Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Improvement to the Corrosion Resistance of Ti-Based Implants Using Hydrothermally Synthesized Nanostructured Anatase Coatings.

ABSTRACT: The electrochemical behavior of polycrystalline TiO₂ anatase coatings prepared by a one-step hydrothermal synthesis on commercially pure (CP) Ti grade 2 and a Ti13Nb13Zr alloy for bone implants was investigated in Hank's solution at 37.5 °C. The aim was to verify to what extent the in-situ-grown anatase improved the behavior of the substrate in comparison to the bare substrates. Tafel-plot extrapolations from the potentiodynamic curves revealed a substantial improvement in the corrosion potentials for the anatase coatings. Moreover, the coatings grown on titanium also exhibited lower corrosion-current densities, indicating a longer survival of the implant. The results were explained by considering the effects of crystal morphology, coating thickness and porosity. Evidence for the existing porosity was obtained from corrosion and nano-indentation tests. The overall results indicated that the hydrothermally prepared anatase coatings, with the appropriate morphology and surface properties, have attractive prospects for use in medical devices, since better corrosion protection of the implant can be expected.

SUBMITTER: Lorenzetti M

PROVIDER: S-EPMC5453144 | biostudies-other | 2014 Jan

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Cytocompatibility and antibacterial activity of nanostructured H2Ti5O11·H2O outlayered Zn-doped TiO2 coatings on Ti for percutaneous implants.

Project description:To improve skin-integration and antibacterial activity of percutaneous implants, the coatings comprising an outer layer of H2Ti5O11·H2O (HTO) nanoarrays and an inner layer of microporous Zn-doped TiO2 were fabricated on Ti by micro-arc oxidation (MAO) followed with hydrothermal treatment (HT). During HT process, a large proportion of Zn2+ migrated out from TiO2 layer. TiO2 reacted with OH- and H2O, resulting in the nucleation of HTO. The nuclei grew to nanoplates, nanorods and nanofibres with HT process prolonged. Simultaneously, the orientation of nanoarrays changed from quasi-vertical to parallel to substrate. Compared to Ti, adhesion and proliferation of fibroblasts were enhanced on as-MAOed TiO2 and HTed coatings. The phenotype, differentiation and extracellular collagen secretion were obviously accelerated on vertical nanorods with proper interspace (e.g. 63 nm). HTed coatings showed enhanced antibacterial activity, which should be ascribed to the nano-topography of HTO.

| S-EPMC5654996 | biostudies-literature

Improvement of Corrosion Resistance of Waterborne Polyurethane Coatings by Covalent and Noncovalent Grafted Graphene Oxide Nanosheets.

Project description:The amphiphilic graphene derivative was prepared by covalent grafting of graphene oxide (GO) with isophorone diisocyanate and N,N-dimethylethanolamine and then noncovalent grafting of GO with sodium dodecylbenzenesulfonate. The results obtained from infrared spectroscopy, X-ray photoelectron spectroscopy, thermal gravimetric analysis, and X-ray diffraction analysis revealed that the short chains were successfully grafted onto the surface of GO. Subsequently, scanning electron microscopy and optical microscopy results showed that the modified GO (IP-GO) has the best dispersibility and compatibility than GO and reduced GO in the waterborne polyurethane matrix. The relationship between the corrosion resistance of composite coatings and the dispersibility of the graphene derivative and the compatibility of the graphene derivative with a polymer matrix were discussed. The anticorrosive properties were characterized by electrochemical impedance spectroscopy analysis and salt spray tests. Through a series of anticorrosion tests, it is concluded that the anticorrosion performance of a composite coating with 0.3 wt % IP-GO is significantly improved. The excellent anticorrosion performance is due to the perfect dispersion and good compatibility of IP-GO in waterborne polyurethane.

| S-EPMC6893952 | biostudies-literature

Corrosion Resistance of Heat-Treated Ni-W Alloy Coatings.

Project description:The paper presents research on evaluation of corrosion resistance of Ni-W alloy coatings subjected to heat treatment. The corrosion resistance was tested in 5% NaCl solution by the use of potentiodynamic polarization technique and electrochemical impedance spectroscopy. Characteristics of the Ni-W coatings after heat treatment were carried out using scanning electron microscopy, scanning Kelvin probe technique and X-ray diffraction. Suggested reasons for the improvement of properties of the heat treated Ni-W coating, obtained at the lowest current density value (125 mA?cm-2), are the highest tungsten content (c.a. 25 at.%) as well as the smallest and the most homogeneous electrochemically active surface area.

| S-EPMC7085042 | biostudies-literature

The Waterborne Superamphiphobic Coatings with Antifouling, High Temperature Resistance, and Corrosion Resistance.

Project description:Water-based superamphiphobic coatings are environment-friendly, which have attracted tremendous attention recently, but the performances are severely limited by the dispersibility of hydrophobic particles. To solve the poor dispersibility of modified silica powder with hydrophobicity, silica dispersion was blended with polytetrafluoroethylene (PTFE) emulsion and modified aluminum tripolyphosphate (ATP) dispersion to successfully prepare water-based coatings. Multifunctional coatings were prepared by one-step spraying. It possessed good adhesion (grade 1), excellent antifouling, impact resistance, chemical stability (acid and alkali resistance for 96 h of immersion), and corrosion resistance (3.5 wt % NaCl solutions for 20 days). More importantly, the superamphiphobic coatings had high contact angles (CAs) and low slide angles (SAs) for ethylene glycol (CAs = 154 ± 0.8°; SAs = 13 ± 0.7°) and water (CAs = 158 ± 0.7°; SAs = 4 ± 0.3°). Furthermore, the composite coating was still hydrophobic after 35 cycles of wear with high roughness sandpaper (120 mesh) under three different loads, which maintained superamphiphobicity at 425 °C. This work is expected to provide a facile idea and method for the preparation of waterborne superamphiphobic coatings.

| S-EPMC10116617 | biostudies-literature

Corrosion Resistance in Artificial Perspiration of Cr-Based Decorative Coatings.

Project description:We aim at developing hexavalent chromium-free coatings for frequently touched decorative parts. Cr(N,O) and multilayered CrN/CrO coatings were deposited by means of reactive magnetron sputtering. All samples presented good adhesion to the substrates enhanced by an epoxy layer designed to enhance PVD coating adhesion. Similar substrates are found in the automotive industry and can be used in appliances where a metallic finish is desired by the consumer. Corrosion behavior was induced, using artificial sweat to simulate long exposure to human touch for 96 h. In potentiodynamic polarization tests, the coatings were revealed to be nobler than the substrate alone. Cr displayed a non-existent passivation region, while gCrN exhibited a quick passivation of the surface and its respective breakdown and several current fluctuations, indicating the occurrence of pitting, which was confirmed by SEM micrography after the corrosion. Regarding EIS results, all films depicted a diminution of impedance modulus (|Z|) after 96 h, which indicates a diminution of corrosion resistance against artificial sweat. Nitride films exhibited the worst anticorrosive features. On the other hand, Cr and CrO exhibited the highest |Z| values. These results are corroborated by low the corrosion rates of both coatings. The equivalent electrical circuit allows us to confirm oxide formation in the outermost layer of the films due to electrolyte/surface interaction, indicating a self-protecting mechanism. Nitride films showed the lowest values and less corrosion resistance, confirming the results obtained in polarization potentiodynamic tests. The coatings developed in this work, namely Cr and CrO, showed a promising corrosion resistance behavior that could endure a lifetime of frequent human touch in various decorative applications either automotive or general appliances.

| S-EPMC10459534 | biostudies-literature

Construction of tantalum/poly(ether imide) coatings on magnesium implants with both corrosion protection and osseointegration properties.

Project description:Poly(ether imide) (PEI) has shown satisfactory corrosion protection capability with good adhesion strength as a coating for magnesium (Mg), a potential candidate of biodegradable orthopedic implant material. However, its innate hydrophobic property causes insufficient osteoblast affinity and a lack of osseointegration. Herein, we modify the physical and chemical properties of a PEI-coated Mg implant. A plasma immersion ion implantation technique is combined with direct current (DC) magnetron sputtering to introduce biologically compatible tantalum (Ta) onto the surface of the PEI coating. The PEI-coating layer is not damaged during this process owing to the extremely short processing time (30 s), retaining its high corrosion protection property and adhesion stability. The Ta-implanted layer (roughly 10-nm-thick) on the topmost PEI surface generates long-term surface hydrophilicity and favorable surface conditions for pre-osteoblasts to adhere, proliferate, and differentiate. Furthermore, in a rabbit femur study, the Ta/PEI-coated Mg implant demonstrates significantly enhanced bone tissue affinity and osseointegration capability. These results indicate that Ta/PEI-coated Mg is promising for achieving early mechanical fixation and long-term success in biodegradable orthopedic implant applications.

| S-EPMC7595939 | biostudies-literature

Corrosion Resistance of Nanostructured Cemented Carbides with Alternative FeNi and FeNiCo Binders.

Project description:Nanostructured cemented carbides with Co binders have shown excellent mechanical properties in various applications. Nevertheless, their corrosion resistance has shown to be insufficient in different corrosive environments, leading to premature tool failure. In this study, WC-based cemented carbide samples with different binders were produced using 9 wt% of FeNi or FeNiCo with the addition of Cr3C2 and NbC as the grain growth inhibitors. The samples were investigated using electrochemical corrosion techniques: the open circuit potential Ecorr, the linear polarization resistance (LPR), the Tafel extrapolation method, and the electrochemical impedance spectroscopy (EIS) at room temperature in the solution of 3.5% NaCl. Microstructure characterization, surface texture analysis, and instrumented indentation were conducted to investigate the influence of corrosion on the micro-mechanical properties and the surface characteristics of the samples before and after corrosion. The obtained results indicate a strong binder chemical composition's effect on the consolidated materials' corrosive behavior. Compared to the conventional WC-Co systems, a significantly improved corrosion resistance was observed for both alternative binder systems. The study shows that the samples with the FeNi binder are superior to those with the FeNiCo binder since they were almost unaffected when exposed to the acidic medium.

| S-EPMC10142917 | biostudies-literature

Assessing corrosion resistance of two-dimensional nanomaterial-based coatings on stainless steel substrates.

Project description:Two-dimensional (2D) materials have elicited considerable interest in the past decade due to a diverse array of novel properties ranging from high surface to mass ratios, a wide range of band gaps (insulating boron nitride (BN) to semiconducting transition metal dichalcogenides), high mechanical strength and chemical stability. Given the superior chemo-thermo-mechanical properties, 2D materials may provide transformative solution to a familiar yet persistent problem of significant socio-economic burden: the corrosion of stainless steel (SS). With this broader perspective, we investigate corrosion resistance properties of SS-coated with 2D nanomaterials; molybdenum disulfide (MoS2), BN, bulk graphite in 3.5 wt% aqueous NaCl solution. The nanosheets were prepared by a novel liquid phase exfoliation technique and the coatings were made by a paint brush to achieve uniformity. Open circuit potential (OCP) and potentiodynamic plots indicate the best corrosion resistance is provided by the MoS2 coatings. Superior performance of the coating is attributed to low electronic conductivity, large flake size and uniform coverage of SS substrate, which probably impeded the corrosive ions from the solution from diffusing through the coating.

| S-EPMC7211889 | biostudies-literature

Effect of Autoclaving Time on Corrosion Resistance of Sandblasted Ti G4 in Artificial Saliva.

Project description:Titanium Grade 4 (Ti G4) is the most commonly used material for dental implants due to its excellent mechanical properties, chemical stability and biocompatibility. A thin, self-passive oxide layer with protective properties to corrosion is formed on its surface. However, the spontaneous TiO2 layer is chemically unstable. In this work, the impact of autoclaving time on corrosion resistance of Ti G4 in artificial saliva solution with pH = 7.4 at 37 °C was studied. Ti G4 was sandblasted with white Al2O3 particles and autoclaved for 30-120 min. SEM, EDS, 2D roughness profiles, confocal laser scanning microscopy, and a Kelvin scanning probe were used for the surface characterization of the Ti G4 under study. In vitro corrosion resistance tests were conducted using open circuit potential, polarization curves, and electrochemical impedance spectroscopy measurements. It was found that Sa parameter, electron work function, and thickness of the oxide layers, determined based on impedance measurements, increased after autoclaving. The capacitive behavior and high corrosion resistance of tested materials were revealed. The improvement in the corrosion resistance after autoclaving was due to the presence of oxide layers with high chemical stability. The optimal Ti G4 surface for dentistry can be obtained by sandblasting with Al2O3 with an average grain size of 53 µm, followed by autoclaving for 90 min.

| S-EPMC7560277 | biostudies-literature

Substituted hydroxyapatite coatings of bone implants.

Project description:Surface modification of orthopedic and dental implants has been demonstrated to be an effective strategy to accelerate bone healing at early implantation times. Among the different alternatives, coating implants with a layer of hydroxyapatite (HAp) is one of the most used techniques, due to its excellent biocompatibility and osteoconductive behavior. The composition and crystalline structure of HAp allow for numerous ionic substitutions that provide added value, such as antibiotic properties or osteoinduction. In this article, we will review and critically analyze the most important advances in the field of substituted hydroxyapatite coatings. In recent years substituted HAp coatings have been deposited not only on orthopedic prostheses and dental implants, but also on macroporous scaffolds, thus expanding their applications towards bone regeneration therapies. Besides, the capability of substituted HAps to immobilize proteins and growth factors by non-covalent interactions has opened new possibilities for preparing hybrid coatings that foster bone healing processes. Finally, the most important in vivo outcomes will be discussed to understand the prospects of substituted HAp coatings from a clinical point of view.

| S-EPMC7116284 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data