Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Preparation, Mechanical and Thermal Properties of Cement Board with Expanded Perlite Based Composite Phase Change Material for Improving Buildings Thermal Behavior.

ABSTRACT: Here we demonstrate the mechanical properties, thermal conductivity, and thermal energy storage performance of construction elements made of cement and form-stable PCM-Rubitherm® RT 28 HC (RT28)/expanded perlite (EP) composite phase change materials (PCMs). The composite PCMs were prepared by adsorbing RT28 into the pores of EP, in which the mass fraction of RT28 should be limited to be no more than 40 wt %. The adsorbed RT28 is observed to be uniformly confined into the pores of EP. The phase change temperatures of the RT28/EP composite PCMs are very close to that of the pure RT28. The apparent density and compression strength of the composite cubes increase linearly with the mass fraction of RT28. Compared with the thermal conductivity of the boards composed of cement and EP, the thermal conductivities of the composite boards containing RT28 increase by 15%-35% with the mass fraction increasing of RT28. The cubic test rooms that consist of six boards were built to evaluate the thermal energy storage performance, it is found that the maximum temperature different between the outside surface of the top board with the indoor temperature using the composite boards is 13.3 °C higher than that of the boards containing no RT28. The thermal mass increase of the built environment due to the application of composite boards can contribute to improving the indoor thermal comfort and reducing the energy consumption in the buildings.

SUBMITTER: Ye R

PROVIDER: S-EPMC5458928 | biostudies-other | 2015 Nov

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Influence of Granulometry on Thermal and Mechanical Properties of Cement Mortars Containing Expanded Perlite as a Lightweight Aggregate.

Project description:This research aims at clarifying the influence of the granulometry of expanded perlite, on the thermal conductivity, structural strength, density, and water absorption of lightweight mortars. Three original perlite gradations have been obtained and three pairs of twin test mortars have been tested with those gradations. SEM tests have also been run to clarify the interaction, at a microscopic level, between the expanded perlite and the cement grouting. The results indicate that the mere manipulation of the granulometry may have a considerable and very beneficial effect on the mixture's properties, such as thermal conductivity and water absorption.

| S-EPMC6926826 | biostudies-literature

Building Energy Storage Panel Based on Paraffin/Expanded Perlite: Preparation and Thermal Performance Study.

Project description:This study is focused on the preparation and performance of a building energy storage panel (BESP). The BESP was fabricated through a mold pressing method based on phase change material particle (PCMP), which was prepared in two steps: vacuum absorption and surface film coating. Firstly, phase change material (PCM) was incorporated into expanded perlite (EP) through a vacuum absorption method to obtain composite PCM; secondly, the composite PCM was immersed into the mixture of colloidal silica and organic acrylate, and then it was taken out and dried naturally. A series of experiments, including differential scanning calorimeter (DSC), scanning electron microscope (SEM), best matching test, and durability test, have been conducted to characterize and analyze the thermophysical property and reliability of PCMP. Additionally, the thermal performance of BESP was studied through a dynamic thermal property test. The results have showed that: (1) the surface film coating procedure can effectively solve the leakage problem of composite phase change material prepared by vacuum impregnation; (2) the optimum adsorption ratio for paraffin and EP was 52.5:47.5 in mass fraction, and the PCMP has good thermal properties, stability, and durability; and (3) in the process of dynamic thermal performance test, BESP have low temperature variation, significant temperature lagging, and large heat storage ability, which indicated the potential of BESP in the application of building energy efficiency.

| S-EPMC5456498 | biostudies-other

The Heat Conductivity Properties of Hemp-Lime Composite Material Used in Single-Family Buildings.

Project description:The main goal of the paper is to calculate the heat conductivity for three experimental hemp-lime composites used for structural construction purposes with the use of the experimental stand inside two compartments. Due to current construction trends, we are constantly searching for eco-friendly materials that have a low carbon footprint. This is the case of the analyzed material, and additional thermographic heat distribution inside the material during a fire resistance test proves that it is also a perfect insulation material, which could be applied in addition of popular isolating materials. This paper presents the results of certain hemp-lime composite studies and the potential for using hemp-lime composite for the structural construction industry. Hemp-lime composite heat transfer coefficient, fire resistance, and bulk density properties are compared to those of other commonly used construction materials. The obtained results show that the material together with supporting beams made of other biodegradable materials can be the perfect alternative for other commonly used construction materials.

| S-EPMC7079651 | biostudies-literature

Novel Magnetic-to-Thermal Conversion and Thermal Energy Management Composite Phase Change Material.

Project description:Superparamagnetic materials have elicited increasing interest due to their high-efficiency magnetothermal conversion. However, it is difficult to effectively manage the magnetothermal energy due to the continuous magnetothermal effect at present. In this study, we designed and synthesized a novel Fe₃O₄/PEG/SiO₂ composite phase change material (PCM) that can simultaneously realize magnetic-to-thermal conversion and thermal energy management because of outstanding thermal energy storage ability of PCM. The composite was fabricated by in situ doping of superparamagnetic Fe₃O₄ nanoclusters through a simple sol⁻gel method. The synthesized Fe₃O₄/PEG/SiO₂ PCM exhibited good thermal stability, high phase change enthalpy, and excellent shape-stabilized property. This study provides an additional promising route for application of the magnetothermal effect.

| S-EPMC6404046 | biostudies-literature

Polymer-Cement Composites Containing Waste Perlite Powder.

Project description:Polymer-cement composites (PCCs) are materials in which the polymer and mineral binder create an interpenetrating network and co-operate, significantly improving the performance of the material. On the other hand, the need for the utilization of waste materials is a demand of sustainable construction. Various mineral powders, such as fly ash or blast-furnace slag, are successfully used for the production of cement and concrete. This paper deals with the use of perlite powder, which is a burdensome waste from the process of thermal expansion of the raw perlite, as a component of PCCs. The results of the testing of the mechanical properties of the composite and some microscopic observations are presented, indicating that there is a possibility to rationally and efficiently utilize waste perlite powder as a component of the PCC. This would lead to creating a new type of building material that successfully meets the requirements of sustainable construction.

| S-EPMC5456624 | biostudies-other

Multi-layered cement-hydrogel composite with high toughness, low thermal conductivity, and self-healing capability.

Project description:The inherent quasi-brittleness of cement-based materials, due to the disorder of their hydration products and pore structures, present significant challenges for directional matrix toughening. In this work, a rigid layered skeleton of cement slurry was prepared using a simplified ice-template method, and subsequently flexible polyvinyl alcohol hydrogel was introduced into the unidirectional pores between neighboring cement platelets, resulting in the formation of a multi-layered cement-based composite. A toughness improvement of over 175 times is achieved by the implantation of such hard-soft alternatively layered microstructure. The toughening mechanism is the stretching of hydrogels at the nano-scale and deflections of micro-cracks at the interfaces, which avoid stress concentration and dissipate huge energy. Furthermore, this cement-hydrogel composite also exhibits a low thermal conductivity (around 1/10 of normal cement) and density, high specific strength and self-healing properties, which can be used in thermal insulation, seismic high-rise buildings and long-span bridges.

| S-EPMC10257691 | biostudies-literature

Thermal imaging dataset from composite material academic samples inspected by pulsed thermography.

Project description:This paper presents a thermal imaging dataset from composite material samples (carbon and glass fiber reinforced plastic) that were inspected by pulsed thermography with the goal of detecting and characterizing subsurface defective zones (Teflon inserts representing delaminations between plies). The pulsed thermography experiment was applied to 6 academic plates (inspected from both sides) all having the dimensions of 300 mm x 300 mm x 2 mm and same distribution of defects but made of different materials: three plates on carbon fiber-reinforced plastic (CFRP) and three plates made on glass fiber reinforced plastic (GFRP) specimens with three different geometries: planar, curved and trapezoidal. Each plate contains 25 inserts having length/depth ratios between 1.7 and 75. Two FX60 BALCAR photographic flashes (6.2 kJ per flash) were used to generate the heat pulse (2 ms duration), an X6900 FLIR infrared camera using ResearchIR software to record the thermal images and a custom-built software/control unit to synchronize data recording with pulse generation. Finally, the dataset proposed consists of 12 sequences of approximately 2000 images of 512?×?512 pixels each.

| S-EPMC7508994 | biostudies-literature

Bi-Material Negative Thermal Expansion Inverted Trapezoid Lattice based on A Composite Rod.

Project description:Negative thermal expansion (NTE) lattices are widely used in aerospace engineering where the structures experience large temperature variation. However, the available range of NTE of the current lattices is quite narrow, which severely limits their engineering application. In this paper, we report an inverted trapezoid lattice (ITL) with large NTE. The NTE of the ITL is 2.6 times that of a typical triangular lattice with the same height and hypotenuse angle. Theoretically, with a pin-jointed assumption, the ITL can improve the NTE by order of magnitude if the length ratio of the composite rod is changed. In the presented ITL, a composite rod is utilized as the base of the ITL. The composite rod has large inner NTE. The inverted trapezoid structure converts the inner NTE to the vertical direction contraction and obtains an extra NTE. Finite element simulations and experimental verification by interferometric measurement were conducted to verify the large thermal expansion of the ITL.

| S-EPMC6829452 | biostudies-literature

A lauric acid-hybridized bentonite composite phase-changing material for thermal energy storage.

Project description:In this study, a form-stable composite phase-changing material (PCM) was synthesised by a vacuum impregnation method. Natural Na-bentonite and lauric acid (LA) were used as the supporting material and PCM, respectively. In addition, flake graphite (FG) was used for enhancing the thermal conductivity of the form-stable composite PCM, besides for blocking the leakage of the PCM. Notably, with the addition of FG, the period of melting and freezing of the composite PCM decreased to a certain extend. Meanwhile, the heat-transfer characteristic of the composite increased. Moreover, the as-prepared form-stable composite PCM showed good thermal reliability after 200 cycles of thermal-cold treatment and has the potential to be used in thermal energy storage systems.

| S-EPMC9055355 | biostudies-literature

Preparation of Advanced CuO Nanowires/Functionalized Graphene Composite Anode Material for Lithium Ion Batteries.

Project description:The copper oxide (CuO) nanowires/functionalized graphene (f-graphene) composite material was successfully composed by a one-pot synthesis method. The f-graphene synthesized through the Birch reduction chemistry method was modified with functional group "-(CH?)?COOH", and the CuO nanowires (NWs) were well dispersed in the f-graphene sheets. When used as anode materials in lithium-ion batteries, the composite exhibited good cyclic stability and decent specific capacity of 677 mA·h·g-1 after 50 cycles. CuO NWs can enhance the lithium-ion storage of the composites while the f-graphene effectively resists the volume expansion of the CuO NWs during the galvanostatic charge/discharge cyclic process, and provide a conductive paths for charge transportation. The good electrochemical performance of the synthesized CuO/f-graphene composite suggests great potential of the composite materials for lithium-ion batteries anodes.

| S-EPMC5344618 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data