Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Photocatalytic H₂ Evolution Using Different Commercial TiO₂ Catalysts Deposited with Finely Size-Tailored Au Nanoparticles: Critical Dependence on Au Particle Size.

ABSTRACT: One weight percent of differently sized Au nanoparticles were deposited on two commercially available TiO₂ photocatalysts: Aeroxide P25 and Kronos Vlp7000. The primary objective was to investigate the influence of the noble metal particle size and the deposition method on the photocatalytic activity. The developed synthesis method involves a simple approach for the preparation of finely-tuned Au particles through variation of the concentration of the stabilizing agent. Au was deposited on the TiO₂ surface by photo- or chemical reduction, using trisodium citrate as a size-tailoring agent. The Au-TiO₂ composites were synthetized by in situ reduction or by mixing the titania suspension with a previously prepared gold sol. The H₂ production activities of the samples were studied in aqueous TiO₂ suspensions irradiated with near-UV light in the absence of dissolved O₂, with oxalic acid or methanol as the sacrificial agent. The H₂ evolution rates proved to be strongly dependent on Au particle size: the highest H₂ production rate was achieved when the Au particles measured ~6 nm.

SUBMITTER: Kmetyko A

PROVIDER: S-EPMC5456446 | biostudies-other | 2014 Nov

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Differently Shaped Au Nanoparticles: A Case Study on the Enhancement of the Photocatalytic Activity of Commercial TiO₂.

Project description:In the present work, the influence of a gold nanoparticle's shape was investigated on the commercially available Evonik Aeroxide P25. By the variation of specific synthesis parameters, three differently shaped Au nanoparticles were synthetized and deposited on the surface of the chosen commercial titania. The nanoparticles and their composites' morphological and structural details were evaluated, applying different techniques such as Diffuse Reflectance Spectroscopy (DRS), X-ray Diffraction (XRD), and Transmission Electron Microscopy (TEM). The influence of the Au nanoparticles' shape was discussed by evaluating their photocatalytic efficiency on phenol and oxalic acid degradation and by investigating the H₂ production efficacy of the selected composites. Major differences in their photocatalytic performance depending on the shape of the deposited noble metal were evidenced.

| S-EPMC5455219 | biostudies-literature

Synergistic Effect of Dual Particle-Size AuNPs on TiO₂ for Efficient Photocatalytic Hydrogen Evolution.

Project description:Design of efficient catalysts for photocatalytic water-splitting hydrogen evolution is of fundamental importance for the production of sustainable clean energy. In this study, a dual particle-size AuNPs/TiO₂ composite containing both small (16.9 ± 5.5 nm) and large (45.0 ± 9.8 nm) AuNPs was synthesized by annealing two different sized AuNPs onto TiO₂ nanosheets. Dual particle-size AuNPs/TiO₂ composites of 2.1 wt% catalyze photocatalytic H₂ evolution 281 times faster than pure TiO₂. Control experiments indicate the observed rate increase for the 2.1 wt% dual particle-size AuNPs/TiO₂ composites is larger than 2.1 wt% small AuNPs/TiO₂ composites, or 2.1 wt% large AuNPs/TiO₂ composites in isolation. The observed photocatalytic enhancement can be attributed to the synergistic effect of dual particle-size AuNPs on TiO₂. Specifically, small-sized AuNPs can act as an electron sink to generate more electron-hole pairs, while the surface plasmon resonance (SPR) effect of large-sized AuNPs concurrently injects hot electrons into the TiO₂ conduction band to enhance charge transfer. In addition, a gold-dicyanodiamine composite (GDC)-directed synthesis of 2.1 wt% dual particle-size AuNPs/TiO₂ composites was also completed. Notably, a photocatalytic efficiency enhancement was observed that was comparable to the previously prepared 2.1 wt% dual particle-size AuNPs/TiO₂ composites. Taken together, the synergistic effects of dual particle-size AuNPs on TiO₂ can be potentially used as a foundation to develop semiconductor photocatalyst heterojunction with enhanced photocatalytic activity.

| S-EPMC6523663 | biostudies-literature

Effects of Particle Size on the Structure and Photocatalytic Performance by Alkali-Treated TiO2.

Project description:Particle size of nanomaterials has significant impact on their photocatalyst properties. In this paper, TiO2 nanoparticles with different crystalline sizes were prepared by adjusting the alkali-hydrothermal time (0-48 h). An annealing in N2 atmosphere after hydrothermal treatment caused TiO2 reduction and created defects, resulting in the visible light photocatalytic activity. The evolution of physicochemical properties along with the increase of hydrothermal time at a low alkali concentration has been revealed. Compared with other TiO2 samples, TiO2-24 showed higher photocatalytic activity toward degrading Rhodamine B and Sulfadiazine under visible light. The radical trapping and ESR experiments revealed that O2•- is the main reactive specie in TiO2-24. Large specific surface areas and rapid transfer of photogenerated electrons are responsible for enhancing photocatalytic activity. The above findings clearly demonstrate that particle size and surface oxygen defects can be regulated by alkali-hydrothermal method. This research will deepen the understanding of particle size on the nanomaterials performance and provide new ideas for designing efficient photocatalysts.

| S-EPMC7153365 | biostudies-literature

The effect of particle size, morphology and support on the formation of palladium hydride in commercial catalysts.

Project description:The relative amounts of hydrogen retained by a range of supported palladium catalysts have been investigated by a combination of electron microscopy and spectroscopic techniques, including incoherent inelastic neutron scattering. Contrary to expectation, the hydrogen capacity is not determined solely by the metal particle size, but it is a complex interaction between the particle size and its state of aggregation. The nature of the support is not only integral to the amount of hydrogen held by the catalyst, it also causes a marked difference in the rate of release of stored hydrogen from palladium. It is more difficult to fully dehydrogenate palladium on/in the porous activated carbon than on the non-porous carbon black based catalyst. The type of support also results in differences in the form of the residual hydrogen: whether it is α- or β-hydride phase, subsurface or in the threefold surface site. Our data on the supported catalysts reinforces what has only been seen previously with palladium black and our computational study provides confirmation of the empirical assignments. We also report the first vibrational spectroscopic study of hydrogen adsorbed at the surface of β-PdH and have observed for the first time hydrogen in the on-top site. This has enabled the relative proportion of bulk- to surface-H occupation in calculated model and in industrial nanoparticles to be estimated.

| S-EPMC6334263 | biostudies-literature

Nanostructured, mesoporous Au/TiO(2) model catalysts - structure, stability and catalytic properties.

Project description:Aiming at model systems with close-to-realistic transport properties, we have prepared and studied planar Au/TiO(2) thin-film model catalysts consisting of a thin mesoporous TiO(2) film of 200-400 nm thickness with Au nanoparticles, with a mean particle size of ~2 nm diameter, homogeneously distributed therein. The systems were prepared by spin-coating of a mesoporous TiO(2) film from solutions of ethanolic titanium tetraisopropoxide and Pluronic P123 on planar Si(100) substrates, calcination at 350 °C and subsequent Au loading by a deposition-precipitation procedure, followed by a final calcination step for catalyst activation. The structural and chemical properties of these model systems were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), N(2) adsorption, inductively coupled plasma ionization spectroscopy (ICP-OES) and X-ray photoelectron spectroscopy (XPS). The catalytic properties were evaluated through the oxidation of CO as a test reaction, and reactivities were measured directly above the film with a scanning mass spectrometer. We can demonstrate that the thin-film model catalysts closely resemble dispersed Au/TiO(2) supported catalysts in their characteristic structural and catalytic properties, and hence can be considered as suitable for catalytic model studies. The linear increase of the catalytic activity with film thickness indicates that transport limitations inside the Au/TiO(2) film catalyst are negligible, i.e., below the detection limit.

| S-EPMC3190629 | biostudies-literature

Electro-spray deposited TiO2 bilayer films and their recyclable photocatalytic self-cleaning strategy.

Project description:Recyclable titanium dioxide (TiO2)-based photocatalytic self-cleaning films (SCFs) having a bilayer structure were prepared and assessed. These SCFs comprised two layers of fibers fabricated using an electrospinning process. The self-cleaning layer was made of acrylonitrile-butadiene-styrene (ABS) fibers with embedded TiO2 while the substrate layer was composed of fibers made by simultaneously electrospinning poly (vinyl alcohol) (PVA) and ABS. This substrate improved the mechanical strength of the SCF and provided greater adhesion due to the presence of the PVA. The experimental results showed that the hydrophobicity (as assessed by the water contact angle), photocatalytic properties and self-cleaning efficiency of the SCF were all enhanced with increasing TiO2 content in the ABS/TiO2 fibers. In addition, the introduction of the substrate layer allowed the SCFs to be applied to various surfaces and then peeled off when desired. The ABS fibers effectively improved the strength of the overall film, while deterioration of the ABS upon exposure to UV light was alleviated by the addition of TiO2. These SCFs can potentially be recycled after use in various environments, and therefore have applications in the fields of environmental protection and medical science.

| S-EPMC8799740 | biostudies-literature

Degradable and Photocatalytic Antibacterial Au-TiO₂/Sodium Alginate Nanocomposite Films for Active Food Packaging.

Project description:A degradable and antibacterial sodium alginate film containing functional Au-TiO₂ nanocomposites for food packaging was successfully developed. The Au-TiO₂ nanocomposites are synthesized hydrothermally and mixed with the alginate solution to form the film by a casting method. The Au-TiO₂ nanocomposites enable the film with excellent visible light absorption and transfer ability with the light absorption rang covering UV⁻visible wavelength (300⁻800 nm) and induce the increase of the film water contact angle from 40° to 74°, which contributes to the film shape stability. Furthermore, compared to the TiO₂ nanoparticle-incorporated film, the antibacterial ability of Au-TiO₂/sodium alginate composite film is improved approximately by 60% and 50% against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), respectively, in light conditions. The antibacterial property of the film arises from the increased production of reactive oxygen species (ROS) induced by the surface plasmonic resonance of Au nanoparticles. The degradable and antibacterial properties render the composite film of great application potential in food packaging industry.

| S-EPMC6266112 | biostudies-literature

Synthesis of Shape-Tailored WO₃ Micro-/Nanocrystals and the Photocatalytic Activity of WO₃/TiO₂ Composites.

Project description:A traditional semiconductor (WO₃) was synthesized from different precursors via hydrothermal crystallization targeting the achievement of three different crystal shapes (nanoplates, nanorods and nanostars). The obtained WO₃ microcrystals were analyzed by the means of X-ray diffraction (XRD), scanning electron microscopy (SEM) and diffuse reflectance spectroscopy (DRS). These methods contributed to the detailed analysis of the crystal morphology and structural features. The synthesized bare WO₃ photocatalysts were totally inactive, while the P25/WO₃ composites were efficient under UV light radiation. Furthermore, the maximum achieved activity was even higher than the bare P25's photocatalytic performance. A correlation was established between the shape of the WO₃ crystallites and the observed photocatalytic activity registered during the degradation of different substrates by using P25/WO₃ composites.

| S-EPMC5502922 | biostudies-other

High-Efficiency Photocatalytic Degradation of Tannic Acid Using TiO2 Heterojunction Catalysts.

Project description:Photocatalysts have been extensively used for hydrogen evolution or organic degradation. In this work, two different heterojunction types of composite photocatalysts, 1T-MoS2@TiO2 with Schottky heterojunction and 2H-MoS2@TiO2 with type-II heterojunction, are synthesized via hydrothermal synthesis. These two composite materials exhibit excellent photocatalytic activity toward the degradation of tannic acid, which is a typical organic in nuclear wastewater. At an optimal loading of 16% 1T-MoS2, the 1T-MoS2@TiO2 shows the highest degradation capacity of 98%, which is 3.2 times higher than that of pure TiO2. The degradation rate of 16% 1T-MoS2@TiO2 is much higher than that of 13% 2H-MoS2@TiO2. The enhanced photocatalytic activity might be attributed to the improved charge transfer according to the mechanism investigation, supported by the X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS) analyses. This work provides new opportunities for constructing highly efficient catalysts for nuclear waste disposal.

| S-EPMC8567273 | biostudies-literature

Synthesis and Photocatalytic Activity of Pt-Deposited TiO2 Nanotubes (TNT) for Rhodamine B Degradation.

Project description:Dye wastewater has attracted more and more attention because of its high environmental risk. In this study, a novel TiO2 nanotube (TNT) catalyst was prepared and its morphology and structure were characterized. The synthetic catalyst was used to degrade Rhodamine B (RhB) under UV light and evaluated for the application performance. According to the characterization results and degradation properties, the optimum synthetic conditions were selected as 400°C calcination temperature and 10 wt% Pt deposition. As a result, the degradation efficacies were sequenced as TNT-400-Pt > TNT-500-Pt > TNT-400 > TNT-300-Pt. In addition, the effect of pH and initial concentration of RhB were explored, and their values were both increased with the decreased degradation efficacy. While the moderate volume of 11 mm of H2O2 addition owned better performance than that of 0, 6, and 15 mm. Scavengers such as tertbutanol (t-BuOH), disodium ethylenediaminetetraacetate (EDTA-Na2), and nitroblue tetrazolium (NBT) were added during the catalytic process and it proved that superoxide radical anions (O2-•) , photogenerated hole (h+) and hydroxyl radical (OH•) were the main active species contributing for RhB removal. For the application, TNT-Pt could deal with almost 100% RhB, Orange G (OG), Methylene blue (MB), and Congo red (CR) within 70 min and still kept more than 50% RhB removal in the fifth recycling use. Therefore, TNT-Pt synthesized in this study is potential to be applied to the dye wastewater treatment.

| S-EPMC9194477 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data