Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Dual conical conducting filament model in resistance switching TiO2 thin films.

ABSTRACT: The resetting behaviors of Pt/TiO2/Pt resistive switching (RS) cell in unipolar RS operations were studied in detail through an experiment and by modeling. The experiment showed that the apparently highly arbitrary resetting current-voltage (I-V) curves could be grouped into three types: normal, delayed, and abnormal behaviors. A dual conical conducting filament (CF) model was conceived, and their electrothermal behaviors were analytically described from the heat-balance and charge-transport equations. The almost spontaneous resetting behavior of the normal reset could be easily understood from the mutually constructive interference effect between the Joule heating and temperature-dependent resistance effect along the CF. The delayed reset could be explained by the time-dependent increase in the reset voltage during the rest process, which was most probably induced in the more conical-shaped CF. The abnormal reset could be understood from the temporal transfer of oxygen ions near the kink positions of the two different-diameter portions of the more cylindrical CFs, which temporally decreases the overall resistance immediately prior for the actual reset to occur. The accuracy of the dual conical CF model was further confirmed by adopting a more thorough electrothermal simulation package, COMSOL.

SUBMITTER: Kim KM

PROVIDER: S-EPMC4297972 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Switched photocurrent direction in Au/TiO2 bilayer thin films.

Project description:Switched photocurrent direction in photoelectrodes is a very interesting phenomenon and has demonstrated their potentials in important applications including photodiodes, phototransistors, light-driven sensors and biosensors. However, the design and mechanism understanding of such photoelectrodes remain challenging to date. Here we report a new phenomenon of sequence-driven the photocurrent direction on a simple bilayer structure of 5 nm thick Au and 10 nm TiO2 under visible-light irradiation. It is found that when Au layer are deposited as the outer layer on TiO2 coated fluorine doped tin oxide (FTO) substrate (designated as FTO/TiO2/Au), anodic photocurrent is obtained due to the band bending formed at the electrode-electrolyte interface. Interestingly, simply swapping the deposition sequence of Au and TiO2 leads to cathodic photocurrent on FTO/Au/TiO2 electrode. Characterization and calculations on the photoelectrode reveals that the photogenerated electrons can be easily trapped in the energy well formed between the band bending and the Schottky contact, which allows electronic tunnelling through the 1.6 nm thick space charge layer, resulting in a unique anodic to cathodic photocurrent conversion. The understanding of this new phenomenon can be important for designing new generation optoelectronic converting devices in a low-cost and facile manner.

| S-EPMC4450582 | biostudies-literature

Versatile solution for growing thin films of conducting polymers.

Project description:The method employed for depositing nanostructures of conducting polymers dictates potential uses in a variety of applications such as organic solar cells, light-emitting diodes, electrochromics, and sensors. A simple and scalable film fabrication technique that allows reproducible control of thickness, and morphological homogeneity at the nanoscale, is an attractive option for industrial applications. Here we demonstrate that under the proper conditions of volume, doping, and polymer concentration, films consisting of monolayers of conducting polymer nanofibers such as polyaniline, polythiophene, and poly(3-hexylthiophene) can be produced in a matter of seconds. A thermodynamically driven solution-based process leads to the growth of transparent thin films of interfacially adsorbed nanofibers. High quality transparent thin films are deposited at ambient conditions on virtually any substrate. This inexpensive process uses solutions that are recyclable and affords a new technique in the field of conducting polymers for coating large substrate areas.

| S-EPMC2993368 | biostudies-literature

Optically Active TiO2:Er Thin Films Deposited by Magnetron Sputtering.

Project description:Titanium dioxide photoanodes for hydrogen generation suffer from a profound mismatch between the optical absorption of TiO2 and the solar spectrum. To solve the problem of low solar-to-chemical efficiency, optically active materials are proposed. In this work, TiO2 thin films containing erbium were deposited by radio frequency RF magnetron sputtering under ultrahigh vacuum conditions UHV. Morphology, structural, optical and electronic properties were studied. TiO2:Er thin films are homogenous, with uniform distribution of Er ions and high transparency over the visible VIS range of the light spectrum. However, a profound 0.4 eV blue shift of the fundamental absorption edge with respect to undoped TiO2 was observed, which can be attributed either to the size effect due to amorphization of TiO2 host or to the onset of precipitation of Er2Ti2O7 nanocrystals. Near-infrared NIR to VIS up-conversion is demonstrated upon excitation at 980 nm, while strong green photoluminescence at 525 and 550 nm occurs upon photon absorption at 488 nm.

| S-EPMC8348420 | biostudies-literature

Analysis of the Inhomogeneous Growth of Sputtered Black TiO2 Thin Films

Project description: Not available

| S-EPMC10993395 | biostudies-literature

Resistance Switching and Memristive Hysteresis in Visible-Light-Activated Adsorbed ZnO Thin Films.

Project description:The discovery of resistance switching memristors marks a paradigm shift in the search for alternative non-volatile memory components in the semiconductor industry. Normally a dielectric in these bistable memory cells changes its resistance with an applied electric field or current, albeit retaining the resistive state based on the history of the applied field. Despite showing immense potential, sustainable growth of this new memory technology is bogged down by several factors including cost, intricacies of design, lack of efficient tunability, and issues with scalability and eco-friendliness. Here, we demonstrate a simple arrangement wherein an ethanol-adsorbed ZnO thin film exhibits orders of magnitude change in resistance when activated by visible light. We show that there exists two stable ohmic states, one in the dark and the other in the illuminated regime, as well as a significant delay in the transition between these saturated states. We also demonstrate that visible light acts as a non-invasive tuning parameter for the bistable resistive states. Furthermore, a pinched hysteresis I-V response observed in these devices indicate what seems to be a new type of memristive behaviour.

| S-EPMC5794968 | biostudies-other

Real-time device-scale imaging of conducting filament dynamics in resistive switching materials.

Project description:ReRAM is a compelling candidate for next-generation non-volatile memory owing to its various advantages. However, fluctuation of operation parameters are critical weakness occurring failures in 'reading' and 'writing' operations. To enhance the stability, it is important to understand the mechanism of the devices. Although numerous studies have been conducted using AFM or TEM, the understanding of the device operation is still limited due to the destructive nature and/or limited imaging range of the previous methods. Here, we propose a new hybrid device composed of ReRAM and LED enabling us to monitor the conducting filament (CF) configuration on the device scale during resistive switching. We directly observe the change in CF configuration across the whole device area through light emission from our hybrid device. In contrast to former studies, we found that minor CFs were formed earlier than major CF contributing to the resistive switching. Moreover, we investigated the substitution of a stressed major CF with a fresh minor CF when large fluctuation of operation voltage appeared after more than 50 times of resistive switching in atmospheric condition. Our results present an advancement in the understanding of ReRAM operation mechanism, and a step toward stabilizing the fluctuations in ReRAM switching parameters.

| S-EPMC4895219 | biostudies-literature

Transparent TiO2 thin films with high photocatalytic activity for indoor air purification.

Project description:The development of low-material-quantity, transparent, anatase TiO2 nanoparticle free thin films as photocatalytic materials together with a profound understanding of their photocatalytic activity under ultraviolet (UV-A) and visible (VIS) light is crucial for environmentally friendly indoor air photocatalytic coatings. In this work, a TiO2 thin film modified by an increased amount of acetylacetone in the precursor solution with a material quantity of 0.2 mg cm-2 was successfully deposited on a borosilicate glass substrate by ultrasonic spray pyrolysis. VOC degradation as a single model pollutant and in mixtures under different operating conditions was studied in a multi-section continuous flow reactor. Under UV-A the reaction rate constants for heptane and toluene oxidation as individual pollutants were 1.7 and 0.9 ppm s-1, respectively. In 9 ppm VOC mixtures of acetaldehyde, acetone, heptane and toluene all the compounds were completely oxidized in a reaction time of less than 50 s. The TiO2 film showed moderately high photocatalytic activity under VIS light. The conversions of acetaldehyde, acetone, heptane and toluene in 9 ppm VOC mixtures under VIS light reached 100, 100, 78 and 31%, respectively. The synthesized TiO2 film shows promising ability in indoor air purification from VOCs. The results of this study give an extensive estimation of the thin film's photocatalytic efficiency and provide valuable data for future applications in environmental remediation.

| S-EPMC9743414 | biostudies-literature

Plasmonic Strain Sensors Based on Au-TiO2 Thin Films on Flexible Substrates.

Project description:This study aimed at introducing thin films exhibiting the localized surface plasmon resonance (LSPR) phenomenon with a reversible optical response to repeated uniaxial strain. The sensing platform was prepared by growing gold (Au) nanoparticles throughout a titanium dioxide dielectric matrix. The thin films were deposited on transparent polymeric substrates, using reactive magnetron sputtering, followed by a low temperature thermal treatment to grow the nanoparticles. The microstructural characterization of the thin films' surface revealed Au nanoparticle with an average size of 15.9 nm, an aspect ratio of 1.29 and an average nearest neighbor nanoparticle at 16.3 nm distance. The plasmonic response of the flexible nanoplasmonic transducers was characterized with custom-made mechanical testing equipment using simultaneous optical transmittance measurements. The higher sensitivity that was obtained at a maximum strain of 6.7%, reached the values of 420 nm/ε and 110 pp/ε when measured at the wavelength or transmittance coordinates of the transmittance-LSPR band minimum, respectively. The higher transmittance gauge factor of 4.5 was obtained for a strain of 10.1%. Optical modelling, using discrete dipole approximation, seems to correlate the optical response of the strained thin film sensor to a reduction in the refractive index of the matrix surrounding the gold nanoparticles when uniaxial strain is applied.

| S-EPMC8963073 | biostudies-literature

Resistive switching studies in VO<sub>2</sub> thin films.

Project description:The hysteretic insulator-to-metal transition of VO2 is studied in detail for pulsed laser deposition grown thin films on TiO2 substrates, under variation of temperature and applied bias currents. This system is of interest for novel electronics based on memristive concepts, in particular as the resistive transition in these films occurs close to room temperature. Multiple, stable resistance states can be set controllably in the temperature range of the hysteretic phase transition by tailored temperature sweeps or by Joule heating induced by current pulses.

| S-EPMC7040009 | biostudies-literature

Real-time identification of the evolution of conducting nano-filaments in TiO2 thin film ReRAM.

Project description:Unipolar resistance switching (RS) in TiO2 thin films originates from the repeated formation and rupture of the Magnéli phase conducting filaments through repeated nano-scale phase transitions. By applying the Johnson-Mehl-Avrami (JMA) type kinetic model to the careful analysis on the evolution of transient current in a pulse-switching, it was possible to elucidate the material specific evolution of the Magnéli phase filament. This methodology was applied to the two types of TiO2 films grown by plasma-enhanced atomic layer deposition (PEALD) and sputtering. These two samples have structurally and electrically distinctive properties: PEALD film exhibited high variability in switching parameters and required an electroforming while sputtered film showed higher uniformity without distinct electroforming process. The JMA-type kinetic analysis of the RS behaviors revealed that the rejuvenation of the filament is accomplished by repeated one-dimensional nucleation followed by a two-dimensional growth in PEALD samples, whereas one-dimensional nucleation-free mechanism dominates in sputtered films.

| S-EPMC3853657 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data