Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Data on cadmium removal from synthetic aqueous solution using garbage ash.

ABSTRACT: This data article investigates cadmium removal efficiency using garbage ash as a cheap and effective adsorbent. Influence of different parameters, such as initial cadmium (II) concentration (mg/L), contact time (min), adsorbent dose (gr/L), pH and temperature (°C) were investigated. The characterization data of the garbage ash was determined using SEM analysis. The experimental data indicated that the adsorption of cadmium on garbage ash follows pseudo second order model and Langmuir isotherm model with R2 =?0.99. Also, the maximum adsorption capacity of adsorbent was 100.25?mg/g. Thermodynamic data showed that cadmium adsorption on garbage ash was a spontaneous and endothermic process. Based on acquired data, garbage ash could be proposed as an efficient and low-cost adsorbent for the removal of cadmium from aqueous solution.

SUBMITTER: Qasemi M

PROVIDER: S-EPMC6139894 | biostudies-other | 2018 Oct

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Publications

Data on cadmium removal from synthetic aqueous solution using garbage ash.

Qasemi Mehdi M Zarei Ahmad A Afsharnia Mojtaba M Salehi Rezvan R Allahdadi Mohadeseh M Farhang Mansoureh M

Data in brief 20180901

This data article investigates cadmium removal efficiency using garbage ash as a cheap and effective adsorbent. Influence of different parameters, such as initial cadmium (II) concentration (mg/L), contact time (min), adsorbent dose (gr/L), pH and temperature (°C) were investigated. The characterization data of the garbage ash was determined using SEM analysis. The experimental data indicated that the adsorption of cadmium on garbage ash follows pseudo second order model and Langmuir isotherm mo ...[more]

PMID: 30229127

Similar Datasets

Phenol removal from aqueous solution using Citrullus colocynthis waste ash.

Project description:Phenol is a hazardous organic chemical that introduced into the environment by industrial and pharmaceutical discharges. As a versatile option for phenol removal, adsorption would be viable if it accompanying with low cost adsorbents. This article described a natural, very cheap and local available adsorbent for phenol removal. Phenol showed a high affinity to Citrullus colocynthis waste ash which mainly composed of SiO2 (41.6%), Al2O3 (17.3%) and MgO (15.9%). Up to 70% of phenol adsorbed in the first 30 min of agitation. The phenol removal was increased by increasing adsorbent dose (0.5-10 g/L) and decreasing pH (2-12) and pollutant concentration (10-100 mg/L). The positive value of ∆H° in thermodynamic data (0.06) revealed that the process is endothermic. The high and positive value of ∆S° (13.01) and negative values of ∆G° (- 5.36 to - 7.28), showed a high affinity of phenol to the adsorbent and the spontaneous nature of the adsorption. Isotherm modelling revealed that the phenol molecules adsorbed in multilayer with the maximum adsorption capacity of 173.2 mg/g. The rate limiting step in the sorption process was chemisorption, based on the kinetic data.

| S-EPMC5996314 | biostudies-literature

Kinetic study of removal heavy metal from aqueous solution using the synthetic aluminum silicate.

Project description:One of the problems that most affect humanity today is the wastewater discharge into different water bodies. It was estimated that more than 7 million tons of wastewater are generated worldwide and are discharged into rivers, lakes, and reservoirs. Among the most dangerous wastewaters are those from inorganic chemistry research laboratories, mainly due to heavy metals. These problems have become a highly relevant topic, and numerous researchers have tried to design wastewater treatment systems that will deal more efficiently with heavy metals elimination. In this work, the synthesis, characterization, and evaluation of hydrated aluminium silicate were performed as alternative wastewater treatment from chemistry research and teaching laboratories. The compound obtained was [Formula: see text], which was characterized by the determination of its physicochemical properties. These revealed a low density, very porous material, with low crystallinity, strong chemical resistance, a large surface area, and a high apparent ionic exchange capacity. Absorption kinetics studies of heavy metals in aqueous solutions, through more widespread models, have demonstrated that [Formula: see text] has excellent properties as absorbents of this material. The amorphous hydrated aluminium silicate achieves a decrease in the concentration of all the metal ions studied, reducing them to discharge levels permissible.

| S-EPMC7331683 | biostudies-literature

Removal of doxycycline hydrochloride from aqueous solution by rice husk ash using response surface methodology and disposability study.

Project description:The huge demand and consumption of DOX, its incomplete metabolism, and complex behavior in atmosphere are causing a great ecological issue, which needs to be solved. In the present study, the suitability of rice husk ash (RHA) for the greater sorption efficiency of DOX antibiotic was investigated. Furthermore, disposability study of exhausted RHA was performed using solidification technique and leachate had undergone toxicity test to evaluate the DOX encapsulation ability. The central composite design under RSM was employed for the design of experiment and optimization of adsorption parameters. RHA was characterized using various techniques such as XRD, SEM (EDX), FTIR, BET, and zeta potential analysis. The influence of various adsorption parameters, like initial DOX concentration (C0), RHA dosage (m), incubation-time period (t), and pH were examined on the performance in terms of DOX elimination % (X1) and adsorptive capacity (mg/g) (X2). At optimized conditions, the obtained X1 and X2 were 98.85% and 17.74 mg/g, respectively. Moreover, the kinetics data suited well to the pseudo-second-order model. Freundlich, Langmuir, and Redlich-Peterson (R-P) isotherm models were applied, out of which Langmuir model best performed under optimized conditions; m = 5 g/L, t = 85.85 min, DOX concentration = 89.73 mg/L, and pH = 6. The bacterial toxicity test of leachate confirmed complete encapsulation of DOX by solidification technique.

| S-EPMC8853133 | biostudies-literature

Statistical optimization for cadmium removal using Ulva fasciata biomass: Characterization, immobilization and application for almost-complete cadmium removal from aqueous solutions.

Project description:Cadmium is a global heavy metal pollutant. Marine green algae were used as efficient, low cost and eco-friendly biosorbent for cadmium ions removal from aqueous solutions. Plackett-Burman design was applied to determine the most significant factors for maximum cadmium removal from aqueous solutions using dry Ulva fasciata biomass. The most significant factors affecting cadmium removal process were further optimized by the face centered central composite design. The results indicated that 4 g of dry Ulva fasciata biomass was found to successfully remove 99.96% of cadmium from aqueous solution under the conditions of 200 mg/L of initial cadmium concentration at pH 5, 25 °C for 60 min of contact time with static condition. Dry Ulva fasciata biomass samples before and after cadmium biosorption were analyzed using SEM, EDS and FTIR. Furthermore, the immobilized biomass in sodium alginate-beads removed 99.98% of cadmium from aqueous solution at an initial concentration of 200 mg/L after 4 h which is significantly higher than that for control using sodium alginate beads without incorporation of the algal biomass (98.19%). Dry biomass of Ulva fasciata was proven to be cost-effective and efficient to eliminate heavy metals especially cadmium from aquatic effluents and the process is feasible, reliable and eco-friendly.

| S-EPMC6102212 | biostudies-literature

Removal of Heavy Metal Ions from Aqueous Solution Using Biotransformed Lignite.

Project description:Heavy metal pollution caused by industrial wastewater such as mining and metallurgical wastewater is a major global concern. Therefore, this study used modified lignite as a low-cost adsorbent for heavy metal ions. Pingzhuang lignite was dissolved and modified using Fusarium lignite B3 to prepare a biotransformed-lignite adsorbent (BLA). The O, H, and N contents of the BLA increased after transformation, and the specific surface area increased from 1.81 to 5.66 m2·g-1. Various adsorption properties were investigated using an aqueous solution of Cu(Ⅱ). The kinetic and isothermal data were well-fitted by pseudo-second-order and Langmuir models, respectively. The Langmuir model showed that the theoretical Cu(II) adsorption capacity was 71.47 mg·g-1. Moreover, large particles and a neutral pH were favorable for the adsorption of heavy metal ions. The adsorption capacities of raw lignite and BLA were compared for various ions. Microbial transformation greatly improved the adsorption capacity, and the BLA had good adsorption and passivation effects with Cu(II), Mn(II), Cd(II), and Hg(II). Investigation of the structural properties showed that the porosity and specific surface area increased after biotransformation, and there were more active groups such as -COOH, Ar-OH, and R-OH, which were involved in the adsorption performance.

| S-EPMC10343599 | biostudies-literature

Eco-Friendly Materials Obtained by Fly Ash Sulphuric Activation for Cadmium Ions Removal.

Project description:Wastes are the sustainable sources of raw materials for the synthesis of new adsorbent materials. This study has as objectives the advanced capitalization of fly ash, by sulphuric acid activation methods, and testing of synthesized materials for heavy metals removal. Based on the previous studies, the synthesis parameters were 1/3 s/L ratio, 80 °C temperature and 10% diluted sulphuric acid, which permitted the synthesis of an eco-friendly adsorbent. The prepared adsorbent was characterized through SEM, EDX, FTIR, XRD and BET methods. Adsorption studies were carried out for the removal of Cd2+ ions, recognized as ions dangerous for the environment. The effects of adsorbent dose, contact time and metal ion concentrations were studied. The data were tested in terms of Langmuir and Freundlich isotherm and it was found that the Langmuir isotherm fitted the adsorption with a maximum adsorption capacity of 28.09 mg/g. Kinetic data were evaluated with the pseudo-first-order model, the pseudo-second-order model and the intraparticle diffusion model. The kinetics of cadmium adsorption into eco-friendly material was described with the pseudo-second-order model, which indicated the chemisorption mechanism.

| S-EPMC7476049 | biostudies-literature

Enhanced removal of As (V) from aqueous solution using modified hydrous ferric oxide nanoparticles.

Project description:Hydrous ferric oxide (HFO) is most effective with high treatment capacity on arsenate [As(V)] sorption although its transformation and aggregation nature need further improvement. Here, HFO nanoparticles with carboxymethyl cellulose (CMC) or starch as modifier was synthesized for the purpose of stability improvement and As(V) removal from water. Comparatively, CMC might be the optimum stabilizer for HFO nanoparticles because of more effective physical and chemical stability. The large-pore structure, high surface specific area, and the non-aggregated nature of CMC-HFO lead to increased adsorption sites, and thus high adsorption capacities of As(V) without pre-treatment (355 mg·g-1), which is much greater than those reported in previous studies. Second-order equation and dual-mode isotherm model could be successfully used to interpret the sorption kinetics and isotherms of As(V), respectively. FTIR, XPS and XRD analyses suggested that precipitation and surface complexation were primary mechanisms for As(V) removal by CMC modified HFO nanoparticles. A surface complexation model (SCM) was used to simulate As adsorption over pH 2.5-10.4. The predominant adsorbed arsenate species were modeled as bidentate binuclear surface complexes at low pH and as monodentate complexes at high pH. The immobilized arsenic remained stable when aging for 270 d at room temperature.

| S-EPMC5241682 | biostudies-literature

Removal of Arsenic(III) from Aqueous Solution Using Metal Organic Framework-Graphene Oxide Nanocomposite.

Project description:MIL-53(Al)-graphene oxide (GO) nanocomposites of different GO to MIL-53(Al) mass ratios (1% to 25% GO) were synthesized and tested for removal of arsenite (As(III)), which is a well-known groundwater contaminant. The properties of MIL-53(Al)-GO nanocomposites were characterized using X-ray Diffraction (XRD), Fourier Transform Infrared (FT-IR) Spectroscopy, Brunauer-Emmett-Teller (BET) surface area measurements, and Scanning Electron Microscopy (SEM). Batch experiments were performed on MIL-53(Al)-GO nanocomposites for As(III) adsorption in aqueous solutions to investigate adsorption kinetics and isotherm behavior under varying environmental conditions. The effects of solution pH (2 to 11), initial As(III) concentrations (10⁻110 mg/L), adsorbent dosage (0.2⁻3.0 g/L), and temperature (298⁻318 K) on As(III) adsorption were investigated. MIL-53(Al)-GO nanocomposites showed higher adsorption of As(III) than pristine MIL-53(Al) and GO individually. As (III) removal was optimized at a ratio of 3% GO in the MIL-53(Al)-GO nanocomposite, with an adsorption capacity of 65 mg/g. The adsorption kinetics and isotherms followed pseudo-second-order and Langmuir isotherm models, respectively. Overall, these results suggest that MIL-53(Al)-GO nanocomposite holds a significant promise for use in the remediation of As (III) from groundwater and other aqueous solutions.

| S-EPMC6315412 | biostudies-literature

Simultaneous Removal of Arsenic and Manganese from Synthetic Aqueous Solutions Using Polymer Gel Composites.

Project description:The groundwater in approximately 50% of the Bangladesh landmass contains Mn concentrations greater than the limit prescribed by the WHO drinking water guidelines. Although studies have suggested that γ-FeOOH can effectively remove Mn from water, its practicability has not been investigated, considering that the additional processes required to separate the adsorbents and precipitates are not environment-friendly. To improve the efficiency of adsorptive Mn-removal under natural conditions, we employed a cationic polymer gel composite, N,N'-Dimethylaminopropyl acrylamide, methyl chloride quaternary (DMAPAAQ) loaded with iron hydroxide (DMAPAAQ + FeOOH), and a non-ionic polymer gel composite, N,N'-Dimethylacrylamide (DMAA) loaded with iron hydroxide (DMAA + FeOOH). DMAPAAQ + FeOOH exhibited a higher As removal efficiency under natural conditions while being environment-friendly. Our results suggest that the higher efficiency of the cationic gel composite is owed to the higher γ-FeOOH content in its gel structure. The maximum adsorption of Mn by DMAPAAQ + FeOOH was 39.02 mg/g. Furthermore, the presence of As did not influence the adsorption of Mn on the DMAPAAQ + FeOOH gel composite and vice versa. DMAPAAQ adsorbed As and the γ-FeOOH particles simultaneously adsorbed Mn. Our findings can serve as a basis for the simultaneous removal of contaminants such as As, Mn, Cr, and Cd.

| S-EPMC8073374 | biostudies-literature

Data on the removal of heavy metals from aqueous solution by adsorption using melanin nanopigment obtained from marine source: Pseudomonas stutzeri.

Project description:Heavy metals are one of deadly contaminants in ground water across the globe. Thus, herein, this data set comprises experimental and modelled data on the removal of heavy metals from ground water using melanin synthesized by the marine bacteria Pseudomonas stutzeri. Characterization of biosynthesized melanin and modelling of the kinetic and the thermodynamic study on adsorption of heavy metals such as mercury (Hg(II)), lead (Pb(II)), chromium (Cr(VI)), and copper (Cu(II)) are included in this article. Apart from the study of parameters involved in adsorption such as pH, temperature, concentration and time; the data from these studies are modelled to analyze the nature and characteristic of heavy metals adsorbing to melanin nanoparticles. The figures from models, results from models as tables, characterization and analytical figures are depicted in this work.

| S-EPMC6092452 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data