GNPS - Brittonodoxa subpinnata non-polar extract
Ontology highlight
ABSTRACT:
INSTRUMENT(S): GC-MS (Agilent 6850 Network GC System /Agilent 5975C VL MSD)
ORGANISM(S): Brittonodoxa Subpinnata
SUBMITTER: 
Wilton Ricardo Sala-Carvalho
PROVIDER: MSV000093496 | GNPS | Sat Nov 25 12:47:00 GMT 2023
REPOSITORIES: GNPS
Similar Datasets
Project description:For GC-MS analysis, plant material was extracted as following: 50 mg of frozen material was crushed and extracted with 700 uL of pre-cooled methanol (-20oC). Were added 60 uL of adonitol (0.2 mg mL-1, internal standard), with the mixture being centrifuged (10 min at 11000 g) and the supernatant transferred to glasses tubes to add chloroform (375 uL at -20oC) and ultrapure water (750 uL at 4oC), with the polar and non-polar phases being collected separately. The non-polar phase was derivatized with 50 uL of pyridine and 50 uL of BSTFA (N,O-bis-(trimethylsilyl)-trifluoroacetamide) for 1 h at 70oC; 5 uL of tridecanoic acid (2 mg mL-1) was used as internal standard.
The non-polar phase was analyzed by GC-MS equipped with an HP5-MS capillary column (30 m, 0.25 mm, 0.25 um). An initial column temperature was adjusted to 100oC for 5 min, and increasing at a rate of 5oC min-1 to a final temperature of 320oC, with a total run time of 49 min. 1 uL of injection volume with helium as a carrier gas. In both analyses a blank was injected in each 15 samples.
2023-11-25 | MSV000093496 | MassIVE
Project description:For GC-MS analysis, plant material was extracted as following: 50 mg of frozen material was crushed and extracted with 700 uL of pre-cooled methanol (-20oC). Were added 60 uL of adonitol (0.2 mg mL-1, internal standard), with the mixture being centrifuged (10 min at 11000 g) and the supernatant transferred to glasses tubes to add chloroform (375 uL at -20oC) and ultrapure water (750 uL at 4oC), with the polar and non-polar phases being collected separately.
The polar phase was derivatized using methoxyamine hydrochloride (20 mg mL-1 in pyridine; 28 uL, for two hours at 37oC) and 48 uL of MSTFA (N-Methyl-N-(trimethylsilyl) trifluoroacetamide) for 30 min at 37oC.
Samples were injected (1 uL) into a gas chromatograph (6850 Network GC System - Agilent) coupled to a mass spectrometer (Agilent 5975C VL MSD) (GC-MS) equipped with the VF-5ms column (30 m, 0.25 mm, 0.25 um) and a pre-column (0.25 mm, 10 m). The initial column temperature was adjusted to 70oC for 5 min, increasing at a rate of 5oC min-1 to a final temperature of 295oC, with a total run time of 50 min, with Helium as the carrier gas.
2023-11-25 | MSV000093495 | MassIVE
Project description:For GC-MS analysis, plant material was extracted as following: 50 mg of frozen material was crushed and extracted with 700 uL of pre-cooled methanol (-20oC). Were added 60 uL of adonitol (0.2 mg mL-1, internal standard), with the mixture being centrifuged (10 min at 11000 g) and the supernatant transferred to glasses tubes to add chloroform (375 uL at -20oC) and ultrapure water (750 uL at 4oC), with the polar and non-polar phases being collected separately.
The polar phase was derivatized using methoxyamine hydrochloride (20 mg mL-1 in pyridine; 28 uL, for two hours at 37oC) and 48 uL of MSTFA (N-Methyl-N-(trimethylsilyl) trifluoroacetamide) for 30 min at 37oC.
Samples were injected (1 uL) into a gas chromatograph (6850 Network GC System - Agilent) coupled to a mass spectrometer (Agilent 5975C VL MSD) (GC-MS) equipped with the VF-5ms column (30 m, 0.25 mm, 0.25 um) and a pre-column (0.25 mm, 10 m). The initial column temperature was adjusted to 70oC for 5 min, increasing at a rate of 5oC min-1 to a final temperature of 295oC, with a total run time of 50 min, with Helium as the carrier gas.
2023-11-25 | MSV000093495 | GNPS
Project description:<p>The sample to be tested was fully ground into powder in the grinder, 50 mg of the sample was freeze-dried, 1000 μL of the extraction solution containing the inner target was added (methanol:acetonitrile:water, 2:2:1, v/v/v, internal standard concentration 20 mg/L) and vortex mixed for 30 s; then add the steel ball to the 45 Hz grinder for 10 min, ultrasonic 10 min; the sample to be tested is obtained after filtration. When detecting metabolites, metabolite determination was performed based on the LC-MS system, which mainly consists of Waters Acquity I-Class PLUS ultra-high performance liquid tandem and Waters Xevo G2-XS QTof high-resolution mass spectrometer. Meanwhile, the Waters Acquity UPLC HSS T3 column (1.8 um 2.1 x 100 mm) was used as the chromatographic column. Positive and negative ion modes were used to determine the metabolites. Mobile phase A: 0.1% formic acid aqueous solution; Mobile phase B: 0.1% acetonitrile formate. The mobile phase conditions of liquid chromatography were as follows: the flow rate was 400 μL/min, 0.0 min: 98% flow A, 2% flow B; 0.25 min: 98% flow A, 2% flow B, 10.0 min: 2% flow A, 98% flow B; 13.0 min: 2% flow A, 98% flow B; 13.1 min: 98% flow A, 2% flow B; 15.0 min: 98% flow A, 2% flow B. MSe mode controlled by acquisition software (MassLynx v4.2, Waters) was used for primary and secondary mass spectrum data acquisition. ESI ion source parameters are as follows: Capillary voltage, 2500 V (positive ion mode) or -2000 V (negative ion mode); Cone hole voltage, 30 V; Ion source temperature, 100 °C; Desolvent temperature, 500 °C; Air flow rate, 50 L/h; Desolvent gas flow rate, 800 L/h; Plastic-nucleus ratio (m/z) collection range 50-1200 m/z. In the qualitative and quantitative analysis of metabolites, the original data collected by MassLynx v4.2 were processed by the Progenesis QI software for peak extraction, peak alignment, and other data, and the metabolites were identified based on the Progenesis QI software online METLIN database. Then, based on the results of the total score, MS2 score, and mass error (ppm), the metabolites were qualitatively determined.</p>
2024-07-12 | MTBLS10002 | MetaboLights
Project description:MicroPoly(A)Pure kits (Ambion) were used to prepare mRNA from P. salmonis-infected and control Atlantic salmon head kidney. Head kidney mRNA samples were prepared from pooled (n = 10) infected or control kidney. Approximately 200 ng of infected or control head kidney mRNA was used as template in aRNA synthesis reactions. Two infected head kidney samples were pooled to yield 8.9 ug of aRNA, and a single control head kidney sample contained 8.4 ug of aRNA. Infected and control head kidney aRNA samples were visualized on agarose gels to check quality and quantity (data not shown). Except for the amounts of aRNA and reverse transcription (RT) primer used, head kidney target labeling reactions and microarray hybridizations were identical. Head kidney target syntheses used 2 ug of aRNA and 2 ug of random primers (Roche). RT primers were mixed with aRNA samples, and nuclease-free H2O (Invitrogen) was added to make 10 ul total volume. Samples were incubated at 70 degrees C for 4 min, then placed on ice. RT reactions included 50 mM Tris HCl pH 8.3, 75 mM KCl, 3 mM MgCl2, 10 mM DTT, 0.5 mM each dATP, dCTP, and dGTP, 0.2 mM dTTP, 0.05 mM Cy3-dUTP or Cy5-dUTP (Amersham), 40U RNAguard ribonuclease inhibitor (Amersham), and 400U Superscript II Rnase H- reverse transcriptase (Invitrogen). RT reactions were incubated at 42 degrees C for 2.5 h, followed by addition of 0.025U RNase A (Sigma) and 1.5U RNase H (New England BioLabs) and incubation at 37 degrees C for 30 min. Labeled targets were cleaned using the Qiaquick PCR purification kit (Qiagen) and precipitated, with 300 mM sodium acetate, 1 ul of 20 ug/ul glycogen (Invitrogen), and 2.5 volumes of 100% ethanol, at -20 degrees C overnight. Each labeled target was recovered by centrifugation (14,000 rpm, 4 degrees C, 1 h), washed in 70% ethanol, air-dried, and resuspended in 60 ul of hybridization buffer: 50% deionized formamide, 5X SSC, 0.1% SDS, 5 ul of 5 ug/ul oligo dT (5’T18[Q-N]3’), 5 ul of 2 ug/ul BSA (Pierce), and 2 ul of 10 ug/ul sonicated human placental DNA (Sigma). Targets were incubated at 96 degrees C for 3 min, and then at 65 degrees C until applied to microarrays. Microarrays were prepared for hybridization by washing 2 X 5 min in 0.1% SDS, washing 5 X 1 min in MilliQ H2O, immersing 3 min in 95 degrees C MilliQ H2O, and drying by centrifugation (2000 rpm, 5 min, in 50 ml conical tube). Microarray hybridizations were run in the dark under HybriSlips hybridization covers (Grace Biolabs) in slide hybridization chambers (Corning) submerged in a 45 degrees C water bath for 16 h. Coverslips were floated off in 45 degrees C (1X SSC, 0.2% SDS), and arrays were washed 1 X 10 min in 45 degrees C (1X SSC, 0.2% SDS), 3 X 4 min in room temperature (0.1X SSC, 0.1% SDS), and 4 X 4 min in room temperature 0.1X SSC. Slides were dried by centrifugation as before. Fluorescent images of hybridized arrays were acquired immediately at 10 um resolution using ScanArray Express (PerkinElmer). The Cy3 and Cy5 cyanine fluors were excited at 543 nm and 633 nm respectively, and the same laser power (90%) and photomultiplier tube (PMT) settings were used for all slides in a study (PMT 75 Cy3, PMT 63 or 64 Cy5 for head kidney study). Fluorescent intensity data were extracted from TIF images using Imagene 5.5 software (Biodiscovery). Keywords: other
2004-02-11 | GSE1031 | GEO
Project description:Sample preparation: P-AMPK+AMP, P-AMPK+ATPγS, and AMPK+ATPγS protein samples were crosslinked in HBST buffer (25 mM HEPES pH 7.5 at room temperature, 200 mM NaCL, and 1 mM TCEP). Non-crosslinked negative controls were generated using the same procedure without the addition of DSSO. Reactions were initiated by spiking 1 uL of 75 mM DSSO (Thermo-Fisher) in DMSO into a 50 uL solution containing 10 uM protein and mixing. The final molar ratio of crosslinker:protein was 150:1. The reactions were incubated at 25°C for 45 minutes prior to being quenched by the addition of Tris pH 8.0 to a final concentration of 50 mM. Each crosslink reaction was done in triplicate and the reaction replicates were pooled after quenching. 10 μL samples of the pooled samples were loaded for SDS-PAGE analysis with Coomassie staining to confirm the presence of crosslinked protein. The remaining 140 μL of crosslinked and non-crosslinked samples were then acetone precipitated at -20°C overnight and the protein was pelleted by centrifugation at 16,000 rcf for 5 minutes at 4°C. After decanting, the pellets were dried for 15 minutes at room temperature before being resuspended in 12.5 uL of resuspension buffer (50 mM ammonium bicarbonate, 8M urea, pH 8.0). ProteaseMAX (Promega) was added to 0.02% and the solutions were mixed on an orbital shaker operating at 400 RPM for 5 minutes. After resuspension, 87.5 uL of digestion buffer (50 mM ammonium bicarbonate, pH 8.0) was added. Cysteines in the protein samples were reduced and akylated as follows. DTT was added to 5 mM final concentration and the protein solutions were incubated at 56°C in an orbital shaker operating at 400 RPM and for 20 minutes. After reduction, 2.7 uL of 550 mM iodoacetamide was added and the solutions were incubated in the dark at room temperature for 15 minutes. Reduced and alkylated protein solutions were digested using trypsin at a ratio of 1:200 (w/w trypsin:protein) and incubating at 37°C. After overnight incubation at 37°C, the samples were acidified by the addition of trifluoroacetic acid (TFA, Thermo-Fischer) to 1%. Samples were then frozen and stored at -20°C until analysis.
2021-07-08 | PXD019017 | Pride
Project description:MicroPoly(A)Pure kits (Ambion) were used to prepare mRNA from P. salmonis-infected and control Atlantic salmon macrophages. Infected and control (24 h incubation) macrophage mRNA samples were subjected to two rounds of amplification using the MessageAmp aRNA kit (Ambion) and manufacturer's instructions. Approximately 400 ng of macrophage mRNA was used as template in the first round of amplification, yielding 8.1 ug of infected macrophage aRNA and 7.8 ug of control macrophage aRNA. Approximately 1 ug of first-round macrophage aRNA was used as template in the second round of amplification, yielding 81.2 ug of infected macrophage aRNA and 83.3 ug of control macrophage aRNA. Infected and control macrophage aRNA samples were visualized on agarose gels to check quality and quantity. Except for the amounts of aRNA and reverse transcription (RT) primer used, macrophage target labeling reactions and microarray hybridizations were identical. Macrophage target syntheses used 5 ug of second-round aRNA and 5 ug of random primers (Roche). RT primers were mixed with aRNA samples, and nuclease-free H2O (Invitrogen) was added to make 10 ul total volume. Samples were incubated at 70 degrees C 4 min, then placed on ice. RT reactions included 50 mM Tris HCl pH 8.3, 75 mM KCl, 3 mM MgCl2, 10 mM DTT, 0.5 mM each dATP, dCTP, and dGTP, 0.2 mM dTTP, 0.05 mM Cy3-dUTP or Cy5-dUTP (Amersham), 40U RNAguard ribonuclease inhibitor (Amersham), and 400U Superscript II Rnase H- reverse transcriptase (Invitrogen). RT reactions were incubated at 42 degrees C for 2.5 h, followed by addition of 0.025U RNase A (Sigma) and 1.5U RNase H (New England BioLabs) and incubation at 37 degrees C for 30 min. Labeled targets were cleaned using the Qiaquick PCR purification kit (Qiagen) and precipitated, with 300 mM sodium acetate, 1 ul of 20 ug/ul glycogen (Invitrogen), and 2.5 volumes of 100% ethanol, at -20 degrees C overnight. Each labeled target was recovered by centrifugation (14,000 rpm, 4 degrees C, 1 h), washed in 70% ethanol, air-dried, and resuspended in 60 ul of hybridization buffer: 50% deionized formamide, 5X SSC, 0.1% SDS, 5 ul of 5 ug/ul oligo dT (5'T18[Q-N]3'), 5 ul of 2 ug/ul BSA (Pierce), and 2 ul of 10 ug/ul sonicated human placental DNA (Sigma). Targets were incubated at 96 degrees C for 3 min, and then at 65 degrees C until applied to microarrays. Microarrays were prepared for hybridization by washing 2 X 5 min in 0.1% SDS, washing 5 X 1 min in MilliQ H2O, immersing 3 min in 95 degrees C MilliQ H2O, and drying by centrifugation (2000 rpm, 5 min, in 50 ml conical tube). Microarray hybridizations were run in the dark under HybriSlips hybridization covers (Grace Biolabs) in slide hybridization chambers (Corning) submerged in a 45 degrees C water bath for 16 h. Coverslips were floated off in 45 degrees C (1X SSC, 0.2% SDS), and arrays were washed 1 X 10 min in 45 degrees C (1X SSC, 0.2% SDS), 3 X 4 min in room temperature (0.1X SSC, 0.1% SDS), and 4 X 4 min in room temperature 0.1X SSC. Slides were dried by centrifugation as before. Fluorescent images of hybridized arrays were acquired immediately at 10 um resolution using ScanArray Express (PerkinElmer). The Cy3 and Cy5 cyanine fluors were excited at 543 nm and 633 nm respectively, and the same laser power (90%) and photomultiplier tube (PMT) settings were used for all slides in a study (PMT 72 Cy3, PMT 63 or 64 Cy5 for macrophage study). Fluorescent intensity data were extracted from TIF images using Imagene 5.5 software (Biodiscovery). Keywords: other
2004-02-11 | GSE1012 | GEO
Project description:Female Sprague-Dawley rats were randomly separated into two groups: i) trained (Ex group) and ii) sedentary (Cont group). Animals from the Ex group were adapted to treadmill exercise for two consecutive weeks, involving a gradual increase in the running time till 60 min/day at 20 m/min, 0% grade, 5 days/week. This exercise program remained constant until the end of the 54 weeks. Mitochondria isolation from 10 animals (5 Ex group and 5 Cont group) was performed using the conventional methods of differential centrifugation. Mitochondrial protein extracts were reduced with dithiothreitol, alkylated with iodoacetamide and digested with trypsin using the FASP procedure (18). Briefly, each sample was solubilized in 4 % SDS, 0.1 M DTT, 0.1 M HEPES and incubated for 30 min at 60 C. Then, samples were mixed with 0.2 mL of a solution of 8 M Urea, 0.1 M HEPES, pH 8.5 (UH solution), loaded into the filtration devices (3k Microcon, Millipore), centrifuged at 14,000 g for 20 min, and washed twice with UH solution. After centrifugation, the concentrates were alkylated with 50 mM iodoacetamide in UH solution (dark, 25 C, 20 min), and washed twice with UH solution. The concentrate was diluted with 0.1 mL of 50 mM ammonium bicarbonate (ABC) and digested overnight (37 C) with the addition of 2 ug of trypsin diluted in 30 uL of 50 mM ABC. The resulting tryptic peptides were collected by centrifugation and the filter were washed twice with 50 uL of 50 mM ABC. Eluted peptides were acidified with 10 uL of formic acid and cleaned up on a homemade Empore C18 column (3M, St. Paul, MN, USA) (ref) for subsequent phospho-enrichment and/or analysis by LC-MS/MS. The dried protein digest was dissolved with 10 uL (3 % ACN, 0.1 % TFA), diluted 1:5 with loading buffer (1 M glycolic acid, 5 % TFA, 80 % ACN) and phosphopeptides were enriched on TiO2-beads as previously described (19). Briefly 5 mg of "Titansphere TiO2 5 um" were suspended in 100 uL of 100 % ACN, immobilized in a pipette-column and washed using 5 uL of loading buffer. Each sample was loaded in each pipette-column and then washed with 30 uL of washing buffer (1 % TFA, 80 % ACN). Phosphopeptides were eluted from the beads with 25 uL of 25 % ACN (v/v) containing 25 % NH4OH (m/v), acidified with 10 uL of 10 % TFA and vacuum- concentrated to approximately 4 uL. Samples were finally diluted to 10 uL with H2O + 0.1% formic acid prior to injection. The peptides mixtures were analyzed by online nanoflow liquid chromatography tandem mass spectrometry (nanoLC-MS/MS) on an EASY-nLC system (Proxeon Biosystems, Odense, Denmark) connected to the LTQ Orbitrap Velos instrument (Thermo Fisher Scientific, Bremen, Germany) through a nanoelectrospray ion source. Six microliters of the peptide mixture were auto-sampled directly onto the analytical HPLC column (120 mm x75 um I.D., 3 um particle size (Nikkyo Technos Co., Ltd.) with a 120-min gradient from 5 % to 50 % ACN in 0.1 % FA. The effluent from the HPLC column was directly electrosprayed into the mass spectrometer. The LTQ Orbitrap Velos instrument was operated in data-dependent acquisition mode to automatically switch between full scan MS and MS/MS acquisition. The MS survey scan was performed in the FT cell recording a window between 350 and 2000 m/z. The resolution was set to 60 000, and the automatic gain control was set to 1,000,000 ions with a maximal acquisition time of 400 ms. The 20 most intense peptide ions with charge states great than or equal to 2 were sequentially isolated to a target value of 5,000 and fragmented in the high-pressure linear ion trap by low-energy CID with normalized collision energy of 35% Q value of 0.25, and an activation time of 10 ms. Raw files were processed using Proteome Discoverer version 1.3 (Thermo Fisher Scientific, Bremen). Peak lists were searched using Mascot software version 2.3 (Matrix Science, UK) against a SwissProt database containing entries corresponding to Rattus norvegicus (version of July 2012), a list of common contaminants, and all the corresponding decoy entries. Trypsin was chosen as enzyme and a maximum of two miscleavages were allowed. Carbamidomethylation (C) was set as a fixed modification, whereas oxidation (M) and phosphorylation (STY) were used as variable modifications. Searches were performed using a peptide tolerance of 7 ppm, a product ion tolerance of 0.5 Da. Resulting data files were filtered for FDR less than 1 % at peptide level.
2014-02-14 | PXD000354 | Pride
Project description:To investigate the mechanisms of endotoxin-mediated kidney injury as well as renoprotective effects of endotoxin preconditioning, we performed manual microdissection of S2/S3 proximal tubules in mice as follows: 1) Non-preconditioned mice subjected to single-dose 5 mg/kg LPS (0111:B4) i.p. for 4 hrs. 2) Non-preconditioned mice subjected to single-dose 5 mg/kg LPS (0111:B4) for 24 hrs. 3) Preconditioned mice subjected to 0.25 mg/kg LPS followed 24 hour later by 5 mg/kg LPS for 4 hrs. 4) Preconditioned mice subjected to 0.25 mg/kg LPS followed 24 hour later by 5 mg/kg LPS for 24 hrs. 5) Control mice (untreated).
2018-10-06 | GSE120879 | GEO
Project description:Patients received standardized coartem therapy. Briefly, each pill contains 20 mg of artemether and 120 mg of lumefantrine. The dose and total coarse of tablets is based on the patients body weight. Blood was drawn from patients prior to anti-malarial treatment (day 0) and after treatment (day42 for children and day 28 for adults). Peripheral Blood Mononuclear Cells were isolated from all patients. Briefly, for PBMC isolation, whole blood from was diluted 1:2 in sterile PBS and overlaid on Ficoll Paque-PLUS in 50 mL conical tubes and centrifuged 800xg for 15 minutes at 25°C with no brake. Resulting buffy coats were collected and washed twice in RPMI 1640 medium, and then cells were treated with Red Blood Cell Lysis Buffer for 3 minutes at room temperature. Cells were washed in RPMI and counted on a hemacytometer. Monocytes were purified from PBMC using a miltenyi Pan Monocyte Isolation negative selection kit according to the manufacturer's instructions. For each sample. 50,000 viable cells were pelleted and lysed with cold ATAC-Resuspension Buffer (RSB) containing 0.1% NP40, 0.1% Tween-20, and 0.01% Digitonin and incubated in ice for 3 minutes. The lysaste was washed with 1 ml of cold ATAC-RSB containing 0.1% Tween-20 but NO NP40 or digitonin. Nuclei were pelleted at 500 RCF for 10 min at 4 degrees celcius. The supernatant was discarded and the pellet was resuspended in 50 uL of transposition mixture (25 ul 2x TD buffer, 2.5 ul transposase (100nM final), 16.5 ul PBS,0.5 ul 1% digitonin, 0.5 ul 10% Tween-20, 5 ul H2O). The reaction was incubated for 30 minutes in a thermomixer with 1000 RPM mixing. Zymo DNA Clean and concentrator kit (cat# D4014) was used as a cleanup step. The DNA was amplified at 98 degrees C for 30 seconds, then 13 cycles of: 98 degrees C for 10 seconds, 63 degrees C for 30 seconds, 72 degrees C for 1 minute.The library was evaluated in an Agilent TapeStation system and the DNA concentration evaluated by Qubit. Sequencing was performed on Illumina Nextseq 500 with Buffer cartridge v2: Ref: 15057941, High output reagent cartridge v2: Ref: 15057934, NextSeq accessory Box v2: Ref: 15058251, and High output Flow Cell cartridge v2.5: Ref: 20022408
2022-04-24 | E-MTAB-11643 | biostudies-arrayexpress