Polymer stretch in two-phase microfluidics: Effect of wall wettability.
Ontology highlight
ABSTRACT:
SUBMITTER: Hu SW
PROVIDER: S-EPMC3386991 | biostudies-other | 2012 Jun
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Controlling droplet dynamics via wettability or movement at the nanoscale is a significant goal of nanotechnology. By performing molecular dynamics simulations, we study the wettability and spontaneous coalescence of Cu droplets confined in two carbon walls. We first focus on one drop in the two-wall confinement to reveal confinement effects on wettability and detaching behavior of metallic droplets. Results show that Cu droplets finally display three states: non-detachment, semi-detachment and full detachment, depending on the height of confined space. The contact angle ranges from 125° to 177°, and the contact area radius ranges from 12 to ~80 Å. The moving time of the detached droplet in the full detachment state shows a linear relationship with the height of confined space. Further investigations into two drops subjected to confinement show that the droplets, initially distant from each other, spontaneously coalesce into a larger droplet by detachment. The coalescing time and final position of the merged droplet are precisely controlled by tailoring surface structures of the carbon walls, the height of the confined space or a combination of these approaches. These findings could provide an effective method to control the droplet dynamics by confinement.
| S-EPMC4602311 | biostudies-literature
Project description:Multiphase flow in porous media is important in many natural and industrial processes, including geologic CO2 sequestration, enhanced oil recovery, and water infiltration into soil. Although it is well known that the wetting properties of porous media can vary drastically depending on the type of media and pore fluids, the effect of wettability on multiphase flow continues to challenge our microscopic and macroscopic descriptions. Here, we study the impact of wettability on viscously unfavorable fluid-fluid displacement in disordered media by means of high-resolution imaging in microfluidic flow cells patterned with vertical posts. By systematically varying the wettability of the flow cell over a wide range of contact angles, we find that increasing the substrate's affinity to the invading fluid results in more efficient displacement of the defending fluid up to a critical wetting transition, beyond which the trend is reversed. We identify the pore-scale mechanisms-cooperative pore filling (increasing displacement efficiency) and corner flow (decreasing displacement efficiency)-responsible for this macroscale behavior, and show that they rely on the inherent 3D nature of interfacial flows, even in quasi-2D media. Our results demonstrate the powerful control of wettability on multiphase flow in porous media, and show that the markedly different invasion protocols that emerge-from pore filling to postbridging-are determined by physical mechanisms that are missing from current pore-scale and continuum-scale descriptions.
| S-EPMC5027428 | biostudies-literature
Project description:We present here a detailed study of the wettability of surfaces nanostructured with amorphous and crystalline nanoparticles (NPs) derived from the phase-change material Ge2Sb2Te5 (GST). Particular attention was devoted to the effect of airborne surface hydrocarbons on surface wetting. Our analysis illustrates that a reversible hydrophilic-hydrophobic wettability switch is revealed by combined ultraviolet-ozone (UV-O3) treatments and exposure to hydrocarbon atmospheres. Indeed, the as-prepared surfaces exhibited a hydrophilic state after thermal annealing or UV-O3 treatment which can partially remove hydrocarbon contaminants, while a hydrophobic state was realized after exposure to hydrocarbon atmosphere. Using high-angle annular dark-field scanning transmission electron microscopy for the specially designed GST NP decorated graphene substrates, a network of hydrocarbon connecting GST NPs was observed. Our findings indicate that airborne hydrocarbons can significantly enhance the hydrophobicity of nanostructured surfaces. Finally, the experiments reveal that previously defined hydrophilic materials can be used for the design of hydrophobic surfaces even if the meniscus is highly adhered to a solid surface, which is in agreement with our qualitative model involving the contribution of the nanomeniscus formed between the substrate and a decorating NP.
| S-EPMC6887839 | biostudies-literature
Project description:Aqueous two-phase system (ATPS) droplet generation has significant potential in biological and medical applications because of its excellent biocompatibility. However, the ultralow interfacial tension of ATPS makes droplet generation extremely challenging when compared with the conventional water-in-oil (W/O) system. In this paper, we passively produced ATPS droplets with a wide range of droplet size and high production rate without the involvement of an oil phase and external forces. For the first time, we reported important information of the flow rate and capillary (Ca) number for passive, oil-free ATPS droplet generation. It was found that the range of Ca numbers of the continuous phase under the jetting flow regime is 0.3-1.7, as compared to less than 0.1 in the W/O system, indicating the ultralow interfacial tension in ATPS. In addition, we successfully generated ATPS droplets with a radius as small as 7 μm at the maximum frequency up to 300 Hz, which has not been achieved in previous studies. The size and generation frequency of ATPS droplets can be controlled independently by adjusting the inlet pressures and corresponding flow rates. We found that the droplet size is correlated with the pressure and flow rate ratios with the power-law exponents of 0.8 and 0.2, respectively.
| S-EPMC6645416 | biostudies-literature
Project description:The microstructure design of multiblock copolymers is essential for achieving desired interfacial properties in submerged applications. Two major design factors are the chemical composition and polymer topology. Despite a clear relationship between chemical composition and wetting, the effect of polymer topology (i.e., linear vs cross-linked polymers) is not very clear. Thus, in this study, we shed light on the molecular origins of polymer topology on the wetting behavior. To this end, we synthesized linear and three-dimensional (3D) cross-linked network topologies of poly(ethylene glycol) (PEG)-modified polycarbonate polyurethanes with the same amount of hydrophilic PEG groups on the surface (confirmed by X-ray photoelectron spectroscopy (XPS)) and studied the wetting mechanisms through water contact angle (WCA), atomic force microscopy (AFM), and molecular dynamics (MD) simulations. The linear topology exhibited superhydrophilic behavior, while the WCA of the cross-linked polymer was around 50°. AFM analysis (performed on dry and wet samples) suggests that PEG migration toward the interface is the dominant factor. MD simulations confirm the AFM results and unravel the mechanisms: the higher flexibility of PEG in linear topology results in a greater PEG migration to the interface and formation of a thicker interfacial layer (i.e., twice as thick as the cross-linked polymers). Accordingly, water diffusion into the interfacial layer was greater in the case of the linear polymer, leading to better screening of the underneath hydrophobic (polycarbonate) segments.
| S-EPMC10786039 | biostudies-literature
Project description:Sorting of distinct (n, m) chirality species of single-wall carbon nanotubes (SWCNTs) is essential for progress in technical applications in the field of electronic and optic devices. The purpose of this study is to investigate the isolation of single-wall carbon nanotubes based on diameters/chirality in a polymer-salt (polyethylene glycol and sodium citrate) aqueous two-phase system (ATPS) a substitute for common polymer-polymer (polyethylene glycol and dextran) system. The ATPS based on polymer-salt used instead of the common polymer-polymer system due to low viscosity, reduced surface tension, and lower cost of sodium citrate compared to the dextran. For this purpose, the ratio of concentrations of polyethylene glycol to sodium citrate as well as the effect of temperature on the isolation are both investigated and the selectivity and the recovery estimated approximately. The absorbance spectra from both top and bottom phases at different polymer and salt contents and at different temperatures show that by using this system in optimal conditions of polymer to salt ratio of 2:1 at temperature of 20?°C, a suitable separation of nanotubes with 85% yield of the chiral groups of 9 and 10 can be obtained.
| S-EPMC7005278 | biostudies-literature
Project description:A conductive polymer porous film with tunable wettability and adhesion was fabricated by the chloroform solution of poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyricacid-methyl-ester (PCBM) via the freeze drying method. The porous film could be obtained from the solution of 0.8 wt%, whose pore diameters ranged from 50 nm to 500 nm. The hydrophobic porous surface with a water contact angle (CA) of 144.7° could be transferred into a hydrophilic surface with CA of 25° by applying a voltage. The water adhesive force on the porous film increased with the increase of the external voltage. The electro-controllable wettability and adhesion of the porous film have potential application in manipulating liquid collection and transportation.
| S-EPMC5507056 | biostudies-other
Project description:Understanding and controlling the flow of water confined in nanopores has tremendous implications in theoretical studies and industrial applications. Here, we propose a simple model for the confined water flow based on the concept of effective slip, which is a linear sum of true slip, depending on a contact angle, and apparent slip, caused by a spatial variation of the confined water viscosity as a function of wettability as well as the nanopore dimension. Results from this model show that the flow capacity of confined water is 10-1∼107 times that calculated by the no-slip Hagen-Poiseuille equation for nanopores with various contact angles and dimensions, in agreement with the majority of 53 different study cases from the literature. This work further sheds light on a controversy over an increase or decrease in flow capacity from molecular dynamics simulations and experiments.
| S-EPMC5380095 | biostudies-literature
Project description:Persistent pulmonary hypertension of the newborn (PPHN) is characterized by hypoxemia and arterial remodeling. Dynamic stretch and recoil of the arterial wall during pulsation (in normal conduit arteries, stretch 20% above diastolic diameter) maintains homeostasis; a static arterial wall is associated with remodeling. PPHN is diagnosed by echocardiography as decreased pulmonary artery wall displacement during systole, causing decreased pulmonary arterial pressure acceleration time in a stiff artery. We hypothesized that a 'normal' amplitude of pulsatile stretch is protective against ER stress, while the loss of stretch is a trigger for hypoxia-induced stress responses. Using a novel in vitro model of pulmonary arterial myocytes subject to repetitive stretch-relaxation cycles within a normoxic or hypoxic environment, we examined the relative impact of hypoxia (pulmonary circuit during unresolved PPHN) and cyclic mechanical stretch (diminished in PPHN) on myocyte homeostasis, specifically on signaling proteins for autophagy and endoplasmic reticulum (ER) stress. Stretch induced autophagosome abundance under electron microscopy. Hypoxia, in presence or absence of pulsatile stretch, decreased unfolded protein response (UPR) hallmark BIP (GRP78) in contractile phenotype pulmonary arterial myocytes. Inositol requiring enzyme-1 α (IRE1α) was not activated; but hypoxia induced eif2α phosphorylation, increasing expression of ATF4 (activating transcription factor-4). This was sensitive to inhibition by autophagy inhibitor bafilomycin A1. We conclude that in the pulmonary circuit, hypoxia induces one arm of the UPR pathway and causes ER stress. Pulsatile stretch ameliorates the hypoxic UPR response, and while increasing presence of autophagosomes, does not activate canonical autophagy signaling pathways. We propose that simultaneous application of hypoxia and graded levels of cyclic stretch can be used to distinguish myocyte signaling in the deformable pulmonary artery of early PPHN, versus the inflexible late stage PPHN artery.
| S-EPMC8326203 | biostudies-literature
Project description:The effect of laser irradiation on surface wettability of cyclic olefin polymer (COP) was investigated. Under different laser parameters, a superhydrophilic or a superhydrophobic COP surface with a water contact angle (WCA) of almost 0° or 163°, respectively, could be achieved by direct femtosecond laser irradiation. The laser power deposition rate (PDR) was found to be a key factor on the wettability of the laser-treated COP surface. The surface roughness and surface chemistry of the laser-irradiated samples were characterized by surface profilometer and X-ray photoelectron spectroscopy, respectively; they were found to be responsible for the changes of the laser-induced surface wettability. The mechanisms involved in the laser surface wettability modification process were discussed.
| S-EPMC5304633 | biostudies-literature