Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

CFD simulation of an internal spin-filter: evidence of lateral migration and exchange flow through the mesh.

ABSTRACT: In the present work Computational Fluid Dynamics (CFD) was used to study the flow field and particle dynamics in an internal spin-filter (SF) bioreactor system. Evidence of a radial exchange flow through the filter mesh was detected, with a magnitude up to 130-fold higher than the perfusion flow, thus significantly contributing to radial drag. The exchange flow magnitude was significantly influenced by the filter rotation rate, but not by the perfusion flow, within the ranges evaluated. Previous reports had only given indirect evidences of this exchange flow phenomenon in spin-filters, but the current simulations were able to quantify and explain it. Flow pattern inside the spin-filter bioreactor resembled a typical Taylor-Couette flow, with vortices being formed in the annular gap and eventually penetrating the internal volume of the filter, thus being the probable reason for the significant exchange flow observed. The simulations also showed that cells become depleted in the vicinity of the mesh due to lateral particle migration. Cell concentration near the filter was approximately 50% of the bulk concentration, explaining why cell separation achieved in SFs is not solely due to size exclusion. The results presented indicate the power of CFD techniques to study and better understand spin-filter systems, aiming at the establishment of effective design, operation and scale-up criteria.

SUBMITTER: Figueredo-Cardero A

PROVIDER: S-EPMC2795145 | biostudies-other | 2009 Nov

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

CFD convective flow simulation of the varying properties of CO2-H2O mixtures in geothermal systems.

Project description:Numerical simulation of a geothermal reservoir, modelled as a bottom-heated square box, filled with water-CO2 mixture is presented in this work. Furthermore, results for two limiting cases of a reservoir filled with either pure water or CO2 are presented. Effects of different parameters including CO2 concentration as well as reservoir pressure and temperature on the overall performance of the system are investigated. It has been noted that, with a fixed reservoir pressure and temperature, any increase in CO2 concentration leads to better performance, that is, stronger convection and higher heat transfer rates. With a fixed CO2 concentration, however, the reservoir pressure and temperature can significantly affect the overall heat transfer and flow rate from the reservoir. Details of such variations are documented and discussed in the present paper.

| S-EPMC4386697 | biostudies-other

CFD simulation data of a pico-hydro turbine.

Project description:This paper presents the data obtained from the CFD simulation of a pico-hydraulic turbine designed for electric power generation in residential units. Pico-hydro turbine systems are a booming option that seeks to take advantage of small waterfalls and/or streams to generate electricity in a clean way. The data collection process was carried out through simulations developed to a model created in SolidWorks, with the help of the ANSYS CFX software in which the solver configuration was adjusted to the parameters suggested by the manufacturer's manuals (ANSYS) and the boundary conditions were determined based on the current regulatory standards for drinking water systems for Colombia. These boundary conditions influence the operation of the turbine, which is why three runs were carried out corresponding to three points of operation and to obtain the output pressure, the fall of the turbine and the hydraulic power that the device would utilise. The data, acquired in a strict manner, offers potential support for further research in the area and the possible manufacture of prototypes. It also encourages the development of simulations and laboratory tests of this type of device in which geometric factors or operating conditions could be modified.

| S-EPMC7721606 | biostudies-literature

Lateral migration of electrospun hydrogel nanofilaments in an oscillatory flow.

Project description:The recent progress in bioengineering has created great interest in the dynamics and manipulation of long, deformable macromolecules interacting with fluid flow. We report experimental data on the cross-flow migration, bending, and buckling of extremely deformable hydrogel nanofilaments conveyed by an oscillatory flow into a microchannel. The changes in migration velocity and filament orientation are related to the flow velocity and the filament's initial position, deformation, and length. The observed migration dynamics of hydrogel filaments qualitatively confirms the validity of the previously developed worm-like bead-chain hydrodynamic model. The experimental data collected may help to verify the role of hydrodynamic interactions in molecular simulations of long molecular chains dynamics.

| S-EPMC5687761 | biostudies-literature

High Xe density, high photon flux, stopped-flow spin-exchange optical pumping: Simulations versus experiments.

Project description:Spin-exchange optical pumping (SEOP) can enhance the NMR sensitivity of noble gases by up to five orders of magnitude at Tesla-strength magnetic fields. SEOP-generated hyperpolarised (HP) 129Xe is a promising contrast agent for lung imaging but an ongoing barrier to widespread clinical usage has been economical production of sufficient quantities with high 129Xe polarisation. Here, the 'standard model' of SEOP, which was previously used in the optimisation of continuous-flow 129Xe polarisers, is modified for validation against two Xe-rich stopped-flow SEOP datasets. We use this model to examine ways to increase HP Xe production efficiency in stopped-flow 129Xe polarisers and provide further insight into the underlying physics of Xe-rich stopped-flow SEOP at high laser fluxes.

| S-EPMC7436892 | biostudies-literature

CFD and experimental data of closed-loop wind tunnel flow.

Project description:The data presented in this article were the basis for the study reported in the research articles entitled 'A validated design methodology for a closed loop subsonic wind tunnel' (Calautit et al., 2014) [1], which presented a systematic investigation into the design, simulation and analysis of flow parameters in a wind tunnel using Computational Fluid Dynamics (CFD). The authors evaluated the accuracy of replicating the flow characteristics for which the wind tunnel was designed using numerical simulation. Here, we detail the numerical and experimental set-up for the analysis of the closed-loop subsonic wind tunnel with an empty test section.

| S-EPMC4773566 | biostudies-literature

CFD simulation study on wind load of perforated traffic sign board.

Project description:Traffic sign boards are often blown away by strong winds, seriously endangering the safety of vehicles and pedestrians. To increase their resistance to strong winds, sign boards are perforated. Using computational fluid dynamics simulations, the wind load resistance of traffic signs with holes was optimised. By comparing the solutions to different turbulence models with empirical results, it was found that the simulation results of the re-normalisation group (RNG) model have the smallest error. Therefore, the RNG model is used to simulate the wind load of traffic sign boards with different perforation diameters and different hole spacings under different wind speeds. By analysing the wind pressure distribution on the surface of the perforated traffic sign board, the perforation scheme for different regions of the sign board under different wind loads was obtained. The results show that reasonable perforation diameters and hole spacings can reduce the wind load and improve the wind load resistance of sign boards. This study provides decision-makers with useful information for installing traffic signs in areas affected with strong winds, thereby improving the wind resistance of traffic signs and ensuring traffic safety.

| S-EPMC7580890 | biostudies-literature

Efficient spin filter using multi-terminal quantum dot with spin-orbit interaction.

Project description:We propose a multi-terminal spin filter using a quantum dot with spin-orbit interaction. First, we formulate the spin Hall effect (SHE) in a quantum dot connected to three leads. We show that the SHE is significantly enhanced by the resonant tunneling if the level spacing in the quantum dot is smaller than the level broadening. We stress that the SHE is tunable by changing the tunnel coupling to the third lead. Next, we perform a numerical simulation for a multi-terminal spin filter using a quantum dot fabricated on semiconductor heterostructures. The spin filter shows an efficiency of more than 50% when the conditions for the enhanced SHE are satisfied.PACS numbers: 72.25.Dc,71.70.Ej,73.63.Kv,85.75.-d.

| S-EPMC3211854 | biostudies-literature

Large-scale subject-specific cerebral arterial tree modeling using automated parametric mesh generation for blood flow simulation.

Project description:In this paper, we present a novel technique for automatic parametric mesh generation of subject-specific cerebral arterial trees. This technique generates high-quality and anatomically accurate computational meshes for fast blood flow simulations extending the scope of 3D vascular modeling to a large portion of cerebral arterial trees. For this purpose, a parametric meshing procedure was developed to automatically decompose the vascular skeleton, extract geometric features and generate hexahedral meshes using a body-fitted coordinate system that optimally follows the vascular network topology. To validate the anatomical accuracy of the reconstructed vasculature, we performed statistical analysis to quantify the alignment between parametric meshes and raw vascular images using receiver operating characteristic curve. Geometric accuracy evaluation showed an agreement with area under the curves value of 0.87 between the constructed mesh and raw MRA data sets. Parametric meshing yielded on-average, 36.6% and 21.7% orthogonal and equiangular skew quality improvement over the unstructured tetrahedral meshes. The parametric meshing and processing pipeline constitutes an automated technique to reconstruct and simulate blood flow throughout a large portion of the cerebral arterial tree down to the level of pial vessels. This study is the first step towards fast large-scale subject-specific hemodynamic analysis for clinical applications.

| S-EPMC5696053 | biostudies-other

Defective Neutrophil Transendothelial Migration and Lateral Motility in ARPC1B Deficiency Under Flow Conditions.

Project description:The actin-related protein (ARP) 2/3 complex, essential for organizing and nucleating branched actin filaments, is required for several cellular immune processes, including cell migration and granule exocytosis. Recently, genetic defects in ARPC1B, a subunit of this complex, were reported. Mutations in ARPC1B result in defective ARP2/3-dependent actin filament branching, leading to a combined immunodeficiency with severe inflammation. In vitro, neutrophils of these patients showed defects in actin polymerization and chemotaxis, whereas adhesion was not altered under static conditions. Here we show that under physiological flow conditions human ARPC1B-deficient neutrophils were able to transmigrate through TNF-α-pre-activated endothelial cells with a decreased efficiency and, once transmigrated, showed definite impairment in subendothelial crawling. Furthermore, severe locomotion and migration defects were observed in a 3D collagen matrix and a perfusable vessel-on-a-chip model. These data illustrate that neutrophils employ ARP2/3-independent steps of adhesion strengthening for transmigration but rely on ARP2/3-dependent modes of migration in a more complex multidimensional environment.

| S-EPMC8202084 | biostudies-literature

CAMDLES: CFD-DEM Simulation of Microbial Communities in Spaceflight and Artificial Microgravity.

Project description:We present CAMDLES (CFD-DEM Artificial Microgravity Developments for Living Ecosystem Simulation), an extension of CFDEM®Coupling to model biological flows, growth, and mass transfer in artificial microgravity devices. For microbes that accompany humans into space, microgravity-induced alterations in the fluid environment are likely to be a major factor in the microbial experience of spaceflight. Computational modeling is needed to investigate how well ground-based microgravity simulation methods replicate that experience. CAMDLES incorporates agent-based modeling to study inter-species metabolite transport within microbial communities in rotating wall vessel bioreactors (RWVs). Preexisting CFD modeling of RWVs has not yet incorporated growth; CAMDLES employs the simultaneous modeling of biological, chemical, and mechanical processes in a micro-scale rotating reference frame environment. Simulation mass transfer calculations were correlated with Monod dynamic parameters to predict relative growth rates between artificial microgravity, spaceflight microgravity, and 1 g conditions. By simulating a microbial model community of metabolically cooperative strains of Escherichia coli and Salmonella enterica, we found that the greatest difference between microgravity and an RWV or 1 g gravity was when species colocalized in dense aggregates. We also investigated the influence of other features of the system on growth, such as spatial distribution, product yields, and diffusivity. Our simulation provides a basis for future laboratory experiments using this community for investigation in artificial microgravity and spaceflight microgravity. More broadly, our development of these models creates a framework for novel hypothesis generation and design of biological experiments with RWVs, coupling the effects of RWV size, rotation rate, and mass transport directly to bacterial growth in microbial communities.

| S-EPMC9144607 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data