Solutions for Critical Raw Materials under Extreme Conditions: A Review.
Ontology highlight
ABSTRACT:
SUBMITTER: Grilli ML
PROVIDER: S-EPMC5503360 | biostudies-other | 2017 Mar
REPOSITORIES: biostudies-other
Similar Datasets
Project description:A variety of cutting tool materials are used for the contact mode mechanical machining of components under extreme conditions of stress, temperature and/or corrosion, including operations such as drilling, milling turning and so on. These demanding conditions impose a seriously high strain rate (an order of magnitude higher than forming), and this limits the useful life of cutting tools, especially single-point cutting tools. Tungsten carbide is the most popularly used cutting tool material, and unfortunately its main ingredients of W and Co are at high risk in terms of material supply and are listed among critical raw materials (CRMs) for EU, for which sustainable use should be addressed. This paper highlights the evolution and the trend of use of CRMs) in cutting tools for mechanical machining through a timely review. The focus of this review and its motivation was driven by the four following themes: (i) the discussion of newly emerging hybrid machining processes offering performance enhancements and longevity in terms of tool life (laser and cryogenic incorporation); (ii) the development and synthesis of new CRM substitutes to minimise the use of tungsten; (iii) the improvement of the recycling of worn tools; and (iv) the accelerated use of modelling and simulation to design long-lasting tools in the Industry-4.0 framework, circular economy and cyber secure manufacturing. It may be noted that the scope of this paper is not to represent a completely exhaustive document concerning cutting tools for mechanical processing, but to raise awareness and pave the way for innovative thinking on the use of critical materials in mechanical processing tools with the aim of developing smart, timely control strategies and mitigation measures to suppress the use of CRMs.
| S-EPMC7142786 | biostudies-literature
Project description:BackgroundBiofilm formation has been studied in much detail for a variety of bacterial species, as it plays a major role in the pathogenicity of bacteria. However, only limited information is available for the development of archaeal communities that are frequently found in many natural environments.MethodologyWe have analyzed biofilm formation in three closely related hyperthermophilic crenarchaeotes: Sulfolobus acidocaldarius, S. solfataricus and S. tokodaii. We established a microtitre plate assay adapted to high temperatures to determine how pH and temperature influence biofilm formation in these organisms. Biofilm analysis by confocal laser scanning microscopy demonstrated that the three strains form very different communities ranging from simple carpet-like structures in S. solfataricus to high density tower-like structures in S. acidocaldarius in static systems. Lectin staining indicated that all three strains produced extracellular polysaccharides containing glucose, galactose, mannose and N-acetylglucosamine once biofilm formation was initiated. While flagella mutants had no phenotype in two days old static biofilms of S. solfataricus, a UV-induced pili deletion mutant showed decreased attachment of cells.ConclusionThe study gives first insights into formation and development of crenarchaeal biofilms in extreme environments.
| S-EPMC2991349 | biostudies-literature
Project description:Mass adoption of electric vehicles (EVs) is anticipated in the years ahead, driven primarily by policy incentives, rising incomes, and technological advancements. However, mass adoption is predicated on the availability and affordability of the raw materials required to facilitate this transformation. The implications of material shortages are currently not well understood and previous research tends to be limited by weak representation of technological change, a lack of regional disaggregation, often inflexible and opaque assumptions and drivers, and a failure to place insights in the broader context of the raw materials industries. This paper proposes a CoMIT (Cost, Macro, Infrastructure, Technology) model that can be used to analyse the impact of mass EV adoption on critical raw materials demand and forecasts that, by 2030, demand for vehicles will increase by 27.4%, of which 13.3% will be EVs. The model also predicts large increases in demand for certain base metals, including a 37 and 18-fold increase in demand for cobalt and lithium (relative to 2015 levels), respectively. Without major changes in certain technologies, the cobalt and lithium supply chains could seriously constrain the widespread deployment of EVs. Significant demand increases are also predicted for copper, chrome and aluminium. The results also highlight the importance of China in driving demand for EVs and the critical materials needed to produce them.
| S-EPMC7545311 | biostudies-literature
Project description:Microorganisms must sense their environment and rapidly tune their metabolism to ambient conditions to efficiently use available resources. We have identified a gene encoding a response regulator, NblR, that complements a cyanobacterial mutant unable to degrade its light-harvesting complex (phycobilisome), in response to nutrient deprivation. Cells of the nblR mutant (i) have more phycobilisomes than wild-type cells during nutrient-replete growth, (ii) do not degrade phycobilisomes during sulfur, nitrogen, or phosphorus limitation, (iii) cannot properly modulate the phycobilisome level during exposure to high light, and (iv) die rapidly when starved for either sulfur or nitrogen, or when exposed to high light. Apart from regulation of phycobilisome degradation, NblR modulates additional functions critical for cell survival during nutrient-limited and high-light conditions. NblR does not appear to be involved in acclimation responses that occur only during a specific nutrient limitation. In contrast, it controls at least some of the general acclimation responses; those that occur during any of a number of different stress conditions. NblR plays a pivotal role in integrating different environmental signals that link the metabolism of the cell to light harvesting capabilities and the activities of the photosynthetic apparatus; this modulation is critical for cell survival.
| S-EPMC28011 | biostudies-literature
Project description:Microbial iron reduction is a widespread and ancient metabolism on Earth, and may plausibly support microbial life on Mars and beyond. Yet, the extreme limits of this metabolism are yet to be defined. To investigate this, we surveyed the recorded limits to microbial iron reduction in a wide range of characterized iron-reducing microorganisms (n = 141), with a focus on pH and temperature. We then calculated Gibbs free energy of common microbially mediated iron reduction reactions across the pH-temperature habitability space to identify thermodynamic limits. Comparing predicted and observed limits, we show that microbial iron reduction is generally reported at extremes of pH or temperature alone, but not when these extremes are combined (with the exception of a small number of acidophilic hyperthermophiles). These patterns leave thermodynamically favourable combinations of pH and temperature apparently unoccupied. The empty spaces could be explained by experimental bias, but they could also be explained by energetic and biochemical limits to iron reduction at combined extremes. Our data allow for a review of our current understanding of the limits to microbial iron reduction at extremes and provide a basis to test more general hypotheses about the extent to which biochemistry establishes the limits to life.
| S-EPMC9629499 | biostudies-literature
Project description:Critical Raw Materials (CRMs) require a deep understanding of their societal metabolism, for which robust data and information are needed. However, despite the efforts to build reliable data, some CRMs such as cobalt, are still characterised by lack of data harmonization, lack of connection between datasets, and significant data unavailability. Together with data gaps filling, data quality is a crucial aspect to improve Material Flow Analysis (MFA) and Criticality Assessment (CA). Nevertheless, most of the methodologies for Data Quality Assessment (DQA) are not designed for these tools, but for others, e.g. life cycle assessment. The current research addresses the following challenges; a better understanding of the societal metabolism of CRMs; the development and implementation of DQA in MFA and CA; and a better understanding of the available data related to current cobalt flows in the EU technosphere. The underlying life cycle phases of CRMs within the technosphere were identified, together with 15 key parameters. A new DQA matrix was developed, which was subsequently applied to the full dataset collected for cobalt. The dataset was built considering seven high-end applications of cobalt. More than 300 values were gathered, which were analysed in function of different aspects, such as the country/region, and year. Through the data analysis and the application of the DQA framework, data gaps were identified due to low availability and/or low quality. It was concluded that the main deficiency of cobalt data is its reliability, due to lack of information regarding its generation method, and the incomplete stakeholder coverage.
| S-EPMC7224515 | biostudies-literature
Project description:Non-target metabolomics of lichens exposed to extreme environmental conditions such as pressure and ultraviolet light
2023-07-04 | MSV000092339 | MassIVE
Project description:A copper foil with an extreme extensibility up to 43,684% was obtained without any intermediate annealing by means of asynchronous rolling with high tension. It was found that under the combination of compression, shearing and tension, the copper foil represents a wonderful phenomenon. As the reduction increases, the specimen hardness increases up to a peak value 138 HV0.05 when the foil thickness rolled to around 100??m, and then it decreases down to 78 HV0.05 when the foil thickness rolled to the final size 19??m. It tells us that the strain-softening effect occurs when the foil thickness is rolled down to a threshold level. The experimental results bring us some fresh ideas different with the traditional understanding on the strain-hardening mechanism of metals, which provides an experimental basis to establish the forming mechanism of the thin foil.
| S-EPMC6506452 | biostudies-literature
Project description:With the advent of integrated electronics, microfabrication and novel chemistry, NMR (Nuclear Magnetic Resonance) methods, embodied in miniaturized spectrometers, have found profound uses in recent years that are beyond their conventional niche. In this work, we extend NMR relaxometry on a minute sample below 20??L to challenging environment of 150?°C in temperature and 900?bar in pressure. Combined with a single-board NMR spectrometer, we further demonstrate multidimensional NMR relaxometries capable of resolving compositions of complex fluids. The confluence of HTHP (high-pressure high-temperature) capability, minimal sample volume, and reduced sensor envelop and power budget creates a new class of mobile NMR platforms, bringing the powerful analytical toolkit in a miniaturized footprint to extreme operating conditions.
| S-EPMC6673705 | biostudies-literature