Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Doped Calcium Silicate Ceramics: A New Class of Candidates for Synthetic Bone Substitutes.

ABSTRACT: Doped calcium silicate ceramics (DCSCs) have recently gained immense interest as a new class of candidates for the treatment of bone defects. Although calcium phosphates and bioactive glasses have remained the mainstream of ceramic bone substitutes, their clinical use is limited by suboptimal mechanical properties. DCSCs are a class of calcium silicate ceramics which are developed through the ionic substitution of calcium ions, the incorporation of metal oxides into the base binary xCaO-ySiO₂ system, or a combination of both. Due to their unique compositions and ability to release bioactive ions, DCSCs exhibit enhanced mechanical and biological properties. Such characteristics offer significant advantages over existing ceramic bone substitutes, and underline the future potential of adopting DCSCs for clinical use in bone reconstruction to produce improved outcomes. This review will discuss the effects of different dopant elements and oxides on the characteristics of DCSCs for applications in bone repair, including mechanical properties, degradation and ion release characteristics, radiopacity, and biological activity (in vitro and in vivo). Recent advances in the development of DCSCs for broader clinical applications will also be discussed, including DCSC composites, coated DCSC scaffolds and DCSC-coated metal implants.

SUBMITTER: No YJ

PROVIDER: S-EPMC5459133 | biostudies-other | 2017 Feb

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Fibroblasts Mediate Ectopic Bone Formation of Calcium Phosphate Ceramics.

Project description:Heterogeneity of fibroblasts directly affects the outcome of tissue regeneration; however, whether bioactive ceramics regulate bone regeneration through fibroblasts is unclear. Ectopic bone formation model with biphasic calcium phosphate (BCP) implantation was used to investigate the temporal and spatial distribution of fibroblasts around ceramics. The effect of BCP on L929 fibroblasts was evaluated by EdU assay, transwell assay, and qRT-PCR. Further, the effect of its conditioned medium on osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) was confirmed by ALP staining. SEM and XRD results showed that BCP contained abundant micro- and macro-pores and consisted of hydrogen-apatite (HA) and β-tricalcium phosphate (β-TCP) phases. Subsequently, BCP implanted into mice muscle successfully induced osteoblasts and bone formation. Fibroblasts labelled by vimentin gathered around BCP at 7 days and peaked at 14 days post implantation. In vitro, BCP inhibited proliferation of L929 fibroblast but promoted its migration. Moreover, expression of Col1a1, Bmp2, and Igf1 in L929 treated by BCP increased significantly while expression of Tgfb1 and Acta did not change. ALP staining further showed conditioned media from L929 fibroblasts treated by BCP could enhance osteogenic differentiation of BMSCs. In conclusion, fibroblasts mediate ectopic bone formation of calcium phosphate ceramics.

| S-EPMC9000332 | biostudies-literature

Osteoinductive ceramics as a synthetic alternative to autologous bone grafting.

Project description:Biomaterials can be endowed with biologically instructive properties by changing basic parameters such as elasticity and surface texture. However, translation from in vitro proof of concept to clinical application is largely missing. Porous calcium phosphate ceramics are used to treat small bone defects but in general do not induce stem cell differentiation, which is essential for regenerating large bone defects. Here, we prepared calcium phosphate ceramics with varying physicochemical and structural characteristics. Microporosity correlated to their propensity to stimulate osteogenic differentiation of stem cells in vitro and bone induction in vivo. Implantation in a large bone defect in sheep unequivocally demonstrated that osteoinductive ceramics are equally efficient in bone repair as autologous bone grafts. Our results provide proof of concept for the clinical application of "smart" biomaterials.

| S-EPMC2922269 | biostudies-literature

3D printed scaffolds of calcium silicate-doped ?-TCP synergize with co-cultured endothelial and stromal cells to promote vascularization and bone formation.

Project description:Synthetic bone scaffolds have potential application in repairing large bone defects, however, inefficient vascularization after implantation remains the major issue of graft failure. Herein, porous ?-tricalcium phosphate (?-TCP) scaffolds with calcium silicate (CS) were 3D printed, and pre-seeded with co-cultured human umbilical cord vein endothelial cells (HUVECs) and human bone marrow stromal cells (hBMSCs) to construct tissue engineering scaffolds with accelerated vascularization and better bone formation. Results showed that in vitro ?-TCP scaffolds doped with 5% CS (5%CS/?-TCP) were biocompatible, and stimulated angiogenesis and osteogenesis. The results also showed that 5%CS/?-TCP scaffolds not only stimulated co-cultured cells angiogenesis on Matrigel, but also stimulated co-cultured cells to form microcapillary-like structures on scaffolds, and promoted migration of BMSCs by stimulating co-cultured cells to secrete PDGF-BB and CXCL12 into the surrounding environment. Moreover, 5%CS/?-TCP scaffolds enhanced vascularization and osteoinduction in comparison with ?-TCP, and synergized with co-cultured cells to further increase early vessel formation, which was accompanied by earlier and better ectopic bone formation when implanted subcutaneously in nude mice. Thus, our findings suggest that porous 5%CS/?-TCP scaffolds seeded with co-cultured cells provide new strategy for accelerating tissue engineering scaffolds vascularization and osteogenesis, and show potential as treatment for large bone defects.

| S-EPMC5514115 | biostudies-literature

Calcium sulfate-Cu<sup>2+</sup> delivery system improves 3D-Printed calcium silicate artificial bone to repair large bone defects.

Project description:There are still limitations in artificial bone materials used in clinical practice, such as difficulty in repairing large bone defects, the mismatch between the degradation rate and tissue growth, difficulty in vascularization, an inability to address bone defects of various shapes, and risk of infection. To solve these problems, our group designed stereolithography (SLA) 3D-printed calcium silicate artificial bone improved by a calcium sulfate-Cu2+ delivery system. SLA technology endows the scaffold with a three-dimensional tunnel structure to induce cell migration to the center of the bone defect. The calcium sulfate-Cu2+ delivery system was introduced to enhance the osteogenic activity of calcium silicate. Rapid degradation of calcium sulfate (CS) induces early osteogenesis in the three-dimensional tunnel structure. Calcium silicate (CSi) which degrades slowly provides mechanical support and promotes bone formation in bone defect sites for a long time. The gradient degradation of these two components is perfectly matched to the rate of repair in large bone defects. On the other hand, the calcium sulfate delivery system can regularly release Cu2+ in the temporal and spatial dimensions, exerting a long-lasting antimicrobial effect and promoting vascular growth. This powerful 3D-printed calcium silicate artificial bone which has rich osteogenic activity is a promising material for treating large bone defects and has excellent potential for clinical application.

| S-EPMC10634439 | biostudies-literature

Rheological and Mechanical Properties of Thermoresponsive Methylcellulose/Calcium Phosphate-Based Injectable Bone Substitutes.

Project description:In this study, a novel injectable bone substitute (IBS) was prepared by incorporating a bioceramic powder in a polymeric solution comprising of methylcellulose (MC), gelatin and citric acid. Methylcellulose was utilized as the polymeric matrix due to its thermoresponsive properties and biocompatibility. 2.5 wt % gelatin and 3 wt % citric acid were added to the MC to adjust the rheological properties of the prepared IBS. Then, 0, 20, 30 and 50 wt % of the bioceramic component comprising tetracalcium phosphate/hydroxyapatite (TTCP/HA), dicalcium phosphate dehydrate (DCPD) and calcium sulfate dehydrate (CSD) were added into the prepared polymeric component. The prepared IBS samples had a chewing gum-like consistency. IBS samples were investigated in terms of their chemical structure, rheological characteristics, and mechanical properties. After that, in vitro degradation studies were carried out by measurement of pH and % remaining weight. Viscoelastic characteristics of the samples indicated that all of the prepared IBS were injectable and they hardened at approximately 37 °C. Moreover, with increasing wt % of the bioceramic component, the degradation rate of the samples significantly reduced and the mechanical properties were improved. Therefore, the experimental results indicated that the P50 mix may be a promising candidates to fill bone defects and assist bone recovery for non-load bearing applications.

| S-EPMC5951488 | biostudies-literature

Thermal Evolutions to Glass-Ceramics Bearing Calcium Tungstate Crystals in Borate Glasses Doped with Photoluminescent Eu3+ Ions.

Project description:Thermal evolutions of calcium-tungstate-borate glasses were investigated for the development of luminescent glass-ceramics by using Eu3+ dopant in a borate glass matrix with calcium tungstate, which was expected to have a combined character of glass and ceramics. This study revealed that single-phase precipitation of CaWO4 crystals in borate glass matrix was possible by heat-treatment at a temperature higher than glass transition temperature Tg for (100-x) (33CaO-67B2O3)-xCa3WO6 (x = 8-15 mol%). Additionally, the crystallization of CaWO4 was found by Raman spectroscopy due to the formation of W=O double bondings of WO4 tetrahedra in the pristine glass despite starting with the higher calcium content of Ca3WO6. Eu3+ ions were excluded from the CaWO4 crystals and positioned in the borate glass phase as a stable site for them, which provided local environments in higher symmetry around Eu3+ ions.

| S-EPMC7922195 | biostudies-literature

Silver-Doped Calcium Phosphate Bone Cements with Antibacterial Properties.

Project description:Calcium phosphate bone cements (CPCs) with antibacterial properties are demanded for clinical applications. In this study, we demonstrated the use of a relatively simple processing route based on preparation of silver-doped CPCs (CPCs-Ag) through the preparation of solid dispersed active powder phase. Real-time monitoring of structural transformations and kinetics of several CPCs-Ag formulations (Ag = 0 wt %, 0.6 wt % and 1.0 wt %) was performed by the Energy Dispersive X-ray Diffraction technique. The partial conversion of ?-tricalcium phosphate (TCP) phase into the dicalcium phosphate dihydrate (DCPD) took place in all the investigated cement systems. In the pristine cement powders, Ag in its metallic form was found, whereas for CPC-Ag 0.6 wt % and CPC-Ag 1.0 wt % cements, CaAg(PO?)? was detected and Ag (met.) was no longer present. The CPC-Ag 0 wt % cement exhibited a compressive strength of 6.5 ± 1.0 MPa, whereas for the doped cements (CPC-Ag 0.6 wt % and CPC-Ag 1.0 wt %) the reduced values of the compressive strength 4.0 ± 1.0 and 1.5 ± 1.0 MPa, respectively, were detected. Silver-ion release from CPC-Ag 0.6 wt % and CPC-Ag 1.0 wt % cements, measured by the Atomic Emission Spectroscopy, corresponds to the average values of 25 µg/L and 43 µg/L, respectively, rising a plateau after 15 days. The results of the antibacterial test proved the inhibitory effect towards pathogenic Escherichia coli for both CPC-Ag 0.6 wt % and CPC-Ag 1.0 wt % cements, better performances being observed for the cement with a higher Ag-content.

| S-EPMC4932467 | biostudies-literature

A New Biphasic Dicalcium Silicate Bone Cement Implant.

Project description:This study aimed to investigate the processing parameters and biocompatibility of a novel biphasic dicalcium silicate (C₂S) cement. Biphasic α´L + β-C₂Sss was synthesized by solid-state processing, and was used as a raw material to prepare the cement. In vitro bioactivity and biocompatibility studies were assessed by soaking the cement samples in simulated body fluid (SBF) and human adipose stem cell cultures. Two critical-sized defects of 6 mm Ø were created in 15 NZ tibias. A porous cement made of the high temperature forms of C₂S, with a low phosphorous substitution level, was produced. An apatite-like layer covered the cement's surface after soaking in SBF. The cell attachment test showed that α´L + β-C₂Sss supported cells sticking and spreading after 24 h of culture. The cement paste (55.86 ± 0.23) obtained higher bone-to-implant contact (BIC) percentage values (better quality, closer contact) in the histomorphometric analysis, and defect closure was significant compared to the control group (plastic). The residual material volume of the porous cement was 35.42 ± 2.08% of the initial value. The highest BIC and bone formation percentages were obtained on day 60. These results suggest that the cement paste is advantageous for initial bone regeneration.

| S-EPMC5551801 | biostudies-other

Improvement of Metal-Doped β-TCP Scaffolds for Active Bone Substitutes via Ultra-Short Laser Structuring.

Project description:Various efforts have been made to develop antibacterial biomaterials capable of also sustaining bone remodulation to be used as bone substitutes and reduce patient infection rates and related costs. In this work, beta-tricalcium phosphate (β-TCP) was chosen due to its known biocompatibility and use as a bone substitute. Metal dopants were incorporated into the crystal structure of the β-TCP, and disks were produced from this material. Magnesium and strontium, as well as copper and silver, were chosen as dopants to improve the osteogenic and antibacterial properties, respectively. The surface of the β-TCP samples was further modified using a femtosecond laser system. Grid and line patterns were produced on the plates' surface via laser ablation, creating grooves with depths lower than 20 μm and widths between 20 and 40 μm. Raman and FTIR analysis confirmed that laser ablation did not result in the degradation or phase change of the materials, making it suitable for surface patterning. Laser ablation resulted in increased hydrophilicity of the materials, as the control samples (non-ablated samples) have WCA values ranging from 70° to 93° and become, upon laser ablation, superwicking surfaces. Confocal measurements show an increase in specific surface area of 50% to 200% compared to the control. Overall, the results indicate the potential of laser ablation to improve the surface characteristics of β-TCP, which may lead to an improvement in the antibacterial and osteogenic properties of the produced materials.

| S-EPMC10741177 | biostudies-literature

Role of magnesium-doped calcium sulfate and β-tricalcium phosphate composite ceramics in macrophage polarization and osteo-induction.

Project description:In the current study, we explored the role of Mg2+-doped CaSO4/β-TCP composite biopolymer in regulating macrophage polarization and its relation with enhanced osteogenic differentiation of periodontal ligament stem cells. Furthermore, mechanism underling the regulation of macrophage polarization by CaSO4/β-TCP was evaluated. Mg2+-doped CaSO4/β-TCP composite was characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). Macrophage polarization was characterized using flow cytometry analysis. Macrophage morphometric analysis was conducted by FITC phalloidin staining. Western blot and qRT-PCR assays were used to assess gene expression levels and miRNAs, respectively. SEM morphology of CaSO4/β-TCP ceramic revealed a particle size of 10-50 μm, and XRD spectrum showed that characteristic peak of samples was consistent with that of CaSO4 and β-TCP. Results from flow cytometry evidenced significant upregulation of M2 macrophage markers after adding ceramic biopolymer, indicating the induction of inactivated M0 macrophage polarization to M2 macrophage. Macrophage morphometric analysis revealed development of lamellar pseudopodia on day 7 in CaSO4/β-TCP group. Furthermore, flow cytometry revealed high positivity rate of 90.34% (CD44) and 89.36% (CD146). qRT-PCR results showed that the level of miR-21-5p was significantly decreased in M2 macrophages. Moreover, western blot analysis revealed upregulated expression levels of RUNX2, osterix (Osx), and osteopontin (OPN), and ELISA exhibited increase in cytokine levels (IL-1β, IL-10, TGF-β1, and BMP-2) in the presence of macrophages, indicating the osteogenic differentiation ability of periodontal ligament stem cells. The study evidenced the regulation of macrophage polarization by Mg2+-doped CaSO4/β-TCP composite ceramic and its mediation through lncRNA PVT1/miR-21-5p/smad2 molecular axis.

| S-EPMC9463206 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data