Tunable high quality factor in two multimode plasmonic stubs waveguide.
Ontology highlight
ABSTRACT:
SUBMITTER: Chen Z
PROVIDER: S-EPMC4830990 | biostudies-other | 2016 Apr
REPOSITORIES: biostudies-other
Similar Datasets
Project description:The quality (Q) factor and tunability of electromagnetically induced transparency (EIT)-like effect in plasmonic systems are restrained by the intrinsic loss and weak adjustability of metals, limiting the performance of the devices including optical sensor and storage. Exploring new schemes to realize the high Q-factor and tunable EIT-like effect is particularly significant in plasmonic systems. Here, we present an ultrahigh Q-factor and flexibly tunable EIT-like response in a novel plasmonic system. The results illustrate that the induced transparency distinctly appears when surface plasmon polaritons excited on the metal satisfy the wavevector matching condition with the guided mode in the high-refractive index (HRI) layer. The Q factor of the EIT-like spectrum can exceed 2000, which is remarkable compared to that of other plasmonic systems such as plasmonic metamaterials and waveguides. The position and lineshape of EIT-like spectrum are strongly dependent on the geometrical parameters. An EIT pair is generated in the splitting absorption spectra, which can be easily controlled by adjusting the incident angle of light. Especially, we achieve the dynamical tunability of EIT-like spectrum by changing the Fermi level of graphene inserted in the system. Our results will open a new avenue toward the plasmonic sensing, spectral shaping and switching.
| S-EPMC5784153 | biostudies-literature
Project description:Coupled resonator optical waveguides (CROWs) have the potential to revolutionise integrated optics, to slow-light and enhance linear and non-linear optical phenomena. Here we exploit the broad resonances and subwavelength nature of localized surface plasmons in a compact CROW design where plasmonic nanoparticles are side coupled to a dielectric waveguide. The plasmonic CROW features a low loss central mode with a highly tunable dispersion, that avoids coupling to the plasmonic nanoparticles close to the band-edge. We show that this low loss character is preserved in finite plasmonic CROWs giving rise to Fabry-Perot type resonances that have high quality factors of many thousands, limited only by the CROW length. Furthermore we demonstrate that the proposed CROW design is surprisingly robust to disorder. By varying the geometric parameters one can not only reduce the losses into dissipative or radiative channels but also control the outcoupling of energy to the waveguide. The ability to minimise loss in plasmonic CROWs while maintaining dispersion provides an effective cavity design for chip-integrated laser devices and applications in linear and non-linear nano-photonics.
| S-EPMC4668557 | biostudies-other
Project description:We propose a nanoplasmonic waveguide side-coupled with bright-dark-dark resonators in our paper. A multi-oscillator theory derived from the typical two-oscillator model, is established to describe spectral features as well as slow-light effects in bright-dark-dark structures, and confirmed by the finite-difference time domain (FDTD). That a typical plasmon induced transparency (PIT) turns to double PIT spectra is observed in this waveguide structure. At the same time, multi-switching effects with obvious double slow-light bands based on double PIT are also discovered in our proposed structure. What's more, dynamically tuning the multi-switching is achieved by means of filling Fabry-Perot resonators with the Kerr nonlinear material Ag-BaO. These results may have applications in all-optical devices, moreover, the multi-oscillator theory may play a guiding role in designing plasmonic devices.
| S-EPMC4625373 | biostudies-other
Project description:Next-generation optoelectronic devices and photonic circuitry will have to incorporate on-chip compatible nanolaser sources. Semiconductor nanowire lasers have emerged as strong candidates for integrated systems with applications ranging from ultrasensitive sensing to data communication technologies. Despite significant advances in their fundamental aspects, the integration within scalable photonic circuitry remains challenging. Here we report on the realization of hybrid photonic devices consisting of nanowire lasers integrated with wafer-scale lithographically designed V-groove plasmonic waveguides. We present experimental evidence of the lasing emission and coupling into the propagating modes of the V-grooves, enabling on-chip routing of coherent and subdiffraction confined light with room-temperature operation. Theoretical considerations suggest that the observed lasing is enabled by a waveguide hybrid photonic-plasmonic mode. This work represents a major advance toward the realization of application-oriented photonic circuits with integrated nanolaser sources.
| S-EPMC5301279 | biostudies-literature
Project description:The unique optical and electronic properties of graphene make possible the fabrication of novel optoelectronic devices. One of the most exciting graphene characteristics is the tunability by gating which allows one to realize active optical devices. While several types of graphene-based photonic modulators have already been demonstrated, the potential of combining the versatility of graphene with subwavelength field confinement of plasmonic waveguides remains largely unexplored. Here we report fabrication and study of hybrid graphene-plasmonic waveguide modulators. We consider several types of modulators and identify the most promising one for telecom applications. The modulator working at the telecom range is demonstrated, showing a modulation depth of >0.03 dB μm(-1) at low gating voltages for an active device area of just 10 μm(2), characteristics which are already comparable to those of silicon-based waveguide modulators while retaining the benefit of further device miniaturization. Our proof-of-concept results pave the way towards on-chip realization of efficient graphene-based active plasmonic waveguide devices for optical communications.
| S-EPMC5227092 | biostudies-literature
Project description:Graphene has attracted much attention for the realization of high-speed photodetection for silicon photonics over a wide wavelength range. However, the reported fast graphene photodetectors mainly operate in the 1.55??m wavelength band. In this work, we propose and realize high-performance waveguide photodetectors based on bolometric/photoconductive effects by introducing an ultrathin wide silicon-graphene hybrid plasmonic waveguide, which enables efficient light absorption in graphene at 1.55??m and beyond. When operating at 2??m, the present photodetector has a responsivity of ~70?mA/W and a setup-limited 3?dB bandwidth of >20?GHz. When operating at 1.55??m, the present photodetector also works very well with a broad 3?dB bandwidth of >40?GHz (setup-limited) and a high responsivity of ~0.4?A/W even with a low bias voltage of -0.3?V. This work paves the way for achieving high-responsivity and high-speed silicon-graphene waveguide photodetection in the near/mid-infrared ranges, which has applications in optical communications, nonlinear photonics, and on-chip sensing.
| S-EPMC7048841 | biostudies-literature
Project description:Precisely tailored plasmonic substrates can provide a platform for a variety of enhanced plasmonic applications in sensing and imaging. Despite the significant advances made in plasmonics, most plasmonic devices suffer critically from intrinsic absorption losses at optical frequencies, fatally restricting their efficiency. Here, we describe and engineer plasmonic substrates based on metal-insulator-metal (MIM) plasmon resonances with ultra-sharp optical transmission responses. Due to their sharp transmission spectrum, the proposed substrates can be utilized for high quality (Q)-factor multi-functional plasmonic applications. Analytical and numerical methods are exploited to investigate the optical properties of the substrates. The optical response of the substrate can be tuned by adjusting the periodicity of the nanograting patterned on the substrate. Fabricated substrates present Q-factors as high as ?40 and refractive index sensing of the surrounding medium as high as 1245?nm/RIU. Our results indicate that by engineering the substrate geometry, the dielectric thickness and incident angle, the radiation losses can be greatly diminished, thus enabling the design of plasmonic substrates with large Q factor and strong sensitivity to the environment.
| S-EPMC5700073 | biostudies-literature
Project description:Parity-time-symmetric (-symmetric) optical waveguide couplers offer new possibilities for fast, ultracompact, configurable, all-optical signal processing. Here, we study nonlinear properties of finite-size multimode -symmetric couplers and predict the nonlinear oscillatory dynamics that can be controlled by three parameters: input light intensity, gain and loss amplitude, and input beam profile. Moreover, we show that this dynamics is driven by a transition triggered by nonlinearity in these structures, and we demonstrate that with the increase of the number of dimers in the system, the transition threshold decreases and converges to the value corresponding to an infinite array. Finally, we present a variety of periodic intensity patterns that can be formed in these couplers depending on the initial excitation.
| S-EPMC4735683 | biostudies-literature
Project description:Terahertz (THz) band is considered to be the next frontier in wireless communications. The emerging THz multiplexing techniques are expected to dramatically increase the information capacity of THz communications far beyond a single channel limit. In this work, we explore the THz frequency-division multiplexing modality enabled by an add-drop multiplexer (ADM) design. Based on modular two-wire plasmonic waveguides fabricated using additive manufacturing and metallization techniques, we demonstrate four-port THz ADMs containing grating-loaded side couplers for operation at ~140 GHz carrier frequency. Particular attention is paid to the design of plasmonic waveguide Bragg gratings and directional couplers capable of splitting broadband THz light into spectral and spatial domains. Finally, we demonstrate multi/demultiplexing of THz signals with bit rates up to 6 Gbps using the developed ADMs. We believe that the proposed plasmonic circuits hold strong potential to provide robust integrated solutions for analog signal processing in the upcoming THz communications.
| S-EPMC9283530 | biostudies-literature
Project description:Graphene distinguishes itself as a promising candidate for realizing tunable integrated photonic devices with high flexibility. We propose a set of ultracompact tunable on-chip waveguide couplers with mode-selectivity and polarization sensitivity around the telecom wavelength of 1.55 μm, under the configuration of graphene-laminated silicon waveguides patterned with gold nanoantennas. Versatile couplings can be achieved in a widely tunable fashion within a deep-subwavelength area (210 × 210 nm2), by marrying the advantages of tight field confinement in plasmonic antennas and the largely tunable carrier density of graphene. Incident light signals can be selectively coupled into different fundamental modes with good mode quality and high directionality exceeding 25 dB. Design scenarios for asymmetric couplings are presented, where the operation wavelength can be tuned across a 107-nm range around 1.55 mm by altering the chemical potential of graphene from 0 to 1.8 eV. Furthermore, the proposed schemes can be leveraged as mode-sensitive on-chip directional waveguide signal detectors with an extinction ratio over 10 dB. Our results provide a new paradigm upon graphene-assisted tunable integrated photonic applications.
| S-EPMC6127104 | biostudies-literature