Density-gradient sedimentation in silica sols. Anomalous shifts in the banding densities of polystyrene "latex" beads.
Ontology highlight
ABSTRACT:
SUBMITTER: Morganthaler JJ
PROVIDER: S-EPMC1172597 | biostudies-other | 1976 Feb
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Highly lipophilic nanocrystals (NCs) of cesium lead halides were successfully embedded in polystyrene (PS) particles by deliberately controlling the swelling of the PS particles in the mixtures of good and bad organic solvents. The resulting composite particles were readily transferred into water via simple stepwise solvent exchange, which yielded water-borne perovskite NC-based inks with outstanding structural and chemical stability in aqueous media. Minimal change in the photoluminescence (PL) of the NCs loaded in the PS particles was visible after 1 month of incubation of the composite particles in water in a broad pH range from 1 to 14, which could otherwise be hardly realized. Loading into the PS particles also made the NCs highly stable against polar organic solvents, such as ethanol, intense light irradiation, and heat. The NC PL intensity slightly changed after the composite particles were heated at 75°C and under irradiation of strong blue light (@365 nm) for 1 h. Furthermore, the PS matrices could effectively inhibit the exchange of halide anions between two differently sized perovskite NCs loaded therein, thereby offering a considerable technical advantage in the application of multiple perovskite NCs for multicolor display in the future.
| S-EPMC6206898 | biostudies-literature
Project description:Macrophages (M?) are well documented to produce IL-1? through various signaling pathways in response to small particles such as silica, asbestos and urea crystals, in the presence of lipopolysaccharide (LPS). However, it has not been clear to what extent particle size affects the response. To investigate this point, we stimulated bone marrow-derived macrophages (BMDM) with size-defined latex beads (LxB). Although both nano-sized (20 nm) and micro-sized (1,000 nm) LxB induced IL-1? production, only the nano-sized particles formed large intracellular vacuoles. In contrast, 100 nm LxB did not induce either of the responses. The same cellular responses were also observed in primary microglia cells. Although K(+) efflux and NLRP3 activation in BMDM were crucial in response to both 20 and 1,000 nm LxB, only IL-1? production by 20 nm LxB was sensitive to cathepsin B and P2X7, a receptor for ATP. The response by 1,000 nm LxB relied on a robust production of reactive oxygen species (ROS), since IL-1? production was remarkably reduced by ROS inhibitors such as diphenylene iodonium (DPI) and N-acetylcysteine (NAC). In contrast, IL-1? production by 20 nm LxB was augmented by NAC and in BMDM deficient in thioredoxin-binding protein-2 (TBP-2), a negative regulator of the ROS scavenger thioredoxin. These results suggest that the cells responded differently in their secretion of IL-1? depending on particle size, and that there is a range within which neither pathway works.
| S-EPMC3711474 | biostudies-literature
Project description:Mitochondria contain ribosomes (mitoribosomes) specialized in the synthesis of a handful of proteins essential for oxidative phosphorylation. Therefore, mitoribosome integrity and function are essential for the life of eukaryotic cells and lesions that affect them result in devastating human disorders. To broadly analyze the integrity and assembly state of mitoribosomes it is useful to start by determining the sedimentation profile of these structures by sucrose gradient centrifugation of mitochondrial extracts. During centrifugation, mitoribosome subunits, monosomes and polysomes, and potentially accumulated assembly intermediates will sediment through the gradient at different rates. Sedimentation will depend on the centrifugal force applied and the density and viscosity of the gradient. Importantly, it will also depend on the size, shape, and density of the mitoribosome particles present in the samples under study. Variations of this technique, often coupled with additional downstream approaches, have been used to analyze the process of mitoribosome biogenesis, the composition of assembly intermediates, or to monitor the interaction of extraribosomal proteins with individual mitoribosome subunits or monosomes.
| S-EPMC8281390 | biostudies-literature
Project description:We examine the suitability of metal-containing polystyrene beads for the calibration of a mass cytometer instrument, a single particle analyser based on an inductively coupled plasma ion source and a time of flight mass spectrometer. These metal-containing beads are also verified for their use as internal standards for this instrument. These beads were synthesized by multiple-stage dispersion polymerization with acrylic acid as a comonomer. Acrylic acid acts as a ligand to anchor the metal ions within the interior of the beads. Mass cytometry enabled the bead-by-bead measurement of the metal-content and determination of the metal-content distribution. Beads synthesized by dispersion polymerization that involved three stages were shown to have narrower bead-to-bead variation in their lanthanide content than beads synthesized by 2-stage dispersion polymerization. The beads exhibited insignificant release of their lanthanide content to aqueous solutions of different pHs over a period of six months. When mixed with KG1a or U937 cell lines, metal-containing polymer beads were shown not to affect the mass cytometry response to the metal content of element-tagged antibodies specifically attached to these cells.
| S-EPMC2852877 | biostudies-literature
Project description:The study of electrical activity in single cells and local circuits of excitable cells, such as neurons, requires an easy-to-use, high-throughput methodology that allows for the measurement of membrane potential. Investigating the electrical properties in specific subcompartments of neurons, or in a specific type of neurons, introduces additional complexity. An optical voltage-imaging technique that allows high spatial and temporal resolution could be an ideal solution. However, most valid voltage-imaging techniques are nonspecific. Those that are more site-directed require a lot of preliminary work and specific adaptations, among other drawbacks. Here, we explore a new method for membrane voltage imaging, based on Förster resonance energy transfer between fluorescent polystyrene (FPS) beads and dipicrylamine. Not only has it been shown that fluorescence intensity correlates with membrane potential, but more importantly, the membrane potential from individual particles can be detected. Among other advantages, FPS beads can be synthesized with surface functional groups and can be targeted to specific proteins by conjugation of recognition molecules. Therefore, in the presence of dipicrylamine, FPS beads represent single-particle detectors of membrane potential that can be localized to specific membrane compartments. This new and easily accessible platform for targeted optical voltage imaging can further elucidate the mechanisms of neuronal electrical activity.
| S-EPMC8651512 | biostudies-literature
Project description:Inverted colloidal crystal (ICC) hydrogel scaffolds have emerged as a new class of three-dimensional cell culture matrix that represents a unique opportunity to reproduce lymphoid tissue microenvironments. ICC geometry promotes the formation of stromal cell networks and their interaction with hematopoietic cells, a core cellular process in lymphoid tissues. When subdermally implanted, ICC hydrogel scaffolds direct unique foreign body responses to form a vascularized stromal tissue with prolonged attraction of hematopoietic cells, which together resemble lymphoid tissue microenvironments. While conceptually simple, fabrication of ICC hydrogel scaffold requires multiple steps and laborious handling of delicate materials. Here, we introduce a facile route for ICC hydrogel scaffold fabrication using expanded polystyrene (EPS) beads. EPS beads shrink and fuse in a tunable manner under pressurized thermal conditions, which serves as colloidal crystal templates for ICC scaffold fabrication. Inclusion of collagen in the precursor solution greatly simplified preparation of bioactive hydrogel scaffolds. The resultant EPS-templated bioactive ICC hydrogel scaffolds demonstrate characteristic features required for lymphoid tissue modeling in both in vitro and in vivo settings. We envision that the presented method will facilitate widespread implementation of ICC hydrogel scaffolds for lymphoid tissue engineering and other emerging applications. Impact statement Inverted colloidal crystal (ICC) hydrogel scaffolds have emerged as a new class of three-dimensional cell culture matrix that represents a unique opportunity for lymphoid tissue modeling and other emerging novel bioengineering applications. While conceptually simple, fabrication of the ICC hydrogel scaffold requires multiple steps and laborious handling of delicate materials with highly toxic chemicals. The presented method for ICC hydrogel scaffold fabrication using expanded polystyrene (EPS) beads is simple, cost-effective, and involves less toxic chemicals than conventional methods, while retaining comparable biological significance. We envision that EPS bead-based hydrogel scaffold fabrication will greatly facilitate the widespread implementation of ICC hydrogel scaffolds and their practical applications.
| S-EPMC7099427 | biostudies-literature
Project description:Human noroviruses (HuNoV) are among the main causes of acute gastroenteritis worldwide. Frozen raspberries have been linked to several HuNoV food-related outbreaks. However, the extraction of HuNoV RNA from frozen raspberries remains challenging. Recovery yields are low, and real-time quantitative reverse transcriptase PCR (RT-qPCR) inhibitors limit the sensitivity of the detection methodologies. A new approach using fine magnetic silica beads was developed for the extraction of HuNoV spiked on frozen raspberries. Relatively low recovery yields were observed with both the magnetic silica bead and the reference ISO 15216-1:2017 methods. High RT-qPCR inhibition was observed with the ISO 15216-1:2017 recommended amplification kit but could be reduced by using an alternative kit. Reducing RT-qPCR inhibition is important to limit the number of inconclusive HuNoV assays thus increasing the capacity to assess the HuNoV prevalence in frozen raspberries.
| S-EPMC8116234 | biostudies-literature
Project description:Accurate comparison of flow cytometric data requires an understanding of how the cytometric fingerprint of a sample may vary from instrument to instrument. Key sources of variability include the number, wavelengths, and power of excitation lasers; the number and types of emission detectors; sample-handling systems and options; and whether fixed or dynamic detector voltages are used. To explore this variability, suspensions of three sizes (0.2, 0.5, and 0.8 μm-diameter) of solid, fluorescent, polystyrene beads were prepared. The suspensions were then run on four flow cytometers, keeping instrument settings as consistent as possible. The results are displayed graphically in Figure 3 of the article "Flow cytometry applications in water treatment, distribution, and reuse: A review" (DOI: 10.1016/j.watres.2018.12.016) [1]. This dataset contains the complete FCS files generated from the experimental comparison. In the development and application of flow cytometry to water quality assessment, we recommend data sharing in this manner to enable comprehensive reporting, meaningful comparison of results obtained using different cytometer models, enhanced exploration of data along multiple parameters, and use of acquired data for computational advancements in the field.
| S-EPMC6451693 | biostudies-literature
Project description:BACKGROUND:DNA promoter methylation is a signature for the silencing of tumor suppressor genes. Most widely used methods to detect DNA methylation involve 3 separate, independent processes: DNA extraction, bisulfite conversion, and methylation detection via a PCR method, such as methylation-specific PCR (MSP). This method includes many disconnected steps with associated losses of material, potentially reducing the analytical sensitivity required for analysis of challenging clinical samples. METHODS:Methylation on beads (MOB) is a new technique that integrates DNA extraction, bisulfite conversion, and PCR in a single tube via the use of silica superparamagnetic beads (SSBs) as a common DNA carrier for facilitating cell debris removal and buffer exchange throughout the entire process. In addition, PCR buffer is used to directly elute bisulfite-treated DNA from SSBs for subsequent target amplifications. The diagnostic sensitivity of MOB was evaluated by methylation analysis of the CDKN2A [cyclin-dependent kinase inhibitor 2A (melanoma, p16, inhibits CDK4); also known as p16(INK4a)] promoter in serum DNA of lung cancer patients and compared with that of conventional methods. RESULTS:Methylation analysis consisting of DNA extraction followed by bisulfite conversion and MSP was successfully carried out within 9 h in a single tube. The median pre-PCR DNA yield was 6.61-fold higher with the MOB technique than with conventional techniques. Furthermore, MOB increased the diagnostic sensitivity in our analysis of the CDKN2A promoter in patient serum by successfully detecting methylation in 74% of cancer patients, vs the 45% detection rate obtained with conventional techniques. CONCLUSIONS:The MOB technique successfully combined 3 processes into a single tube, thereby allowing ease in handling and an increased detection throughput. The increased pre-PCR yield in MOB allowed efficient, diagnostically sensitive methylation detection.
| S-EPMC3000409 | biostudies-literature
Project description:The compatibility and coating ratio between flame retardant materials and expanded polystyrene (EPS) foam is a major impediment to achieving satisfactory flame retardant performance. In this study, we prepared a water-based intumescent flame retardant system and methylene diphenyl diisocyanate (MDI)-coated expandable polystyrene microspheres by a simple coating approach. We investigated the compatibility, coating ratio, and fire performance of EPS- and MDI-coated EPS foam using a water-based intumescent flame retardant system. The microscopic study revealed that the water-based intumescent flame retardant materials were successfully incorporated with and without MDI-coated EPS microspheres. The cone calorimeter tests (CCTs) of the MDI-coated EPS containing water-based intumescent flame retardant materials exhibited better flame retardant performance with a lower total heat release (THR) 7.3 MJ/m2, peak heat release rate (PHRR) 57.6 kW/m2, fire growth rate (FIGRA) 2027.067 W/m2.s, and total smoke production (TSP) 0.133 m2. Our results demonstrated that the MDI-coated EPS containing water-based intumescent flame retardant materials achieved flame retarding properties as per fire safety standards.
| S-EPMC8398555 | biostudies-literature