Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Enhanced Photoluminescent Properties and Crystalline Morphology of LiBaPO₄:Tm3+ Phosphor through Microwave Sintering Method.

ABSTRACT: An investigation of the photoluminescent properties and crystalline morphology of blue emitting LiBa1-xPO4:xTm3+ phosphors with various concentrations (x = 0.005-0.030) of Tm3+ ions were synthesized by microwave sintering. For comparison, the LiBa1-xPO4:xTm3+ powders sintered at the same sintering condition but in a conventional furnace were also investigated. LiBaPO₄ without second phase was formed no matter which furnace was used. More uniform grain size distributions are obtained by microwave sintering. When the concentration of Tm3+ ion was x = 0.015, the luminescence intensity reached a maximum value, and then decreased with the increases of the Tm3+ concentration due to concentration quenching effect. The microwave sintering significantly enhanced the emission intensity of LiBa1-xPO4:xTm3+ phosphors. Additionally, the d-d interaction is the key mechanism of concentration quenching for LiBaPO₄:Tm3+. The chromaticity (x, y) for all LiBa1-xPO₄:xTm3+ phosphors are located at (0.16, 0.05), which will be classified as a blue region.

SUBMITTER: Lai HL

PROVIDER: S-EPMC5503088 | biostudies-other | 2016 May

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Microwave-Enhanced Crystalline Properties of Zinc Ferrite Nanoparticles.

Project description:Two series of ZnFe2O4 mixed cubic spinel nanoparticles were prepared by a coprecipitation method, where a solution of Fe3+ and Zn2+ was alkalised by a solution of NaOH. While the first series was prepared by a careful mixing of the two solutions, the microwave radiation was used to enhance the reaction in the other series of samples. The effect of the microwave heating on the properties of the prepared particles is investigated. X-ray powder diffraction (XRD), 57Fe Mössbauer spectroscopy and magnetometry were employed to prove the cubic structure and superparamagnetic behavior of the samples. The particle size in the range of nanometers was investigated by a transmission electron microscopy (TEM), and the N2 adsorption measurements were used to determine the BET area of the samples. The stoichiometry and the chemical purity were proven by energy dispersive spectroscopy (EDS). Additionally, the inversion factor was determined using the low temperature Mössbauer spectra in the external magnetic field. The microwave heating had a significant effect on the mean coherent length. On the other hand, it had a lesser influence on the size and BET surface area of the prepared nanoparticles.

| S-EPMC9457733 | biostudies-literature

Highly efficient phosphor-glass composites by pressureless sintering.

Project description:The development of high-power white light-emitting diodes demands highly efficient and stable all-inorganic color converters. In this respect, phosphor-glass/ceramic composites show great promise as they could combine the merits of high quantum efficiency of phosphors and high chemical and thermal stabilities of glass/ceramic matrices. However, strong interfacial reaction between phosphors and matrices at high temperature results in quantum efficiency loss of the embedded phosphors, and traditional solutions rely on high-pressure consolidation techniques. Here we report the intrinsic inhibition of interfacial reaction by using silica glass rather than multicomponent glasses as the matrix. The embedment of phosphors is achieved via a pressureless sintering method, rendering these color-tunable phosphor-glass composites not only accessible to three-dimensional printing technique, but also highly efficient (internal quantum efficiency >90.0%), thermally stable at 1200?°C and hydrothermally stable at 200?°C. Our results provide a facile and general strategy for developing all-inorganic functional composites.

| S-EPMC7272639 | biostudies-literature

Multiple Energy Transfer in Luminescence-Tunable Single-Phased Phosphor NaGdTiO4: Tm3+, Dy3+, Sm3.

Project description:Advances in solid-state white-light-emitting diodes (WLEDs) necessitate the urgent development of highly efficient single-phase phosphors with tunable photoluminescence properties. Herein, the Tm3+, Dy3+, and Sm3+ ions are incorporated into the orthorhombic NaGdTiO4 (NGT) phosphors, resulting in phosphors that fulfill the aforementioned requirement. The emission spectrum of Tm3+ ions overlaps well with the adsorption spectra of both Dy3+ and Sm3+ ions. Under the excitation at 358 nm, the single-phase NaGdTiO4: Tm3+, Dy3+, Sm3+ phosphor exhibits tunable emission peaks in the blue, yellow, and red regions simultaneously, resulting in an intense white-light emission. The coexisting energy transfer behaviors from Tm3+ to Dy3+ and Sm3+ ions and the energy transfer from Dy3+ to Sm3+ ions are demonstrated to be responsible for this phenomenon. The phosphors with multiple energy transfers enable the development of single-phase white-light-emitting phosphors for phosphor-converted WLEDs.

| S-EPMC7407989 | biostudies-literature

Structural, optical, and magnetic properties of NiMoO4 nanorods prepared by microwave sintering.

Project description:We report on the structural, optical, and magnetic properties of α,β-NiMoO4 nanorods synthesized by annealing the NiMoO4:nH2O precursor at 600°C for 10 minutes in a domestic microwave. The crystalline structure properties of α,β-NiMoO4 were investigated using X-ray diffraction (XRD), Fourier transform infrared (FTIR), and Raman (FT-Raman) spectroscopies. The particle morphologies and size distributions were identified by field emission microscopy (FE-SEM). Experimental data were obtained by magnetization measurements for different applied magnetic fields. Optical properties were analyzed by ultraviolet-visible (UV-vis) and photoluminescence (PL) measurements. Our results revealed that the oxygen atoms occupy different positions and are very disturbed in the lattice and exhibit a particular characteristic related to differences in the length of the chemical bonds (Ni-O and Mo-O) of the cluster structure or defect densities in the crystalline α,β-NiMoO4 nanorods, which are the key to a deeper understanding of the exploitable physical and chemical properties in this study.

| S-EPMC4352760 | biostudies-other

Temperature, Crystalline Phase and Influence of Substrate Properties in Intense Pulsed Light Sintering of Copper Sulfide Nanoparticle Thin Films.

Project description:Intense Pulsed Light sintering (IPL) uses pulsed, visible light to sinter nanoparticles (NPs) into films used in functional devices. While IPL of chalcogenide NPs is demonstrated, there is limited work on prediction of crystalline phase of the film and the impact of optical properties of the substrate. Here we characterize and model the evolution of film temperature and crystalline phase during IPL of chalcogenide copper sulfide NP films on glass. Recrystallization of the film to crystalline covellite and digenite phases occurs at 126?°C and 155?°C respectively within 2-7?seconds. Post-IPL films exhibit p-type behavior, lower resistivity (~10-3-10-4??-cm), similar visible transmission and lower near-infrared transmission as compared to the as-deposited film. A thermal model is experimentally validated, and extended by combining it with a thermodynamic approach for crystal phase prediction and via incorporating the influence of film transmittivity and optical properties of the substrate on heating during IPL. The model is used to show the need to a-priori control IPL parameters to concurrently account for both the thermal and optical properties of the film and substrate in order to obtain a desired crystalline phase during IPL of such thin films on paper and polycarbonate substrates.

| S-EPMC5797230 | biostudies-literature

Formation Mechanism of High-Purity Ti2AlN Powders under Microwave Sintering.

Project description:In the present study, high-purity ternary-phase nitride (Ti2AlN) powders were synthesized through microwave sintering using TiH2, Al, and TiN powders as raw materials. X-ray diffraction (XRD), differential scanning calorimetry (DSC), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) were adopted to characterize the as-prepared powders. It was found that the Ti2AlN powder prepared by the microwave sintering of the 1TiH2/1.15Al/1TiN mixture at 1250 °C for 30 min manifested great purity (96.68%) with uniform grain size distribution. The formation mechanism of Ti2AlN occurred in four stages. The solid-phase reaction of Ti/Al and Ti/TiN took place below the melting point of aluminum and formed Ti2Al and TiN0.5 phases, which were the main intermediates in Ti2AlN formation. Therefore, the present work puts forward a favorable method for the preparation of high-purity Ti2AlN powders.

| S-EPMC7728301 | biostudies-literature

Preparation of 3D printed silicon nitride bioceramics by microwave sintering.

Project description:Silicon nitride (Si3N4) is a bioceramic material with potential applications. Customization and high reliability are the foundation for the widespread application of Si3N4 bioceramics. This study constructed a new microwave heating structure and successfully prepared 3D printed dense Si3N4 materials, overcoming the adverse effects of a large amount of 3D printed organic forming agents on degreasing and sintering processes, further improving the comprehensive performance of Si3N4 materials. Compared with control materials, the 3D printed Si3N4 materials by microwave sintering have the best mechanical performance: bending strength is 928 MPa, fracture toughness is 9.61 MPa·m1/2. Meanwhile, it has the best biocompatibility and antibacterial properties, and cells exhibit the best activity on the material surface. Research has shown that the excellent mechanical performance and biological activity of materials are mainly related to the high-quality degreasing, high cleanliness sintering environment, and high-quality liquid-phase sintering of materials in microwave environments.

| S-EPMC11233628 | biostudies-literature

Mesoporous calcium phosphate bionanomaterials with controlled morphology by an energy-efficient microwave method.

Project description:Calcium phosphate nanomaterials with controllable morphology and mesostructure were synthesized via a rapid and energy efficient microwave method. An increase in aspect ratio from nanoplates to nanorods was achieved by increasing the solvent chain length, accompanied by a subsequent about 23% increase in surface area and porosity. Control of mesoporosity was also achieved by varying the synthesis time and quantity of H2 O in the reaction solvent. Comparative studies were carried out using conventional heating (CON) and room temperature co-precipitation (RT) methods. It was found that microwave synthesis produces nanomaterials with about 50% higher yields, 7.5/1.7 times higher surface area and 3/5 times higher pore volume than RT/CON materials respectively, as well as having a lower distribution of particle size/shape (lower standard deviation values of their dimensions). Furthermore, in vitro protein loading tests of microwave synthesized mesoporous calcium phosphate materials showed an enhanced loading efficiency of bovine serum albumin (3-7 times), as compared with non-mesostructured products from room temperature precipitation, in accordance with their larger surface area and porosity.

| S-EPMC5102653 | biostudies-literature

A Facile Approach to Upconversion Crystalline CaF2:Yb3+,Tm3+@mSiO2 Nanospheres for Tumor Therapy.

Project description:A new facile approach, namely chemical-assisted sol-gel growth (CASGG), was successfully developed to induce the formation of fine CaF2:Yb3+, Tm3+ nanocrytals within the pore channels of mesoporous silica (mSiO2) nanoparticles. A series of upconversion photoluminescent crystalline CaF2:Yb3+,Tm3+@mSiO2 nanospheres with controlled diameters from ~65 nm to ~290 nm were fabricated. All nanospheres presented sound cyto-compatibility and unique ratiometric spectral monitoring functionalities for drug release kinetics. The nanospheres with smallest dimension (UCNP-2.5, ~65nm) induced the most sustained DOX release kinetics. More importantly, the in-vitro study demonstrated that the DOX loaded UCNP-2.5 nanopheres presented the strongest anti-cancer efficacy to MCF-7 human breast cancer cells due to its stronger penetration ability to cell nuclei due to the size effect.

| S-EPMC5072527 | biostudies-literature

Controlling the morphology of side chain liquid crystalline block copolymer thin films through variations in liquid crystalline content.

Project description:In this paper, we describe methods for manipulating the morphology of side-chain liquid crystalline block copolymers through variations in the liquid crystalline content. By systematically controlling the covalent attachment of side chain liquid crystals to a block copolymer (BCP) backbone, the morphology of both the liquid crystalline (LC) mesophase and the phase-segregated BCP microstructures can be precisely manipulated. Increases in LC functionalization lead to stronger preferences for the anchoring of the LC mesophase relative to the substrate and the intermaterial dividing surface. By manipulating the strength of these interactions, the arrangement and ordering of the ultrathin film block copolymer nanostructures can be controlled, yielding a range of morphologies that includes perpendicular and parallel cylinders, as well as both perpendicular and parallel lamellae. Additionally, we demonstrate the utilization of selective etching to create a nanoporous liquid crystalline polymer thin film. The unique control over the orientation and order of the self-assembled morphologies with respect to the substrate will allow for the custom design of thin films for specific nanopatterning applications without manipulation of the surface chemistry or the application of external fields.

| S-EPMC2656565 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data