Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Atomic-layer molybdenum sulfide optical modulator for visible coherent light.

ABSTRACT: Coherent light sources in the visible range are playing important roles in our daily life and modern technology, since about 50% of the capability of the our human brains is devoted to processing visual information. Visible lasers can be achieved by nonlinear optical process of infrared lasers and direct lasing of gain materials, and the latter has advantages in the aspects of compactness, efficiency, simplicity, etc. However, due to lack of visible optical modulators, the directly generated visible lasers with only a gain material are constrained in continuous-wave operation. Here, we demonstrated the fabrication of a visible optical modulator and pulsed visible lasers based on atomic-layer molybdenum sulfide (MoS2), a ultrathin two-dimensional material with about 9-10 layers. By employing the nonlinear absorption of the modulator, the pulsed orange, red and deep red lasers were directly generated. Besides, the present atomic-layer MoS2 optical modulator has broadband modulating properties and advantages in the simple preparation process. The present results experimentally verify the theoretical prediction for the low-dimensional optoelectronic modulating devices in the visible wavelength region and may open an attractive avenue for removing a stumbling block for the further development of pulsed visible lasers.

SUBMITTER: Zhang Y

PROVIDER: S-EPMC4464310 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Photocatalytic Hydrogen Generation from a Visible-Light-Responsive Metal-Organic Framework System: Stability versus Activity of Molybdenum Sulfide Cocatalysts.

Project description:We report the use of two earth abundant molybdenum sulfide-based cocatalysts, Mo3S132- clusters and 1T-MoS2 nanoparticles (NPs), in combination with the visible-light active metal-organic framework (MOF) MIL-125-NH2 for the photocatalytic generation of hydrogen (H2) from water splitting. Upon irradiation (? ? 420 nm), the best-performing mixtures of Mo3S132-/MIL-125-NH2 and 1T-MoS2/MIL-125-NH2 exhibit high catalytic activity, producing H2 with evolution rates of 2094 and 1454 ?mol h-1 gMOF-1 and apparent quantum yields of 11.0 and 5.8% at 450 nm, respectively, which are among the highest values reported to date for visible-light-driven photocatalysis with MOFs. The high performance of Mo3S132- can be attributed to the good contact between these clusters and the MOF and the large number of catalytically active sites, while the high activity of 1T-MoS2 NPs is due to their high electrical conductivity leading to fast electron transfer processes. Recycling experiments revealed that although the Mo3S132-/MIL-125-NH2 slowly loses its activity, the 1T-MoS2/MIL-125-NH2 retains its activity for at least 72 h. This work indicates that earth-abundant compounds can be stable and highly catalytically active for photocatalytic water splitting, and should be considered as promising cocatalysts with new MOFs besides the traditional noble metal NPs.

| S-EPMC6137427 | biostudies-literature

Atomic Vacancies of Molybdenum Disulfide Nanoparticles Stimulate Mitochondrial Biogenesis

Project description:Atomic vacancies rich MoS2 nanoflowers stimulate mitochondrial function by reducing cellualr ROS generation and upregulating the expression of genes required for mitochondrial biogenesis.

2024-06-27 | GSE235996 | GEO

Nanomechanical electro-optical modulator based on atomic heterostructures.

Project description:Two-dimensional atomic heterostructures combined with metallic nanostructures allow one to realize strong light-matter interactions. Metallic nanostructures possess plasmonic resonances that can be modulated by graphene gating. In particular, spectrally narrow plasmon resonances potentially allow for very high graphene-enabled modulation depth. However, the modulation depths achieved with this approach have so far been low and the modulation wavelength range limited. Here we demonstrate a device in which a graphene/hexagonal boron nitride heterostructure is suspended over a gold nanostripe array. A gate voltage across these devices alters the location of the two-dimensional crystals, creating strong optical modulation of its reflection spectra at multiple wavelengths: in ultraviolet Fabry-Perot resonances, in visible and near-infrared diffraction-coupled plasmonic resonances and in the mid-infrared range of hexagonal boron nitride's upper Reststrahlen band. Devices can be extremely subwavelength in thickness and exhibit compact and truly broadband modulation of optical signals using heterostructures of two-dimensional materials.

| S-EPMC5121424 | biostudies-literature

Angular light modulator using optical blinds.

Project description:Spatial light modulator (SLM) is widely used in imaging applications for modulating light intensity and phase delay. In this paper, we report a novel device concept termed angular light modulator (ALM). Different from the SLM, the reported ALM employs a tunable blind structure to modulate the angular components of the incoming light waves. For spatial-domain light modulation, the ALM can be directly placed in front of an image sensor for selecting different angular light components. In this case, we can sweep the slat angle of the blind structure and capture multiple images corresponding to different perspectives. These images can then be back-projected for 3D tomographic refocusing. By using a fixed slat angle, we can also convert the incident-angle information into intensity variations for wavefront sensing or introduce a translational shift to the defocused object for high-speed autofocusing. For Fourier-domain light modulation, the ALM can be placed at the pupil plane of an optical system for reinforcing the light propagating trajectories. We show that a pupil-plane-modulated system is able to achieve a better resolution for out-of-focus objects while maintaining the same resolution for in-focus objects. The reported ALM can be fabricated on the chip level and controlled by an external magnetic field. It may provide new insights for developing novel imaging and vision devices.

| S-EPMC5234498 | biostudies-literature

In Vivo Sublayer Analysis of Human Retinal Inner Plexiform Layer Obtained by Visible-Light Optical Coherence Tomography.

Project description:PurposeGrowing evidence suggests that dendrite retraction or degeneration in a subpopulation of the retinal ganglion cells (RGCs) may precede detectable soma abnormalities and RGC death in glaucoma. Visualization of the lamellar structure of the inner plexiform layer (IPL) could advance clinical management and fundamental understanding of glaucoma. We investigated whether visible-light optical coherence tomography (vis-OCT) could detect the difference in the IPL sublayer thicknesses between small cohorts of healthy and glaucomatous subjects.MethodWe imaged nine healthy and five glaucomatous subjects with vis-OCT. Four of the healthy subjects were scanned three times each in two separate visits, and five healthy and five glaucoma subjects were scanned three times during a single visit. IPL sublayers were manually segmented using averaged A-line profiles.ResultsThe mean ages of glaucoma and healthy subjects are 59.6 ± 13.4 and 45.4 ± 14.4 years (P = 0.02.) The visual field mean deviations (MDs) are -26.4 to -7.7 dB in glaucoma patients and -1.6 to 1.1 dB in healthy subjects (P = 0.002). Median coefficients of variation (CVs) of intrasession repeatability for the entire IPL and three sublayers are 3.1%, 5.6%, 6.9%, and 5.6% in healthy subjects and 1.8%, 6.0%, 7.7%, and 6.2% in glaucoma patients, respectively. The mean IPL thicknesses are 36.2 ± 1.5 µm in glaucomatous and 40.1 ± 1.7 µm in healthy eyes (P = 0.003).ConclusionsIPL sublayer analysis revealed that the middle sublayer could be responsible for the majority of IPL thinning in glaucoma. Vis-OCT quantified IPL sublayers with good repeatability in both glaucoma and healthy subjects.

| S-EPMC8762683 | biostudies-literature

One-hour coherent optical storage in an atomic frequency comb memory.

Project description:Photon loss in optical fibers prevents long-distance distribution of quantum information on the ground. Quantum repeater is proposed to overcome this problem, but the communication distance is still limited so far because of the system complexity of the quantum repeater scheme. Alternative solutions include transportable quantum memory and quantum-memory-equipped satellites, where long-lived optical quantum memories are the key components to realize global quantum communication. However, the longest storage time of the optical memories demonstrated so far is approximately 1 minute. Here, by employing a zero-first-order-Zeeman magnetic field and dynamical decoupling to protect the spin coherence in a solid, we demonstrate coherent storage of light in an atomic frequency comb memory over 1 hour, leading to a promising future for large-scale quantum communication based on long-lived solid-state quantum memories.

| S-EPMC8062444 | biostudies-literature

Ultracompact (3 ?m) silicon slow-light optical modulator.

Project description:Wavelength-scale optical modulators are essential building blocks for future on-chip optical interconnects. Any modulator design is a trade-off between bandwidth, size and fabrication complexity, size being particularly important as it determines capacitance and actuation energy. Here, we demonstrate an interesting alternative that is only 3 ?m long, only uses silicon on insulator (SOI) material and accommodates several nanometres of optical bandwidth at 1550 nm. The device is based on a photonic crystal waveguide: by combining the refractive index shift with slow-light enhanced absorption induced by free-carrier injection, we achieve an operation bandwidth that significantly exceeds the shift of the bandedge. We compare a 3 ?m and an 80 ?m long modulator and surprisingly, the shorter device outperforms the longer one. Despite its small size, the device achieves an optical bandwidth as broad as 7 nm for an extinction ratio of 10 dB, and modulation times ranging between 500 ps and 100 ps.

| S-EPMC3866636 | biostudies-literature

Gallium phosphide optical metasurfaces for visible light applications.

Project description:There are few materials that are broadly used for fabricating optical metasurfaces for visible light applications. Gallium phosphide (GaP) is a material that, due to its optical properties, has the potential to become a primary choice but due to the difficulties in fabrication, GaP thin films deposited on transparent substrates have never been exploited. In this article we report the design, fabrication, and characterization of three different amorphous GaP metasurfaces obtained through sputtering. Although the material properties can be further optimized, our results show the potential of this material for visible applications making it a viable alternative in the material selection for optical metasurfaces.

| S-EPMC7691993 | biostudies-literature

Coherent poly propagation materials with 3-dimensional photonic control over visible light.

Project description:The purpose of the present research was to identify and examine materials demonstrating a previously undiscovered property of coherent poly propagation (CPP). The materials were amorphous silicates as natural precious opals. CPP enabled three-dimensional photonic control over mono and polychromatic visible light wavelengths. CPP caused coherent diffraction of incident poly and monochromatic light. Apart from the iconic play-of-color of precious opal, CPP specimens demonstrated diffractive photonic demultiplexing and/or upconversion and/or downconversion of incident light with strong photonic coherence such that the shape of the incident light source was propagated over three dimensions over multiple visible frequencies. CPP events manifested as each specimen was rocked under the incident light. Additionally, the specimens demonstrated atypical control over internally reflected and transmitted light. The specimens applied axial rotational symmetry over the incident light. Amorphous materials would be expected to exert no symmetry control. CPP and rotational properties occurred in isolation from exogenous thermal, photonic and electrical influences. Furthermore, several non-destructive analytical instruments were employed, such as: spectrophotometer, polariscope and refractometer. The analytical methods revealed unusual behaviors of these specimens. The application of materials demonstrating three-dimensional photonic control will have far-reaching implications for many industries, including: photonic wavelength demultiplexing, fiber optics, imaging, microscopy, projections, security, cryptography, computers and communications.

| S-EPMC6797174 | biostudies-literature

Microstructure-Dependent Visible-Light Driven Photoactivity of Sputtering-Assisted Synthesis of Sulfide-Based Visible-Light Sensitizer onto ZnO Nanorods.

Project description:The ZnO-CdS core-shell composite nanorods with CdS shell layer thicknesses of 5 and 20 nm were synthesized by combining the hydrothermal growth of ZnO nanorods with the sputtering thin-film deposition of CdS crystallites. The microstructures and optical properties of the ZnO-CdS nanorods were associated with the CdS shell layer thickness. A thicker CdS shell layer resulted in a rougher surface morphology, more crystal defects, and a broader optical absorbance edge in the ZnO-CdS rods. The ZnO-CdS (20 nm) nanorods thus engaged in more photoactivity in this study. When they were further subjected to a postannealing procedure in ambient Ar/H₂, this resulted in the layer-like CdS shell layers being converted into the serrated CdS shell layers. By contrast, the ZnO-CdS nanorods conducted with the postannealing procedure exhibited superior photoactivity and photoelectrochemical performance; the substantial changes in the microstructures and optical properties of the composite nanorods following postannealing in this study might account for the observed results.

| S-EPMC5457004 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data