Dataset Information

Cellulose Isolation Methodology for NMR Analysis of Cellulose Ultrastructure.

ABSTRACT: In order to obtain accurate information about the ultrastructure of cellulose from native biomass by 13C cross polarization magic angle spinning (CP/MAS) NMR spectroscopy the cellulose component must be isolated due to overlapping resonances from both lignin and hemicellulose. Typically, cellulose isolation has been achieved via holocellulose pulping to remove lignin followed by an acid hydrolysis procedure to remove the hemicellulose components. Using 13C CP/MAS NMR and non-linear line-fitting of the cellulose C? region, it was observed that the standard acid hydrolysis procedure caused an apparent increase in crystallinity of ~10% or less on the cellulose isolated from Populus holocellulose. We have examined the effect of the cellulose isolation method, particularly the acid treatment time for hemicellulose removal, on cellulose ultrastructural characteristics by studying these effects on cotton, microcrystalline cellulose (MCC) and holocellulose pulped Populus. 13C CP/MAS NMR of MCC indicated that holocellulose pulping and acid hydrolysis has little effect on the crystalline ultrastructural components of cellulose. Although any chemical method to isolate cellulose from native biomass will invariably alter substrate characteristics, especially those related to regions accessible to solvents, we found those changes to be minimal and consistent in samples of typical crystallinity and lignin/hemicellulose content. Based on the rate of the hemicellulose removal, as determined by HPLC-carbohydrate analysis and magnitude of cellulose ultrastructural alteration, the most suitable cellulose isolation methodology utilizes a treatment of 2.5 M HCl at 100 °C for a standard residence time between 1.5 and 4 h. However, for the most accurate crystallinity results this residence time should be determined empirically for a particular sample.

SUBMITTER: Foston MB

PROVIDER: S-EPMC5448851 | biostudies-other | 2011 Nov

REPOSITORIES: biostudies-other

ACCESS DATA

Publications

Cellulose Isolation Methodology for NMR Analysis of Cellulose Ultrastructure.

Foston Marcus B MB Hubbell Chistopher A CA Ragauskas Art J AJ

Materials (Basel, Switzerland) 20111107 11

In order to obtain accurate information about the ultrastructure of cellulose from native biomass by <sup>13</sup>C cross polarization magic angle spinning (CP/MAS) NMR spectroscopy the cellulose component must be isolated due to overlapping resonances from both lignin and hemicellulose. Typically, cellulose isolation has been achieved via holocellulose pulping to remove lignin followed by an acid hydrolysis procedure to remove the hemicellulose components. Using <sup>13</sup>C CP/MAS NMR and no ...[more]

PMID: 28824119

Similar Datasets

Project description:Softening, a common phenomenon in many fruits, is a well coordinated and genetically determined process. However, the process of flesh softening during ripening has rarely been described in hawthorn. In this study, we found that 'Ruanrou Shanlihong 3 Hao' fruits became softer during ripening, whereas 'Qiu JinXing' fruits remained hard. At late developmental stages, the firmness of 'Ruanrou Shanlihong 3 Hao' fruits rapidly declined, and that of 'Qiu JinXing' fruits remained essentially unchanged. According to transmission electron microscopy, the middle lamella of 'Qiu JinXing' and 'Ruanrou Shanlihong 3 Hao' fruit flesh was largely degraded as the fruits matured. Microfilaments in 'Qiu JinXing' flesh were arranged close together and were deep in color, whereas those in 'Ruanrou Shanlihong 3 Hao' fruit flesh were arranged loosely, partially degraded and light in color. RNA-Seq analysis yielded approximately 46.72 Gb of clean data and 72,837 unigenes. Galactose metabolism and pentose and glucuronate interconversions are involved in cell wall metabolism, play an important role in hawthorn texture. We identified 85 unigenes related to the cell wall between hard- and soft-fleshed hawthorn fruits. Based on data analysis and real-time PCR, we suggest that β-GAL and PE4 have important functions in early fruit softening. The genes Ffase, Gns,α-GAL, PE63, XTH, and CWP, which are involved in cell wall degradation, are responsible for the different textures of hawthorn fruits. Thus, we hypothesize that the different textures of 'Qiu JinXing' and 'Ruanrou Shanlihong 3 Hao' fruits at maturity mainly result from cellulose/hemicelluloses degradation rather than from lamella degradation. Overall, we propose that different types of hydrolytic enzymes in cells interact to degrade the cell wall, resulting in ultramicroscopic Structure changes in the cell wall and, consequently, fruit softening. These results provide fundamental insight regarding the mechanisms by which hawthorn fruits acquire different textures and also lay a solid foundation for further research.

Project description:Background: Microglial isolation and culturing methods continue to be explored to maximize cellular yield, purity, responsiveness to stimulation and similarity to in vivo microglia. This study aims to evaluate different microglia isolation methods — 3 variants of microglia isolation from neonatal mice and 2 variants of microglia isolation from adult mice — on transcriptional profile and response to HMGB1. Methods: Microglia from neonatal mice, age 0-3 days (P0-P3) were isolated from mixed glial cultures (MGC). We included three variations of this protocol that differed by use of GM-CSF in culture (No GM-CSF or 500 pg/mL GM-CSF), and days of culture in MGC before microglial separation (10 or 21). Protocols for studying microglia from adult mice age 6-8 weeks included isolation by adherence properties followed by 7 days of culture with 100 ng/mL GM-CSF and 100 ng/mL M-CSF (Vijaya et al., 2023), or acute isolation using CD11b beads (Bordt et al., 2020). Purity, yield, and RNA quality of the isolated microglia were assessed by flow cytometry, hemocytometer counting, Nanodrop, and Bioanalyzer, respectively. Microglial responsiveness to an inflammatory stimulus, HMGB1, was evaluated by measuring TNFα, IL1β, and IFNβ secretion by ELISA and assessing gene expression patterns using bulk RNA sequencing. Results: All five methods demonstrated greater than 90% purity. Microglia from all cultures increased transcription of or secreted TNFα, IL1β, and IFNβ in response to HMGB1. RNA sequencing showed a larger number of differentially expressed genes in response to HMGB1 treatment in microglia cultured from pups than from adult mice, with sparse changes among the 3 MGC culturing conditions. Conclusion: These findings suggest that while all methods provided high purity, the choice of protocol may significantly influence yield, RNA quality, baseline transcriptional profile and response to stimulation. This comparative study provides valuable insights to inform the choice of microglial isolation and culture method.

Project description:Metal nanomaterials, such as silver and copper, are often incorporated into commercial textiles to take advantage of their Antibacterial and antiviral properties. The goal of this study was to identify the most parsimonious method for the synthesis of silver, copper, or silver/copper bimetallic treated textiles. To accomplish this eight different methods were employed to synthesize silver, copper, and silver/copper functionalized cotton batting textiles. Using silver and copper nitrate as precursors, different reagents were used to initiate/catalyze the deposition of metal, including: (1) no additive, (2) sodium bicarbonate, (3) green tea, (4) sodium hydroxide, (5) ammonia, (6, 7) sodium hydroxide/ammonia at a 1:2 and 1:4 ratio, and (8) sodium borohydride. The use of sodium bicarbonate as a reagent to reduce silver onto cotton has not been used previously in literature and was compared to established methods. All synthesis methods were performed at 80 °C for one hour following textile addition to the solutions. The products were characterized by x-ray fluorescence (XRF) analysis for quantitative determination of the metal content and x-ray absorption near edge structure (XANES) analysis for silver and copper speciation on the textile. Scanning electron microscopy (SEM) with energy dispersive x-ray (EDX) and size distribution inductively coupled plasma mass spectrometry (ICP-MS) were used to further characterize the products of the sodium bicarbonate, sodium hydroxide, and sodium borohydride synthesis methods following ashing of the textile. For the silver treatment methods (1 mM Ag +), sodium bicarbonate and sodium hydroxide resulted in the highest amounts of silver on the textile (8900 mg Ag/kg textile and 7600 mg Ag/kg textile) and for copper treatment (1 mM Cu +) the sodium hydroxide and sodium hydroxide/ammonium hydroxide resulted in the highest amounts of copper on the textile (3800 mg Ag/kg textile and 2500 mg Ag/kg textile). Formation of copper oxide was dependent on the pH of the solution, with 4 mM ammonia and other high pH solutions resulting in majority of the copper on the textile existing as copper oxide, with smaller amounts of ionic-bound copper. The identified parsimonious methods will lend themselves to the efficient manufacturing of antibacterial and antiviral textiles, or the development of multifunctionalized smart textiles.Graphical abstractSupplementary informationThe online version contains supplementary material available at 10.1007/s10570-023-05099-7.

Dataset Information

Cellulose Isolation Methodology for NMR Analysis of Cellulose Ultrastructure.

Publications

Cellulose Isolation Methodology for NMR Analysis of Cellulose Ultrastructure.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets