Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Fabrication of an Optical Waveguide-Mode-Field Compressor in Glass Using a Femtosecond Laser.

ABSTRACT: We report on fabrication of an optical waveguide-mode-field compressor in glass using a femtosecond laser. Our approach is based on building up a stress field within the waveguiding area which is realized by sandwiching the waveguide between a pair of laser-induced-modification-tracks. To induce an adiabatic conversion of the optical mode in the waveguide, the tracks are intentionally designed to be tapered along the waveguide. We show that our technique can allow for reducing the mode field size in a single mode waveguide from more than 10 ?m to around 7 ?m.

SUBMITTER: Liu Z

PROVIDER: S-EPMC6212878 | biostudies-other | 2018 Oct

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Publications

Fabrication of an Optical Waveguide-Mode-Field Compressor in Glass Using a Femtosecond Laser.

Liu Zhengming Z Liao Yang Y Wang Zhenhua Z Zhang Zhihao Z Liu Zhaoxiang Z Qiao Lingling L Cheng Ya Y

Materials (Basel, Switzerland) 20181010 10

We report on fabrication of an optical waveguide-mode-field compressor in glass using a femtosecond laser. Our approach is based on building up a stress field within the waveguiding area which is realized by sandwiching the waveguide between a pair of laser-induced-modification-tracks. To induce an adiabatic conversion of the optical mode in the waveguide, the tracks are intentionally designed to be tapered along the waveguide. We show that our technique can allow for reducing the mode field siz ...[more]

PMID: 30308989

Similar Datasets

Femtosecond laser directed fabrication of optical diffusers.

Project description:Optical diffusers are widely used in filament lamps, imaging systems, display technologies, lasers, and Light Emitting Diodes (LEDs). Here, a method for the fabrication of optical diffusers through femtosecond laser machining is demonstrated. Float glass surfaces were ablated with femtosecond laser light to form nanoscale ripples with dimensions comparable to the wavelength of visible light. These structures produce highly efficient and wide field of view diffusers. The machined patterns altered the average surface roughness, with the majority of particles in the range of a few hundred nanometers. The optical diffusion characteristic and a maximum diffusion angle of near 172° was achieved with optimum machining parameters. The transmission performance of the diffusers was measured to be ∼30% across the visible spectrum. The demonstrated technique has potential for producing low-cost large area optical devices. The process benefits from the flexibility of the laser writing method and enables the production of custom optical diffusers.

| S-EPMC6112377 | biostudies-literature

Femtosecond laser fabrication of silver nanostructures on glass for surface enhanced Raman spectroscopy.

Project description:We report on an optimized fabrication protocol for obtaining silver nanoparticles on fused silica substrates via laser photoreduction of a silver salt solution. We find that multiple scans of the laser over the surface leads to a more uniform coverage of densely packed silver nanoparticles of approximately 50 nm diameter on the fused silica surface. Our substrates yield Raman enhancement factors of the order of 1011 of the signal detected from crystal violet. We use a theoretical model based on scanning electron microscope (SEM) images of our substrates to explain our experimental results. We also demonstrate how our technique can be extended to embedding silver nanoparticles in buried microfluidic channels in glass. The in situ laser inscription of silver nanoparticles on a laser machined, sub-surface, microfluidic channel wall within bulk glass paves the way for developing 3D, monolithic, fused silica surface enhance Raman spectroscopy (SERS) microfluidic sensing devices.

| S-EPMC6864074 | biostudies-literature

Optical and structural characterization of femtosecond laser written micro-structures in germanate glass.

Project description:We report on direct femtosecond laser writing in zinc barium gallo-germanate glasses. A combination of spectroscopic techniques allows to progress in the understanding of the mechanisms taking place depending on the energy. In the first regime (type I, isotropic local index change) up to 0.5 µJ, the main occurrence is the generation of charge traps inspected by luminescence, together with separation of charges detected by polarized second harmonic generation measurements. At higher pulse energies notably at the threshold corresponding to 0.8 µJ or in the second regime (type II modifications corresponding to nanograting formation energy domain), the main occurrence is a chemical change and re-organization of the network evidenced by the appearance of molecular O2 seen in the Raman spectra. In addition, the polarization dependence of the second harmonic generation in type II indicates that the organization of nanogratings may be perturbed by the laser-imprinted electric field.

| S-EPMC10329654 | biostudies-literature

Custom fabrication and mode-locked operation of a femtosecond fiber laser for multiphoton microscopy.

Project description:Solid-state femtosecond lasers have stimulated the broad adoption of multiphoton microscopy in the modern laboratory. However, these devices remain costly. Fiber lasers offer promise as a means to inexpensively produce ultrashort pulses of light suitable for nonlinear microscopy in compact, robust and portable devices. Although encouraging, the initial methods reported in the biomedical engineering community to construct home-built femtosecond fiber laser systems overlooked fundamental aspects that compromised performance and misrepresented the significant financial and intellectual investments required to build these devices. Here, we present a practical protocol to fabricate an all-normal-dispersion ytterbium (Yb)-doped femtosecond fiber laser oscillator using commercially-available parts (plus standard optical components and extra-cavity accessories) as well as basic fiber splicing and laser pulse characterization equipment. We also provide a synthesis of established protocols in the laser physics community, but often overlooked in other fields, to verify true versus seemingly (partial or noise-like) mode-locked performance. The approaches described here make custom fabrication of femtosecond fiber lasers more accessible to a wide range of investigators and better represent the investments required for the proper laser design, fabrication and operation.

| S-EPMC6414530 | biostudies-literature

Silicon coupled-resonator optical-waveguide-based biosensors using light-scattering pattern recognition with pixelized mode-field-intensity distributions.

Project description:Chip-scale, optical microcavity-based biosensors typically employ an ultra-high-quality microcavity and require a precision wavelength-tunable laser for exciting the cavity resonance. For point-of-care applications, however, such a system based on measurements in the spectral domain is prone to equipment noise and not portable. An alternative microcavity-based biosensor that enables a high sensitivity in an equipment-noise-tolerant and potentially portable system is desirable. Here, we demonstrate the proof-of-concept of such a biosensor using a coupled-resonator optical-waveguide (CROW) on a silicon-on-insulator chip. The sensing scheme is based on measurements in the spatial domain, and only requires exciting the CROW at a fixed wavelength and imaging the out-of-plane elastic light-scattering intensity patterns of the CROW. Based on correlating the light-scattering intensity pattern at a probe wavelength with the light-scattering intensity patterns at the CROW eigenstates, we devise a pattern-recognition algorithm that enables the extraction of a refractive index change, Δn, applied upon the CROW upper-cladding from a calibrated set of correlation coefficients. Our experiments using an 8-microring CROW covered by NaCl solutions of different concentrations reveal a Δn of ~1.5 × 10(-4) refractive index unit (RIU) and a sensitivity of ~752 RIU(-1), with a noise-equivalent detection limit of ~6 × 10(-6) RIU.

| S-EPMC4269880 | biostudies-literature

Three-dimensional optic nerve head images using optical coherence tomography with a broad bandwidth, femtosecond, and mode-locked laser.

Project description:PurposeThe aim of this study was to demonstrate the fine laminar structure of the optic nerve head (ONH), in vivo, using a broad wavelength, ultra-high resolution, and optically coherent tomography (OCT) system.MethodsThis high-resolution OCT system, based on a 200 nm bandwidth spectrometer and an 8 femtosecond ultra-short, mode-locked, coherent laser light source, enabled in vivo cross-sectional ONH imaging with 2.0 μm axial resolution. A total of 300 optic disc B-scans, which consisted of 300 × 2048 pixels, were obtained in 10 μm steps. Three-dimensional images were rendered from these images to obtain n face images of the optic disc. Fundus photography, scanning laser ophthalmoscopy (SLO), and standard OCT were also performed for all subjects.ResultsThirty-six eyes of normal subjects and ten eyes of glaucoma patients with mean age of 40.0 ± 10.0 years were enrolled in this study. Sequential en face images, from the ONH surface to deeper layers, were reconstructed in 2.0 μm steps. Observation of the images indicated variations in the shape and arrangement of the lamina pores at different depths. Clear lamina pores were identified by this technique in 44 eyes, compared with the fundus camera (identified in six eyes), SLO (identified in 14 eyes), and standard OCT (identified in 24 eyes) (all comparisons, p < 0.001).ConclusionsThe fine structure of the ONH could be resolved in vivo using our OCT, providing improved imaging that can be used in research and clinical applications for a better characterization of the anatomical and pathological features associated with glaucoma.

| S-EPMC4312390 | biostudies-literature

True Tapping Mode Scanning Near-Field Optical Microscopy with Bent Glass Fiber Probes.

Project description:In scanning near-field optical microscopy, the most popular probes are made of sharpened glass fiber attached to a quartz tuning fork (TF) and exploiting the shear force-based feedback. The use of tapping mode feedback could be preferable. Such an approach can be realized, for example, using bent fiber probes. Detailed analysis of fiber vibration modes shows that realization of truly tapping mode of the probe dithering requires an extreme caution. In case of using the second resonance mode, probes vibrate mostly in shear force mode unless the bending radius is rather small (ca. 0.3?mm) and the probe's tip is short. Otherwise, the shear force character of the dithering persists. Probes having these characteristics were prepared by irradiation of a tapered etched glass fiber with a CW CO2 laser. These probes were attached to the TF in double resonance conditions which enables achieving significant quality factor (4000-6000) of the TF + probe system (Cherkun et al., 2006). We also show that, to achieve a truly tapping character, dithering, short, and not exceeding 3?mm lengths of a freestanding part of bent fiber probe beam should also be used in the case of nonresonant excitation.

| S-EPMC5937387 | biostudies-literature

Femtosecond laser induced thermophoretic writing of waveguides in silicate glass.

Project description:Here in, the fs-laser induced thermophoretic writing of microstructures in ad-hoc compositionally designed silicate glasses and their application as infrared optical waveguides is reported. The glass modification mechanism mimics the elemental thermal diffusion occurring in basaltic liquids at the Earth's mantle, but in a much shorter time scale (108 times faster) and over a well-defined micrometric volume. The precise addition of BaO, Na2O and K2O to the silicate glass enables the creation of positive refractive index contrast upon fs-laser irradiation. The influence of the focal volume and the induced temperature gradient is thoroughly analyzed, leading to a variety of structures with refractive index contrasts as high as 2.5 × 10-2. Two independent methods, namely near field measurements and electronic polarizability analysis, confirm the magnitude of the refractive index on the modified regions. Additionally, the functionality of the microstructures as waveguides is further optimized by lowering their propagation losses, enabling their implementation in a wide range of photonic devices.

| S-EPMC8052338 | biostudies-literature

Femtosecond laser processing by using patterned vector optical fields.

Project description:We present and demonstrate an approach for femtosecond laser processing by using patterned vector optical fields (PVOFs) composed of multiple individual vector optical fields. The PVOFs can be flexibly engineered due to the diversity of individual vector optical fields in spatial arrangement and distribution of states of polarization, and it is easily created with the aid of a spatial light modulator. The focused PVOFs will certainly result in various interference patterns, which are then used to fabricate multi-microholes with various patterns on silicon. The present approach can be expanded to fabricate three-dimensional microstructures based on two-photon polymerization.

| S-EPMC3722566 | biostudies-other

Fabrication of high-Q lithium niobate microresonators using femtosecond laser micromachining.

Project description:We report on fabrication of high-Q lithium niobate (LN) whispering-gallery-mode (WGM) microresonators suspended on silica pedestals by femtosecond laser direct writing followed by focused ion beam (FIB) milling. The micrometer-scale (diameter ~82 μm) LN resonator possesses a Q factor of ~2.5 × 10(5) around 1550 nm wavelength. The combination of femtosecond laser direct writing with FIB enables high-efficiency, high-precision nanofabrication of high-Q crystalline microresonators.

| S-EPMC4308694 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data