Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Synthesis and Characterization of Bio-Based Polyesters: Poly(2-methyl-1,3-propylene-2,5-furanoate), Poly(isosorbide-2,5-furanoate), Poly(1,4-cyclohexanedimethylene-2,5-furanoate).

ABSTRACT: In the present study, three new biobased furanoate polyesters with potential use in food packaging applications, named poly(isosorbide furanoate) (PIsF), poly(methyl-propylene furanoate) (PMePF) and poly(1,4-cyclohexane-dimethylene 2,5-furanoate) (PCHDMF) were synthesized. As monomers for the preparation of the polyesters, 2,5-furandicarboxylic acid (FDCA) and diols with irregular or complicated structure were used, including isosorbide (IS), 2-methyl-1,3-propanediol (MPD) and 1,4-cyclohexane-dimethanol (CHDM). The polymerization process was carried out via melt polycondensation method. The structural characteristics and thermal behavior of the polymers were studied. The kinetic fragility of the amorphous phase of the polymers was evaluated. The thermal degradation was studied by means of thermogravimetry and a pyrolysis Py-GC/MS (Pyrolysis-Gas Chromatography/Mass Spectroscopy) system to estimate the degradation mechanism.

SUBMITTER: Terzopoulou Z

PROVIDER: S-EPMC5551844 | biostudies-other | 2017 Jul

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Co-Polymers based on Poly(1,4-butylene 2,5-furandicarboxylate) and Poly(propylene oxide) with Tuneable Thermal Properties: Synthesis and Characterization.

Project description:Poly(ether ester)s (PEEs) represent a promising class of segmented co-polymers, nevertheless the synthesis of PEEs based on renewable 2,5-furandicarboxylic acid (FDCA) is still scarce. In this context, a series of poly(1,4-butylene 2,5-furandicarboxylate)-co-poly(poly(propylene oxide) 2,5-furandicarboxylate) co-polyesters with different composition of stiff poly(1,4-butylene 2,5-furandicarboxylate) (PBF) and soft poly(poly(propylene oxide) 2,5-furandicarboxylate) (PPOF) moieties were synthesized, via a two-step bulk polytransesterification reaction. The molar ratio of PBF/PPOF incorporated was varied (10 to 50 mol%) in order to prepare several novel materials with tuned properties. The materials were characterised in detail through several techniques, namely ATR FTIR, ¹H and 13C NMR, TGA, DSC, DMTA and XRD. Their hydrolytic and enzymatic degradation evaluation was also assessed. These new co-polymers showed either a semi-crystalline nature when higher PBF/PPOF ratios were used, and for approximately equal amounts of PBF and PPOF an amorphous co-polyester was obtained instead.

| S-EPMC6356699 | biostudies-literature

Poly(Alkylene 2,5-Thiophenedicarboxylate) Polyesters: A New Class of Bio-Based High-Performance Polymers for Sustainable Packaging.

Project description:In the present study, 100% bio-based polyesters of 2,5-thiophenedicarboxylic acid were synthesized via two-stage melt polycondensation using glycols containing 3 to 6 methylene groups. The so-prepared samples were characterised from the molecular point of view and processed into free-standing thin films. Afterward, both the purified powders and the films were subjected to structural and thermal characterisation. In the case of thin films, mechanical response and barrier properties to O2 and CO2 were also evaluated. From the results obtained, it emerged that the length of glycolic sub-units is an effective tool to modulate the chain mobility and, in turn, the kind and amount of ordered phases developed in the samples. In addition to the usual amorphous and 3D crystalline phases, in all the samples investigated it was possible to evidence a further phase characterised by a lower degree of order (mesophase) than the crystalline one, whose amount is strictly related to the glycol sub-unit length. The relative fraction of all these phases is responsible for the different mechanical and barrier performances. Last, but not least, a comparison between thiophene-based homopolymers and their furan-based homologues was carried out.

| S-EPMC8348809 | biostudies-literature

Solvent-Free One-Shot Synthesis of Thermoplastic Polyurethane Based on Bio-Poly(1,3-propylene succinate) Glycol with Temperature-Sensitive Shape Memory Behavior.

Project description:In this work, a new family of fully biobased thermoplastic polyurethanes (TPUs) with thermo-induced shape memory is developed. First, a series of TPUs were successfully synthesized by the one-shot solvent-free bulk polymerization of bio-poly(1,3-propylene succinate) glycol (PPS) with various molecular weights (M n = 1000, 2000, 3000, and 4000), 1,4-butanediol (BDO), and 4,4'-methylene diphenyl diisocyanate (MDI). These polyurethanes (PUs) are denoted as PPS-x-TPUs (x = 1000, 2000, 3000, and 4000), where x represents the M n of PPS in the polymers. To determine the effect of the molecular weight of the soft segment of PU, all PPS-TPUs were formed with the same hard segment content (32.5 wt %). The soft segment with high molecular weight in PPS-4000-TPU caused a high degree of soft segment entanglement and formed many secondary bonds. PPS-4000-TPU exhibited better mechanical (tensile strength: 64.13 MPa and hardness: 90A) and thermomechanical properties (maximum loading: 2.95 MPa and maximum strain: 144%) than PPS-1000-TPU. At an appropriate shape memory programming temperature, all synthesized PPS-x-TPUs exhibited excellent shape memory behaviors with a fixed shape rate of >99% and a shape recovery rate of >86% in the first round and 95% in the following rounds. Therefore, these bio-TPUs with shape memory have potential for use in smart fabrics.

| S-EPMC7057693 | biostudies-literature

Fabrication of Two Polyester Nanofiber Types Containing the Biobased Monomer Isosorbide: Poly (Ethylene Glycol 1,4-Cyclohexane Dimethylene Isosorbide Terephthalate) and Poly (1,4-Cyclohexane Dimethylene Isosorbide Terephthalate).

Project description:The thermal and mechanical properties of two types of polyester nanofiber, poly (1,4-cyclohexanedimethylene isosorbide terephthalate) (PICT) copolymers and the terpolyester of isosorbide, ethylene glycol, 1,4-cyclohexane dimethanol, and terephthalic acid (PEICT), were investigated. This is the first attempt to fabricate PICT nanofiber via the electrospinning method; comparison with PEICT nanofiber could give greater understanding of eco-friendly nanofibers containing biomass monomers. The nanofibers fabricated from each polymer show similar smooth and thin-and-long morphologies. On the other hand, the polymers exhibited significantly different mechanical and thermal properties; in particular, a higher tensile strength was observed for PICT nanofiber mat than for that of PEICT. We hypothesized that PICT has more trans-configuration than PEICT, resulting in enhancement of its tensile strength, and demonstrated this by Fourier transform infrared spectroscopy. In addition, PICT nanofibers showed clear crystallization behavior upon increased temperature, while PEICT nanofibers showed completely amorphous structure. Both nanofibers have better tensile properties and thermal stability than the typical polyester polymer, implying that they can be utilized in various industrial applications.

| S-EPMC5853689 | biostudies-other

Synthesis and Characterization of In-Situ-Prepared Nanocomposites Based on Poly(Propylene 2,5-Furan Dicarboxylate) and Aluminosilicate Clays.

Project description:Poly(propylene 2,5-furan dicarboxylate) (PPF), or poly(trimethylene 2,5-furan dicarboxylate) (PTF), is a biobased alipharomatic polyester that is expected to replace its fossil-based terephthalate (PPT) and naphthate (PPN) homologues. PPF possesses exceptional gas barrier properties, but its slow crystallization rate might affect its success in specific applications in the future. Therefore, a series of PPF based nanocomposites with the nanoclays Cloisite®-Na (MMT), Cloisite®-20A (MMT 20A), and halloysite nanotubes (HNT) were synthesized via the in situ transterification and polycondensation method. The effect of the nanoclays on the structure, thermal, and crystallization properties of PPF was studied with several methods including infrared spectroscopy (IR), Nuclear Resonance Spectroscopy (¹H-NMR), Wide Angle X-ray Diffraction (WAXD), Thermogravimetric Analysis (TGA), and Differential Scanning Calorimetry (DSC). The insertion of the nanofillers in the polymer matrix altered the crystallization rates, and TGA results showed good thermal stability, since no significant mass loss occurred up to 300 °C. Finally, the degradation mechanism was studied in depth with Pyrolysis-Gas Chromatography/Mass Spectroscopy, and it was found that β-scission is the dominant degradation mechanism.

| S-EPMC6403680 | biostudies-literature

trans-2,5-Di-methyl-piperazine-1,4-diium dinitrate.

Project description:In the structure of the title salt, C6H16N2 (2+)·2NO3 (-), the cations are connected to the anions through bifurcated N-H?(O,O) and weak C-H?O hydrogen bonds, generating corrugated layers parallel to the (100) plane. The organic cation is centrosymmetric and the diprotonated piperazine ring adopts a chair conformation, with the methyl groups occupying equatorial positions.

| S-EPMC4051050 | biostudies-literature

Transparent Polymer Blends of Poly(methyl methacrylate) and Poly(propylene glycol).

Project description:Polymer blends, obtained by polymerization of methyl methacrylate in the presence of poly(propylene glycol), are investigated. Poly(propylene glycol) acts as a plasticizer, significantly lowering poly(methyl methacrylate)'s glass transition temperature and decreasing its elasticity modulus and yield stress. The mixture of methyl methacrylate with poly(propylene glycol) is more stable than its mixture with currently used poly(ethylene glycol), which leads to more uniform distribution and higher possible content of the plasticizer. Unlike low molecular weight plasticizers, poly(propylene glycol) is less prone to migration and exudation during manufacturing process and in use, and has low toxicity. Dynamic mechanical thermal analysis, compression testing and X-ray diffraction were used to investigate how the properties of the material depend on the content and molecular weight of the poly(propylene glycol) in the polymer blend. It was shown that the dependence of the glass transition temperature of methyl methacrylate polymerized in the presence of poly(propylene glycol) on the molar fraction of propylene glycol units is linear, and poly(propylene glycol) with lower molecular weight affects properties of the material stronger than poly(propylene glycol) with higher molecular weight. Therefore, the addition of poly(propylene glycol) allows to control the properties of poly(methyl methacrylate) easily and within wide range.

| S-EPMC9183039 | biostudies-literature

Isotactic and Syndiotactic Alternating Ethylene/Propylene Copolymers Obtained Through Non-Catalytic Hydrogenation of Highly Stereoregular cis-1,4 Poly(1,3-diene)s.

Project description:The homogeneous non-catalytic hydrogenation of cis-1,4 poly(isoprene), isotactic cis-1,4 poly(1,3-pentadiene) and syndiotactic cis-1,4 poly(1,3-pentadiene) with diimide, formed by thermal decomposition of para-toluenesulfonylhydrazide, is examined. Perfectly alternating ethylene/propylene copolymers having different tacticity (i.e., isotactic and syndiotactic), which are difficult to synthesize by stereospecific copolymerization of the corresponding monomers, are obtained. Both isotactic and syndiotactic alternating ethylene/propylene copolymers are amorphous, with very low glass transition temperatures.

| S-EPMC6154095 | biostudies-literature

Synthesis and characterization of 3-methyl-6-[(propyn-yloxy)meth-yl]-1,4-dioxane-2,5-dione.

Project description:The number of known asymmetrically substituted hemilactides, important precursors for obtaining regular derivatives of polylactide polymers, is still limited and structural characterization of most of them is incomplete. In the title racemic 1,4-dioxane-2,5-dione derivative, C9H10O5, the hemilactide heterocycle exhibits a twist-boat conformation. The bulkier propynyloxymethyl group is in an axial position with a gauche conformation for the CH2-O-CH2-C segment. In the crystal, mol-ecules are linked by pairs of C-H?O hydrogen bonds, forming inversion dimers. The dimers are linked by further C-H?O contacts, forming a three-dimensional structure.

| S-EPMC5499287 | biostudies-literature

Poly[bis-(1,3-dimethyl-1,3-diazinan-2-one)(2,5-dioxidoterephthalato)zirconium(IV)].

Project description:In the title coordination polymer, [Zr(C8H2O6)(C6H12N2O)2] n , the Zr(IV) atom, which lies on a crystallographic twofold rotation axis, is coordinated by two O,O'-bidentate 2,5-dioxidoterephthalate (DHTP(4-)) ligands and two O-bonded 1,3-dimethyl-1,3-diazinan-2-one (DMPU) ligands (the latter in a cis orientation) in a distorted ZrO6 octa-hedral geometry. The deprotonated hy-droxy and carb-oxy O atoms of the DHTP(4-) ligand chelate the Zr(IV) ion via a six-membered ring; the dihedral angle between the carboxyl-ate group and the aromatic ring is 19.94?(11)°. The DHTP(4-) ligand is completed by crystallographic inversion symmetry and coordinates to two Zr(IV) atoms, thereby forming polymeric zigzag chains propagating in the c-axis direction.

| S-EPMC3588472 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data