has not seen widespread use. In this study, an ATPS-based isolation protocol is used to isolate small EVs from plant, cell culture, and parasite culture sources. Isolated EVs were characterized in surface markers, size, and morphological manner. Additionally, the capacity of ATPS-based EV isolation in removing different contaminants was shown by measuring protein, fatty acid, acid, and phenol red levels of the final isolate. In conclusion, we have shown that EVs originating from different biological sources can be isolated successfully in a cost-effective and user-friendly manner with the use of aqueous two-phase systems.

| S-EPMC6915764 | biostudies-literature

Aqueous Two-Phase Interfacial Assembly of COF Membranes for Water Desalination.

Project description:Aqueous two-phase system features with ultralow interfacial tension and thick interfacial region, affording unique confined space for membrane assembly. Here, for the first time, an aqueous two-phase interfacial assembly method is proposed to fabricate covalent organic framework (COF) membranes. The aqueous solution containing polyethylene glycol and dextran undergoes segregated phase separation into two water-rich phases. By respectively distributing aldehyde and amine monomers into two aqueous phases, a series of COF membranes are fabricated at water-water interface. The resultant membranes exhibit high NaCl rejection of 93.0-93.6% and water permeance reaching 1.7-3.7 L m-2 h-1 bar-1, superior to most water desalination membranes. Interestingly, the interfacial tension is found to have pronounced effect on membrane structures. The appropriate interfacial tension range (0.1-1.0 mN m-1) leads to the tight and intact COF membranes. Furthermore, the method is extended to the fabrication of other COF and metal-organic polymer membranes. This work is the first exploitation of fabricating membranes in all-aqueous system, confering a green and generic method for advanced membrane manufacturing.

| S-EPMC9646690 | biostudies-literature

Bioassay-Guided Isolation of Two Eudesmane Sesquiterpenes from Lindera strychnifolia Using Centrifugal Partition Chromatography.

Project description:In this study, a centrifugal partition chromatography (CPC) separation was applied to identify antioxidant-responsive element (ARE) induction molecules from the crude extract of Lindera strychnifolia roots. CPC was operated with a two-phase solvent system composed of n-hexane-methanol-water (10:8.5:1.5, v/v/v) in dual mode (descending to ascending), which provided a high recovery rate (>95.5%) with high resolution. Then, ARE induction activity of obtained CPC fractions was examined in ARE-transfected HepG2 cells according to the weight ratios of the obtained fractions. The fraction exhibiting ARE-inducing activity was further purified by preparative HPLC that led to isolation of two eudesmane type sesquiterpenes as active compounds. The chemical structures were elucidated as linderolide U (1) and a new sesquiterpene named as linderolide V (2) by spectroscopic data. Further bioactivity test demonstrated that compounds 1 and 2 enhanced ARE activity by 22.4-fold and 7.6-fold, respectively, at 100 μM concentration while 5 μM of sulforaphane induced ARE activity 24.8-fold compared to the control.

| S-EPMC8433645 | biostudies-literature

The dynamics of phase partition. A study of parameters affecting rat liver organelle partitioning in aqueous two-polymer phase systems.

Project description:Separation of subcellular organelles by two-phase partition is thought to reflect differential partition of the organelles between the two phases or between one of the phases and the interface. Studies by Fisher and colleagues [Fisher & Walter (1984) Biochim. Biophys. Acta 801, 106-110] suggest that cell separation by phase partition is a dynamic process in which the partition changes with time. This is mainly due to association of the cells with sedimenting droplets of one phase in the bulk of the other. Rat liver organelle partition was studied to determine whether the same dynamic behaviour is observed. Partition was clearly time-dependent during 24 h at unit gravity, and was also affected by altering the volume ratio of the two phases and the duration of phase mixing. These results indicate that, as with cells, the partition of organelles between phases is a dynamic process, and is consistent with the demonstration that organelles adhere to the phase droplet surfaces. Optimization of the volume ratio between phases may lead to significant processing economies. Organelle sedimentation in the upper phase was significantly faster than in the isoosmotic sucrose. Theoretical modelling of apparent organelle sizes indicates that aggregation occurs in the poly(ethylene glycol)-rich upper phase. This phenomenon is likely to limit the use of this technique in organelle separations unless means can be found to decrease aggregation.

| S-EPMC1146673 | biostudies-other

Linear Relationships between Partition Coefficients of Different Organic Compounds and Proteins in Aqueous Two-Phase Systems of Various Polymer and Ionic Compositions.

Project description:Analysis of the partition coefficients of small organic compounds and proteins in different aqueous two-phase systems under widely varied ionic compositions shows that logarithms of partition coefficients for any three compounds or proteins or two organic compounds and one protein are linearly interrelated, although for protein(s) there are ionic compositions when the linear fit does not hold. It is suggested that the established interrelationships are due to cooperativity of different types of solute-solvent interactions in aqueous media. This assumption is confirmed by analysis of distribution coefficients of various drugs in octanol-buffer systems with varied ionic compositions of the buffer. Analysis of the partition coefficients characterizing distribution of variety of drugs between blood and different tissues of rats in vivo reported in the literature showed that the above assumption is correct and enabled us to identify the tissues with the components of which the drug(s) may engage in presumably direct interactions. It shows that the suggested assumption is valid for even complex biological systems.

| S-EPMC7408505 | biostudies-literature

Polyelectrolyte Complex Hollow Fiber Membranes Prepared via Aqueous Phase Separation.

Project description:Hollow fiber (HF) membrane geometry is the preferred choice for most commercial membrane operations. Such fibers are conventionally prepared via the non-solvent-induced phase separation technique, which heavily relies on hazardous and reprotoxic organic solvents such as N-methyl pyrrolidone. A more sustainable alternative, i.e., aqueous phase separation (APS), was introduced recently that utilizes water as a solvent and non-solvent for the production of polymeric membranes. Herein, for the first time, we demonstrate the preparation of sustainable and functional HF membranes via the APS technique in a dry-jet wet spinning process. The dope solution comprising poly(sodium 4-styrenesulfonate) (PSS) and polyethyleneimine (PEI) at high pH along with an aqueous bore liquid is pushed through a single orifice spinneret into a low pH acetate buffer coagulation bath. Here, PEI becomes charged resulting in the formation of a polyelectrolyte complex with PSS. The compositions of the bore liquid and coagulation bath were systematically varied to study their effect on the structure and performance of the HF membranes. The microfiltration-type membranes (permeability ∼500 to 800 L·m-2·h-1·bar-1) with complete retention of emulsion droplets were obtained when the precipitation rate was slow. Increasing the concentration of the acetate buffer in the bath led to the increase in precipitation rate resulting in ultrafiltration-type membranes (permeability ∼12 to 15 L·m-2·h-1·bar-1) having molecular weight cut-offs in the range of ∼7.8-11.6 kDa. The research presented in this work confirms the versatility of APS and moves it another step closer to large-scale use.

| S-EPMC8845049 | biostudies-literature

Polyelectrolyte Complex Membranes via Salinity Change Induced Aqueous Phase Separation.

Project description:Polymeric membranes are used on very large scales for drinking water production and kidney dialysis, but they are nearly always prepared by using large quantities of unsustainable and toxic aprotic solvents. In this study, a water-based, sustainable, and simple way of making polymeric membranes is presented without the need for harmful solvents or extreme pH conditions. Membranes were prepared from water-insoluble polyelectrolyte complexes (PECs) via aqueous phase separation (APS). Strong polyelectrolytes (PEs), poly(sodium 4-styrenesulfonate) (PSS), and poly(diallyldimethylammonium chloride) (PDADMAC) were mixed in the presence of excess of salt, thereby preventing complexation. Immersing a thin film of this mixture into a low-salinity bath induces complexation and consequently the precipitation of a solid PEC-based membrane. This approach leads to asymmetric nanofiltration membranes, with thin dense top layers and porous, macrovoid-free support layers. While the PSS molecular weight and the total polymer concentrations of the casting mixture did not significantly affect the membrane structure, they did affect the film formation process, the resulting mechanical stability of the films, and the membrane separation properties. The salt concentration of the coagulation bath has a large effect on membrane structure and allows for control over the thickness of the separation layer. The nanofiltration membranes prepared by APS have a low molecular weight cutoff (<300 Da), a high MgSO4 retention (∼80%), and good stability even at high pressures (10 bar). PE complexation induced APS is a simple and sustainable way to prepare membranes where membrane structure and performance can be tuned with molecular weight, polymer concentration, and ionic strength.

| S-EPMC7359294 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data