Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Synthesis of Non-uniformly Pr-doped SrTiO3 Ceramics and Their Thermoelectric Properties.

ABSTRACT: We demonstrate a novel synthesis strategy for the preparation of Pr-doped SrTiO3 ceramics via a combination of solid state reaction and spark plasma sintering techniques. Polycrystalline ceramics possessing a unique morphology can be achieved by optimizing the process parameters, particularly spark plasma sintering heating rate. The phase and morphology of the synthesized ceramics were investigated in detail using X-ray diffraction, scanning electron microcopy and energy-dispersive X-ray spectroscopy. It was observed that the grains of these bulk Pr-doped SrTiO3 ceramics were enhanced with Pr-rich grain boundaries. Electronic and thermal transport properties were also investigated as a function of temperature and doping concentration. Such a microstructure was found to give rise to improved thermoelectric properties. Specifically, it resulted in a significant improvement in carrier mobility and the thermoelectric power factor. Simultaneously, it also led to a marked reduction in the thermal conductivity. As a result, a significant improvement (> 30%) in the thermoelectric figure of merit was achieved for the whole temperature range over all previously reported maximum values for SrTiO3-based ceramics. This synthesis demonstrates the steps for the preparation of bulk polycrystalline ceramics of non-uniformly Pr-doped SrTiO3.

SUBMITTER: Mehdizadeh Dehkordi A

PROVIDER: S-EPMC4692478 | biostudies-other | 2015 Aug

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Enhancement of thermoelectric properties of La-doped SrTiO3 bulk by introducing nanoscale porosity.

Project description:Electron-doped SrTiO3 is a well-known n-type thermoelectric material, although the figure of merit of SrTiO3 is still inferior compared with p-type metal oxide-based thermoelectric materials due to its high lattice thermal conductivity. In this study, we have used a different amount of the non-ionic surfactant F127 during sample preparation to introduce nanoscale porosities into bulk samples of La-doped SrTiO3. It has been observed that the porosities introduced into the bulk sample significantly improve the Seebeck coefficient and reduce the thermal conductivity by the charge carrier and phonon scattering respectively. Therefore, there is an overall enhancement in the power factor (PF) followed by a dimensionless figure of merit (zT) over a wide scale of temperature. The sample 20 at% La-doped SrTiO3 with 600 mg of F127 surfactant (SLTO 600F127) shows the maximum PF of 1.14 mW m-1 K-2 at 647 K which is 35% higher than the sample without porosity (SLTO 0F127), and the same sample (SLTO 600F127) shows the maximum value of zT is 0.32 at 968 K with an average enhancement of 62% in zT in comparison with the sample without porosity (SLTO 0F127).

| S-EPMC6837226 | biostudies-literature

TiO2-SrTiO3 Biphase Nanoceramics as Advanced Thermoelectric Materials.

Project description:The review embraces a number of research papers concerning the fabrication of oxide thermoelectric systems, with TiO2-SrTiO3 biphase ceramics being emphasized. The ceramics is particularly known for a two-dimensional electron gas (2DEG) forming spontaneously on the TiO2/SrTiO3 heterointerface (modulation doping), unlike ordinary 2DEG occurrence on specially fabricated thin film. Such effect is provided by the SrTiO3 conduction band edge being 0.40 and 0.20 eV higher than that for anatase and rutile TiO2, respectively. That is why, in the case of a checkered arrangement of TiO2 and SrTiO3 grains, the united 2D net is probably formed along the grain boundaries with 2DEG occurring there. To reach such conditions, there should be applied novelties in the field of ceramics materials science, because it is important to obtain highly dense material preserving small (nanoscale) grain size and thin interface boundary. The review also discusses some aspects of reactive spark plasma sintering as a promising method of preparing perovskite-oxide TiO2-SrTiO3 thermoelectric materials for high-temperature applications.

| S-EPMC6766282 | biostudies-literature

Enhanced thermoelectric performance of Nb-doped SrTiO3 by nano-inclusion with low thermal conductivity.

Project description:Authors reported an effective path to increase the electrical conductivity while to decrease the thermal conductivity, and thus to enhance the ZT value by nano-inclusions. By this method, the ZT value of Nb-doped SrTiO3 was enhanced 9-fold by yttria stabilized zirconia (YSZ) nano-inclusions. YSZ inclusions, located inside grain and in triple junction, can reduce the thermal conductivity by effective interface phonon scattering, enhance the electrical conductivity by promoting the abnormal grain growth, and thus lead to the obvious enhancement of ZT value, which strongly suggests that, it is possible to not only reduce the thermal conductivity, but also increase the electrical conductivity by nano-inclusions with low thermal conductivity. This study will give some useful enlightenment to the preparation of high-performance oxide thermoelectric materials.

| S-EPMC3856403 | biostudies-other

Thermoelectric Properties of Hot-Pressed Bi-Doped n-Type Polycrystalline SnSe.

Project description:ᅟ: We report on the successful preparation of Bi-doped n-type polycrystalline SnSe by hot-press method. We observed anisotropic transport properties due to the (h00) preferred orientation of grains along the pressing direction. The electrical conductivity perpendicular to the pressing direction is higher than that parallel to the pressing direction, 12.85 and 6.46 S cm-1 at 773 K for SnSe:Bi 8% sample, respectively, while thermal conductivity perpendicular to the pressing direction is higher than that parallel to the pressing direction, 0.81 and 0.60 W m-1 K-1 at 773 K for SnSe:Bi 8% sample, respectively. We observed a bipolar conducting mechanism in our samples leading to n- to p-type transition, whose transition temperature increases with Bi concentration. Our work addressed a possibility to dope polycrystalline SnSe by a hot-pressing process, which may be applied to module applications.Highlights1. We have successfully achieved Bi-doped n-type polycrystalline SnSe by the hot-press method. 2. We observed anisotropic transport properties due to the [h00] preferred orientation of grains along pressing direction. 3. We observed a bipolar conducting mechanism in our samples leading to n- to p-type transition.

| S-EPMC6035122 | biostudies-literature

Thermoelectric Properties of Pristine Graphyne and the BN-Doped Graphyne Family.

Project description:In this paper, we have investigated the thermoelectric properties of BN-doped graphynes and compared them with respect to their pristine counterpart using first-principles calculations. The effect of temperature on the thermoelectric properties has also been explored. Pristine γ-graphyne is an intrinsic band gap semiconductor and the band gap significantly increases due to the incorporation of boron and nitrogen atoms into the system, which simultaneously results in high electrical conductivity, a large Seebeck coefficient, and low thermal conductivity. The Seebeck coefficient for all these systems is significantly higher than that of conventional thermoelectric materials, suggesting their potential in thermoelectric applications. Among all the considered systems, the "graphyne-like BN sheet" has the highest electrical conductance and lowest thermal conductance, ensuring its superiority in thermoelectric properties over the other studied systems. We find that a maximum full ZT of ∼6 at room temperature is accessible in the "graphyne-like BN sheet".

| S-EPMC8358946 | biostudies-literature

Dielectric properties of Y and Nb co-doped TiO<sub>2</sub> ceramics.

Project description:In this work, the (Y0.5Nb0.5)xTi1-xO2 (x?=?0.001, 0.01, 0.02, 0.04, 0.06 and 0.1) ceramics (as called YNTO) were fabricated by synthesized through a standard solid-state reaction. As revealed by the X-ray diffraction (XRD) spectra, the YNTOs exhibit tetragonal rutile structure. Meanwhile, the grain size of YNTO ceramics increased and then decreased with the increase of x value, and the largest value reached when x?=?0.02. All the YNTO samples display colossal permittivity (~102-105) over a wide temperature and frequency range. Moreover, the optimal ceramic, (Y0.5Nb0.5)0.02Ti0.98O2, exhibits high performance over a broad temperature range from 20?°C to 180?°C; specifically, at 1?kHz, the dielectric constant and dielectric loss are 6.55?×?104 and 0.22 at room temperature, and they are 1.03?×?105 and 0.11 at 180?°C, respectively.

| S-EPMC5561205 | biostudies-literature

Synthesis and characterization of vacancy-doped neodymium telluride for thermoelectric applications.

Project description:Thermoelectric materials exhibit a voltage under an applied thermal gradient and are the heart of radioisotope thermoelectric generators (RTGs), which are the main power system for space missions such as Voyager I, Voyager II, and the Mars Curiosity rover. However, materials currently in use enable only modest thermal-to-electrical conversion efficiencies near 6.5% at the system level, warranting the development of material systems with improved thermoelectric performance. Previous work has demonstrated large thermoelectric figures of merit for lanthanum telluride (La3-x Te4), a high-temperature n-type material, achieving a peak zT value of 1.1 at 1275 K at an optimum cation vacancy concentration. Here we present an investigation of the thermoelectric properties of neodymium telluride (Nd3-x Te4), another rare-earth telluride with a similar structure to La3-x Te4. Density functional theory (DFT) calculations predicted a significant increase in the Seebeck coefficient over La3-x Te4 at equivalent vacancy concentrations due to an increased density of states (DOS) near the Fermi level from the 4f electrons of Nd. The high temperature electrical resistivity, Seebeck coefficient, and thermal conductivity were measured for Nd3-x Te4 at various carrier concentrations. These measurements were compared to La3-x Te4 in order to elucidate the impact of the four 4f electrons of Nd on the transport properties of Nd3-x Te4. A zT of 1.2 was achieved at 1273 K for Nd2.78Te4, which is a 10% improvement over that of La2.74Te4.

| S-EPMC6961965 | biostudies-literature

Thermoelectric Properties of Highly-Crystallized Ge-Te-Se Glasses Doped with Cu/Bi.

Project description:Chalcogenide semiconducting systems are of growing interest for mid-temperature range (~500 K) thermoelectric applications. In this work, Ge20Te77Se₃ glasses were intentionally crystallized by doping with Cu and Bi. These effectively-crystallized materials of composition (Ge20Te77Se₃)100-xMx (M = Cu or Bi; x = 5, 10, 15), obtained by vacuum-melting and quenching techniques, were found to have multiple crystalline phases and exhibit increased electrical conductivity due to excess hole concentration. These materials also have ultra-low thermal conductivity, especially the heavily-doped (Ge20Te77Se₃)100-xBix (x = 10, 15) samples, which possess lattice thermal conductivity of ~0.7 Wm-1 K-1 at 525 K due to the assumable formation of nano-precipitates rich in Bi, which are effective phonon scatterers. Owing to their high metallic behavior, Cu-doped samples did not manifest as low thermal conductivity as Bi-doped samples. The exceptionally low thermal conductivity of the Bi-doped materials did not, alone, significantly enhance the thermoelectric figure of merit, zT. The attempt to improve the thermoelectric properties by crystallizing the chalcogenide glass compositions by excess doping did not yield power factors comparable with the state of the art thermoelectric materials, as these highly electrically conductive crystallized materials could not retain the characteristic high Seebeck coefficient values of semiconducting telluride glasses.

| S-EPMC5506923 | biostudies-literature

The thermoelectric properties of Au nanoparticle-incorporated Al-doped mesoporous ZnO thin films.

Project description:Mesoporous Al-doped ZnO thin films incorporated with gold nanoparticles (Au NPs) were synthesized using a sol-gel and evaporation-induced self-assembly process. In this study, the complementary effects of Au NP incorporation and Al doping on the thermoelectric properties of mesoporous ZnO thin films were analysed. The incorporated Au NPs induced an increase in electrical conductivity but a detriment in the pore arrangement of the mesoporous ZnO thin film, which was accompanied by a decrease in porosity. However, the addition of the Al dopant minimized the pore structural collapse because of the inhibition of the grain growth in the ZnO skeletal structure, resulting in the enhancement of the pore arrangement and porosity. When the Au NPs and Al dopant were added at the same time, the degradation in the pore structure was minimized and the electrical conductivity was effectively increased, but the absolute value of the Seebeck coefficient was decreased. However, as a result, the thermoelectric power factor was increased by 2.4 times compared to that of the pristine mesoporous ZnO thin film. It was found that co-introducing the Au NPs and Al doping to the mesoporous ZnO structure was effective in preserving the pore structure and increasing the electric conductivity, thereby enhancing the thermoelectric property of the mesoporous ZnO thin film.

| S-EPMC6549978 | biostudies-literature

Enhanced thermoelectric properties of lightly Nb doped SrTiO<sub>3</sub> thin films.

Project description:Novel thermoelectric materials developed for operation at room temperature must have similar or better performance along with being as ecofriendly as those commercially used, e.g., Bi2Te3, in terms of their toxicity and cost. In this work, we present an in-depth study of the thermoelectric properties of epitaxial Nb-doped strontium titanate (SrTi1-x Nb x O3) thin films as a function of (i) doping concentration, (ii) film thickness and (iii) substrate type. The excellent crystal quality was confirmed by high resolution transmission electron microscopy and X-ray diffraction analysis. The thermoelectric properties were measured by the three-omega method (thermal conductivity) and van der Pauw method (electrical resistivity), complemented by Seebeck coefficient measurements. A maximum power factor of 8.9 × 10-3 W m-1 K-2 and a thermoelectric figure of merit of 0.49 were measured at room temperature in 50 nm-thick films grown on lanthanum strontium aluminate. The mechanisms behind this high figure of merit are discussed in terms of a possible two-dimensional electron gas, increase of the effective mass of the electrons, electron filtering and change in strain due to different substrates. The overall enhancement of the thermoelectric properties suggests that SrTi1-x Nb x O3 is a very promising n-type candidate for room- to high-temperature applications.

| S-EPMC9419777 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data