Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Fully Integrated Passive UHF RFID Tag for Hash-Based Mutual Authentication Protocol.

ABSTRACT: Passive radio-frequency identification (RFID) tag has been used in many applications. While the RFID market is expected to grow, concerns about security and privacy of the RFID tag should be overcome for the future use. To overcome these issues, privacy-preserving authentication protocols based on cryptographic algorithms have been designed. However, to the best of our knowledge, evaluation of the whole tag, which includes an antenna, an analog front end, and a digital processing block, that runs authentication protocols has not been studied. In this paper, we present an implementation and evaluation of a fully integrated passive UHF RFID tag that runs a privacy-preserving mutual authentication protocol based on a hash function. We design a single chip including the analog front end and the digital processing block. We select a lightweight hash function supporting 80-bit security strength and a standard hash function supporting 128-bit security strength. We show that when the lightweight hash function is used, the tag completes the protocol with a reader-tag distance of 10 cm. Similarly, when the standard hash function is used, the tag completes the protocol with the distance of 8.5 cm. We discuss the impact of the peak power consumption of the tag on the distance of the tag due to the hash function.

SUBMITTER: Mikami S

PROVIDER: S-EPMC4603319 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Novel Concrete Temperature Monitoring Method Based on an Embedded Passive RFID Sensor Tag.

Project description:This paper firstly introduces the importance of temperature control in concrete measurement, then a passive radio frequency identification (RFID) sensor tag embedded for concrete temperature monitoring is presented. In order to reduce the influences of concrete electromagnetic parameters during the drying process, a T-type antenna is proposed to measure the concrete temperature at the required depth. The proposed RFID sensor tag is based on the EPC generation-2 ultra-high frequency (UHF) communication protocol and operates in passive mode. The temperature sensor can convert the sensor signals to corresponding digital signals without an external reference clock due to the adoption of phase-locked loop (PLL)-based architecture. Laboratory experimentation and on-site testing demonstrate that our sensor tag embedded in concrete can provide reliable communication performance in passive mode. The maximum communicating distance between reader and tag is 7 m at the operating frequency of 915 MHz and the tested results show high consistency with the results tested by a thermocouple.

| S-EPMC5539613 | biostudies-other

A secure RFID authentication protocol adopting error correction code.

Project description:RFID technology has become popular in many applications; however, most of the RFID products lack security related functionality due to the hardware limitation of the low-cost RFID tags. In this paper, we propose a lightweight mutual authentication protocol adopting error correction code for RFID. Besides, we also propose an advanced version of our protocol to provide key updating. Based on the secrecy of shared keys, the reader and the tag can establish a mutual authenticity relationship. Further analysis of the protocol showed that it also satisfies integrity, forward secrecy, anonymity, and untraceability. Compared with other lightweight protocols, the proposed protocol provides stronger resistance to tracing attacks, compromising attacks and replay attacks. We also compare our protocol with previous works in terms of performance.

| S-EPMC4052535 | biostudies-other

A Novel Lightweight Authentication Scheme for RFID-Based Healthcare Systems.

Project description:The Internet of Things (IoT) has been integrated into legacy healthcare systems for the purpose of improving healthcare processes. As one of the key technologies of IoT, radio frequency identification (RFID) technology has been applied to offer services like patient monitoring, drug administration, and medical asset tracking. However, people have concerns about the security and privacy of RFID-based healthcare systems, which require a proper solution. To solve the problem, recently in 2019, Fan et al. proposed a lightweight RFID authentication scheme in the IEEE Network. They claimed that their scheme can resist various attacks in RFID systems with low implementation cost, and thus is suitable for RFID-based healthcare systems. In this article, our contributions mainly consist of two parts. First, we analyze the security of Fan et al.'s scheme and find out its security vulnerabilities. Second, we propose a novel lightweight authentication scheme to overcome these security weaknesses. The security analysis shows that our scheme can satisfy the necessary security requirements. Besides, the performance evaluation demonstrates that our scheme is of low cost. Thus, our scheme is well-suited for practical RFID-based healthcare systems.

| S-EPMC7506697 | biostudies-literature

Mutual Authentication Protocol for D2D Communications in a Cloud-Based E-Health System.

Project description:The development of the Internet of Things (IoT) predicts several new applications, some of which are designed to be incorporated into e-health systems, and some technologies, like cloud computing and device-to-device communication (D2D), are promising for use in the support of resource-constrained devices employed in Mobile-health (m-health) and Telecare Medicine Information Systems (TMIS). In a scenario with billions of devices predicted for the IoT, it is essential to avoid performance and security problems, among others. Security is fundamental for the achievement of optimal performance regarding the sensibility of e-health shared data and, especially, the anonymity of patients and other entities, while it is also essential to consider the scarcity of bandwidth in wireless networks. This paper proposes a new mutual authentication protocol for m-health systems, which supports D2D communication, ensuring security and surpassing the performance and security of other authentication procedures reported in the literature.

| S-EPMC7181216 | biostudies-literature

A novel RFID multi-tag anti-collision protocol for dynamic vehicle identification.

Project description:In order to obtain the information of the vehicle tags in adverse traffic conditions, we proposed a novel reservation framework named reservation to cancel idle-dynamic frame slotted ALOHA (RTCI-DFSA) algorithm. Firstly, the framework employed reservation mechanism to remove idle slot, and thus improve the system identification efficiency. Secondly, the vehicle information was identified by the tag serialization polling identification method. The experimental results showed that the proposed RTCI-DFSA algorithm performed better than the traditional frame slotted ALOHA (FSA) and dynamic frame slotted ALOHA (DFSA) algorithms. More specifically, the tag loss rate of the proposed framework is significantly lower than the frame length fixed and conventional dynamic vehicle identification algorithms. In addition, the experimental results demonstrated that the throughput rate of the proposed algorithm increased from 0.368 to 0.6. Besides, the identification efficiency and applicability of the proposed framework were both higher than other tag identification algorithms.

| S-EPMC6611607 | biostudies-literature

Improved anonymity preserving three-party mutual authentication key exchange protocol based on chaotic maps.

Project description:Three-party authentication key exchange is a protocol that allows two users to set up a session key for encrypted communication by the help of a trusted remote server. Providing user anonymity and mutual authentication in the authentication key exchange is important security requirements to protect users' privacy and enhance its security performance. Recently Li proposed a chaotic maps-based authentication key exchange protocol which attempts to provide mutual authentication and user anonymity, but we found that there were some faults in the key exchange phase and password change phase of his scheme. We prove that Li's scheme does not provide user anonymity and that the user's privacy information is disclosed, and propose enhanced three-party authentication key exchange protocol that provides user anonymity and we analyse its security properties and verify its validity based on BAN logic and AVISPA tool.

| S-EPMC9481006 | biostudies-literature

Adaptive and dynamic RFID tag anti-collision based on secant iteration.

Project description:Radio frequency identification (RFID) has recently experienced unprecedented development. Among many other areas, it has been widely applied in blood station management, automatic supermarket checkout, and logistics. In the application of RFID for large-scale passive tags, tag collision is inevitable owing to the non-cooperation mechanism among tags. Therefore, a tag anti-collision method is a key factor affecting the identification efficiency. In this paper, we propose a tag anti-collision method based on Aloha technology for RFID. It estimates the number of remaining tags using the secant iteration method. To achieve optimal identification efficiency, it adaptively and dynamically adjusts the lengths of the subsequent frames according to the principle that the length of a frame should be the same as the number of tags to be identified. For pseudo-solutions of tag population estimation while using secant iteration, we present an elimination method by two probing frames. The simulation results show that the estimation precision of our method can reach above 97%. Thus, it can meet the requirement of the tag anti-collision estimation accuracy. Its global throughput is obviously superior to the Q algorithm adopted by the current international standard, and it is close to the ideal system. It consequently outperforms existing schemes.

| S-EPMC6281215 | biostudies-literature

An improved and efficient mutual authentication scheme for session initiation protocol.

Project description:Qiu et al. made a security analysis about the protocols of Chaudhry et al. and Kumari et al. in 2018, and they pointed out that there are many security weaknesses in the protocols. To improve the security, Qiu et al. proposed an advanced authentication scheme for Session Initiation Protocol on the basis of the previous protocols and claimed that their own protocol was very secure and practical. However, we demonstrate that the protocol of Qiu et al. has a serious mistake which causes their protocol cannot be executed normally. Beyond that, we also find out that their protocol cannot withstand insider attack and denial service attack. In order to remove these weaknesses, we propose an efficient provably secure mutual authentication scheme. Furthermore, our scheme provides security analysis with the help of Burrows-Abadi-Needham (BAN) logic. Compared with their protocol, ours has greater security and better performance.

| S-EPMC6438602 | biostudies-literature

Cryptanalysis and improved mutual authentication key agreement protocol using pseudo-identity.

Project description:The authentication key agreement is a scheme that generates a session key for encrypted communication between two participants. In the authentication key agreement, to provide the mutual authentication and the robust session key agreement is one of the important security requirements to enhance the security performance of key agreement. Recently Zhou et al. had proposed the key agreement protocol using pseudo-identifiers, but we found that there were weaknesses in their protocol. We have demonstrated that Zhou et al.'s protocol is vulnerable to replay attack, fails to provide mutual authentication, no key control, re-registration with the original identifier and efficiency in the verification of wrong password. We improved their scheme and proposed an improved authentication key agreement protocol that provides robust mutual authentication and the secure session key agreement. We analyzed its security performance using BAN logic and AVISPA tools and compared computational cost, communication overhead and security properties with other related schemes.

| S-EPMC9333255 | biostudies-literature

Flexible Anti-Metal RFID Tag Antenna Based on High-Conductivity Graphene Assembly Film.

Project description:We propose a flexible anti-metal radio frequency identification (RFID) tag antenna based on a high-conductivity graphene assembly film (HCGAF). The HCGAF has a conductivity of 1.82 × 106 S m-1, a sheet resistance of 25 mΩ and a thickness of 22 μm. The HCGAF is endowed with high conductivity comparable to metal materials and superb flexibility, which is suitable for making antennas for microwave frequencies. Through proper structural design, parameter optimization, semiautomatic manufacturing and experimental measurements, an HCGAF antenna could realize a realized gain of -7.3 dBi and a radiation efficiency of 80%, and the tag could achieve a 6.4 m read range at 915 MHz on a 20 × 20 cm2 flat copper plate. In the meantime, by utilizing flexible polyethylene (PE) foam, good conformality was obtained. The read ranges of the tags attached to curved copper plates with different bending radii were measured, as well as those of those attached to several daily objects. All the results demonstrate the excellent performance of the design, which is highly favorable for practical RFID anti-metal applications.

| S-EPMC7926944 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data