Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Absence of Structural Impact of Noble Nanoparticles on P3HT:PCBM Blends for Plasmon-Enhanced Bulk-Heterojunction Organic Solar Cells Probed by Synchrotron GI-XRD.

ABSTRACT: The incorporation of noble metal nanoparticles, displaying localized surface plasmon resonance, in the active area of donor-acceptor bulk-heterojunction organic photovoltaic devices is an industrially compatible light trapping strategy, able to guarantee better absorption of the incident photons and give an efficiency improvement between 12% and 38%. In the present work, we investigate the effect of Au and Ag nanoparticles blended with P3HT: PCBM on the P3HT crystallization dynamics by synchrotron grazing incidence X-ray diffraction. We conclude that the presence of (1) 80 nm Au, (2) mix of 5 nm, 50 nm, 80 nm Au, (3) 40 nm Ag, and (4) 10 nm, 40 nm, 60 nm Ag colloidal nanoparticles, at different concentrations below 0.3 wt% for Au and below 0.1% for Ag in P3HT: PCBM blends, does not affect the behaviour of the blends themselves.

SUBMITTER: Lilliu S

PROVIDER: S-EPMC4450591 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Phthalocyanine blends improve bulk heterojunction solar cells.

Project description:A core phthalocyanine platform allows engineering of the solubility properties the band gap, shifting the maximum absorption toward the red. A simple method for increasing the efficiency of heterojunction solar cells uses a self-organized blend of phthalocyanine chromophores fabricated by solution processing.

| S-EPMC2836723 | biostudies-literature

Bulk heterojunction morphology of polymer:fullerene blends revealed by ultrafast spectroscopy.

Project description:Morphology of organic photovoltaic bulk heterojunctions (BHJs) - a nanoscale texture of the donor and acceptor phases - is one of the key factors influencing efficiency of organic solar cells. Detailed knowledge of the morphology is hampered by the fact that it is notoriously difficult to investigate by microscopic methods. Here we all-optically track the exciton harvesting dynamics in the fullerene acceptor phase from which subdivision of the fullerene domain sizes into the mixed phase (2-15 nm) and large (>50 nm) domains is readily obtained via the Monte-Carlo simulations. These results were independently confirmed by a combination of X-ray scattering, electron and atomic-force microscopies, and time-resolved photoluminescence spectroscopy. In the large domains, the excitons are lost due to the high energy disorder while in the ordered materials the excitons are harvested with high efficiency even from the domains as large as 100 nm due to the absence of low-energy traps. Therefore, optimizing of blend nanomorphology together with increasing the material order are deemed as winning strategies in the exciton harvesting optimization.

| S-EPMC5099942 | biostudies-literature

Characterising Exciton Generation in Bulk-Heterojunction Organic Solar Cells.

Project description:In this paper, characterisation of exciton generation is carried out in three bulk-heterojunction organic solar cells (BHJ OSCs)-OSC1: an inverted non-fullerene (NF) BHJ OSC; OSC2: a conventional NF BHJ OSC; and OSC3: a conventional fullerene BHJ OSC. It is found that the overlap of the regions of strong constructive interference of incident and reflected electric fields of electromagnetic waves and those of high photon absorption within the active layer depends on the active layer thickness. An optimal thickness of the active layer can thus be obtained at which this overlap is maximum. We have simulated the rates of total exciton generation and position dependent exciton generation within the active layer as a function of the thicknesses of all the layers in all three OSCs and optimised their structures. Based on our simulated results, the inverted NF BHJ OSC1 is found to have better short circuit current density which may lead to better photovoltaic performance than the other two. It is expected that the results of this paper may provide guidance in fabricating highly efficient and cost effective BHJ OSCs.

| S-EPMC7829893 | biostudies-literature

Optically Resonant Bulk Heterojunction PbS Quantum Dot Solar Cell.

Project description:We design an optically resonant bulk heterojunction solar cell to study optoelectronic properties of nanostructured p-n junctions. The nanostructures yield strong light-matter interaction as well as distinct charge-carrier extraction behavior, which together improve the overall power conversion efficiency. We demonstrate high-resolution substrate conformal soft-imprint lithography technology in combination with state-of-the art ZnO nanoparticles to create a nanohole template in an electron transport layer. The nanoholes are infiltrated with PbS quantum dots (QDs) to form a nanopatterned depleted heterojunction. Optical simulations show that the absorption per unit volume in the cylindrical QD absorber layer is enhanced by 19.5% compared to a planar reference. This is achieved for a square array of QD nanopillars of 330 nm height and 320 nm diameter, with a pitch of 500 nm on top of a residual QD layer of 70 nm, surrounded by ZnO. Electronic simulations show that the patterning results in a current gain of 3.2 mA/cm2 and a slight gain in voltage, yielding an efficiency gain of 0.4%. Our simulations further show that the fill factor is highly sensitive to the patterned structure. This is explained by the electric field strength varying strongly across the patterned absorber. We outline a path toward further optimized optically resonant nanopattern geometries with enhanced carrier collection properties. We demonstrate a 0.74 mA/cm2 current gain for a patterned cell compared to a planar cell in experiments, owing to a much improved infrared response, as predicted by our simulations.

| S-EPMC9527793 | biostudies-literature

Relaxation processes in silicon heterojunction solar cells probed via noise spectroscopy.

Project description:We have employed state-of-the-art cross-correlation noise spectroscopy (CCNS) to study carrier dynamics in silicon heterojunction solar cells (SHJ SCs). These cells were composed of a light absorbing n-doped monocrystalline silicon wafer contacted by passivating layers of i-a-Si:H and doped a-Si:H selective contact layers. Using CCNS, we are able to resolve and characterize four separate noise contributions: (1) shot noise with Fano factor close to unity due to holes tunneling through the np-junction, (2) a 1/f term connected to local potential fluctuations of charges trapped in a-Si:H defects, (3) generation-recombination noise with a time constant between 30 and 50 μs and attributed to recombination of holes at the interface between the ITO and n-a-Si:H window layer, and (4) a low-frequency generation-recombination term observed below 100 K which we assign to thermal emission over the ITO/ni-a-Si:H interface barrier. These results not only indicate that CCNS is capable of reveling otherwise undetectable relaxation process in SHJ SCs and other multi-layer devices, but also that the technique has a spatial selectivity allowing for the identification of the layer or interface where these processes are taking place.

| S-EPMC8225850 | biostudies-literature

Hydrogen bonding in bulk heterojunction solar cells: a case study.

Project description:Small molecules with dithieno[3,2-b;2',3'-d]thiophene as central building block and octyl cyanoacetate and octyl cyanoacetamide as different terminal building blocks have been designed and synthesized. The amide containing small molecule can form intermolecular hydrogen bonding between N-H...O = C of the amide group. The photovoltaic properties and active layer morphologies of the two molecules in bulk heterojunction solar cells are compared to study the influence of hydrogen bonding on the active layer morphology. New methanofullerene compound containing amide group has also been synthesized and compared with conventional fullerene electron acceptors.

| S-EPMC4099981 | biostudies-literature

Addition of P3HT-grafted Silica nanoparticles improves bulk-heterojunction morphology in P3HT-PCBM blends.

Project description:We present molecular dynamics simulations of a ternary blend of P3HT, PCBM and P3HT-grafted silica nanoparticles (SiNP) for applications in polymer-based solar cells. Using coarse-grained models, we study the effect of SiNP on the spatial arrangement of PCBM in P3HT. Our results suggest that addition of SiNP not only alters the morphology of PCBM clusters but also improves the crystallinity of P3HT. We exploit the property of grafted SiNP to self-assemble into a variety of anisotropic structures and the tendency of PCBM to preferentially adhere to SiNP surface, due to favorable interactions, to achieve morphologies with desirable characteristics for the active layer, including domain size, crystallinity of P3HT, and elimination of isolated islands of PCBM. As the concentration of SiNP increases, the number of isolated PCBM molecules decreases, which in turn improves the crystallinity of P3HT domains. We also observe that by tuning the grafting parameters of SiNP, it is possible to achieve structures ranging from cylindrical to sheets to highly interconnected network of strings. The changes brought about by addition of SiNP shows a promising potential to improve the performance of these materials when used as active layers in organic photovoltaics.

| S-EPMC5024111 | biostudies-literature

Inverted bulk-heterojunction solar cell with cross-linked hole-blocking layer.

Project description:We have developed a hole-blocking layer for bulk-heterojunction solar cells based on cross-linked polyethylenimine (PEI). We tested five different ether-based cross-linkers and found that all of them give comparable solar cell efficiencies. The initial idea that a cross-linked layer is more solvent resistant compared to a pristine PEI layer could not be confirmed. With and without cross-linking, the PEI layer sticks very well to the surface of the indium-tin-oxide electrode and cannot be removed by solvents used to process PEI or common organic semiconductors. The cross-linked PEI hole-blocking layer functions for multiple donor-acceptor blends. We found that using cross-linkers improves the reproducibility of the device fabrication process.

| S-EPMC4010259 | biostudies-literature

Substrate-oriented nanorod scaffolds in polymer-fullerene bulk heterojunction solar cells.

Project description:The use of a p-type inorganic semiconductor to form a nanorod scaffold within a polymer-fullerene bulk heterojunction solar cell is reported. The performance of this cell is compared to those made of the commonly used n-type scaffold of ZnO, which has been reported many times in the literature. The scaffold is designed to improve charge-carrier collection by increased mobility in thicker samples. Observations show that generally the device performance shows a negative correlation to nanorod length. By using CuSCN as a p-type inorganic scaffold, a very similar trend is observed.

| S-EPMC4501325 | biostudies-literature

Impact of Electrodes on Recombination in Bulk Heterojunction Organic Solar Cells.

Project description:In recent years, the efficiency of organic solar cells (OSCs) has increased to more than 13%, although different barriers are on the way for reaching higher efficiencies. One crucial barrier is the recombination of charge carriers, which can either occur as the bulk recombination of photogenerated charges or the recombination of photogenerated charges and electrodic induced charges (EICs). This work studies the impact of EICs on the recombination lifetime in OSCs. To this end, the net recombination lifetime of photogenerated charge carriers in the presence of EICs is measured by means of conventional and newly developed transient photovoltage techniques. Moreover, a new approach has been introduced to exclusively measure the bulk recombination lifetime, i.e., in the absence of EICs; this approach was conducted by depositing transparent insulating layers on both sides of the OSC active layer. An examination of these approaches on OSCs with different active layer materials, thicknesses, and varying light intensities determined that the EICs can only reduce the recombination lifetime of the photogenerated charges in OSCs with very weak recombination strength. This work supports that for OSCs with highly reduced recombination strength, eliminating the recombination of photogenerated charges and EICs is critical for achieving better performance. Therefore, the use of a proper blocking layer suppresses EIC recombination in systems with very weak recombination.

| S-EPMC5997384 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data