Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Raman Spectra of Luminescent Graphene Oxide (GO)-Phosphor Hybrid Nanoscrolls.

ABSTRACT: Graphene oxide (GO)-phosphor hybrid nanoscrolls were synthesized using a simple chemical method. The GO-phosphor ratio was varied to find the optimum ratio for enhanced optical characteristics of the hybrid. A scanning electron microscope analysis revealed that synthesized GO scrolls achieved a length of over 20 μm with interior cavities. The GO-phosphor hybrid is extensively analyzed using Raman spectroscopy, suggesting that various Raman combination modes are activated with the appearance of a low-frequency radial breathing-like mode (RBLM) of the type observed in carbon nanotubes. All of the synthesized GO-phosphor hybrids exhibit an intense luminescent emission around 540 nm along with a broad emission at approximately 400 nm, with the intensity ratio varying with the GO-phosphor ratio. The photoluminescence emissions were gauged using Commission Internationale d'Eclairage (CIE) coordinates and at an optimum ratio. The coordinates shift to the white region of the color spectra. Our study suggests that the GO-phosphor hybrid nanoscrolls are suitable candidates for light-emitting applications.

SUBMITTER: Rani JR

PROVIDER: S-EPMC5458848 | biostudies-other | 2015 Dec

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Luminescent Hybrid Material Based on Boron Organic Phosphor and Silica Aerogel Matrix.

Project description:A new luminescent hybrid material based on silica aerogel and a boron-containing coordination compound with 8-hydroxyquinoline was created, and its physicochemical and spectral-luminescent characteristics were studied. A simple scheme for the synthesis of a hybrid luminescent material was developed. Simultaneously with the synthesis of the aerogel, the formation of a boron-containing phosphor was carried out using an isopropanol solution of boric acid and 8-hydroxyquinoline. Using in situ luminescent measurements, the mechanisms of the formation of boron-based luminescent complexes in isopropanol and tetrahydrofuran media were established. Both hydrophilic and hydrophobic silica aerogels were tested as matrices for the hybrid material. The formation of a thin layer of a boron-containing coordination luminescent compound on the highly developed surface of the SiO2 aerogel made it possible to strongly stabilize the aerogel structure and noticeably increase the thermal stability of the synthesized hybrid material.

| S-EPMC9416728 | biostudies-literature

mRNA microarray analysis on HepG2 cells exposed to Grpahene oxide (GO) and reduced graphene oxide (rGO) Nanomaterials

Project description:In order to evaluate the identification of genes and pathways, the global gene expression profiles were assessed in response to GO and rGO on Human hepatoma (HepG2) cells. We performed whole genome DNA microarray experiments using HepG2 cells exposed to GO and rGO for 24h. We used whole genome microarrays to screen for global changed in HepG2 transcription profiles and with subsequent quantitative analysis conducted on selected genes. 24h GO and rGO exposed HepG2 cells were used for total RNA extraction and hybridization on Affymetrix microarrays.

2013-08-21 | E-GEOD-50039 | biostudies-arrayexpress

mRNA microarray analysis on HepG2 cells exposed to Grpahene oxide (GO) and reduced graphene oxide (rGO) Nanomaterials

2013-08-21 | GSE50039 | GEO

Graphene Oxide/Styrene-Butadiene Latex Hybrid Aerogel with Improved Mechanical Properties by PEI Grafted GO and CNT.

Project description:Graphene oxide aerogel (GOA) has wide application prospects due to its low density and high porosity. However, the poor mechanical properties and unstable structure of GOA have limited its practical applications. In this study, polyethyleneimide (PEI) was used to graft onto the surface of GO and carbon nanotubes (CNTs) to improve compatibility with polymers. Composite GOA was prepared by adding styrene-butadiene latex (SBL) to the modified GO and CNTs. The synergistic effect of PEI and SBL, resulted in an aerogel with excellent mechanical properties, compressive resistance, and structural stability. When the ratio of SBL to GO and GO to CNTs was 2:1 and 7:3, respectively, the obtained aerogel performance was the best, and the maximum compressive stress was 784.35% higher than that of GOA. The graft of PEI on the surface of GO and CNT could improve the mechanical properties of the aerogel, with greater improvements observed with grafting onto the surface of GO. Compared with GO/CNT/SBL aerogel without PEI grafting, the maximum stress of GO/CNT-PEI/SBL aerogel increased by 5.57%, that of GO-PEI/CNT/SBL aerogel increased by 20.25%, and that of GO-PEI/CNT-PEI/SBL aerogel increased by 28.99%. This work not only provided a possibility for the practical application of aerogel, but also steered the research of GOA in a new direction.

| S-EPMC10217333 | biostudies-literature

Removal of Dyes Using Graphene Oxide (GO) Mixed Matrix Membranes.

Project description:The application of membrane technology to remove pollutant dyes in industrial wastewater is a significant development today. The modification of membranes to improve their properties has been shown to improve the permeation flux and removal efficiency of the membrane. Therefore, in this work, graphene oxide nanoparticles (GO-NPs) were used to modify the polyethersulfone (PES) membrane and prepare mixed matrix membranes (MMMs). This research is dedicated to using two types of very toxic dyes (Acid Black and Rose Bengal) to study the effect of GO on PES performance. The performance and antifouling properties of the new modified membrane were studied using the following: FTIR, SEM, AFM, water permeation flux, dye removal and fouling, and by investigating the influence of GO-NPs on the structure. After adding 0.5 wt% of GO, the contact angle was the lowest (39.21°) and the permeable flux of the membrane was the highest. The performance of the ultrafiltration (UF) membrane displayed a rejection rate higher than 99% for both dyes. The membranes showed the highest antifouling property at a GO concentration of 0.5 wt%. The long-term operation of the membrane fabricated from 0.5 wt% GO using two dyes improved greatly over 26 d from 14 d for the control membrane, therefore higher flux can be preserved.

| S-EPMC7760904 | biostudies-literature

Biomimetic Cell Stimulation with Graphene Oxide Antigen Presenting Platform (GO-APP) for Developing T Cell-Based Therapies

Project description:This SuperSeries is composed of the SubSeries listed below.

2024-07-01 | GSE233291 | GEO

Highly Sensitive Detection for Mercury Ions Using Graphene Oxide (GO) Sensors.

Project description:The mercury ion (Hg2+) is one of the heavy metal ions, and its presence in trace amounts can cause physiological damage to an organism. Traditional methods of Hg2+ detection have been useful but have also had numerous limitations and challenges, and as a result, it is important to design new and sophisticated methods that can aid in the detection of Hg2+. In this paper, two fluorescent dyes, carboxyfluorescein (FAM) and SYBR Green I, were used to label and intercalate DNA probes immobilized on the surface of graphene oxide (GO) for sensors to detect Hg2+. FAM and SYBR Green I dye share close excitation and emission wavelength spectra, which can promote and amplify the detection of signals, and also increase the limit of detection (LOD). The results showed that the limit of detection in this method was 0.53 nM. Moreover, when the sensors with double amino groups on the surface of GO were carried out to detect Hg2+, a limit of detection was improved to 0.43 nM. The sensors were then applied in the real sample. The results show that this method has a promising potential in Hg2+ detection.

| S-EPMC8470607 | biostudies-literature

Graphene oxide incorporated waste wool/PAN hybrid fibres.

Project description:This work aims to evaluate the potential of using textile waste in smart textile applications in the form of a hybrid fibre with electrical properties. The bio-based electrically conductive fibres were fabricated from waste wool and polyacrylonitrile (PAN) via wet spinning with different wool content. The control PAN and hybrid fibre produced with the highest amount of wool content (25% w/v) were coated with graphene oxide (GO) using the "brushing and drying" technique. The GO nanosheets coated control PAN and wool/PAN hybrid fibres were chemically reduced through hydrazine vapour exposure. The Fourier transform infrared spectroscopy showed the presence of both protein and nitrile peaks in the wool/PAN hybrid fibres, although the amide I and amide A groups had disappeared, due to the dissolution of wool. The morphological and structural analysis revealed effective coating and reduction of the fibres through GO nanosheets and hydrazine, respectively. The hybrid fibre showed higher electrical conductivity (~ 180 S/cm) compared to the control PAN fibres (~ 95 S/cm), confirming an effective bonding between the hydroxyl and carboxylic groups of the GO sheets and the amino groups of wool evidenced by chemical analysis. Hence, the graphene oxide incorporated wool/PAN hybrid fibres may provide a promising solution for eco-friendly smart textile applications.

| S-EPMC8187707 | biostudies-literature

Highly Efficient Electrospun Silver Decorated Graphene Oxide Nanocomposites on Poly(vinylidene fluoride) (PVDF@GO-Ag) Hybrid Membrane for Reduction of 4-Nitrophenol.

Project description:Graphene oxide-silver poly(vinylidene fluoride) membranes (PVDF@GO-Ag) were successfully synthesized by the electrospinning method, which exhibited a high catalytic activity using the hydrogenation of 4-nitrophenol (4-NP) as a model reaction in a batch reaction study. The hybrid membranes doped with 1 wt% GO and 2 wt% Ag (PVDF-1-2) exhibited the most desired performance for the catalytic reduction of 4-NP. Importantly, PVDF-1-2 exhibited excellent cycling stability in 10 catalytic cycle tests and was highly amenable to separation. This property effectively addresses the significant challenges associated with the practical application of nanocatalysts. Furthermore, density-functional theory (DFT) calculations have demonstrated that the GO-Ag nanocomposites exhibit the strongest adsorption capacity for 4-NP- when a specific ratio of GO and Ag is achieved, accompanied by the loading of Ag nanoclusters onto GO. Additionally, the study demonstrated that an increase in temperature significantly accelerated the reaction rate, in line with the van't Hoff rule. This study provides an effective and environmentally friendly solution for the treatment of 4-NP in wastewater.

| S-EPMC11357165 | biostudies-literature

Reduced graphene oxide enwrapped phosphors for long-term thermally stable phosphor converted white light emitting diodes.

Project description:The long-term instability of the presently available best commercial phosphor-converted light-emitting diodes (pcLEDs) is the most serious obstacle for the realization of low-cost and energy-saving lighting applications. Emission from pcLEDs starts to degrade after approximately 200?h of operation because of thermal degradation of the phosphors. We propose a new strategy to overcome this thermal degradation problem of phosphors by wrapping the phosphor particles with reduced graphene oxide (rGO). Through the rGO wrapping, we have succeeded in controlling the thermal degradation of phosphors and improving the stability of fabricated pcLEDs. We have fabricated pcLEDs with long-term stability that maintain nearly 98% of their initial luminescence emission intensity even after 800?h of continuous operation at 85?°C and 85% relative humidity. The pcLEDs fabricated using SrBaSi2O2N2:Eu2+ phosphor particles wrapped with reduced graphene oxide are thermally stable because of enhanced heat dissipation that prevents the ionization of Eu2+ to Eu3+. We believe that this technique can be applied to other rare-earth doped phosphors for the realization of highly efficient and stable white LEDs.

| S-EPMC5037423 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data