Novel Corrosion Inhibitor for Mild Steel in HCl.
Ontology highlight
ABSTRACT:
SUBMITTER: Al-Amiery AA
PROVIDER: S-EPMC5453103 | biostudies-other | 2014 Jan
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Turbinaria ornata (TO) extract was tested as green corrosion inhibitor on mild steel (MS) coupons in conc. HCl medium with an efficiency of 100% at 25 g l-1 during 5 min exposure. Antibacterial efficacy performed against 16 S rDNA identified marine biofilming bacteria (MBB) and human pathogenic bacteria (HPB). Maximum inhibition growth was 16 mm on MBB observed in Bacillus megaterium (MBF14 - AB894827) and 20 mm on HPB in Escherichia coli (B5 - NCIM 2931). Similarly, minimum of 10 mm on MBB witnessed in Pseudomonas sp., (MBF9 - AB894829). Toxicity studies proved 50.0% LC50 at 500 μg ml-1 in 24 hrs, whereas Balanus amphitrite resulted in 100% mortality within 12 hrs. Results including weight loss, potentiodynamic polarization and electrochemical impedance spectroscopy, FT-IR and GC-MS confirm 10-Octadecaonic acid as a major corrosion inhibitor from T. ornata and is discovered as a novel antifoulant. Anticorrosion formulation will become available soon.
| S-EPMC5805700 | biostudies-literature
Project description:2-(1-methyl-4-((E)-(2-methylbenzylidene)amino)-2-phenyl-1H-pyrazol-3(2H)-ylidene)-hydrazineecarbothioamide (HCB) was synthesized as a corrosion inhibitor from the reaction of 4-aminoantipyrine, thiosemicarbazide and 2-methylbenzaldehyde. The corrosion inhibitory effects of HCB on mild steel in 1.0 M HCl were investigated using potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS). The results showed that HCB inhibited mild steel corrosion in acidic solution and inhibition efficiency increased with an increase in the concentration of the inhibitor. The inhibition efficiency was up to 96.5% at 5.0 mM. Changes in the impedance parameters suggested that HCB adsorbed on the surface of mild steel, leading to the formation of a protective film. The novel corrosion inhibitor synthesized in the present study was characterized using Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR) spectral data.
| S-EPMC5452315 | biostudies-other
Project description:Fatty acid molecules 9,12,15-octadecatrienoic acid (C18:3), 9,12-octadecadienoic acid (C18:2), and hexadecanoic acid (C16:0) possessing active functional groups with the capability of fast electron transfer have been established for effective corrosion inhibition of mild steel. In this regard, a microalga Scenedesmus sp. is isolated and its fatty acids have been studied to corroborate the adsorption behavior, attributing the anticorrosion efficacy on mild steel in 1 M HCl solution by forming metal-inhibitor framework. Electrochemical analysis has been used to ascertain the surpassing corrosion inhibition efficiency at an optimal concentration of 36 ppm with maximum 95.1% inhibitive performance. The results of metallography with or without the inhibitor molecules have indicated significant changes in surface morphology of mild steel specimen for gradual enhancement in immersion time (72 h). Hydrogen evolution reaction has been emphasized to observe the tendency of significant decrease in the bubble formation in the presence of inhibitor compared to 1 M HCl solution only. Surface morphometric studies (scanning electron microscopy and atomic force microscopy) have also revealed the excellent adsorption capacity of Scenedesmus fatty acids on metal surface. Quantum chemical calculations, performed by density functional theory, determined significant adsorption effectiveness, based on the donor-acceptor capability between metallic surface and inhibitor molecules.
| S-EPMC6217523 | biostudies-literature
Project description:The impact of AEO7 surfactant on the corrosion inhibition of carbon steel (C-steel) in 0.5 M HCl solution at temperatures between 20 °C and 50 °C was elucidated using weight loss and different electrochemical techniques. The kinetics and thermodynamic parameters of the corrosion and inhibition processes were reported. The corrosion inhibition efficiency (IE%) improved as the concentration of AEO7 increased. In addition, a synergistic effect was observed when a concentration of 1 × 10-3 mol L-1 or higher of potassium iodide (KI) was added to 40 µmol L-1 of the AEO7 inhibitor where the corrosion IE% increased from 87.4% to 99.2%. Also, it was found that the adsorption of AEO7 surfactant on C-steel surface followed the Freundlich isotherm. Furthermore, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization measurements indicated that AEO7 was physically adsorbed on the steel surface. The surface topography was examined using an optical profilometer, an atomic force microscope (AFM), and a scanning electron-microscope (SEM) coupled with an energy dispersion X-ray (EDX) unit. Quantum chemical calculations based on the density functional theory were performed to understand the relationship between the corrosion IE% and the molecular structure of the AEO7 molecule.
| S-EPMC6381149 | biostudies-literature
Project description:A novel l-histidine based ionic liquid (LHIL) was developed and successfully synthesized. Its structure was confirmed by Fourier-transform infrared spectroscopy, UV-vis spectroscopy, X-ray photoelectron spectroscopy, 1H-NMR and high-resolution mass spectrometry. The outstanding corrosion inhibition effect of the LHIL on mild steel in 1 M hydrochloric acid was thoroughly evaluated by Tafel plots, electrochemical impedance spectroscopy, and localized electrochemical strategies. The results revealed that the corrosion of mild steel was effectively suppressed by the adsorption of LHIL on its surface, and the best inhibition efficiency reached 98.8%. The adsorption behavior of LHIL on steel obeyed the Langmuir adsorption isotherm, which involved both chemisorption and physisorption. Theoretical calculations indicated the strong chemisorption of LHIL on steel, as proved by the low energy gap (ΔE = 0.0522 eV) and high binding energy (E binding = 303.47 kcal mol-1), which clearly confirmed the effectiveness of LHIL for steel protection.
| S-EPMC8979191 | biostudies-literature
Project description:A biopolymer from tragacanth gum, arabinogalactan (AG), was investigated for its adsorption and corrosion inhibition traits for carbon steel corrosion in 1 M HCl. Gravimetric method, potentiodynamic polarization measurements, electrochemical impedance spectroscopy, UV-visible spectroscopy, scanning electron microscopy, and atomic force microscopy were used to judge the adsorptive nature of AG in the acid solution. The inhibition efficiency improved with an increase in AG concentration and temperature of the acid solution. Thermodynamic and activation parameters (ΔG ads, E a, ΔH, and ΔS) were also calculated and discussed. The adsorption of AG favored Langmuir adsorption isotherm. The results of corrosion tests confirmed that AG could serve as an efficient green corrosion inhibitor for the carbon steel in 1 M HCl, yielding high efficiency and a low risk of environmental pollution. Theoretical quantum chemical and Monte Carlo simulation studies corroborated the experimental results.
| S-EPMC6641194 | biostudies-literature
Project description:Butler's cyclopolymerization protocol was used to synthesize homo and copolymers of cysteine residues and diallyldimethylammonium chloride (DADMAC) using water as a solvent and excellent yields were obtained. The structural composition of the polymers was determined using nuclear magnetic resonance (NMR) and Fourier-transform infrared (FT-IR) spectroscopies. The thermal stability of the synthesized polymers was determined using thermogravimetric analysis (TGA). The corrosion efficiencies and adsorption characteristics of these polymers on mild steel were evaluated using gravimetric weight loss and potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS). The copolymers of cysteine residues and DADMAC exhibited excellent inhibition efficiencies in arresting mild steel corrosion in 1 M hydrochloric acid (HCl) at 60 °C. The best fitted Langmuir, Temkin and Freundlich adsorption isotherms suggested that the adsorption process occurs through chemisorption and physisorption. The surface morphology of mild steel in the presence or absence of polymers was determined using atomic force microscopy (AFM), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX), and X-ray photoelectron spectroscopy (XPS). This systematic study might provide a way to design new inhibitor compounds that could be beneficial in the field of biomedical science as well as for anti-corrosion applications.
| S-EPMC9060476 | biostudies-literature
Project description:Herein, two Schiff base derivatives of vanillin and divanillin with 2-picolylamine, namely, 2-methoxy-4-((pyridin-2-ylmethylimino)methyl)phenol (compound A) and 3,3'-dimethoxy-5,5'-bis-((pyridin-2-ylmethylimino)methyl)-[1,1'-biphenyl]-2,2'-diol (compound B), respectively, were synthesized. Additionally, their adsorption characteristics and corrosion inhibition behavior were compared for mild steel in 1 M HCl using electrochemical impedance spectroscopy, potentiodynamic polarization and weight loss methods. Compound B was found to impart a better anti-corrosive effect (around 95% inhibition efficiency at 313 K) than compound A. The inhibitors act as effective mixed-type inhibitors and exhibit Langmuir-type adsorption behaviour. The kinetic-thermodynamic parameters together with the data obtained from density functional theory (DFT) and molecular dynamics (MD) simulations illustrate the mechanism of corrosion and mode of adsorption of both inhibitors on the metal surface. The better corrosion mitigation propensity of the dimeric form of the inhibitor (compound B) over the monomeric form (compound A) was tested experimentally and explained according to the theoretical data.
| S-EPMC9050057 | biostudies-literature
Project description:Most studies on the corrosion inhibition performance of organic molecules and (nano)materials were conducted within "carbon steel/1.0 M HCl" solution system using similar experimental and theoretical methods. As such, the numerous research findings in this system are sufficient to conduct comparative studies to select the best-suited inhibitor type that generally refers to a type of inhibitor with low concentration/high inhibition efficiency, nontoxic properties, and a simple and cost-economic synthesis process. Before data collection, to help readers have a clear understanding of some crucial elements for the evaluation of corrosion inhibition performance, we introduced the mainstay of corrosion inhibitors studies involved, including the corrosion and inhibition mechanism of carbon steel/HCl solution systems, evaluation methods of corrosion inhibition efficiency, adsorption isotherm models, adsorption thermodynamic parameters QC calculations, MD/MC simulations, and the main characterization techniques used. In the classification and statistical analysis section, organic compounds or (nano)materials as corrosion inhibitors were classified into six types according to their molecular structural characteristics, molecular size, and compound source, including drug molecules, ionic liquids, surfactants, plant extracts, polymers, and polymeric nanoparticles. We outlined the important conclusions obtained from recent literature and listed the evaluation methods, characterization techniques, and contrastable experimental data of these types of inhibitors when used for carbon steel corrosion in 1.0 M HCl solution. Finally, statistical analysis was only performed based on these data from carbon steel/1.0 M HCl solution system, from which some conclusions can contribute to reducing the workload of the acquisition of useful information and provide some reference directions for the development of new corrosion inhibitors.
| S-EPMC8954067 | biostudies-literature
Project description:This article outlines the synthesis of two derivatives of 4-amino-5-hydrazineyl-4H-1,2,4-triazole-3-thiol for the prevention of carbon steel corrosion in 1M HCl solution. These derivatives are (Z)-3-(1-(2-(4-amino-5-mercapto-4H-1,2,4-triazol-3-yl)hydrazono)ethyl)-2H-chromen-2-one (TZ1) and 5-(2-(9H-fluoren-9-ylidene)hydrazineyl)-4-amino-4H-1,2,4-triazole-3-thiol (TZ2). Weight loss, electrochemical experiments, surface examinations, and theoretical computation are used to evaluate the effectiveness of the two compounds to be used as corrosion inhibitors. Weight loss and electrochemical studies demonstrate that these derivatives reduce the corrosion rate of carbon steel. To examine the morphology and constitution of the carbon steel surface submerged in HCl solution as well as after adding inhibitors, surface examination tests are performed. Analysis of the test solution via UV-visible spectroscopy is employed to check the possibility of complex formation between inhibitor molecules and Fe2+ ions released during the corrosion process. In order to explore their biological activity, the antibacterial activity was investigated against (E. coli and Bacillus subtilis). Finally, theoretical confirmation of the experimental findings is provided by quantum chemical (DFT) and Monte Carlo (MC) simulation studies. More adsorption sites are present in the derivatives of 4-amino-5-hydrazineyl-4H-1,2,4-triazole-3-thiol, which offer a novel perspective for developing new classes of corrosion inhibitors with substantial protective efficacy, especially at high temperatures.
| S-EPMC10719362 | biostudies-literature