Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Effect of Temperature on the Aging rate of Li Ion Battery Operating above Room Temperature.

ABSTRACT: Temperature is known to have a significant impact on the performance, safety, and cycle lifetime of lithium-ion batteries (LiB). However, the comprehensive effects of temperature on the cyclic aging rate of LiB have yet to be found. We use an electrochemistry-based model (ECBE) here to measure the effects on the aging behavior of cycled LiB operating within the temperature range of 25 °C to 55 °C. The increasing degradation rate of the maximum charge storage of LiB during cycling at elevated temperature is found to relate mainly to the degradations at the electrodes, and that the degradation of LCO cathode is larger than graphite anode at elevated temperature. In particular, the formation and modification of the surface films on the electrodes as well as structural/phase changes of the LCO electrode, as reported in the literatures, are found to be the main contributors to the increasing degradation rate of the maximum charge storage of LiB with temperature for the specific operating temperature range. Larger increases in the Warburg elements and cell impedance are also found with cycling at higher temperature, but they do not seriously affect the state of health (SoH) of LiB as shown in this work.

SUBMITTER: Leng F

PROVIDER: S-EPMC4526891 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Solid-State Li-Ion Batteries Operating at Room Temperature Using New Borohydride Argyrodite Electrolytes.

Project description:Using a new class of (BH4)- substituted argyrodite Li6PS5Z0.83(BH4)0.17, (Z = Cl, I) solid electrolyte, Li-metal solid-state batteries operating at room temperature have been developed. The cells were made by combining the modified argyrodite with an In-Li anode and two types of cathode: an oxide, LixMO2 (M = ⅓ Ni, ⅓ Mn, ⅓ Co; so called NMC) and a titanium disulfide, TiS2. The performance of the cells was evaluated through galvanostatic cycling and Alternating Current AC electrochemical impedance measurements. Reversible capacities were observed for both cathodes for at least tens of cycles. However, the high-voltage oxide cathode cell shows lower reversible capacity and larger fading upon cycling than the sulfide one. The AC impedance measurements revealed an increasing interfacial resistance at the cathode side for the oxide cathode inducing the capacity fading. This resistance was attributed to the intrinsic poor conductivity of NMC and interfacial reactions between the oxide material and the argyrodite electrolyte. On the contrary, the low interfacial resistance of the TiS2 cell during cycling evidences a better chemical compatibility between this active material and substituted argyrodites, allowing full cycling of the cathode material, 240 mAhg-1, for at least 35 cycles with a coulombic efficiency above 97%.

| S-EPMC7558157 | biostudies-literature

Superior Low-Temperature Power and Cycle Performances of Na-Ion Battery over Li-Ion Battery.

Project description:The most simple and clear advantage of Na-ion batteries (NIBs) over Li-ion batteries (LIBs) is the natural abundance of Na, which allows inexpensive production of NIBs for large-scale applications. However, although strenuous research efforts have been devoted to NIBs particularly since 2010, certain other advantages of NIBs have been largely overlooked, for example, their low-temperature power and cycle performances. Herein, we present a comparative study of spirally wound full-cells consisting of Li0.1Na0.7Co0.5Mn0.5O2 (or Li0.8Co0.5Mn0.5O2) and hard carbon and report that the power of NIB at -30 °C is ∼21% higher than that of LIB. Moreover, the capacity retention in cycle testing at 0 °C is ∼53% for NIB but only ∼29% for LIB. Raman spectroscopy and density functional theory calculations revealed that the superior performance of NIB is due to the relatively weak interaction between Na+ ions and aprotic polar solvents.

| S-EPMC6640915 | biostudies-literature

Noncovalent Approach to Liquid-Crystalline Ion Conductors: High-Rate Performances and Room-Temperature Operation for Li-Ion Batteries.

Project description:We report advanced liquid-crystalline (LC) electrolytes for use in lithium-ion batteries (LIBs). We evaluated the potential of LC electrolytes with a half cell composed of Li metal and LiFePO4 which is a conventional positive electrode for LIBs. Low-molecular-weight carbonates of ethylene carbonate or propylene carbonate were incorporated into the two-dimensional (2D) nanostructured electrolyte composed of mesogen-containing carbonate and lithium bis(trifluoromethylsulfonyl)imide. The incorporation of low-molecular-weight carbonates increased the ionic conductivity with maintaining 2D nanostructures in the LC state. High-power performances at relatively high current densities induced by higher ionic conductivities have been achieved by LC electrolytes with low-molecular-weight carbonates. Furthermore, room-temperature operation of LIBs using LC electrolytes is reported for the first time. In the research field of electrolytes for LIBs, we demonstrate the progress of a new category of LC electrolytes.

| S-EPMC6641243 | biostudies-literature

From Allergens to Battery Anodes: Nature-Inspired, Pollen Derived Carbon Architectures for Room- and Elevated-Temperature Li-ion Storage.

Project description:The conversion of allergic pollen grains into carbon microstructures was carried out through a facile, one-step, solid-state pyrolysis process in an inert atmosphere. The as-prepared carbonaceous particles were further air activated at 300 °C and then evaluated as lithium ion battery anodes at room (25 °C) and elevated (50 °C) temperatures. The distinct morphologies of bee pollens and cattail pollens are resembled on the final architecture of produced carbons. Scanning Electron Microscopy images shows that activated bee pollen carbon (ABP) is comprised of spiky, brain-like, and tiny spheres; while activated cattail pollen carbon (ACP) resembles deflated spheres. Structural analysis through X-ray diffraction and Raman spectroscopy confirmed their amorphous nature. X-ray photoelectron spectroscopy analysis of ABP and ACP confirmed that both samples contain high levels of oxygen and small amount of nitrogen contents. At C/10 rate, ACP electrode delivered high specific lithium storage reversible capacities (590 mAh/g at 50 °C and 382 mAh/g at 25 °C) and also exhibited excellent high rate capabilities. Through electrochemical impedance spectroscopy studies, improved performance of ACP is attributed to its lower charge transfer resistance than ABP. Current studies demonstrate that morphologically distinct renewable pollens could produce carbon architectures for anode applications in energy storage devices.

| S-EPMC4742870 | biostudies-literature

Reaction temperature sensing (RTS)-based control for Li-ion battery safety.

Project description:We report reaction temperature sensing (RTS)-based control to fundamentally enhance Li-ion battery safety. RTS placed at the electrochemical interface inside a Li-ion cell is shown to detect temperature rise much faster and more accurately than external measurement of cell surface temperature. We demonstrate, for the first time, that RTS-based control shuts down a dangerous short-circuit event 3 times earlier than surface temperature- based control and prevents cell overheating by 50 °C and the resultant cell damage.

| S-EPMC4675999 | biostudies-literature

Etched colloidal LiFePO4 nanoplatelets toward high-rate capable Li-ion battery electrodes.

Project description:LiFePO4 has been intensively investigated as a cathode material in Li-ion batteries, as it can in principle enable the development of high power electrodes. LiFePO4, on the other hand, is inherently "plagued" by poor electronic and ionic conductivity. While the problems with low electron conductivity are partially solved by carbon coating and further by doping or by downsizing the active particles to nanoscale dimensions, poor ionic conductivity is still an issue. To develop colloidally synthesized LiFePO4 nanocrystals (NCs) optimized for high rate applications, we propose here a surface treatment of the NCs. The particles as delivered from the synthesis have a surface passivated with long chain organic surfactants, and therefore can be dispersed only in aprotic solvents such as chloroform or toluene. Glucose that is commonly used as carbon source for carbon-coating procedure is not soluble in these solvents, but it can be dissolved in water. In order to make the NCs hydrophilic, we treated them with lithium hexafluorophosphate (LiPF6), which removes the surfactant ligand shell while preserving the structural and morphological properties of the NCs. Only a roughening of the edges of NCs was observed due to a partial etching of their surface. Electrodes prepared from these platelet NCs (after carbon coating) delivered a capacity of ? 155 mAh/g, ? 135 mAh/g, and ? 125 mAh/g, at 1 C, 5 C, and 10 C, respectively, with significant capacity retention and remarkable rate capability. For example, at 61 C (10.3 A/g), a capacity of ? 70 mAh/g was obtained, and at 122 C (20.7 A/g), the capacity was ? 30 mAh/g. The rate capability and the ease of scalability in the preparation of these surface-treated nanoplatelets make them highly suitable as electrodes in Li-ion batteries.

| S-EPMC4264480 | biostudies-literature

Above-room-temperature ferroelectricity and antiferroelectricity in benzimidazoles.

Project description:The imidazole unit is chemically stable and ubiquitous in biological systems; its proton donor and acceptor moieties easily bind molecules into a dipolar chain. Here we demonstrate that chains of these amphoteric molecules can often be bistable in electric polarity and electrically switchable, even in the crystalline state, through proton tautomerization. Polarization-electric field (P-E) hysteresis experiments reveal a high electric polarization ranging from 5 to 10??C?cm(-2) at room temperature. Of these molecules, 2-methylbenzimidazole allows ferroelectric switching in two dimensions due to its pseudo-tetragonal crystal symmetry. The ferroelectricity is also thermally robust up to 400?K, as is that of 5,6-dichloro-2-methylbenzimidazole (up to ~373?K). In contrast, three other benzimidazoles exhibit double P-E hysteresis curves characteristic of antiferroelectricity. The diversity of imidazole substituents is likely to stimulate a systematic exploration of various structure-property relationships and domain engineering in the quest for lead- and rare-metal-free ferroelectric devices.

| S-EPMC3535420 | biostudies-literature

A stable room-temperature sodium-sulfur battery.

Project description:High-energy rechargeable batteries based on earth-abundant materials are important for mobile and stationary storage technologies. Rechargeable sodium-sulfur batteries able to operate stably at room temperature are among the most sought-after platforms because such cells take advantage of a two-electron-redox process to achieve high storage capacity from inexpensive electrode materials. Here we report a room-temperature sodium-sulfur battery that uses a microporous carbon-sulfur composite cathode, and a liquid carbonate electrolyte containing the ionic liquid 1-methyl-3-propylimidazolium-chlorate tethered to SiO2 nanoparticles. We show that these cells can cycle stably at a rate of 0.5 C (1 C=1675, mAh g(-1)) with 600 mAh g(-1) reversible capacity and nearly 100% Coulombic efficiency. By means of spectroscopic and electrochemical analysis, we find that the particles form a sodium-ion conductive film on the anode, which stabilizes deposition of sodium. We also find that sulfur remains interred in the carbon pores and undergo solid-state electrochemical reactions with sodium ions.

| S-EPMC4906167 | biostudies-literature

The Effect of Operating Room Temperature on the Performance of Clinical and Cognitive Tasks.

Project description:IntroductionOperating room (OR) temperature may impact the performance of health care providers. This study assesses whether hot or cold room temperature diminishes the performance of OR personnel measured by psychomotor vigilance testing (PVT) and self-report scales.MethodsThis prospective observational study enrolled surgical/anesthesia trainees, student registered nurse anesthetists, and certified registered nurse anesthetists. Each provider participated in a test of psychomotor function and a questionnaire using a self-report scale of personal comfort and well-being. The PVT and questionnaires were completed after 30 minutes of exposure to 3 different conditions (temperature of 21°C, 23°C, and 26°C).ResultsThe cohort of 22 personnel included 9 certified registered nurse anesthetists, 7 anesthesia/surgical trainees, and 6 student registered nurse anesthetists. Mean reaction time on the PVT was comparable among baseline (280 ± 47 ms), hot (286 ± 55 ms; P = 0.171), and cold (303 ± 114 ms; P = 0.378) conditions. On the self-report score (range, 1-21), there was no difference in the self-rated subjective performance between baseline and cold conditions. However, the self-rated subjective performance scale was lower (12 ± 6, P = 0.003) during hot conditions.DiscussionNo difference was noted in reaction time depending on the temperature; however, excessive heat in the OR environment was associated with worse self-rated subjective performance among health care providers. Particularly, self-rated subjective physical demand and frustration were greater under hot condition.

| S-EPMC6132757 | biostudies-literature

Room-Temperature Solid-State Lithium-Ion Battery Using a LiBH<sub>4</sub>-MgO Composite Electrolyte.

Project description:LiBH4 has been widely studied as a solid-state electrolyte in Li-ion batteries working at 120 °C due to the low ionic conductivity at room temperature. In this work, by mixing with MgO, the Li-ion conductivity of LiBH4 has been improved. The optimum composition of the mixture is 53 v/v % of MgO, showing a Li-ion conductivity of 2.86 × 10-4 S cm-1 at 20 °C. The formation of the composite does not affect the electrochemical stability window, which is similar to that of pure LiBH4 (about 2.2 V vs Li+/Li). The mixture has been incorporated as the electrolyte in a TiS2/Li all-solid-state Li-ion battery. A test at room temperature showed that only five cycles already resulted in cell failure. On the other hand, it was possible to form a stable solid electrolyte interphase by applying several charge/discharge cycles at 60 °C. Afterward, the battery worked at room temperature for up to 30 cycles with a capacity retention of about 80%.

| S-EPMC7903705 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data