Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Refinement and growth enhancement of Al2Cu phase during magnetic field assisting directional solidification of hypereutectic Al-Cu alloy.

ABSTRACT: Understanding how the magnetic fields affect the formation of reinforced phase during solidification is crucial to tailor the structure and therefor the performance of metal matrix in situ composites. In this study, a hypereutectic Al-40 wt.%Cu alloy has been directionally solidified under various axial magnetic fields and the morphology of Al2Cu phase was quantified in 3D by means of high resolution synchrotron X-ray tomography. With rising magnetic fields, both increase of Al2Cu phase's total volume and decrease of each column's transverse section area were found. These results respectively indicate the growth enhancement and refinement of the primary Al2Cu phase in the magnetic field assisting directional solidification. The thermoelectric magnetic forces (TEMF) causing torque and dislocation multiplication in the faceted primary phases were thought dedicate to respectively the refinement and growth enhancement. To verify this, a real structure based 3D simulation of TEMF in Al2Cu column was carried out, and the dislocations in the Al2Cu phase obtained without and with a 10T high magnetic field were analysed by the transmission electron microscope.

SUBMITTER: Wang J

PROVIDER: S-EPMC4835779 | biostudies-other | 2016 Apr

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Effects of an Alternating Magnetic Field/Ag Multi-Alloying Combined Solidification Process on Cu?14Fe Alloy.

Project description:An alternating magnetic field (AMF)/Ag multi-alloying combined process was applied to the solidification of Cu?14Fe alloy to study its effects on the microstructure and properties of the resulting samples. The applied AMF and Ag multi-alloying had positive effects on the refinement of the primary Fe phase and precipitation of Fe solute atoms, respectively. These results indicated that the combined AMF/Ag multi-alloying process was effective to improve the distribution of the primary Fe phase and reduce the Fe content of the Cu matrix, which increased the conductivity of the alloy. The application of the combined AMF/Ag multi-alloying process to the solidification of Cu?Fe alloy provided samples with improved comprehensive properties compared with those of samples solidified using a single process (AMF or Ag multi-alloying).

| S-EPMC6317173 | biostudies-other

On migration of primary/peritectic interface during interrupted directional solidification of Sn-Ni peritectic alloy.

Project description:The migration of the primary/peritectic interface in local isothermal condition is observed in dendritic structure of Sn-Ni peritectic alloy after experiencing interrupted directional solidification. It was observed that this migration of primary Ni3Sn2/peritectic Ni3Sn4 interface towards the primary Ni3Sn2 phase was accompanied by migration of liquid film located at this interface. The migration velocity of this interface was confirmed to be much faster than that of peritectic transformation, so this migration was mostly caused by superheating of primary Ni3Sn2 phase below TP, leading to nucleation and migration of liquid film at this interface. This migration can be classified as a kind of liquid film migration (LFM), and the migration velocity at the horizontal direction has been confirmed to be much faster than that along the direction of temperature gradient. Analytical prediction has shown that the migration of liquid film could be divided into two stages depending on whether primary phase exists below TP. If the isothermal annealing time is not long enough, both the liquid film and the primary/peritectic interface migrate towards the primary phase until the superheated primary phase has all been dissolved. Then, this migration process towards higher temperature is controlled by temperature gradient zone melting (TGZM).

| S-EPMC4830927 | biostudies-literature

Precipitation of a new platelet phase during the quenching of an Al-Zn-Mg-Cu alloy.

Project description:A previously undescribed high aspect ratio strengthening platelet phase, herein named the Y-phase, has been identified in a commercial Al-Zn-Mg-Cu alloy. Differential scanning calorimetry indicates that this phase only precipitates at temperature and cooling rate of about 150-250 °C and 0.05-300 K/s, respectively. This precipitate is shown to be responsible for a noticeable improvement in mechanical properties. Aberration corrected scanning transmission electron microscopy demonstrates the minimal thickness (~1.4 nm) precipitate plates are isostructural to those of the T1 (Al2CuLi) phase observed in Al-Cu-Li alloys. Low voltage chemical analysis by energy dispersive X-ray spectroscopy and electron energy loss spectroscopy gives evidence of the spatial partitioning of the Al, Cu and Zn within the Y-phase, as well as demonstrating the incorporation of a small amount of Mg.

| S-EPMC4793252 | biostudies-literature

Solute trapping in Al-Cu alloys caused by a 29 Tesla super high static magnetic field.

Project description:Solidification of Al-Cu alloys has been investigated using a 29 Tesla super high static magnetic field (SHSMF). The results show that, by imposing a 29 Tesla SHSMF, the size of primary phases and spacing of eutectic structure have been refined through the increase of undercooling which results from the suppression of diffusion coefficient. The diffusion coefficient of atoms in the liquid matrix decreases to be about 1.2 × 10-12 m2/s. The lattice constants are reduced and high dislocation density forms in the primary phase, which induces a solute trapping effects. The spacing of (110) plane in Al2Cu is corrected to be 4.3123 Å and 4.2628 Å for Al-40 wt.%Cu alloys treated without and with a SHSMF. The spacing of (111) plane in Al is corrected to be 2.3351 Å and 2.3258 Å for Al-26 wt.%Cu alloys treated without and with a SHSMF. The compression yield strength has been improved by about 42% from 268 MPa to 462 MPa for Al-26 wt.%Cu and 42.5% from 248 MPa to 431 MPa for Al-40 wt.%Cu. The maximum elastic strain increases from about 2% to 4.3% for Al-26 wt.%Cu and from 2% to 4% for Al-40 wt.%Cu. It is expected that SHSMF is beneficial to process materials with high mechanical properties.

| S-EPMC6342920 | biostudies-literature

Improvement in creep life of a nickel-based single-crystal superalloy via composition homogeneity on the multiscales by magnetic-field-assisted directional solidification.

Project description:The improvement of the creep properties of single-crystal superalloys is always strongly motivated by the vast growing demand from the aviation, aerospace, and gas engine. In this study, a static magnetic-field-assisted solidification process significantly improves the creep life of single-crystal superalloys. The mechanism originates from an increase in the composition homogeneity on the multiscales, which further decreases the lattice misfit of γ/γ' phases and affects the phase precipitation. The phase-precipitation change is reflected as the decrease in the γ' size and the contents of carbides and γ/γ' eutectic, which can be further verified by the variation of the cracks number and raft thickness near the fracture surface. The variation of element partition decreases the dislocation quantity within the γ/γ' phases of the samples during the crept deformation. Though the magnetic field in the study destroys the single-crystal integrity, it does not offset the benefits from the compositional homogeneity. The proposed means shows a great potential application in industry owing to its easy implement. The uncovered mechanism provides a guideline for controlling microstructures and mechanical properties of alloys with multiple components and multiple phases using a magnetic field.

| S-EPMC5780385 | biostudies-literature

Study on the grain refinement mechanism of Mg-Al alloy based on carbon addition.

Project description:In this study, a comprehensive treatment process based on the rotary injection of Ar+CO2 Mg-Al alloy melt is proposed. The effect of carbon on the grain refinement of Mg-Al alloy is studied according to the proposed integrated treatment process. The regularity of carbon refinement in the Mg-Al alloy is examined by microstructural observation and theoretical calculation. The results show that carbon has no effect on the grain refinement of Mg-Al alloy when the Al content is less than 1wt.%. However, when the Al content reaches 2 wt.%, the refining effect is obvious, and the grain refinement efficiency is 62%. The refining effect increases with the increase in the Al content, and the refinement efficiency becomes 79% when the Al content reaches 9 wt.%. The size of Al-C-O in the matrix is approximately 5μm, which confirms the existence of Al4C3 phase exists as a heterogeneous nucleating agent. The theoretical calculations suggest that the Al4C3 heterogeneous nucleating agent cannot be formed when the Al content in the Mg alloy is less than 1.34%, so there is no thinning effect under such Al content. The crystallographic calculations reveal that the mismatch between the Al4C3 phase and Mg alloy matrix is only 4.05%, and Al4C3 can exist as a heterogeneous nucleating agent for α-Mg phase. Combining the measured solidification curves with the classical nucleation theory, the wetting angle of Mg-Al alloy on Al4C3 is calculated to be 24.3°.

| S-EPMC9352047 | biostudies-literature

Direct observation of grain rotations during coarsening of a semisolid Al-Cu alloy.

Project description:Sintering is a key technology for processing ceramic and metallic powders into solid objects of complex geometry, particularly in the burgeoning field of energy storage materials. The modeling of sintering processes, however, has not kept pace with applications. Conventional models, which assume ideal arrangements of constituent powders while ignoring their underlying crystallinity, achieve at best a qualitative description of the rearrangement, densification, and coarsening of powder compacts during thermal processing. Treating a semisolid Al-Cu alloy as a model system for late-stage sintering-during which densification plays a subordinate role to coarsening-we have used 3D X-ray diffraction microscopy to track the changes in sample microstructure induced by annealing. The results establish the occurrence of significant particle rotations, driven in part by the dependence of boundary energy on crystallographic misorientation. Evidently, a comprehensive model for sintering must incorporate crystallographic parameters into the thermodynamic driving forces governing microstructural evolution.

| S-EPMC5068287 | biostudies-literature

The Refining Mechanism of Super Gravity on the Solidification Structure of Al-Cu Alloys.

Project description:There is far less study of the refining effect of super gravity fields on solidification structures of metals than of the effects of electrical currents, magnetic and ultrasonic fields. Moreover, the refining mechanisms of super gravity are far from clear. This study applied a super gravity field to Al-Cu alloys to investigate its effect on refining their structures and the mechanism of interaction. The experimental results showed that the solidification structure of Al-Cu alloys can be greatly refined by a super gravity field. The major refining effect was mainly achieved when super gravity was applied at the initial solidification stage; only slight refinement could be obtained towards the end of solidification. No refinement was obtained by the super gravity treatment on pure liquid or solid stages. The effectiveness of super gravity results from its promoting the multiplication of crystal nuclei, which we call "Heavy Crystal Rain", thereby greatly strengthening the migration of crystal nuclei within the alloy. Increasing the solute Cu content can increase nucleation density and restrict the growth of crystals, which further increases the refining effect of super gravity. Within this paper, we also discuss the motile behavior of crystals in a field of super gravity.

| S-EPMC5457018 | biostudies-other

Influence of Homogenization on Microstructural Response and Mechanical Property of Al-Cu-Mn Alloy.

Project description:The evolution of the microstructures and properties of large direct chill (DC)-cast Al-Cu-Mn alloy ingots during homogenization was investigated. The results revealed that the Al-Cu-Mn alloy ingots had severe microsegregation and the main secondary phase was Al₂Cu, with minimal Al₇Cu₂Fe phase. Numerous primary eutectic phases existed in the grain boundary and the main elements were segregated at the interfaces along the interdendritic region. The grain boundaries became discontinuous, residual phases were effectively dissolved into the matrix, and the segregation degree of all elements was reduced dramatically during homogenization. In addition, the homogenized alloys exhibited improved microstructures with finer grain size, higher number density of dislocation networks, higher density of uniformly distributed θ' or θ phase (Al₂Cu), and higher volume fraction of high-angle grain boundaries compared to the nonhomogenized samples. After the optimal homogenization scheme treated at 535 °C for 10 h, the tensile strength and elongation% were about 24 MPa, 20.5 MPa, and 1.3% higher than those of the specimen without homogenization treatment.

| S-EPMC6025167 | biostudies-literature

Degenerate seaweed to tilted dendrite transition and their growth dynamics in directional solidification of non-axially oriented crystals: a phase-field study.

Project description:We report the results of a phase-field study of degenerate seaweed to tilted dendrite transition and their growth dynamics during directional solidification of a binary alloy. Morphological selection maps in the planes of (G, Vp) and (ε4, Vp) show that lower pulling velocity, weaker anisotropic strength and higher thermal gradient can enhance the formation of the degenerate seaweed. The tip undercooling shows oscillations in seaweed growth, but it keeps at a constant value in dendritic growth. The M-S instability on the tips and the surface tension anisotropy of the solid-liquid interface are responsible for the formation of the degenerate seaweed. It is evidenced that the place where the interfacial instability occurs determines the morphological transition. The transient transition from degenerate seaweed to tilted dendrite shows that dendrites are dynamically preferred over seaweed. For the tilted dendritic arrays with a large tilted angle, primary spacing is investigated by comparing predicted results with the classical scaling power law, and the growth direction is found to be less sensitive to the pulling velocity and the primary spacing. Furthermore, the effect of the initial interface wavelength on the morphological transition is investigated to perform the history dependence of morphological selection.

| S-EPMC4876405 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data