Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Ultra High Strain Rate Nanoindentation Testing.

ABSTRACT: Strain rate dependence of indentation hardness has been widely used to study time-dependent plasticity. However, the currently available techniques limit the range of strain rates that can be achieved during indentation testing. Recent advances in electronics have enabled nanomechanical measurements with very low noise levels (sub nanometer) at fast time constants (20 µs) and high data acquisition rates (100 KHz). These capabilities open the doors for a wide range of ultra-fast nanomechanical testing, for instance, indentation testing at very high strain rates. With an accurate dynamic model and an instrument with fast time constants, step load tests can be performed which enable access to indentation strain rates approaching ballistic levels (i.e., 4000 1/s). A novel indentation based testing technique involving a combination of step load and constant load and hold tests that enables measurement of strain rate dependence of hardness spanning over seven orders of magnitude in strain rate is presented. A simple analysis is used to calculate the equivalent uniaxial response from indentation data and compared to the conventional uniaxial data for commercial purity aluminum. Excellent agreement is found between the indentation and uniaxial data over several orders of magnitude of strain rate.

SUBMITTER: Sudharshan Phani P

PROVIDER: S-EPMC5554044 | biostudies-other | 2017 Jun

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Ultra-high cooling rate utilizing thin film evaporation.

Project description:This research introduces a cell cryopreservation method, which utilizes thin film evaporation and provides an ultra-high cooling rate. The microstructured surface forming the thin film evaporation was fabricated from copper microparticles with an average diameter of 50 μm. Experimental results showed that a cooling rate of approximately 5[Formula: see text]10(4) °C/min was achieved in a temperature range from 10 °C to -187 °C. The current investigation will give birth to a cell cryopreservation method through vitrification with relatively low concentrations of cryoprotectants.

| S-EPMC3460952 | biostudies-other

Human enteroids as a tool to study conventional and ultra-high dose rate radiation

Project description:Radiation therapy, one of the most effective therapies to treat cancer, is highly toxic to healthy tissue. The delivery of radiation at ultra-high dose rates, FLASH radiation therapy (FLASH), has been shown to maintain therapeutic anti-tumor efficacy while sparing normal tissues compared to conventional dose rate irradiation (CONV). Though promising, these studies have been limited mainly to murine models. Here, we leveraged enteroids, three-dimensional cell clusters that mimic the intestine, to study human-specific tissue response to radiation. We observed enteroids have a greater colony growth potential following FLASH compared with CONV. In addition, the enteroids that reformed following FLASH more frequently exhibited proper intestinal polarity. While we did not observe differences in enteroid damage across groups, we did see distinct transcriptomic changes. Specifically, the FLASH enteroids upregulated the expression of genes associated with the WNT-family, cell-cell adhesion, and hypoxia response. These studies validate human enteroids as a model to investigate FLASH and provide further evidence supporting clinical study of this therapy. Insight Box Promising work has been done to demonstrate the potential of ultra-high dose rate radiation (FLASH) to ablate cancerous tissue, while preserving healthy tissue. While encouraging, these findings have been primarily observed using pre-clinical murine and traditional two-dimensional cell culture. This study validates the use of human enteroids as a tool to investigate human-specific tissue response to FLASH. Specifically, the work described demonstrates the ability of enteroids to recapitulate previous in vivo findings, while also providing a lens through which to probe cellular and molecular-level responses to FLASH. The human enteroids described herein offer a powerful model that can be used to probe the underlying mechanisms of FLASH in future studies.

2024-09-16 | GSE275276 | GEO

Uncovering high-strain rate protection mechanism in nacre.

Project description:Under high-strain-rate compression (strain rate approximately 10(3) s(-1)), nacre (mother-of-pearl) exhibits surprisingly high fracture strength vis-à-vis under quasi-static loading (strain rate 10(-3) s(-1)). Nevertheless, the underlying mechanism responsible for such sharply different behaviors in these two loading modes remains completely unknown. Here we report a new deformation mechanism, adopted by nacre, the best-ever natural armor material, to protect itself against predatory penetrating impacts. It involves the emission of partial dislocations and the onset of deformation twinning that operate in a well-concerted manner to contribute to the increased high-strain-rate fracture strength of nacre. Our findings unveil that Mother Nature delicately uses an ingenious strain-rate-dependent stiffening mechanism with a purpose to fight against foreign attacks. These findings should serve as critical design guidelines for developing engineered body armor materials.

| S-EPMC3216628 | biostudies-literature

Ultrahigh high-strain-rate superplasticity in a nanostructured high-entropy alloy.

Project description:Superplasticity describes a material's ability to sustain large plastic deformation in the form of a tensile elongation to over 400% of its original length, but is generally observed only at a low strain rate (~10-4 s-1), which results in long processing times that are economically undesirable for mass production. Superplasticity at high strain rates in excess of 10-2 s-1, required for viable industry-scale application, has usually only been achieved in low-strength aluminium and magnesium alloys. Here, we present a superplastic elongation to 2000% of the original length at a high strain rate of 5 × 10-2 s-1 in an Al9(CoCrFeMnNi)91 (at%) high-entropy alloy nanostructured using high-pressure torsion. The high-pressure torsion induced grain refinement in the multi-phase alloy combined with limited grain growth during hot plastic deformation enables high strain rate superplasticity through grain boundary sliding accommodated by dislocation activity.

| S-EPMC7264233 | biostudies-literature

Surface characterization of an ultra-soft contact lens material using an atomic force microscopy nanoindentation method

Project description:As new ultra-soft materials are being developed for medical devices and biomedical applications, the comprehensive characterization of their physical and mechanical properties is both critical and challenging. To characterize the very low surface modulus of the novel biomimetic lehfilcon A silicone hydrogel contact lens coated with a layer of a branched polymer brush structure, an improved atomic force microscopy (AFM) nanoindentation method has been applied. This technique allows for precise contact-point determination without the effects of viscous squeeze-out upon approaching the branched polymer. Additionally, it allows individual brush elements to be mechanically characterized in the absence of poroelastic effects. This was accomplished by selecting an AFM probe with a design (tip size, geometry, and spring constant) that was especially suited to measuring the properties of soft materials and biological samples. The enhanced sensitivity and accuracy of this method allows for the precise measurement of the very soft lehfilcon A material, which has an extremely low elastic modulus in the surface region (as low as 2 kPa) and extremely high elasticity (nearly 100%) in an aqueous environment. The surface-characterization results not only reveal the ultra-soft nature of the lehfilcon A lens surface but also demonstrate that the elastic modulus exhibits a 30 kPa/200 nm gradient with depth due to the disparity between the modulus of the branched polymer brushes and the SiHy substrate. This surface-characterization methodology may be applied to other ultra-soft materials and medical devices.

| S-EPMC9678857 | biostudies-literature

Ultra-high rate of temperature increment from superparamagnetic nanoparticles for highly efficient hyperthermia.

Project description:The magneto-thermal effect, which represents the conversion of magnetostatic energy to heat from magnetic materials, has been spotlighted for potential therapeutic usage in hyperthermia treatments. However, the realization of its potential has been challenged owing to the limited heating from the magnetic nanoparticles. Here, we explored a new-concept of magneto-thermal modality marked by low-power-driven, fast resonant spin-excitation followed by consequent energy dissipation, which concept has yet to be realized for current hyperthermia applications. We investigated the effect of spin resonance-mediated heat dissipation using superparamagnetic Fe3O4 nanoparticles and achieved an extraordinary initial temperature increment rate of more than 150 K/s, which is a significant increase in comparison to that for the conventional magnetic heat induction of nanoparticles. This work would offer highly efficient heat generation and precision wireless controllability for realization of magnetic-hyperthermia-based medical treatment.

| S-EPMC7925677 | biostudies-literature

High Rate of Asymptomatic Carriage Associated with Variant Strain Omicron.

Project description:The early widespread dissemination of Omicron indicates the urgent need to better understand the transmission dynamics of this variant, including asymptomatic spread among immunocompetent and immunosuppressed populations. In early December 2021, the Ubuntu clinical trial, designed to evaluate efficacy of the mRNA-1273 vaccine (Moderna) among persons living with HIV (PLWH), began enrolling participants. Nasal swabs are routinely obtained at the initial vaccination visit, which requires participants to be clinically well to receive their initial jab. Of the initial 230 participants enrolled between December 2 and December 17, 2021, 71 (31%) were PCR positive for SARS-CoV-2: all of whom were subsequently confirmed by S gene dropout to be Omicron; 48% of the tested samples had cycle threshold (CT) values <25 and 18% less than 20, indicative of high titers of asymptomatic shedding. Asymptomatic carriage rates were similar in SARS-CoV-2 seropositive and seronegative persons (27% respectively). These data are in stark contrast to COVID-19 vaccine studies conducted pre-Omicron, where the SARS-CoV-2 PCR positivity rate at the first vaccination visit ranged from <1%-2.4%, including a cohort of over 1,200 PLWH largely enrolled in South Africa during the Beta outbreak. We also evaluated asymptomatic carriage in a sub study of the Sisonke vaccine trial conducted in South African health care workers, which indicated 2.6% asymptomatic carriage during the Beta and Delta outbreaks and subsequently rose to 16% in both PLWH and PHLWH during the Omicron period. These findings strongly suggest that Omicron has a much higher rate of asymptomatic carriage than other VOC and this high prevalence of asymptomatic infection is likely a major factor in the widespread, rapid dissemination of the variant globally, even among populations with high prior rates of SARS-COV-2 infection.

| S-EPMC8764727 | biostudies-literature

High-bit rate ultra-compact light routing with mode-selective on-chip nanoantennas.

Project description:Optical nanoantennas provide a promising pathway toward advanced manipulation of light waves, such as directional scattering, polarization conversion, and fluorescence enhancement. Although these functionalities were mainly studied for nanoantennas in free space or on homogeneous substrates, their integration with optical waveguides offers an important "wired" connection to other functional optical components. Taking advantage of the nanoantenna's versatility and unrivaled compactness, their imprinting onto optical waveguides would enable a marked enhancement of design freedom and integration density for optical on-chip devices. Several examples of this concept have been demonstrated recently. However, the important question of whether nanoantennas can fulfill functionalities for high-bit rate signal transmission without degradation, which is the core purpose of many integrated optical applications, has not yet been experimentally investigated. We introduce and investigate directional, polarization-selective, and mode-selective on-chip nanoantennas integrated with a silicon rib waveguide. We demonstrate that these nanoantennas can separate optical signals with different polarizations by coupling the different polarizations of light vertically to different waveguide modes propagating into opposite directions. As the central result of this work, we show the suitability of this concept for the control of optical signals with ASK (amplitude-shift keying) NRZ (nonreturn to zero) modulation [10 Gigabit/s (Gb/s)] without significant bit error rate impairments. Our results demonstrate that waveguide-integrated nanoantennas have the potential to be used as ultra-compact polarization-demultiplexing on-chip devices for high-bit rate telecommunication applications.

| S-EPMC5517110 | biostudies-other

Ultra-high piezoelectric coefficients and strain-sensitive Curie temperature in hydrogen-bonded systems.

Project description:We propose a new approach to obtain ultra-high piezoelectric coefficients that can be infinitely large theoretically, where ferroelectrics with strain-sensitive Curie temperature are necessary. We show the first-principles plus Monte Carlo simulation evidence that many hydrogen-bonded ferroelectrics (e.g. organic PhMDA) can be ideal candidates, which are also flexible and lead-free. Owing to the specific features of hydrogen bonding, their proton hopping barrier will drastically increase with prolonged proton transfer distance, while their hydrogen-bonded network can be easily compressed or stretched due to softness of hydrogen bonds. Their barriers as well as the Curie temperature can be approximately doubled upon a tensile strain as low as 2%. Their Curie temperature can be tuned exactly to room temperature by fixing a strain in one direction, and in another direction, an unprecedented ultra-high piezoelectric coefficient of 2058 pC/N can be obtained. This value is even underestimated and can be greatly enhanced when applying a smaller strain. Aside from sensors, they can also be utilized for converting either mechanical or thermal energies into electrical energies due to high pyroelectric coefficients.

| S-EPMC8288374 | biostudies-literature

High-Temperature Nanoindentation of an Advanced Nano-Crystalline W/Cu Composite.

Project description:The applicability of nano-crystalline W/Cu composites is governed by their mechanical properties and microstructural stability at high temperatures. Therefore, mechanical and structural investigations of a high-pressure torsion deformed W/Cu nanocomposite were performed up to a temperature of 600 °C. Furthermore, the material was annealed at several temperatures for 1 h within a high-vacuum furnace to determine microstructural changes and surface effects. No significant increase of grain size, but distinct evaporation of the Cu phase accompanied by Cu pool and faceted Cu particle formation could be identified on the specimen's surface. Additionally, high-temperature nanoindentation and strain rate jump tests were performed to investigate the materials mechanical response at elevated temperatures. Hardness and Young's modulus decrease were noteworthy due to temperature-induced effects and slight grain growth. The strain rate sensitivity in dependent of the temperature remained constant for the investigated W/Cu composite material. Also, the activation volume of the nano-crystalline composite increased with temperature and behaved similar to coarse-grained W. The current study extends the understanding of the high-temperature behavior of nano-crystalline W/Cu composites within vacuum environments such as future fusion reactors.

| S-EPMC8618606 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data