Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Fabrication of full-color InGaN-based light-emitting diodes on amorphous substrates by pulsed sputtering.

ABSTRACT: InGaN-based light-emitting diodes (LEDs) have been widely accepted as highly efficient light sources capable of replacing incandescent bulbs. However, applications of InGaN LEDs are limited to small devices because their fabrication process involves expensive epitaxial growth of InGaN by metalorganic vapor phase epitaxy on single-crystal wafers. If we can utilize a low-cost epitaxial growth process, such as sputtering on large-area substrates, we can fabricate large-area InGaN light-emitting displays. Here, we report the growth of GaN (0001) and InGaN (0001) films on amorphous SiO2 by pulsed sputtering deposition. We found that using multilayer graphene buffer layers allows the growth of highly c-axis-oriented GaN films even on amorphous substrates. We fabricated red, green, and blue InGaN LEDs and confirmed their successful operation. This successful fabrication of full-color InGaN LEDs on amorphous substrates by sputtering indicates that the technique is quite promising for future large-area light-emitting displays on amorphous substrates.

SUBMITTER: Shon JW

PROVIDER: S-EPMC4066259 | biostudies-other | 2014

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Fabrication of InGaN thin-film transistors using pulsed sputtering deposition.

Project description:We report the first demonstration of operational InGaN-based thin-film transistors (TFTs) on glass substrates. The key to our success was coating the glass substrate with a thin amorphous layer of HfO2, which enabled a highly c-axis-oriented growth of InGaN films using pulsed sputtering deposition. The electrical characteristics of the thin films were controlled easily by varying their In content. The optimized InGaN-TFTs exhibited a high on/off ratio of ~10(8), a field-effect mobility of ~22 cm(2) V(-1) s(-1), and a maximum current density of ~30 mA/mm. These results lay the foundation for developing high-performance electronic devices on glass substrates using group III nitride semiconductors.

| S-EPMC4935987 | biostudies-literature

Transfer-printed, tandem microscale light-emitting diodes for full-color displays.

Project description:Inorganic semiconductor-based microscale light-emitting diodes (micro-LEDs) have been widely considered the key solution to next-generation, ubiquitous lighting and display systems, with their efficiency, brightness, contrast, stability, and dynamic response superior to liquid crystal or organic-based counterparts. However, the reduction of micro-LED sizes leads to the deteriorated device performance and increased difficulties in manufacturing. Here, we report a tandem device scheme based on stacked red, green, and blue (RGB) micro-LEDs, for the realization of full-color lighting and displays. Thin-film micro-LEDs (size ∼100 μm, thickness ∼5 μm) based on III-V compound semiconductors are vertically assembled via epitaxial liftoff and transfer printing. A thin-film dielectric-based optical filter serves as a wavelength-selective interface for performance enhancement. Furthermore, we prototype arrays of tandem RGB micro-LEDs and demonstrate display capabilities. These materials and device strategies provide a viable path to advanced lighting and display systems.

| S-EPMC8106345 | biostudies-literature

Impact of Plasma Electron Flux on Plasma Damage-Free Sputtering of Ultrathin Tin-Doped Indium Oxide Contact Layer on p-GaN for InGaN/GaN Light-Emitting Diodes.

Project description:The origin of plasma-induced damage on a p -type wide-bandgap layer during the sputtering of tin-doped indium oxide (ITO) contact layers by using radiofrequency-superimposed direct current (DC) sputtering and its effects on the forward voltage and light output power (LOP) of light-emitting diodes (LEDs) with sputtered ITO transparent conductive electrodes (TCE) is systematically studied. Changing the DC power voltage from negative to positive bias reduces the forward voltages and enhances the LOP of the LEDs. The positive DC power drastically decreases the electron flux in the plasma obtained by plasma diagnostics using a cutoff probe and a Langmuir probe, suggesting that the repulsion of plasma electrons from the p -GaN surface can reduce plasma-induced damage to the p -GaN. Furthermore, electron-beam irradiation on p -GaN prior to ITO deposition significantly increases the forward voltages, showing that the plasma electrons play an important role in plasma-induced damage to the p -GaN. The plasma electrons can increase the effective barrier height at the ITO/deep-level defect (DLD) band of p -GaN by compensating DLDs, resulting in the deterioration of the forward voltage and LOP. Finally, the plasma damage-free sputtered-ITO TCE enhances the LOP of the LEDs by 20% with a low forward voltage of 2.9 V at 20 mA compared to LEDs with conventional e-beam-evaporated ITO TCE.

| S-EPMC5827458 | biostudies-literature

Multi-color carbon dots for white light-emitting diodes.

Project description:Heteroatom doped carbon dots (CDs) with color adjustable properties have attracted extensive attention. The doping of elements can effectively tune the surface chemical properties of CDs, thus resulting in its multi-functional applications such as in bio-imaging, photocatalysis, and photothermal conversion. The facile preparation of single metal-doped CDs with color-tunable properties has been rarely reported yet. Herein, we report a one-step solvothermal method to synthesize CDs with different fluorescent emission varying from red to purple to blue. The luminescence characteristic of CDs can be tuned by simply controlling the ratio of precursors, with the emission wavelength correspondingly adjusted from 610 nm to 390 nm. XPS investigation further demonstrated that the color variation is mainly due to the doping of zinc, which will increase the degree of surface oxidation in the as-prepared CDs. For blue emission CDs, the content of graphitic carbon gradually decreases with the rising of zinc chloride addition, while oxygen content remains around 20%, compared with red emission CDs of which the oxygen content is only 4.42%. We also demonstrated with theoretical simulations that the Zn dopant and the functional groups including -C[double bond, length as m-dash]O, -C-OH, -NH2, and pyrrolic N, play an important role in color change. Furthermore, the synthesized CDs have been successfully used into the fabrication of white LEDs. More than that, we produced a sensitive sensor from the prepared CDs for the effective detection of a variety of colorless transparent organic solvents utilizing the robust fluorescence properties of CDs, showing their great potential as fluorescent probes for chemical sensing.

| S-EPMC9062395 | biostudies-literature

Hybrid Color-Tunable Polymer Light-Emitting Diodes Using Electrospraying.

Project description:This paper proposes a new paradigm in polymer light-emitting diode (PLED) fabrication by using a uniform electrosprayed microparticle film as the active layer. Among the seven electrospraying parameters analyzed, three crucial parameters are statistically identified and optimized to obtain thin electrosprayed microparticle layers. Using optimized electrospraying conditions, single-color red-emitting PLED (MEH-PPV) with a peak current density of 16.1 mA/mm2 under a 13.5 V bias and a peak external quantum efficiency of 3.2% are successfully fabricated. Finally, a combinatorial approach is implemented using both MEH-PPV (red-emitting) and F8BT (green-emitting) polymer microparticles at different mixing ratios to tune the emission spectrum of the devices. As such, it has been demonstrated that hybrid multilayer films using different organic materials with nonorthogonal solvents can be produced using this new approach. The parameter analysis and color-tunable properties pave the way towards white light PLED fabrication.

| S-EPMC6868885 | biostudies-literature

High-performance flat-type InGaN-based light-emitting diodes with local breakdown conductive channel.

Project description:Flat-type InGaN-based light-emitting diodes (LEDs) without an n-type contact electrode were developed by using a local breakdown conductive channel (LBCC), and the effect of the In content of the InGaN quantum wells (QWs) on the local breakdown phenomenon was investigated. Electroluminescence and X-ray analyses demonstrated that the homogeneity and crystallinity of the InGaN QWs deteriorated as the In content of the InGaN QWs increased, thereby increasing the reverse leakage current and decreasing the breakdown voltage. After reverse breakdown with a reverse current of several mA, an LBCC was formed on the GaN-based LEDs. The surface size and anisotropic shape of the LBCC increased as the indium content of the InGaN QWs in the LEDs increased. Moreover, a flat-type InGaN LED without an n-type electrode was developed by using the LBCC. Notably, the resistance of the LBCC decreased with increasing indium content in the InGaN QWs, leading to lower resistance and higher light emission of the flat-type InGaN-based LEDs without an n-type contact electrode.

| S-EPMC6754497 | biostudies-literature

Thin-film transistor-driven vertically stacked full-color organic light-emitting diodes for high-resolution active-matrix displays.

Project description:Thin-film transistor (TFT)-driven full-color organic light-emitting diodes (OLEDs) with vertically stacked structures are developed herein using photolithography processes, which allow for high-resolution displays of over 2,000 pixels per inch. Vertical stacking of OLEDs by the photolithography process is technically challenging, as OLEDs are vulnerable to moisture, oxygen, solutions for photolithography processes, and temperatures over 100?°C. In this study, we develop a low-temperature processed Al2O3/SiNx bilayered protection layer, which stably protects the OLEDs from photolithography process solutions, as well as from moisture and oxygen. As a result, transparent intermediate electrodes are patterned on top of the OLED elements without degrading the OLED, thereby enabling to fabricate the vertically stacked OLED. The aperture ratio of the full-color-driven OLED pixel is approximately twice as large as conventional sub-pixel structures, due to geometric advantage, despite the TFT integration. To the best of our knowledge, we first demonstrate the TFT-driven vertically stacked full-color OLED.

| S-EPMC7264127 | biostudies-literature

Facile Fabrication of Amorphous Photonic Structures with Non-Iridescent and Highly-Stable Structural Color on Textile Substrates.

Project description:Amorphous photonic structures with non-iridescent and highly-stable structural color were fabricated via a simple one-step spray-coating technique. With this strategy, the obtained films on textile substrates presented short-ordered and amorphous photonic structures (APSs) similar to the amorphous nanostructures of avian feathers. The structural color presented the same hue when viewed at different angles and could be well controlled by varying the diameters of the SiO? nanospheres. The prepared fabrics with structural color exhibited high color stability due to stability in both the assembled physical structure and the refractive index. The high stability of the assembled physical structure was attributed to the cementing effect of Poly(methylmethacrylate-butylacrylate) P(MMA-BA) existing between textile substrate and SiO? nanospheres and among SiO? nanospheres, while the high stability in the refractive index was contributed by the liquid-resistance achieved by both the surface roughness and the low-surface-energy of the as-sprayed APSs. With the resistances to external forces and liquid invasion, the non-iridescent brilliant structural color of the as-prepared fabrics could be kept steady. In this study, an approach of fabricating APSs with non-iridescent and stable structural color was established to enhance its potential application in structural coloration of textiles, and other color-related smart textiles. .

| S-EPMC6317265 | biostudies-literature

A novel wavelength-adjusting method in InGaN-based light-emitting diodes.

Project description:The pursuit of high internal quantum efficiency (IQE) for green emission spectral regime is referred as "green gap" challenge. Now researchers place their hope on the InGaN-based materials to develop high-brightness green light-emitting diodes. However, IQE drops fast when emission wavelength of InGaN LED increases by changing growth temperature or well thickness. In this paper, a new wavelength-adjusting method is proposed and the optical properties of LED are investigated. By additional process of indium pre-deposition before InGaN well layer growth, the indium distribution along growth direction becomes more uniform, which leads to the increase of average indium content in InGaN well layer and results in a redshift of peak-wavelength. We also find that the IQE of LED with indium pre-deposition increases with the wavelength redshift. Such dependence is opposite to the IQE-wavelength behavior in conventional InGaN LEDs. The relations among the IQE, wavelength and the indium pre-deposition process are discussed.

| S-EPMC3865511 | biostudies-other

Phosphor-Free InGaN White Light Emitting Diodes Using Flip-Chip Technology.

Project description:Monolithic phosphor-free two-color gallium nitride (GaN)-based white light emitting diodes (LED) have the potential to replace current phosphor-based GaN white LEDs due to their low cost and long life cycle. Unfortunately, the growth of high indium content indium gallium nitride (InGaN)/GaN quantum dot and reported LED's color rendering index (CRI) are still problematic. Here, we use flip-chip technology to fabricate an upside down monolithic two-color phosphor-free LED with four grown layers of high indium quantum dots on top of the three grown layers of lower indium quantum wells separated by a GaN tunneling barrier layer. The photoluminescence (PL) and electroluminescence (EL) spectra of this white LED reveal a broad spectrum ranging from 475 to 675 nm which is close to an ideal white-light source. The corresponding color temperature and color rendering index (CRI) of the fabricated white LED, operated at 350, 500, and 750 mA, are comparable to that of the conventional phosphor-based LEDs. Insights of the epitaxial structure and the transport mechanism were revealed through the TEM and temperature dependent PL and EL measurements. Our results show true potential in the Epi-ready GaN white LEDs for future solid state lighting applications.

| S-EPMC5506905 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data