Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Self-cleaning Metal Organic Framework (MOF) based ultra filtration membranes--a solution to bio-fouling in membrane separation processes.

ABSTRACT: Bio-fouling is a serious problem in many membrane-based separation processes for water and wastewater treatment. Current state of the art methods to overcome this are to modify the membranes with either hydrophilic additives or with an antibacterial compound. In this study, we propose and practise a novel concept to prevent bio-fouling by developing a killing and self-cleaning membrane surface incorporating antibacterial silver nanoparticles and highly hydrophilic negatively charged carboxylic and amine functional groups. The innovative surface chemistry helps to reduce the contact angle of the novel membrane by at least a 48% and increase the pure water flux by 39.4% compared to the control membrane. The flux drop for the novel membrane is also lower (16.3% of the initial flux) than the control membrane (55.3% of the initial flux) during the long term experiments with protein solution. Moreover, the novel membrane continues to exhibit inhibition to microbes even after 1320 min of protein filtration. Synthesis of self-cleaning ultrafiltration membrane with long lasting properties opens up a viable solution for bio-fouling in ultrafiltration application for wastewater purification.

SUBMITTER: Prince JA

PROVIDER: S-EPMC4190569 | biostudies-other | 2014

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Insights into the Adsorption of VOCs on a Cobalt-Adeninate Metal-Organic Framework (Bio-MOF-11).

Project description:With increasingly severe air pollution brought by volatile organic compounds (VOCs), the search for efficient adsorbents toward VOC removal is of great significance. Herein, an adenine-based metal-organic framework, namely, bio-MOF-11 [Co2(ad)2(CH3CO2)2·0.3EtOH·0.6H2O, ad = adeninate], was synthesized via a facile method, and its VOC adsorption was reported for the first time. This novel bio-MOF-11 was investigated by employing four common VOCs (i.e., methanol, acetone, benzene, and toluene) as adsorbates. The saturated adsorption capacity of these targeted VOCs on bio-MOF-11 was estimated to be 0.73-3.57 mmol/g, following the order: toluene < benzene < acetone < methanol. Furthermore, with the adsorption temperature increasing from 288 to 308 K, the saturated adsorption capacity was reduced by 7.3-35.6%. It is worth noting that acetone adsorption is most sensitive to temperature ascribed to its low boiling point and strong polar nature. Meanwhile, owing to the molecular sieve effect, the adsorption capacity appears negatively correlated to the size of VOC molecules. Besides, the abundant exposed nitrogen atoms and amino groups in bio-MOF-11 cavities facilitate the adsorption of polar VOC molecules. This work promotes the fundamental understanding and practical application of bio-MOF for adsorptive removal of VOCs.

| S-EPMC7331032 | biostudies-literature

A solution-processable and ultra-permeable conjugated microporous thermoset for selective hydrogen separation.

Project description:The synthesis of a polymer that combines the processability of plastics with the extreme rigidity of cross-linked organic networks is highly attractive for molecular sieving applications. However, cross-linked networks are typically insoluble or infusible, preventing them from being processed as plastics. Here, we report a solution-processable conjugated microporous thermoset with permanent pores of ~0.4 nm, prepared by a simple heating process. When employed as a two-dimensional molecular sieving membrane for hydrogen separation, the membrane exhibits ultrahigh permeability with good selectivity for H2 over CO2, O2, N2, CH4, C3H6 and C3H8. The combined processability, structural rigidity and easy feasibility make this polymeric membrane promising for large-scale hydrogen separations of commercial and environmental relevance.

| S-EPMC7118162 | biostudies-literature

Self-cleaning expanded polytetrafluoroethylene-based hybrid membrane for water filtration.

Project description:Membrane surface fouling is a key problem for water filtration. Compositing photocatalytic substances with a base membrane is a widely used strategy, but most of the membrane will be decomposed by photocatalysis. Herein, expanded polytetrafluoroethylene (ePTFE) with extremely stable chemical properties is grafted with polyacrylic acid (PAA) and then modified with titanium dioxide (TiO2) to realize a self-cleaning TiO2-PAA-ePTFE filtration membrane. It can recover its flux under UV irradiation after fouling. With 20 rounds of self-cleaning, the membrane microstructure still remains intact. Moreover, in addition to retaining bovine serum albumin, TiO2 particles on the membrane surface are capable of absorbing small organic pollutants and degrading them. Thus, this membrane is potentially used as an anti-fouling membrane for water filtration.

| S-EPMC9067432 | biostudies-literature

Effect of Metal-Organic Framework (MOF) Database Selection on the Assessment of Gas Storage and Separation Potentials of MOFs.

Project description:Development of computation-ready metal-organic framework databases (MOF DBs) has accelerated high-throughput computational screening (HTCS) of materials to identify the best candidates for gas storage and separation. These DBs were constructed using structural curations to make MOFs directly usable for molecular simulations, which caused the same MOF to be reported with different structural features in different DBs. We examined thousands of common materials of the two recently updated, very widely used MOF DBs to reveal how structural discrepancies affect simulated CH4 , H2 , CO2 uptakes and CH4 /H2 separation performances of MOFs. Results showed that DB selection has a significant effect on the calculated gas uptakes and ideal selectivities of materials at low pressure. A detailed analysis on the curated structures was provided to isolate the critical elements of MOFs determining the gas uptakes. Identification of the top-performing materials for gas separation was shown to strongly depend on the DB used in simulations.

| S-EPMC8049020 | biostudies-literature

Membrane filtration device for studying compression of fouling layers in membrane bioreactors.

Project description:A filtration devise was developed to assess compressibility of fouling layers in membrane bioreactors. The system consists of a flat sheet membrane with air scouring operated at constant transmembrane pressure to assess the influence of pressure on resistance of fouling layers. By fitting a mathematical model, three model parameters were obtained; a back transport parameter describing the kinetics of fouling layer formation, a specific fouling layer resistance, and a compressibility parameter. This stands out from other on-site filterability tests as model parameters to simulate filtration performance are obtained together with a characterization of compressibility. Tests on membrane bioreactor sludge showed high reproducibility. The methodology's ability to assess compressibility was tested by filtrations of sludges from membrane bioreactors and conventional activated sludge wastewater treatment plants from three different sites. These proved that membrane bioreactor sludge showed higher compressibility than conventional activated sludge. In addition, detailed information on the underlying mechanisms of the difference in fouling propensity were obtained, as conventional activated sludge showed slower fouling formation, lower specific resistance and lower compressibility of fouling layers, which is explained by a higher degree of flocculation.

| S-EPMC5531554 | biostudies-literature

Retention and Fouling during Nanoparticle Filtration: Implications for Membrane Purification of Biotherapeutics.

Project description:One major challenge in the development of nanoparticle-based therapeutics, including viral vectors for the delivery of gene therapies, is the development of cost-effective purification technologies. The objective of this study was to examine fouling and retention behaviors during the filtration of model nanoparticles through membranes of different pore sizes and the effect of solution conditions. Data were obtained with 30 nm fluorescently labeled polystyrene latex nanoparticles using both cellulosic and polyethersulfone membranes at a constant filtrate flux, and both pressure and nanoparticle transmission were evaluated as a function of cumulative filtrate volume. The addition of NaCl caused a delay in nanoparticle transmission and an increase in fouling. Nanoparticle transmission was also a function of particle hydrophobicity. These results provide important insights into the factors controlling transmission and fouling during nanoparticle filtration as well as a framework for the development of membrane processes for the purification of nanoparticle-based therapeutics.

| S-EPMC8953984 | biostudies-literature

Anisotropic MOF-on-MOF Growth of Isostructural Multilayer Metal-Organic Framework Heterostructures.

Project description:Isostructural MOFs with similar crystallographic parameter are easily available for MOF-on-MOF growth and possible to form core-shell structure by isotropic growth. However, due to well-matched cell lattice, selective growth in isostructural MOF heterostructures remains a great challenge for engineering atypical MOF heterostructures. Herein, an anisotropic MOF-on-MOF growth strategy was developed to structure a range of multilayer sandwich-like ZIF-L heterostructures via stacking isostructural ZIF-L-Zn and ZIF-L-Co alternately with three-, five-, seven-, and more layer structures. Moreover, these heterostructures with highly designable feature were fantastic precursors for fabricating derivatives with tunable magnetic and catalytic properties. Such strategy explores a novel way of achieving anisotropic MOF-on-MOF growth between isostructural MOFs and opens up new horizons for regulating the properties by MOF modular assembly in versatile functional nanocomposites.

| S-EPMC8613540 | biostudies-literature

Investigating fouling at the pore-scale using a microfluidic membrane mimic filtration system.

Project description:The work investigates fouling in a microfluidic membrane mimic (MMM) filtration system for foulants such as polystyrene particles and large polymeric molecules. Our MMM device consists of a staggered arrangement of pillars which enables real-time visualization and analysis of pore-scale phenomena. Different fouling scenarios are investigated by conducting constant-pressure experiments. Fouling experiments are performed with three different types of foulants: polystyrene particle solution (colloidal fouling), polyacrylamide polymer solution (organic fouling) and a mixture of these two solutions (combined fouling). Four major categories of microscopic fouling are observed: cake filtration (upstream), pore blocking (inside the pores), colloidal aggregation (downstream) and colloidal streamer fouling (downstream). Our microfluidic experiments show that downstream colloidal aggregation and streamer fouling have a significant effect on overall membrane fouling which were not studied before.

| S-EPMC6646390 | biostudies-literature

Synthesis and Transport Properties of Novel MOF/PIM-1/MOF Sandwich Membranes for Gas Separation.

Project description:Metal-organic frameworks (MOFs) were supported on polymer membrane substrates for the fabrication of composite polymer membranes based on unmodified and modified polymer of intrinsic microporosity (PIM-1). Layers of two different MOFs, zeolitic imidazolate framework-8 (ZIF-8) and Copper benzene tricarboxylate ((HKUST-1), were grown onto neat PIM-1, amide surface-modified PIM-1 and hexamethylenediamine (HMDA) -modified PIM-1. The surface-grown crystalline MOFs were characterized by a combination of several techniques, including powder X-ray diffraction, infrared spectroscopy and scanning electron microscopy to investigate the film morphology on the neat and modified PIM-1 membranes. The pure gas permeabilities of He, H₂, O₂, N₂, CH₄, CO₂ were studied to understand the effect of the surface modification on the basic transport properties and evaluate the potential use of these membranes for industrially relevant gas separations. The pure gas transport was discussed in terms of permeability and selectivity, highlighting the effect of the MOF growth on the diffusion coefficients of the gas in the new composite polymer membranes. The results confirm that the growth of MOFs on polymer membranes can enhance the selectivity of the appropriately functionalized PIM-1, without a dramatic decrease of the permeability.

| S-EPMC5371968 | biostudies-literature

Control of Membrane Fouling in Organics Filtration Using Ce-Doped Zirconia and Visible Light.

Project description:Membrane fouling has been a major issue in the development of more efficient water treatment processes. Specifically in surface waters filtration, organic matter, such as humic-like substances, can cause irreversible fouling. Therefore, this study evaluates the activity of a photocatalytic layer composed of Ce-doped zirconia nanoparticles in improving the fouling resistance during filtration of an aqueous solution of humic acid (HA). These nanoparticles were prepared by hydrothermal and sol-gel processes and then characterized. Before the filtration experiments, the photodegradation of HA catalyzed by Ce-doped zirconia nanoparticles in dispersion was studied. It was observed that the sol-gel prepared Ce-ZrO₂ exhibited higher HA removal in practically neutral pH, achieving 93% efficiency in 180 min of adsorption in the dark followed by 180 min under visible-light irradiation using light-emitting diodes (LEDs). Changes in spectral properties and in total organic carbon confirmed HA degradation and contributed to the proposal of a mechanism for HA photodegradation. Finally, in HA filtration tests, Ce-ZrO₂ photocatalytic membranes were able to recover the flux in a fouled membrane using visible-light by degrading HA. The present findings point to the further development of anti-fouling membranes, in which solar light can be used to degrade fouling compounds and possibly contaminants of emerging concern, which will have important environmental implications.

| S-EPMC6523972 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data