Application of a Bayesian non-linear model hybrid scheme to sequence data for genomic prediction and QTL mapping.
Ontology highlight
ABSTRACT:
SUBMITTER: Wang T
PROVIDER: S-EPMC5558724 | biostudies-other | 2017 Aug
REPOSITORIES: biostudies-other
Similar Datasets
Project description:BACKGROUND:Genomic prediction and quantitative trait loci (QTL) mapping typically analyze one trait at a time but this may ignore the possibility that one polymorphism affects multiple traits. The aim of this study was to develop a multivariate Bayesian approach that could be used for simultaneously elucidating genetic architecture, QTL mapping, and genomic prediction. Our approach uses information from multiple traits to divide markers into 'unassociated' (no association with any trait) and 'associated' (associated with one or more traits). The effect of associated markers is estimated independently for each trait to avoid the assumption that QTL effects follow a multi-variate normal distribution. RESULTS:Using simulated data, our multivariate method (BayesMV) detected a larger number of true QTL (with a posterior probability > 0.9) and increased the accuracy of genomic prediction compared to an equivalent univariate method (BayesR). With real data, accuracies of genomic prediction in validation sets for milk yield traits with high-density genotypes were approximately equal to those from equivalent single-trait methods. BayesMV tended to select a similar number of single nucleotide polymorphisms (SNPs) per trait for genomic prediction compared to BayesR (i.e. those with non-zero effects), but BayesR selected different sets of SNPs for each trait, whereas BayesMV selected a common set of SNPs across traits. Despite these two dramatically different estimates of genetic architecture (i.e. different SNPs affecting each trait vs. pleiotropic SNPs), both models indicated that 3000 to 4000 SNPs are associated with a trait. The BayesMV approach may be advantageous when the aim is to develop a low-density SNP chip that works well for a number of traits. SNPs for milk yield traits identified by BayesMV and BayesR were also found to be associated with detailed milk composition. CONCLUSIONS:The BayesMV method simultaneously estimates the proportion of SNPs that are associated with a combination of traits. When applied to milk production traits, most of the identified SNPs were associated with all three traits (milk, fat and protein yield). BayesMV aims at exploiting pleiotropic QTL and selects a small number of SNPs that could be used to predict multiple traits.
| S-EPMC5866527 | biostudies-literature
Project description:The application of genomic selection to sheep breeding could lead to substantial increases in profitability of wool production due to the availability of accurate breeding values from single nucleotide polymorphism (SNP) data. Several key traits determine the value of wool and influence a sheep's susceptibility to fleece rot and fly strike. Our aim was to predict genomic estimated breeding values (GEBV) and to compare three methods of combining information across traits to map polymorphisms that affect these traits.GEBV for 5726 Merino and Merino crossbred sheep were calculated using BayesR and genomic best linear unbiased prediction (GBLUP) with real and imputed 510,174 SNPs for 22 traits (at yearling and adult ages) including wool production and quality, and breech conformation traits that are associated with susceptibility to fly strike. Accuracies of these GEBV were assessed using fivefold cross-validation. We also devised and compared three approximate multi-trait analyses to map pleiotropic quantitative trait loci (QTL): a multi-trait genome-wide association study and two multi-trait methods that use the output from BayesR analyses. One BayesR method used local GEBV for each trait, while the other used the posterior probabilities that a SNP had an effect on each trait.BayesR and GBLUP resulted in similar average GEBV accuracies across traits (~0.22). BayesR accuracies were highest for wool yield and fibre diameter (>0.40) and lowest for skin quality and dag score (<0.10). Generally, accuracy was higher for traits with larger reference populations and higher heritability. In total, the three multi-trait analyses identified 206 putative QTL, of which 20 were common to the three analyses. The two BayesR multi-trait approaches mapped QTL in a more defined manner than the multi-trait GWAS. We identified genes with known effects on hair growth (i.e. FGF5, STAT3, KRT86, and ALX4) near SNPs with pleiotropic effects on wool traits.The mean accuracy of genomic prediction across wool traits was around 0.22. The three multi-trait analyses identified 206 putative QTL across the ovine genome. Detailed phenotypic information helped to identify likely candidate genes.
| S-EPMC5558709 | biostudies-other
Project description:BACKGROUND:National genetic evaluations for disease resistance do not exist, precluding the genetic improvement of cattle for these traits. We imputed BovineHD genotypes to whole genome sequence for 2703 Holsteins that were cases or controls for Bovine Respiratory Disease and sampled from either California or New Mexico to construct and compare genomic prediction models. The sequence variation reference dataset comprised variants called for 1578 animals from Run 5 of the 1000 Bull Genomes Project, including 450 Holsteins and 29 animals sequenced from this study population. Genotypes for 9,282,726 variants with minor allele frequencies ?5% were imputed and used to obtain genomic predictions in GEMMA using a Bayesian Sparse Linear Mixed Model. RESULTS:Variation explained by markers increased from 13.6% using BovineHD data to 14.4% using imputed whole genome sequence data and the resolution of genomic regions detected as harbouring QTL substantially increased. Explained variation in the analysis of the combined California and New Mexico data was less than when data for each state were separately analysed and the estimated genetic correlation between risk of Bovine Respiratory Disease in California and New Mexico Holsteins was -?0.36. Consequently, genomic predictions trained using the data from one state did not accurately predict disease risk in the other state. To determine if a prediction model could be developed with utility in both states, we selected variants within genomic regions harbouring: 1) genes involved in the normal immune response to infection by pathogens responsible for Bovine Respiratory Disease detected by RNA-Seq analysis, and/or 2) QTL identified in the association analysis of the imputed sequence variants. The model based on QTL selected variants is biased but when trained in one state generated BRD risk predictions with positive accuracies in the other state. CONCLUSIONS:We demonstrate the utility of sequence-based and biology-driven model development for genomic selection. Disease phenotypes cannot be routinely recorded in most livestock species and the observed phenotypes may vary in their genomic architecture due to variation in the pathogen composition across environments. Elucidation of trait biology and genetic architecture may guide the development of prediction models with utility across breeds and environments.
| S-EPMC6612181 | biostudies-literature
Project description:Genomic selection is an upgrading form of marker-assisted selection for quantitative traits, and it differs from the traditional marker-assisted selection in that markers in the entire genome are used to predict genetic values and the QTL detection step is skipped. Genomic selection holds the promise to be more efficient than the traditional marker-assisted selection for traits controlled by polygenes. Genomic selection for pure breed improvement is based on marker information and thus leads to cost-saving due to early selection before phenotypes are measured. When applied to hybrid breeding, genomic selection is anticipated to be even more efficient because genotypes of hybrids are predetermined by their inbred parents. Hybrid breeding has been an important tool to increase crop productivity. Here we proposed and applied an advanced method to predict hybrid performance, in which a subset of all potential hybrids is used as a training sample to predict trait values of all potential hybrids. The method is called genomic best linear unbiased prediction. The technology applied to hybrids is called genomic hybrid breeding. We used 278 randomly selected hybrids derived from 210 recombinant inbred lines of rice as a training sample and predicted all 21,945 potential hybrids. The average yield of top 100 selection shows a 16% increase compared with the average yield of all potential hybrids. The new strategy of marker-guided prediction of hybrid yields serves as a proof of concept for a new technology that may potentially revolutionize hybrid breeding.
| S-EPMC4151732 | biostudies-literature
Project description:BackgroundWhole-genome sequence (WGS) data are increasingly available on large numbers of individuals in animal and plant breeding and in human genetics through second-generation resequencing technologies, 1000 genomes projects, and large-scale genotype imputation from lower marker densities. Here, we present a computationally fast implementation of a variable selection genomic prediction method, that could handle WGS data on more than 35,000 individuals, test its accuracy for across-breed predictions and assess its quantitative trait locus (QTL) mapping precision.MethodsThe Monte Carlo Markov chain (MCMC) variable selection model (Bayes GC) fits simultaneously a genomic best linear unbiased prediction (GBLUP) term, i.e. a polygenic effect whose correlations are described by a genomic relationship matrix (G), and a Bayes C term, i.e. a set of single nucleotide polymorphisms (SNPs) with large effects selected by the model. Computational speed is improved by a Metropolis-Hastings sampling that directs computations to the SNPs, which are, a priori, most likely to be included into the model. Speed is also improved by running many relatively short MCMC chains. Memory requirements are reduced by storing the genotype matrix in binary form. The model was tested on a WGS dataset containing Holstein, Jersey and Australian Red cattle. The data contained 4,809,520 genotypes on 35,549 individuals together with their milk, fat and protein yields, and fat and protein percentage traits.ResultsThe prediction accuracies of the Jersey individuals improved by 1.5% when using across-breed GBLUP compared to within-breed predictions. Using WGS instead of 600 k SNP-chip data yielded on average a 3% accuracy improvement for Australian Red cows. QTL were fine-mapped by locating the SNP with the highest posterior probability of being included in the model. Various QTL known from the literature were rediscovered, and a new SNP affecting milk production was discovered on chromosome 20 at 34.501126 Mb. Due to the high mapping precision, it was clear that many of the discovered QTL were the same across the five dairy traits.ConclusionsAcross-breed Bayes GC genomic prediction improved prediction accuracies compared to GBLUP. The combination of across-breed WGS data and Bayesian genomic prediction proved remarkably effective for the fine-mapping of QTL.
| S-EPMC7908738 | biostudies-literature
Project description:Background:The selection of hybrids is an essential step in maize breeding. However, evaluating a large number of hybrids in field trials can be extremely costly. However, genomic models can be used to predict the expected performance of un-tested genotypes. Bayesian models offer a very flexible framework for hybrid prediction. The Bayesian methodology can be used with parametric and semi-parametric assumptions for additive and non-additive effects. Furthermore, samples from the posterior distribution of Bayesian models can be used to estimate the variance due to general and specific combining abilities even in cases where additive and non-additive effects are not mutually orthogonal. Also, the use of Bayesian models for analysis and prediction of hybrid performance has remained fairly limited. Results:We provided an overview of Bayesian parametric and semi-parametric genomic models for prediction of agronomic traits in maize hybrids and discussed how these models can be used to decompose the genotypic variance into components due to general and specific combining ability. We applied the methodology to data from 906 single cross tropical maize hybrids derived from a convergent population. Our results show that: (1) non-additive effects make a sizable contribution to the genetic variance of grain yield; however, the relative importance of non-additive effects was much smaller for ear and plant height; (2) genomic prediction can achieve relatively high accuracy in predicting phenotypes of un-tested hybrids and in pre-screening. Conclusions:Genomic prediction can be a useful tool in pre-screening of hybrids and could contribute to the improvement of the efficiency and efficacy of maize hybrids breeding programs. The Bayesian framework offers a great deal of flexibility in modeling hybrid performance. The methodology can be used to estimate important genetic parameters and render predictions of the expected hybrid performance as well measures of uncertainty about such predictions.
| S-EPMC6366084 | biostudies-other
Project description:Root system architecture (RSA) is a crucial factor in resource acquisition and plant productivity. Roots are difficult to phenotype in the field, thus new tools for predicting phenotype from genotype are particularly valuable for plant breeders aiming to improve RSA. This study identifies quantitative trait loci (QTLs) for RSA and agronomic traits in a rice (Oryza sativa) recombinant inbred line (RIL) population derived from parents with contrasting RSA traits (PI312777 × Katy). The lines were phenotyped for agronomic traits in the field, and separately grown as seedlings on agar plates which were imaged to extract RSA trait measurements. QTLs were discovered from conventional linkage analysis and from a machine learning approach using a Bayesian network (BN) consisting of genome-wide SNP data and phenotypic data. The genomic prediction abilities (GPAs) of multi-QTL models and the BN analysis were compared with the several standard genomic prediction (GP) methods. We found GPAs were improved using multitrait (BN) compared to single trait GP in traits with low to moderate heritability. Two groups of individuals were selected based on GPs and a modified rank sum index (GSRI) indicating their divergence across multiple RSA traits. Selections made on GPs did result in differences between the group means for numerous RSA. The ranking accuracy across RSA traits among the individual selected RILs ranged from 0.14 for root volume to 0.59 for lateral root tips. We conclude that the multitrait GP model using BN can in some cases improve the GPA of RSA and agronomic traits, and the GSRI approach is useful to simultaneously select for a desired set of RSA traits in a segregating population.
| S-EPMC8496310 | biostudies-literature
Project description:Dense SNP genotypes are often combined with complex trait phenotypes to map causal variants, study genetic architecture and provide genomic predictions for individuals with genotypes but no phenotype. A single method of analysis that jointly fits all genotypes in a Bayesian mixture model (BayesR) has been shown to competitively address all 3 purposes simultaneously. However, BayesR and other similar methods ignore prior biological knowledge and assume all genotypes are equally likely to affect the trait. While this assumption is reasonable for SNP array genotypes, it is less sensible if genotypes are whole-genome sequence variants which should include causal variants.We introduce a new method (BayesRC) based on BayesR that incorporates prior biological information in the analysis by defining classes of variants likely to be enriched for causal mutations. The information can be derived from a range of sources, including variant annotation, candidate gene lists and known causal variants. This information is then incorporated objectively in the analysis based on evidence of enrichment in the data. We demonstrate the increased power of BayesRC compared to BayesR using real dairy cattle genotypes with simulated phenotypes. The genotypes were imputed whole-genome sequence variants in coding regions combined with dense SNP markers. BayesRC increased the power to detect causal variants and increased the accuracy of genomic prediction. The relative improvement for genomic prediction was most apparent in validation populations that were not closely related to the reference population. We also applied BayesRC to real milk production phenotypes in dairy cattle using independent biological priors from gene expression analyses. Although current biological knowledge of which genes and variants affect milk production is still very incomplete, our results suggest that the new BayesRC method was equal to or more powerful than BayesR for detecting candidate causal variants and for genomic prediction of milk traits.BayesRC provides a novel and flexible approach to simultaneously improving the accuracy of QTL discovery and genomic prediction by taking advantage of prior biological knowledge. Approaches such as BayesRC will become increasing useful as biological knowledge accumulates regarding functional regions of the genome for a range of traits and species.
| S-EPMC4769584 | biostudies-literature
Project description:In this article, we propose a model selection method, the Bayesian composite model space approach, to map quantitative trait loci (QTL) in a half-sib population for continuous and binary traits. In our method, the identity-by-descent-based variance component model is used. To demonstrate the performance of this model, the method was applied to map QTL underlying production traits on BTA6 in a Chinese half-sib dairy cattle population. A total of four QTLs were detected, whereas only one QTL was identified using the traditional least square (LS) method. We also conducted two simulation experiments to validate the efficiency of our method. The results suggest that the proposed method based on a multiple-QTL model is efficient in mapping multiple QTL for an outbred half-sib population and is more powerful than the LS method based on a single-QTL model.
| S-EPMC3183946 | biostudies-literature
Project description:Genetic studies increasingly rely on high-throughput phenotyping, but the resulting longitudinal data pose analytical challenges. We used canopy height data from an automated field phenotyping platform to compare several approaches to scanning for quantitative trait loci (QTLs) and performing genomic prediction in a wheat recombinant inbred line mapping population based on up to 26 sampled time points (TPs). We detected four persistent QTLs (i.e. expressed for most of the growing season), with both empirical and simulation analyses demonstrating superior statistical power of detecting such QTLs through functional mapping approaches compared with conventional individual TP analyses. In contrast, even very simple individual TP approaches (e.g. interval mapping) had superior detection power for transient QTLs (i.e. expressed during very short periods). Using spline-smoothed phenotypic data resulted in improved genomic predictive abilities (5-8% higher than individual TP prediction), while the effect of including significant QTLs in prediction models was relatively minor (<1-4% improvement). Finally, although QTL detection power and predictive ability generally increased with the number of TPs analysed, gains beyond five or 10 TPs chosen based on phenological information had little practical significance. These results will inform the development of an integrated, semi-automated analytical pipeline, which will be more broadly applicable to similar data sets in wheat and other crops.
| S-EPMC7094083 | biostudies-literature