Rapid fabrication of a microdevice with concave microwells and its application in embryoid body formation.
Ontology highlight
ABSTRACT:
SUBMITTER: Xu Y
PROVIDER: S-EPMC3365352 | biostudies-other | 2012 Mar
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Various scalable three-dimensional culture systems for regenerative medicine using human induced pluripotent stem cells (hiPSCs) have been developed to date. However, stable production of hiPSCs with homogeneous qualities still remains a challenge. Here, we describe a novel and simple embryoid body (EB) formation system using unique microfabricated culture vessels. Furthermore, this culture system is useful for high throughput EB formation and rapid generation of differentiated cells such as neural stem cells (NSCs) from hiPSCs. The period of NSC differentiation was significantly shortened under high EB density culture conditions. Simultaneous mass production of a pure population of NSCs was possible within 4 days. These results indicate that the novel culture system might not only become a unique tool to obtain new insights into developmental biology based on human stem cells, but also provide an important tractable platform for efficient and stable production of NSCs for clinical applications.
| S-EPMC4978968 | biostudies-literature
Project description:Long-term culture and monitoring of individual multicellular spheroids and embryoid bodies (EBs) remains a challenge for in vitro cell propagation. Here, we used a continuous 3D projection printing approach - with an important modification of nonlinear exposure - to generate concave hydrogel microstructures that permit spheroid growth and long-term maintenance, without the need for spheroid transfer. Breast cancer spheroids grown to 10 d in the concave structures showed hypoxic cores and signs of necrosis using immunofluorescent and histochemical staining, key features of the tumor microenvironment in vivo. EBs consisting of induced pluripotent stem cells (iPSCs) grown on the hydrogels demonstrated narrow size distribution and undifferentiated markers at 3 d, followed by signs of differentiation by the presence of cavities and staining of the three germ layers at 10 d. These findings demonstrate a new method for long-term (e.g. beyond spheroid formation at day 2, and with media exchange) 3D cell culture that should be able to assist in cancer spheroid studies as well as embryogenesis and patient-derived disease modeling with iPSC EBs.
| S-EPMC4439309 | biostudies-literature
Project description:The progressive loss of endogenous regenerative capacity that accompanies mammalian aging has been attributed at least in part to alterations in the extracellular matrix (ECM) composition of adult tissues. Thus, creation of a more regenerative microenvironment, analogous to embryonic morphogenesis, may be achieved via pluripotent embryonic stem cell (ESC) differentiation and derivation of devitalized materials as an alternative to decellularized adult tissues, such as demineralized bone matrix (DBM). Transplantation of devitalized ESC materials represents a novel approach to promote functional tissue regeneration and reduce the inherent batch-to-batch variability of allograft-derived materials. In this study, the osteoinductivity of embryoid body-derived material (EBM) was compared to DBM in a standard in vivo ectopic osteoinduction assay in nude mice. EBM derived from EBs differentiated for 10 days with osteogenic media (+?-glycerophosphate) exhibited similar osteoinductivity to active DBM (osteoinduction score?=?2.50?±?0.27 vs. 2.75?±?0.16) based on histological scoring, and exceeded inactive DBM (1.13?±?0.13, p?<?0.005). Moreover, EBM stimulated formation of new bone, ossicles, and marrow spaces, similar to active DBM. The potent osteoinductivity of EBM demonstrates that morphogenic factors expressed by ESCs undergoing osteogenic differentiation yield a novel devitalized material capable of stimulating de novo bone formation in vivo.
| S-EPMC4426716 | biostudies-literature
Project description:One approach to cell differentiation is to use the natural capacity of pluripotent stem cells to form three germ layers via embryoid bodies (EB). However, unification of this process during in vitro culture remains challenging and many microenvironmental factors including the number of cells in the culture can influence differentiation patterns. The number of cells serves a crucial role as it determines access to nutrients, the distribution of oxygen concentration and cellular interactions, all of which influence the fate of the differentiated cells. The influence of EBs derived from human pluripotent cells on the chondrogenic potential of such cells is not well understood. For this reason, the present study sought to determine the effect of varying amounts of cells on the properties of EBs derived from human embryonic stem cells (BG01V cell line). In the present study, 500?2,000 cells per well were cultivated from 5 to 15 days in suspension cell culture. Expression of pluripotency genes and germ layer markers were evaluated in order to determine the EBs with the greatest and least mesodermal properties. Genes associated with pluripotency and chondrogenesis were also evaluated to assess the influence of suspension culture duration and EB size on chondrogenic differentiation. Immunofluorescence staining for pluripotent and chondrocyte?associated proteins confirmed successful differentiation into chondrocyte?like cells. Alcian blue staining confirmed deposition of proteoglycans. These results suggested that EBs formed in 500?cell wells possess the highest mesodermal and prochondrogenic properties. Differentiation of EBs into chondrocytes on day 5 in 500?cell wells was more efficient than in that observed in larger and older EBs.
| S-EPMC6102628 | biostudies-literature
Project description:The conventional hanging drop technique is the most widely used method for embryoid body (EB) formation. However, this method is labor intensive and limited by the difficulty in exchanging the medium. Here, we report a microfluidic chip-based approach for high-throughput formation of EBs. The device consists of microfluidic channels with 6 × 12 opening wells in PDMS supported by a glass substrate. The PDMS channels were fabricated by replicating polydimethyl-siloxane (PDMS) from SU-8 mold. The droplet formation in the chip was tested with different hydrostatic pressures to obtain optimal operation pressures for the wells with 1000 μm diameter openings. The droplets formed at the opening wells were used to culture mouse embryonic stem cells which could subsequently developed into EBs in the hanging droplets. This device also allows for medium exchange of the hanging droplets making it possible to perform immunochemistry staining and characterize EBs on chip.
| S-EPMC6272923 | biostudies-literature
Project description:Within the last decade, a wide variety of protocols have emerged for the generation of retinal organoids. A subset of studies have compared protocols based on stem cell source, the physical features of the microenvironment, and both internal and external signals, all features that influence embryoid body and retinal organoid formation. Most of these comparisons have focused on the effect of signaling pathways on retinal organoid development. In this study, our aim is to understand whether starting cell conditions, specifically those involved in embryoid body formation, affect the development of retinal organoids in terms of differentiation capacity and reproducibility. To investigate this, we used the popular 3D floating culture method to generate retinal organoids from stem cells. This method starts with either small clumps of stem cells generated from larger clones (clumps protocol, CP) or with an aggregation of single cells (single cells protocol, SCP). Using histological analysis and gene-expression comparison, we found a retention of the pluripotency capacity on embryoid bodies generated through the SCP compared to the CP. Nonetheless, these early developmental differences seem not to impact the final retinal organoid formation, suggesting a potential compensatory mechanism during the neurosphere stage. This study not only facilitates an in-depth exploration of embryoid body development but also provides valuable insights for the selection of the most suitable protocol in order to study retinal development and to model inherited retinal disorders in vitro.
| S-EPMC10855324 | biostudies-literature
Project description:We report a technology to form human embryoid bodies (hEBs) from singularized human embryonic stem cells (hESCs) without the use of the p160 rho-associated coiled-coil kinase inhibitor (ROCKi) or centrifugation (spin). hEB formation was tested under four conditions: +ROCKi/+spin, +ROCKi/-spin, -ROCKi/+spin, and -ROCKi/-spin. Cell suspensions of BG01V/hOG and H9 hESC lines were pipetted into non-adherent hydrogel substrates containing defined microwell arrays. hEBs of consistent size and spherical geometry can be formed in each of the four conditions, including the -ROCKi/-spin condition. The hEBs formed under the -ROCKi/-spin condition differentiated to develop the three embryonic germ layers and tissues derived from each of the germ layers. This simplified hEB production technique offers homogeneity in hEB size and shape to support synchronous differentiation, elimination of the ROCKi xeno-factor and rate-limiting centrifugation treatment, and low-cost scalability, which will directly support automated, large-scale production of hEBs and hESC-derived cells needed for clinical, research, or therapeutic applications.
| S-EPMC4217711 | biostudies-literature
Project description:The classical cell sorting experiments undertaken by Townes and Holtfreter described the intrinsic propensity of dissociated embryonic cells to self-organize and reconcile into their original embryonic germ layers with characteristic histotypic positioning. Steinberg presented the differential adhesion hypothesis to explain these patterning phenomena. Here, we have reappraised these issues by implementing embryoid bodies to model the patterning of epiblast and primitive endoderm layers. We have used combinations of embryonic stem (ES) cells and their derivatives differentiated by retinoic acid treatment to model epiblast and endoderm cells, and wild-type or E-cadherin null cells to represent strongly or weakly adherent cells, respectively. One cell type was fluorescently labeled and reconstituted with another heterotypically to generate chimeric embryoid bodies, and cell sorting was tracked by time-lapse video microscopy and confirmed by immunostaining. When undifferentiated wild-type and E-cadherin null ES cells were mixed, the resulting cell aggregates consisted of a core of wild-type cells surrounded by loosely associated E-cadherin null cells, consistent with the differential adhesion hypothesis. However, when mixed with undifferentiated ES cells, the differentiated primitive endoderm-like cells sorted to the surface to form a primitive endoderm layer irrespective of cell-adhesive strength, contradicting the differential adhesion hypothesis. We propose that the primitive endoderm cells reach the surface by random movement, and subsequently the cells generate an apical/basal polarity that prevents reentry. Thus, the ability to generate epithelial polarity, rather than adhesive affinity, determines the surface positioning of the primitive endoderm cells.
| S-EPMC2755612 | biostudies-literature
Project description:Microbial resistance to currently available antibiotics poses a great threat in the global fight against infections. An important step in determining bacterial antibiotic resistance can be selective DNA sequence capture and fluorescence labeling. In this paper, we demonstrate the fabrication of simple, robust, inexpensive microfluidic devices for DNA capture and fluorescence detection of a model antibiotic resistance gene sequence. We laser micromachined polymethyl methacrylate microchannels and enclosed them using pressure-sensitive adhesive tapes. We then formed porous polymer monoliths with DNA capture probes in these microchannels and used them for sequence-specific capture, fluorescent labeling, and laser-induced fluorescence detection of picomolar (pM) concentrations of synthetic and plasmid antibiotic resistance gene targets. The relative fluorescence for the elution peaks increased with loaded target DNA concentration. We observed higher fluorescence signal and percent recovery for synthetic target DNA compared to plasmid DNA at the same loaded target concentration. A non-target gene was used for control experiments and produced < 3% capture relative to the same concentration of target. The full analysis process including device fabrication was completed in less than 90 min with a limit of detection of 30 pM. The simplicity of device fabrication and good DNA capture selectivity demonstrated herein have potential for application with processes for bacterial plasmid DNA extraction and single-particle counting to facilitate determination of antibiotic susceptibility. Graphical abstract.
| S-EPMC7855688 | biostudies-literature
Project description:Embryonic stem cells (ESCs) have the ability to form aggregates, which are called embryoid bodies (EBs). EBs mimic early embryonic development and are commonly produced for cardiomyogenesis. Here, we describe a method of EB formation in hydrodynamic conditions using a slow-turning lateral vessel (STLV) bioreactor and the subsequent differentiation of EBs into cardiomyocytes. EBs formed in the STLV were compared with conventional techniques, such as hanging drop (HD) or static suspension cell culture (SSC), for homogeneity of EB size, shape, proliferation, apoptosis, and in vitro cardiac differentiation. After 3 days of culture, a four-fold improvement in the yield of EB formation/mL, a six-fold enhancement in total yield of EB/mL, and a nearly 10-fold reduction of cells that failed to incorporate into EBs were achieved in STLV versus SSC. During cardiac differentiation, a 1.5- to 4.2-fold increase in the area of cardiac troponin T (cTnT) per single EB in STLV versus SSC and HD was achieved. These results demonstrate that the STLV method improves the quality and quantity of ES cells to form EBs and enhances the efficiency of cardiac differentiation. We have demonstrated that the mechanical method of cell differentiation creates different microenvironments for the cells and thus influences their lineage commitments, even when genetic origin and the culture medium are the same. Ascorbic acid (ASC) improved further cardiac commitment in differentiation assays. Hence, this culture system is suitable for the production of large numbers of cells for clinical cell replacement therapies and industrial drug testing applications.
| S-EPMC3787388 | biostudies-literature