Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Physicochemical Characterization of Functional Lignin-Silica Hybrid Fillers for Potential Application in Abrasive Tools.

ABSTRACT: Functional lignin-SiO₂ hybrid fillers were prepared for potential application in binders for phenolic resins, and their chemical structure was characterized. The properties of these fillers and of composites obtained from them with phenolic resin were compared with those of systems with lignin or silica alone. The chemical structure of the materials was investigated by Fourier transform infrared spectroscopy (FT-IR) and carbon-13 nuclear magnetic resonance spectroscopy (13C CP MAS NMR). The thermal stability of the new functional fillers was examined by thermogravimetric analysis-mass spectrometry (TG-MS). Thermo-mechanical properties of the lignin-silica hybrids and resin systems were investigated by dynamic mechanical thermal analysis (DMTA). The DMTA results showed that abrasive composites with lignin-SiO₂ fillers have better thermo-mechanical properties than systems with silica alone. Thus, fillers based on lignin might provide new, promising properties for the abrasive industry, combining the good properties of lignin as a plasticizer and of silica as a filler improving mechanical properties.

SUBMITTER: Strzemiecka B

PROVIDER: S-EPMC5456845 | biostudies-other | 2016 Jun

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Epoxy Resin Composite Based on Functional Hybrid Fillers.

Project description:A study was carried out involving the filling of epoxy resin (EP) with bentonites and silica modified with polyhedral oligomeric silsesquioxane (POSS). The method of homogenization and the type of filler affect the functional and canceling properties of the composites was determined. The filler content ranged from 1.5% to 4.5% by mass. The basic mechanical properties of the hybrid composites were found to improve, and, in particular, there was an increase in tensile strength by 44%, and in Charpy impact strength by 93%. The developed hybrid composites had characteristics typical of polymer nanocomposites modified by clays, with a fine plate morphology of brittle fractures observed by SEM, absence of a plate separation peak in Wide Angles X-ray Scattering (WAXS) curves, and an exfoliated structure observed by TEM.

| S-EPMC5456203 | biostudies-other

Hybrid Silica-Based Fillers in Nanocomposites: Influence of Isotropic/Isotropic and Isotropic/Anisotropic Fillers on Mechanical Properties of Styrene-Butadiene (SBR)-Based Rubber.

Project description:The improvement of mechanical properties of polymer-based nanocomposites is usually obtained through a strong polymer-silica interaction. Most often, precipitated silica nanoparticles are used as filler. In this work, we study the synergetic effect occurring between dual silica-based fillers in a styrene-butadiene rubber (SBR)/polybutadiene (PBD) rubber matrix. Precipitated Highly Dispersed Silica (HDS) nanoparticles (10 nm) have been associated with spherical Stöber silica nanoparticles (250 nm) and anisotropic nano-Sepiolite. By imaging filler at nano scale through Scanning Transmission Electron Microscopy, we have shown that anisotropic fillers align only in presence of a critical amount of HDS. The dynamic mechanical analysis of rubber compounds confirms that this alignment leads to a stiffer nanocomposite when compared to Sepiolite alone. On the contrary, spherical 250 nm nanoparticles inhibit percolation network and reduce the nanocomposite stiffness.

| S-EPMC8348337 | biostudies-literature

Stabilized Lignin Nanoparticles for Versatile Hybrid and Functional Nanomaterials.

Project description:Spherical lignin nanoparticles are emerging biobased nanomaterials, but instability and dissolution in organic solvents and aqueous alkali restrict their applicability. Here, we report the synthesis of hydroxymethylated lignin nanoparticles and their hydrothermal curing to stabilize the particles by internal cross-linking reactions. These colloidally stable particles contain a high biobased content of 97% with a tunable particle size distribution and structural stability in aqueous media (pH 3 to 12) and organic solvents such as acetone, ethanol, dimethylformamide, and tetrahydrofuran. We demonstrate that the free phenolic hydroxyl groups that are preserved in the cured particles function as efficient reducing sites for silver ions, giving rise to hybrid lignin-silver nanoparticles that can be used for quick and facile sensing of hydrogen peroxide. The stabilized lignin particles can also be directly modified using base-catalyzed reactions such as the ring-opening of cationic epoxides that render the particles with pH-dependent agglomeration and redispersion properties. Combining scalable synthesis, solvent stability, and reusability, this new class of lignin nanoparticles shows potential for its use in circular biobased nanomaterials.

| S-EPMC9667459 | biostudies-literature

Physicochemical characterizations of functional hybrid liposomal nanocarriers formed using photo-sensitive lipids.

Project description:With recent advances in the field of diagnostics and theranostics, liposomal technology has secured a fortified position as a potential nanocarrier. Specifically, radiation/photo-sensitive liposomes containing photo-polymerizable cross-linking lipids are intriguing as they can impart the vesicles with highly interesting properties such as response to stimulus and improved shell stability. In this work, 1,2-bis(10,12-tricosadiynoyl)-sn-glycero-3-phosphoethanolamine (DTPE) is used as a photo-polymerizable lipid to form functional hybrid-liposomes as it can form intermolecular cross-linking through the diacetylenic groups. Hybrid-liposomes were formulated using mixtures of DTPE and saturated lipids of different chain lengths (dipalmitoylphosphatidylcholine (DPPC) and dimirystoilphosphatidylcholine (DMPC)) at different molar ratios. The physico-chemical characteristics of the liposomes has been studied before and after UV irradiation using a combination of techniques: DSC, QCM-D and solid-state NMR. The results signify the importance of a subtle modification in alkyl chain length on the phase behavior of the hybrid-liposomes and on the degree of crosslinking in the shell.

| S-EPMC5390264 | biostudies-literature

Silicone Composites with CNT/Graphene Hybrid Fillers: A Review.

Project description:This review is dedicated to versatile silicone rubber composites based on carbon nanotube/graphene (CNT/G) hybrid fillers. Due to their unique mechanical, electrical, thermal, and biological properties, such composites have enormous potential for medical, environmental, and electronics applications. In the scope of this paper, we have explored CNT/graphene/silicone composites with a different morphology, analyzed the synergistic effect of hybrid fillers on various properties of silicone composites, and observed the existing approaches for the fabrication of hybrid composites with a seamless, assembled, and/or foamed structure. In conclusion, current challenges and future prospects for silicone composites based on CNTs and graphene have been thoroughly discussed.

| S-EPMC8124395 | biostudies-literature

Application of Hybrid Fillers for Improving the Through-Plane Heat Transport in Graphite Nanoplatelet-Based Thermal Interface Layers.

Project description:The in-plane alignment of graphite nanoplatelets (GNPs) in thin thermal interface material (TIM) layers suppresses the though-plane heat transport thus limiting the performance of GNPs in the geometry normally required for thermal management applications. Here we report a disruption of the GNP in-plane alignment by addition of spherical microparticles. The degree of GNP alignment was monitored by measurement of the anisotropy of electrical conductivity which is extremely sensitive to the orientation of high aspect ratio filler particles. Scanning Electron Microscopy images of TIM layer cross-sections confirmed the suppression of the in-plane alignment. The hybrid filler formulations reported herein resulted in a synergistic enhancement of the through-plane thermal conductivity of GNP/Al2O3 and GNP/Al filled TIM layers confirming that the control of GNP alignment is an important parameter in the development of highly efficient GNP and graphene-based TIMs.

| S-EPMC4538567 | biostudies-other

Impact of physicochemical properties on duration and head rice yield during abrasive and friction milling of rice.

Project description:The physicochemical properties of four rice varieties representing high amylose (Jyothi and IR64), intermediate amylose (Taraori Basmati) and waxy (Agonibora) were evaluated to understand their influence on milling. Based on the grain dimensions, Jyothi and Agonibora were classified as long and medium, IR64 as long and slender, and Basmati as extra-long and slender. The head rice yield (HRY) was higher with abrasive milling (61-75%) compared to friction milling (10-60%) although it required longer milling duration. Lower grain thickness, hardness and, amylose and higher bran fat content reduced the friction milling duration while these properties prolonged the duration in abrasive milling. Agonibora variety with low amylose content and high-fat content exhibited the highest HRY in both the types of milling. The study revealed that the selection of milling process should be made with due importance to grain geometry as well as its chemical properties.

| S-EPMC6675846 | biostudies-literature

Physicochemical and Functional Characteristics of RD43 Rice Flour and Its Food Application.

Project description:The increased use of a new rice cultivar is the result of increasing consumer demands for healthier choices. In this study, physicochemical, thermal, pasting, and functional properties of flour from RD43 rice, a new rice variety, and its food application were investigated. RD43 rice flour demonstrated an irregular and polyhedral shape with a volume mean diameter of 103 ± 0.15 µm. In addition, the amylose content of RD43 rice and Hom Mali rice flour was 19.04% and 16.38%, respectively. The X-ray diffraction (XRD) and Fourier Transforms Infrared (FTIR) confirmed the presence of a V-type crystalline structure and less crystallinity in RD43 rice flour, which resulted in a significant reduction of the water absorption index (WAI), swelling power (SP), water solubility index (WSI), gelatinization temperature, and pasting properties. Comparing with Hom Mali rice flour, RD43 rice flour had greater ability to disrupt cholesterol micellization and bind bile acid. Furthermore, it had lower starch digestibility, with a lower percentage of rapidly digestible starch (RDS) and higher percentage of undigestible starch than Hom Mali rice flour. Moreover, steamed muffins based on RD43 rice flour had lower starch digestibility than Hom Mali steamed muffins. The sensory analysis showed no significant differences between Hom Mali and RD43 steamed muffins. The findings suggest that RD43 rice flour could be an alternative ingredient for lowering the glycemic index of food products.

| S-EPMC7767328 | biostudies-literature

Improving Fibrin Hydrogels' Mechanical Properties, through Addition of Silica or Chitosan-Silica Materials, for Potential Application as Wound Dressings.

Project description:Fibrin is a protein-based hydrogel formed during blood coagulation. It can also be produced in vitro from human blood plasma, and it is capable of resisting high deformations. However, after each deformation process, it loses high amounts of water, which subsequently makes it mechanically unstable and, finally, difficult to manipulate. The objective of this work was to overcome the in vitro fibrin mechanical instability. The strategy consists of adding silica or chitosan-silica materials and comparing how the different materials electrokinetic-surface properties affect the achieved improvement. The siliceous materials electrostatic and steric stabilization mechanisms, together with plasma protein adsorption on their surfaces, were corroborated by DLS and ζ-potential measurements before fibrin gelling. These properties avoid phase separation, favoring homogeneous incorporation of the solid into the forming fibrin network. Young's modulus of modified fibrin hydrogels was evaluated by AFM to quantitatively measure stiffness. It increased 2.5 times with the addition of 4 mg/mL silica. A similar improvement was achieved with only 0.7 mg/mL chitosan-silica, which highlighted the contribution of hydrophilic chitosan chains to fibrinogen crosslinking. Moreover, these chains avoided the fibroblast growth inhibition onto modified fibrin hydrogels 3D culture observed with silica. In conclusion, 0.7 mg/mL chitosan-silica improved the mechanical stability of fibrin hydrogels with low risks of cytotoxicity. This easy-to-manipulate modified fibrin hydrogel makes it suitable as a wound dressing biomaterial.

| S-EPMC8192204 | biostudies-literature

Morphological, Mechanical and Gas Penetration Properties of Elastomer Composites with Hybrid Fillers.

Project description:Ethylene-propylene-diene monomer (EPDM)-based composites including four different types of graphene nanoplatelets (GnPs) were prepared to evaluate the size effects of GnPs in terms of both specific surface area and lateral size on the morphological, mechanical, and viscoelastic properties, swelling ratio, crosslink density, and oxygen permeability. EPDM-based hybrid composites with GnPs and carbon black (CB) fillers were prepared, with the concentrations of 20 and 50 phr of CB and GnPs up to 7 phr. All samples were prepared using the melt mixing method, followed by compression molding. The specific surface area of GnPs is a more important key factor for mechanical and viscoelastic properties than its lateral size. The presence of GnPs leads to a decrease in the swelling ratio and oxygen permeability of the matrix while an increase in the crosslinking density. For a given specific surface area of GnPs (170 m2/g) and the same thickness (5 nm), the optimum lateral size for mechanical properties, swelling ratio, and crosslinking density is about 30 µm. There is a distinct synergic effect on the mentioned properties when hybrid fillers are used. For hybrid composites, the optimum total and each filler concentration are found to be important for achieving the best performance in terms of mechanical properties, swelling ratio, and crosslink density.

| S-EPMC9572072 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data