Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A novel wavelength-adjusting method in InGaN-based light-emitting diodes.

ABSTRACT: The pursuit of high internal quantum efficiency (IQE) for green emission spectral regime is referred as "green gap" challenge. Now researchers place their hope on the InGaN-based materials to develop high-brightness green light-emitting diodes. However, IQE drops fast when emission wavelength of InGaN LED increases by changing growth temperature or well thickness. In this paper, a new wavelength-adjusting method is proposed and the optical properties of LED are investigated. By additional process of indium pre-deposition before InGaN well layer growth, the indium distribution along growth direction becomes more uniform, which leads to the increase of average indium content in InGaN well layer and results in a redshift of peak-wavelength. We also find that the IQE of LED with indium pre-deposition increases with the wavelength redshift. Such dependence is opposite to the IQE-wavelength behavior in conventional InGaN LEDs. The relations among the IQE, wavelength and the indium pre-deposition process are discussed.

SUBMITTER: Deng Z

PROVIDER: S-EPMC3865511 | biostudies-other | 2013

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

High-performance flat-type InGaN-based light-emitting diodes with local breakdown conductive channel.

Project description:Flat-type InGaN-based light-emitting diodes (LEDs) without an n-type contact electrode were developed by using a local breakdown conductive channel (LBCC), and the effect of the In content of the InGaN quantum wells (QWs) on the local breakdown phenomenon was investigated. Electroluminescence and X-ray analyses demonstrated that the homogeneity and crystallinity of the InGaN QWs deteriorated as the In content of the InGaN QWs increased, thereby increasing the reverse leakage current and decreasing the breakdown voltage. After reverse breakdown with a reverse current of several mA, an LBCC was formed on the GaN-based LEDs. The surface size and anisotropic shape of the LBCC increased as the indium content of the InGaN QWs in the LEDs increased. Moreover, a flat-type InGaN LED without an n-type electrode was developed by using the LBCC. Notably, the resistance of the LBCC decreased with increasing indium content in the InGaN QWs, leading to lower resistance and higher light emission of the flat-type InGaN-based LEDs without an n-type contact electrode.

| S-EPMC6754497 | biostudies-literature

Stretchable Transparent Light-Emitting Diodes Based on InGaN/GaN Quantum Well Microwires and Carbon Nanotube Films.

Project description:We propose and demonstrate both flexible and stretchable blue light-emitting diodes based on core/shell InGaN/GaN quantum well microwires embedded in polydimethylsiloxane membranes with strain-insensitive transparent electrodes involving single-walled carbon nanotubes. InGaN/GaN core-shell microwires were grown by metal-organic vapor phase epitaxy, encapsulated into a polydimethylsiloxane film, and then released from the growth substrate. The fabricated free-standing membrane of light-emitting diodes with contacts of single-walled carbon nanotube films can stand up to 20% stretching while maintaining efficient operation. Membrane-based LEDs show less than 15% degradation of electroluminescence intensity after 20 cycles of stretching thus opening an avenue for highly deformable inorganic devices.

| S-EPMC8230151 | biostudies-literature

Phosphor-Free InGaN White Light Emitting Diodes Using Flip-Chip Technology.

Project description:Monolithic phosphor-free two-color gallium nitride (GaN)-based white light emitting diodes (LED) have the potential to replace current phosphor-based GaN white LEDs due to their low cost and long life cycle. Unfortunately, the growth of high indium content indium gallium nitride (InGaN)/GaN quantum dot and reported LED's color rendering index (CRI) are still problematic. Here, we use flip-chip technology to fabricate an upside down monolithic two-color phosphor-free LED with four grown layers of high indium quantum dots on top of the three grown layers of lower indium quantum wells separated by a GaN tunneling barrier layer. The photoluminescence (PL) and electroluminescence (EL) spectra of this white LED reveal a broad spectrum ranging from 475 to 675 nm which is close to an ideal white-light source. The corresponding color temperature and color rendering index (CRI) of the fabricated white LED, operated at 350, 500, and 750 mA, are comparable to that of the conventional phosphor-based LEDs. Insights of the epitaxial structure and the transport mechanism were revealed through the TEM and temperature dependent PL and EL measurements. Our results show true potential in the Epi-ready GaN white LEDs for future solid state lighting applications.

| S-EPMC5506905 | biostudies-other

Fabrication of full-color InGaN-based light-emitting diodes on amorphous substrates by pulsed sputtering.

Project description:InGaN-based light-emitting diodes (LEDs) have been widely accepted as highly efficient light sources capable of replacing incandescent bulbs. However, applications of InGaN LEDs are limited to small devices because their fabrication process involves expensive epitaxial growth of InGaN by metalorganic vapor phase epitaxy on single-crystal wafers. If we can utilize a low-cost epitaxial growth process, such as sputtering on large-area substrates, we can fabricate large-area InGaN light-emitting displays. Here, we report the growth of GaN (0001) and InGaN (0001) films on amorphous SiO2 by pulsed sputtering deposition. We found that using multilayer graphene buffer layers allows the growth of highly c-axis-oriented GaN films even on amorphous substrates. We fabricated red, green, and blue InGaN LEDs and confirmed their successful operation. This successful fabrication of full-color InGaN LEDs on amorphous substrates by sputtering indicates that the technique is quite promising for future large-area light-emitting displays on amorphous substrates.

| S-EPMC4066259 | biostudies-other

A Direct Epitaxial Approach To Achieving Ultrasmall and Ultrabright InGaN Micro Light-Emitting Diodes (?LEDs).

Project description:A direct epitaxial approach to achieving ultrasmall and ultrabright InGaN micro light-emitting diodes (?LEDs) has been developed, leading to the demonstration of ultrasmall, ultraefficient, and ultracompact green ?LEDs with a dimension of 3.6 ?m and an interpitch of 2 ?m. The approach does not involve any dry-etching processes which are exclusively used by any current ?LED fabrication approaches. As a result, our approach has entirely eliminated any damage induced during the dry-etching processes. Our green ?LED array chips exhibit a record external quantum efficiency (EQE) of 6% at ?515 nm in the green spectral region, although our measurements have been performed on bare chips which do not have any coating, passivation, epoxy, or reflector, which are generally used for standard LED packaging in order to enhance extraction efficiency. A high luminance of >107 cd/m2 has been obtained on the ?LED array bare chips. Temperature-dependent measurements show that our ?LED array structure exhibits an internal quantum efficiency (IQE) of 28%. It is worth highlighting that our epitaxial approach is fully compatible with any existing microdisplay fabrication techniques.

| S-EPMC7147254 | biostudies-literature

Carrier localization in In-rich InGaN/GaN multiple quantum wells for green light-emitting diodes.

Project description:Carrier localization phenomena in indium-rich InGaN/GaN multiple quantum wells (MQWs) grown on sapphire and GaN substrates were investigated. Temperature-dependent photoluminescence (PL) spectroscopy, ultraviolet near-field scanning optical microscopy (NSOM), and confocal time-resolved PL (TRPL) spectroscopy were employed to verify the correlation between carrier localization and crystal quality. From the spatially resolved PL measurements, we observed that the distribution and shape of luminescent clusters, which were known as an outcome of the carrier localization, are strongly affected by the crystalline quality. Spectroscopic analysis of the NSOM signal shows that carrier localization of MQWs with low crystalline quality is different from that of MQWs with high crystalline quality. This interrelation between carrier localization and crystal quality is well supported by confocal TRPL results.

| S-EPMC4366764 | biostudies-literature

Flexible topographical design of light-emitting diodes realizing electrically controllable multi-wavelength spectra.

Project description:Multi-wavelength visible light emitters play a crucial role in current solid-state lighting. Although they can be realized by combining semiconductor light-emitting diodes (LEDs) and phosphors or by assembling multiple LED chips with different wavelengths, these design approaches suffer from phosphor-related issues or complex assembly processes. These challenges are significant drawbacks for emerging applications such as visible light communication and micro-LED displays. Herein we present a platform for tailored emission wavelength integration on a single chip utilizing epitaxial growth on flexibly-designed three-dimensional topographies. This approach spontaneously arranges the local emission wavelengths of InGaN-based LED structures through the local In composition variations. As a result, we demonstrate monolithic integration of three different emission colors (violet, blue, and green) on a single chip. Furthermore, we achieve flexible spectral control via independent electrical control of each component. Our integration scheme opens the possibility for tailored spectral control in an arbitrary spectral range through monolithic multi-wavelength LEDs.

| S-EPMC10403568 | biostudies-literature

Determination on the Coefficient of Thermal Expansion in High-Power InGaN-based Light-emitting Diodes by Optical Coherence Tomography.

Project description:The coefficient of thermal expansion (CTE) is a physical quantity that indicates the thermal expansion value of a material upon heating. For advanced thermal management, the accurate and immediate determination of the CTE of packaging materials is gaining importance because the demand for high-power lighting-emitting diodes (LEDs) is currently increasing. In this study, we used optical coherence tomography (OCT) to measure the CTE of an InGaN-based (λ = 450 nm) high-power LED encapsulated in polystyrene resin. The distances between individual interfaces of the OCT images were observed and recorded to derive the instantaneous CTE of the packaged LED under different injected currents. The LED junction temperature at different injected currents was established with the forward voltage method. Accordingly, the measured instantaneous CTE of polystyrene resin varied from 5.86 × 10-5 °C-1 to 14.10 × 10-5 °C-1 in the junction temperature range 25-225 °C and exhibited a uniform distribution in an OCT scanning area of 200 × 200 μm. Most importantly, this work validates the hypothesis that OCT can provide an alternative way to directly and nondestructively determine the spatially resolved CTE of the packaged LED device, which offers significant advantages over traditional CTE measurement techniques.

| S-EPMC5663912 | biostudies-literature

Ultrasmall, Ultracompact and Ultrahigh Efficient InGaN Micro Light Emitting Diodes (?LEDs) with Narrow Spectral Line Width.

Project description:Augmented reality and visual reality (AR and VR) microdisplays require micro light emitting diodes (?LEDs) with an ultrasmall dimension (?5 ?m), high external quantum efficiency (EQE), and narrow spectral line width. Unfortunately, dry etching which is the most crucial step for the fabrication of ?LEDs in current approaches introduces severe damages, which seem to become an insurmountable challenge for achieving ultrasmall ?LEDs with high EQE. Furthermore, it is well-known that ?LEDs which require InGaN layers as an emitting region naturally exhibit significantly broad spectral line width, which becomes increasingly severe toward long wavelengths such as green. In this paper, we have reported a combination of our selective overgrowth approach developed very recently and epitaxial lattice-matched distributed Bragg reflectors (DBRs) embedded in order to address all these fundamental issues. As a result, our ?LEDs with a diameter of 3.6 ?m and an interpitch of 2 ?m exhibit an ultrahigh EQE of 9% at ?500 nm. More importantly, the spectral line width of our ?LEDs has been significantly reduced down to 25 nm, the narrowest value reported so far for III-nitride green ?LEDs.

| S-EPMC7315628 | biostudies-literature

Effects of Asymmetric Quantum Wells on the Structural and Optical Properties of InGaN-Based Light-Emitting Diodes.

Project description:A metalorganic vapor phase epitaxy-grown InGaN/GaN multiple-quantum-well (MQW) with three graded-thickness wells (the first-grown well had the greatest width) near the n-GaN was used as the active layer of an LED. For LEDs with an asymmetric quantum well (AQW), high-resolution X-ray diffraction and transmission electron microscopic reveal that the modified MQWs with a reasonable crystalline quality were coherently strained on the underlying GaN epilayers without any relaxation. In addition, the slight increase of indium segregation in the LED with an AQW may be attributed to variations in indium contents experienced during epitaxial growth of the wide well-containing MQWs. By preventing the energetic electrons from accumulating at the topmost quantum well nearest the p-GaN, the presence of light intensity roll-off in the LED with an AQW is shifted to higher currents and the corresponding maximum light output power is increased with a ratio 7.9% higher than that of normal LEDs. Finally, similar emission wavelengths were observed in the electroluminescence spectra of both LEDs, suggesting that light emitted mostly from the top quantum wells (near the p-GaN) while the emissions from the AQW region were insignificant.

| S-EPMC5453200 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data