GNPS - Brittonodoxa subpinnata polar extracts
Ontology highlight
ABSTRACT:
INSTRUMENT(S): GC-MS (Agilent 6850 Network GC System /Agilent 5975C VL MSD)
ORGANISM(S): Brittonodoxa Subpinnata
SUBMITTER: 
Wilton Ricardo Sala-Carvalho
PROVIDER: MSV000093495 | GNPS | Sat Nov 25 12:27:00 GMT 2023
REPOSITORIES: GNPS
Similar Datasets
Project description:For GC-MS analysis, plant material was extracted as following: 50 mg of frozen material was crushed and extracted with 700 uL of pre-cooled methanol (-20oC). Were added 60 uL of adonitol (0.2 mg mL-1, internal standard), with the mixture being centrifuged (10 min at 11000 g) and the supernatant transferred to glasses tubes to add chloroform (375 uL at -20oC) and ultrapure water (750 uL at 4oC), with the polar and non-polar phases being collected separately.
The polar phase was derivatized using methoxyamine hydrochloride (20 mg mL-1 in pyridine; 28 uL, for two hours at 37oC) and 48 uL of MSTFA (N-Methyl-N-(trimethylsilyl) trifluoroacetamide) for 30 min at 37oC.
Samples were injected (1 uL) into a gas chromatograph (6850 Network GC System - Agilent) coupled to a mass spectrometer (Agilent 5975C VL MSD) (GC-MS) equipped with the VF-5ms column (30 m, 0.25 mm, 0.25 um) and a pre-column (0.25 mm, 10 m). The initial column temperature was adjusted to 70oC for 5 min, increasing at a rate of 5oC min-1 to a final temperature of 295oC, with a total run time of 50 min, with Helium as the carrier gas.
2023-11-25 | MSV000093495 | MassIVE
Project description:For GC-MS analysis, plant material was extracted as following: 50 mg of frozen material was crushed and extracted with 700 uL of pre-cooled methanol (-20oC). Were added 60 uL of adonitol (0.2 mg mL-1, internal standard), with the mixture being centrifuged (10 min at 11000 g) and the supernatant transferred to glasses tubes to add chloroform (375 uL at -20oC) and ultrapure water (750 uL at 4oC), with the polar and non-polar phases being collected separately. The non-polar phase was derivatized with 50 uL of pyridine and 50 uL of BSTFA (N,O-bis-(trimethylsilyl)-trifluoroacetamide) for 1 h at 70oC; 5 uL of tridecanoic acid (2 mg mL-1) was used as internal standard.
The non-polar phase was analyzed by GC-MS equipped with an HP5-MS capillary column (30 m, 0.25 mm, 0.25 um). An initial column temperature was adjusted to 100oC for 5 min, and increasing at a rate of 5oC min-1 to a final temperature of 320oC, with a total run time of 49 min. 1 uL of injection volume with helium as a carrier gas. In both analyses a blank was injected in each 15 samples.
2023-11-25 | MSV000093496 | MassIVE
Project description:For GC-MS analysis, plant material was extracted as following: 50 mg of frozen material was crushed and extracted with 700 uL of pre-cooled methanol (-20oC). Were added 60 uL of adonitol (0.2 mg mL-1, internal standard), with the mixture being centrifuged (10 min at 11000 g) and the supernatant transferred to glasses tubes to add chloroform (375 uL at -20oC) and ultrapure water (750 uL at 4oC), with the polar and non-polar phases being collected separately. The non-polar phase was derivatized with 50 uL of pyridine and 50 uL of BSTFA (N,O-bis-(trimethylsilyl)-trifluoroacetamide) for 1 h at 70oC; 5 uL of tridecanoic acid (2 mg mL-1) was used as internal standard.
The non-polar phase was analyzed by GC-MS equipped with an HP5-MS capillary column (30 m, 0.25 mm, 0.25 um). An initial column temperature was adjusted to 100oC for 5 min, and increasing at a rate of 5oC min-1 to a final temperature of 320oC, with a total run time of 49 min. 1 uL of injection volume with helium as a carrier gas. In both analyses a blank was injected in each 15 samples.
2023-11-25 | MSV000093496 | GNPS
Project description:Bacteria were washed three times in NaCl (150 mM). Cells were resuspended in 1 ml TSU buffer (50 mM Tris pH 8.0, 0.1% SDS, 2.5 M urea) and lysed by two freeze-thaw cycles in liquid nitrogen. Lysate proteins (40 ug) were separated and digested. Digested peptides were separated by nano-LC using an Ultimate 3000 HPLC and autosampler system (Dionex; Amsterdam, Netherlands). Samples (1 ul) were concentrated and desalted onto a micro C18 pre-column (500 um×2 mm, Michrom Bioresources; Auburn, CA, USA) with H2O:CH3CN (98:2, 0.05% trifluoroacetic acid) at 15 ul min−1. After a 4 min wash the pre-column was switched (Valco 10 port valve; Dionex) into line with a fritless nano column (75 u×~10 cm) containing C18 media (5 u, 200 A Magic; Michrom) manufactured according to Gatlin. Peptides were eluted using a linear gradient of H2O:CH3CN (98:2, 0.1% formic acid) to H2O:CH3CN (64:36, 0.1% formic acid) at 250 nl min−1 over 30 min. High voltage (2000 V) was applied to low volume tee (Upchurch Scientific) and the column tip positioned ~0.5 cm from the heated capillary (T = 280 degrees C) of an Orbitrap Velos (Thermo Electron; Bremen, Germany) mass spectrometer. Positive ions were generated by electrospray and the Orbitrap operated in data dependent acquisition mode (DDA). A survey scan m/z 350–1750 was acquired in the Orbitrap (Resolution = 30,000 at m/z 400, with an accumulation target value of 1,000,000 ions) with lockmass enabled. Up to the 10 most abundant ions (>5,000 counts) with charge states >+2 were sequentially isolated and fragmented within the linear ion trap using collisionally induced dissociation with an activation q = 0.25 and activation time of 30 ms at a target value of 30,000 ions. M/z ratios selected for MS/MS were dynamically excluded for 30 s. Peak lists were generated using Mascot Daemon/extract_msn (Matrix Science, Thermo; London, England) using the default parameters, and submitted to the database search program Mascot (version 2.1, Matrix Science). Search parameters were: Precursor tolerance 4 ppm and product ion tolerances +/-0.4 Da; Oxidation (M) and Carbamidomethyl (C) specified as variable modifications, Enzyme specificity was trypsin, 1 missed cleavage was possible
2014-04-28 | PXD000504 | Pride
Project description:Washed three times in NaCl (150 mM). Cells were resuspended in 1 ml TSU buffer (50 mM Tris pH 8.0, 0.1% SDS, 2.5 M urea) and lysed by two freeze-thaw cycles in liquid nitrogen. Lysate proteins (40 ug) were separated and digested. Digested peptides were separated by nano-LC using an Ultimate 3000 HPLC and autosampler system (Dionex; Amsterdam, Netherlands). Samples (1 ul) were concentrated and desalted onto a micro C18 pre-column (500 um×2 mm, Michrom Bioresources; Auburn, CA, USA) with H2O:CH3CN (98:2, 0.05% trifluoroacetic acid) at 15 ul min−1. After a 4 min wash the pre-column was switched (Valco 10 port valve; Dionex) into line with a fritless nano column (75 u×~10 cm) containing C18 media (5 u, 200 A Magic; Michrom) manufactured according to Gatlin. Peptides were eluted using a linear gradient of H2O:CH3CN (98:2, 0.1% formic acid) to H2O:CH3CN (64:36, 0.1% formic acid) at 250 nl min−1 over 30 min. High voltage (2000 V) was applied to low volume tee (Upchurch Scientific) and the column tip positioned ~0.5 cm from the heated capillary (T = 280 degrees C) of an Orbitrap Velos (Thermo Electron; Bremen, Germany) mass spectrometer. Positive ions were generated by electrospray and the Orbitrap operated in data dependent acquisition mode (DDA). A survey scan m/z 350–1750 was acquired in the Orbitrap (Resolution = 30,000 at m/z 400, with an accumulation target value of 1,000,000 ions) with lockmass enabled. Up to the 10 most abundant ions (>5,000 counts) with charge states >+2 were sequentially isolated and fragmented within the linear ion trap using collisionally induced dissociation with an activation q = 0.25 and activation time of 30 ms at a target value of 30,000 ions. M/z ratios selected for MS/MS were dynamically excluded for 30 s. Peak lists were generated using Mascot Daemon/extract_msn (Matrix Science, Thermo; London, England) using the default parameters, and submitted to the database search program Mascot (version 2.1, Matrix Science). Search parameters were: Precursor tolerance 4 ppm and product ion tolerances +/-0.4 Da Oxidation (M) and Carbamidomethyl (C) specified as variable modifications Enzyme specificity was trypsin, 1 missed cleavage was possible
2014-04-28 | PXD000505 | Pride
Project description:Samples from methanolic extracts from skins of poison frogs. Split injection mode using a desorption temperature of 250C. Separation was performed initiating to 100C for 3 min, and then increasing the temperature to 190C using a rate of 10C/min and maintaining it by 1 min, afterwards incresing to 200C changing the rate to 2C/min and maintaining it by 1 min, and finally increasing to 280C, using a rate of 10C/min, and maintaing to this temperature for 3 min. Analysis were performed in a GC HP 6890 Series equipped with an Agilent Mass Selective Detector 5973 (Agilent technologies, Palo Alto, CA, USA). Separation was performed on a BP-5 capillary GC column (30 m 0.25 mm 0.25 um, SGE, Austin, TX, USA) using helium as a carrier gas at a flow rate of 1.1 mL/mi
2019-08-16 | MSV000084212 | MassIVE
Project description:Samples from extraction of volatile organic compounds from frogs using two sampling methods: in vivo and sampling from the skin and a DVB/CAR/PDMS-SPME fiber. Splitless injection mode using a desorption temperature of 250C. Separation was performed initiating to 40C for 3 min, and then increasing the temperature to 100C using a rate of 6C/min, afterwards incresing to 200C changing the rate to 4C/min, and finally increasing to 300C, using a rate of 20C/min, and maintaing to this temperature for 3 min. Analysis were performed in a GC HP 6890 Series equipped with an Agilent Mass Selective Detector 5973 (Agilent technologies, Palo Alto, CA, USA). Separation was performed on a BP-5 capillary GC column (30 m 0.25 mm 0.25 um, SGE, Austin, TX, USA) using helium as a carrier gas at a flow rate of 1.0 mL/min.
2019-08-15 | MSV000084211 | MassIVE
Project description:Female Sprague-Dawley rats were randomly separated into two groups: i) trained (Ex group) and ii) sedentary (Cont group). Animals from the Ex group were adapted to treadmill exercise for two consecutive weeks, involving a gradual increase in the running time till 60 min/day at 20 m/min, 0% grade, 5 days/week. This exercise program remained constant until the end of the 54 weeks. Mitochondria isolation from 10 animals (5 Ex group and 5 Cont group) was performed using the conventional methods of differential centrifugation. Mitochondrial protein extracts were reduced with dithiothreitol, alkylated with iodoacetamide and digested with trypsin using the FASP procedure (18). Briefly, each sample was solubilized in 4 % SDS, 0.1 M DTT, 0.1 M HEPES and incubated for 30 min at 60 C. Then, samples were mixed with 0.2 mL of a solution of 8 M Urea, 0.1 M HEPES, pH 8.5 (UH solution), loaded into the filtration devices (3k Microcon, Millipore), centrifuged at 14,000 g for 20 min, and washed twice with UH solution. After centrifugation, the concentrates were alkylated with 50 mM iodoacetamide in UH solution (dark, 25 C, 20 min), and washed twice with UH solution. The concentrate was diluted with 0.1 mL of 50 mM ammonium bicarbonate (ABC) and digested overnight (37 C) with the addition of 2 ug of trypsin diluted in 30 uL of 50 mM ABC. The resulting tryptic peptides were collected by centrifugation and the filter were washed twice with 50 uL of 50 mM ABC. Eluted peptides were acidified with 10 uL of formic acid and cleaned up on a homemade Empore C18 column (3M, St. Paul, MN, USA) (ref) for subsequent phospho-enrichment and/or analysis by LC-MS/MS. The dried protein digest was dissolved with 10 uL (3 % ACN, 0.1 % TFA), diluted 1:5 with loading buffer (1 M glycolic acid, 5 % TFA, 80 % ACN) and phosphopeptides were enriched on TiO2-beads as previously described (19). Briefly 5 mg of "Titansphere TiO2 5 um" were suspended in 100 uL of 100 % ACN, immobilized in a pipette-column and washed using 5 uL of loading buffer. Each sample was loaded in each pipette-column and then washed with 30 uL of washing buffer (1 % TFA, 80 % ACN). Phosphopeptides were eluted from the beads with 25 uL of 25 % ACN (v/v) containing 25 % NH4OH (m/v), acidified with 10 uL of 10 % TFA and vacuum- concentrated to approximately 4 uL. Samples were finally diluted to 10 uL with H2O + 0.1% formic acid prior to injection. The peptides mixtures were analyzed by online nanoflow liquid chromatography tandem mass spectrometry (nanoLC-MS/MS) on an EASY-nLC system (Proxeon Biosystems, Odense, Denmark) connected to the LTQ Orbitrap Velos instrument (Thermo Fisher Scientific, Bremen, Germany) through a nanoelectrospray ion source. Six microliters of the peptide mixture were auto-sampled directly onto the analytical HPLC column (120 mm x75 um I.D., 3 um particle size (Nikkyo Technos Co., Ltd.) with a 120-min gradient from 5 % to 50 % ACN in 0.1 % FA. The effluent from the HPLC column was directly electrosprayed into the mass spectrometer. The LTQ Orbitrap Velos instrument was operated in data-dependent acquisition mode to automatically switch between full scan MS and MS/MS acquisition. The MS survey scan was performed in the FT cell recording a window between 350 and 2000 m/z. The resolution was set to 60 000, and the automatic gain control was set to 1,000,000 ions with a maximal acquisition time of 400 ms. The 20 most intense peptide ions with charge states great than or equal to 2 were sequentially isolated to a target value of 5,000 and fragmented in the high-pressure linear ion trap by low-energy CID with normalized collision energy of 35% Q value of 0.25, and an activation time of 10 ms. Raw files were processed using Proteome Discoverer version 1.3 (Thermo Fisher Scientific, Bremen). Peak lists were searched using Mascot software version 2.3 (Matrix Science, UK) against a SwissProt database containing entries corresponding to Rattus norvegicus (version of July 2012), a list of common contaminants, and all the corresponding decoy entries. Trypsin was chosen as enzyme and a maximum of two miscleavages were allowed. Carbamidomethylation (C) was set as a fixed modification, whereas oxidation (M) and phosphorylation (STY) were used as variable modifications. Searches were performed using a peptide tolerance of 7 ppm, a product ion tolerance of 0.5 Da. Resulting data files were filtered for FDR less than 1 % at peptide level.
2014-02-14 | PXD000354 | Pride
Project description:All samples were collected on cotton then placed into 2 mL borosilicate vials. The GC MS analysis was carried out using the Agilent 7200 GC QTOF Agilent Technologies Santa Clara CA. equipped with a robotic sampler system. The separation was conducted on an HP 5MS column (30 m x 0.25 mm x 0.25 micro m). The patch within the vial was heated for 25 min. at 200 C to desorb volatiles from the patch and 0.5 mL of headspace injected (injector temperature set at 250 C) into the instrument with a headspace syringe heated to 145 C. The GC protocol analysis included starting temperature 45 C min oven ramp (hold of 2 min), 15 C per min oven ramp to 300 C (hold of 3 min), and 50 C per min oven ramp to 320 C purge the column. The helium carrier gas was set to constant 1.2 mL per min flow and a spitless injection mode was applied. The purge flow to split vent rate was 50 ml per min at 1 min. The scanned m z range was 35-400 with the acquisition rate of 10 spectra per s. The empty vial blanks were interspersed with the samples to assess the background signal.
2022-06-22 | MSV000089708 | MassIVE
Project description:<p>The sample to be tested was fully ground into powder in the grinder, 50 mg of the sample was freeze-dried, 1000 μL of the extraction solution containing the inner target was added (methanol:acetonitrile:water, 2:2:1, v/v/v, internal standard concentration 20 mg/L) and vortex mixed for 30 s; then add the steel ball to the 45 Hz grinder for 10 min, ultrasonic 10 min; the sample to be tested is obtained after filtration. When detecting metabolites, metabolite determination was performed based on the LC-MS system, which mainly consists of Waters Acquity I-Class PLUS ultra-high performance liquid tandem and Waters Xevo G2-XS QTof high-resolution mass spectrometer. Meanwhile, the Waters Acquity UPLC HSS T3 column (1.8 um 2.1 x 100 mm) was used as the chromatographic column. Positive and negative ion modes were used to determine the metabolites. Mobile phase A: 0.1% formic acid aqueous solution; Mobile phase B: 0.1% acetonitrile formate. The mobile phase conditions of liquid chromatography were as follows: the flow rate was 400 μL/min, 0.0 min: 98% flow A, 2% flow B; 0.25 min: 98% flow A, 2% flow B, 10.0 min: 2% flow A, 98% flow B; 13.0 min: 2% flow A, 98% flow B; 13.1 min: 98% flow A, 2% flow B; 15.0 min: 98% flow A, 2% flow B. MSe mode controlled by acquisition software (MassLynx v4.2, Waters) was used for primary and secondary mass spectrum data acquisition. ESI ion source parameters are as follows: Capillary voltage, 2500 V (positive ion mode) or -2000 V (negative ion mode); Cone hole voltage, 30 V; Ion source temperature, 100 °C; Desolvent temperature, 500 °C; Air flow rate, 50 L/h; Desolvent gas flow rate, 800 L/h; Plastic-nucleus ratio (m/z) collection range 50-1200 m/z. In the qualitative and quantitative analysis of metabolites, the original data collected by MassLynx v4.2 were processed by the Progenesis QI software for peak extraction, peak alignment, and other data, and the metabolites were identified based on the Progenesis QI software online METLIN database. Then, based on the results of the total score, MS2 score, and mass error (ppm), the metabolites were qualitatively determined.</p>
2024-07-12 | MTBLS10002 | MetaboLights