Shenmai iTRAQ proteome
Ontology highlight
ABSTRACT:
INSTRUMENT(S): TOF/TOF 5800
ORGANISM(S): Rattus Norvegicus (ncbitaxon:10116)
SUBMITTER: 
Yi Wang
PROVIDER: MSV000081954 | MassIVE | Thu Jan 18 18:56:00 GMT 2018
REPOSITORIES: MassIVE
Similar Datasets
Project description:To explore the mechanism underlying cardioprotective effects of SM, iTRAQ-based proteomic approach was applied to analyze protein of myocardium in rats with myocardial ischemic injury.
| MSV000081517 | MassIVE
Project description:In this study, we applied the isobaric tags for relative and absolute quantitation (iTRAQ) technique to detect alterations in the proteomic profile of the jejunal mucosa using a porcine model in which piglets were offered the protein-limited (PL) diet. Protein identification and quantification for iTRAQ experiments were performed using ProteinPilot (v4.0.8085) software. The LC-MS/MS data were searched against the UniProtKB (sus scrofa). To minimize the false discovery rate (FDR), a threshold for protein identification was applied, with the confident value > 95% (amount to the confident value “unused ProtScore” > 1.3 in ProteinPilot software), and at least one unique peptide was considered for protein identification. Proteins that were quantified with fold change > 2.0 were considered to be differentially expressed proteins. We identified 5275 proteins, 202 of which were differentially expressed. Furthermore, we adopted function annotation analysis of all identified proteins and function enrichment analysis of all differentially expressed proteins to explore more meaningful proteins and pathways.
2016-12-22 | PXD004069 | Pride
Project description:Three iTRAQ8plex experiment replicate using TripleToF 5600 system. Protein identification were performed using the ProteinPilot software (version 4.0.8085,Paragon Algorithm version 4.0.0.0).All MS/MS spectra was search against amino acids sequences which is annotated from genome. The search parameters was set as follows: Cys. Alkylation: Iodoacetic acid, Digestion: Trypsin, ID Focus: Biological modifications, Search Effort: Thorough. The search results was filter using Local FDR 5%.
2014-04-16 | PXD000326 | Pride
Project description:With the use of iTRAQ technique, a multifactorial comparative proteomic study can be performed. In this study, to obtain an overview of ethanol, CYP2E1 and gender effects on liver injury and gain more insight into the underlying molecular mechanism, mouse liver proteomes were quantitatively analyzed using iTRAQ under eight conditions including mice of different genders, wild type versus CYP2E1 knockout, and normal versus alcohol diet. A series of statistical and bioinformatic analyses were explored to simplify and clarify multifactorial comparative proteomic data. MALDI plates were analyzed with a TOF/TOF 5800 mass spectrometer (AB Sciex). The instrument was calibrated using the 4700 mass calibration standard. MS spectra between m/z 800 and 4,000 were acquired for every spot using 1,000 laser shots in reflector mode. The 20 most intense ion signals per spot having a S/N > 10 were selected as precursors for MS/MS acquisition using 2,000 laser shots. Peptide and protein identifications were performed with the ProteinPilot Software 4.5 (AB Sciex) using the Paragon algorithm. Combined data and spectra from all 24 OFFGEL fractions were searched against the UniProt mouse database (release-2010_11). The following search parameters were selected: iTRAQ 8-plex peptide label, cysteine alkylation, trypsin specificity, ID focus on biological modifications, and processing including quantitation and thorough ID. A protein with a confidence threshold of 95% (unused confidence threshold ProtScore>1.3) was reported and the corresponding False Discovery Rate (FDR) was less than 1%. In protein grouping, competitor threshold was set as 2.00 in ProtScore.
2014-04-11 | PXD000635 | Pride
Project description:The purpose of this study was to generate a basis for the decision of what protein quantities are reliable and find a way for accurate and precise protein quantification. To investigate this we have used thousands of peptide measurements to estimate variance and bias for quantification by iTRAQ (isobaric tags for relative and absolute quantification) mass spectrometry in complex human samples. A549 cell lysate was mixed in the proportions 2:2:1:1:2:2:1:1, fractionated by high resolution isoelectric focusing and liquid chromatography and analyzed by three mass spectrometry platforms; LTQ Orbitrap Velos, 4800 MALDI-TOF/TOF and 6530 Q-TOF. We have investigated how variance and bias in the iTRAQ reporter ions data are affected by common experimental variables such as sample amount, sample fractionation, fragmentation energy, and instrument platform. Based on this, we have suggested a concept for experimental design and a methodology for protein quantification. By using duplicate samples in each run, each experiment is validated based on its internal experimental variation. The duplicates are used for calculating peptide weights, unique to the experiment, which is used in the protein quantification. By weighting the peptides depending on reporter ion intensity, we can decrease the relative error in quantification at the protein level and assign a total weight to each protein that reflects the protein quantitation confidence. We also demonstrate the usability of this methodology in a cancer cell line experiment as well as in a clinical data set of lung cancer tissue samples. In conclusion, we have in this study developed a methodology for improved protein quantification in shotgun proteomics and introduced a way to assess quantification for proteins with few peptides. The experimental design and developed algorithms decreased the relative protein quantification error in the analysis of complex biological samples. Data analysis: LTQ Orbitrap Velos Proteome discoverer 1.1 with Mascot 2.2 (Matrix Science) was used for protein identification. Precursor mass tolerance was set to 10 ppm and for fragments 0.8 Da and 0.015 Da were used for detection in the linear iontrap and the orbitrap, respectively. Oxidized methionine was set as dynamic modification and carbamidomethylation, N-terminal 8plex iTRAQ, and lysyl 8plex iTRAQ as fixed modifications. 4800 MALDI TOF/TOF Peptide identification from the Maldi-TOF/TOF data was carried out using the Paragon algorithm in the ProteinPilot 2.0 software package (Applied Biosystems). Default settings for a 4800 instrument were used (i.e. no manual settings for mass tolerance was given). The following parameters were selected in the analysis method: iTRAQ 8plex peptide labeled as sample type, IAA as alkylating agent of cysteine, trypsin as digesting enzyme, 4800 as instrument, gel based ID and Urea denaturation as special factors, biological modifications as ID focus, and thorough ID as search effort. 6530 QTOF Peptide identification from the QTOF data was carried out using the Spectrum Mill Protein Identification software (Agilent). Data was extracted between MH+ 600 and 4000 Da (Agilent’s definition). Trypsin was used as digesting enzyme, and parent and daughter ion tolerance was set to 25 and 50 ppm, respectively. IAA for cysteine and iTRAQ partial-mix (N-term, K) were set as fixed modifications while oxidized methionine was set as variable modification. Database and peptide cut-off for all searches Searches were performed against the IPI database (build 3.64) limited to human sequences allowing 2 missed cleavages. False discovery rate (FDR) was estimated by searching the data against a database consisting of both forward and reversed sequences and set to < 1 % at the protein level using MAYU. Peptides corresponding to a <1% protein FDR rate was used in the calculations. Peptide and protein identification using Mascot for comparison between instruments Peptide identifications were performed using Mascot Daemon 2.3.2 with Mascot 2.4 for fractions 32 to 36 from IPG-IEF with 400 ug loaded peptides. Carbamidomethylation (CAM) for cysteine was set as fixed modification, oxidized methionine as variable modification and iTRAQ 8plex was set as quantification for all searches. MALDI-TOF/TOF search settings: Parent and daughter ion tolerance was set to 150 ppm and 0.2 Da, respectively. LTQ Orbitrap search settings: Precursor mass tolerance was set to 10 ppm and for fragments 0.8 Da and 0.015 Da were used for data generated in the linear ion trap and the orbitrap, respectively. QTOF search settings: Parent and daughter ion tolerance was set to 25 and 50 ppm, respectively.
2013-08-16 | PXD000418 | Pride
Project description:Tandem mass tags (TMT) enable simple and accurate quantitative proteomics for multiplexed samples by relative quantification of tag reporter ions. Orbitrap™ quantification of reporter ions has been associated with a characteristic notch region in intensity distribution, within which few reporter intensities are recorded. This has been resolved with updated instrument acquisition software, however, 53 % of Orbitrap submissions to PRIDE were generated using the prior software versions. To quantify the impact of the notch on existing quantitative proteomics data, we generate a mixed species benchmark and acquired quantitative data using the outdated software version. Sub-notch intensities are systemically underestimated, leading to over-estimation of the true differences in intensities between samples. However, when summarising reporter ion intensities to higher level features, such as peptides and proteins, few features are significantly affected. The analysis of benchmark dataset indicates that the targeted removal of spectra with reporter ion intensities below the notch is not beneficial for differential peptide or protein testing. Overall, we find the systematic quantification bias associated with the notch is not detrimental for typical proteomics experiments
2021-07-20 | PXD027248 | Pride
Project description:Quantifying proteins based on peptide-coupled reporter-ions is a leading multiplexed quantitative strategy in proteomics that significantly alleviates the problem of ratio distortion caused by peptide co-fragmentation, as commonly observed in other reporter-ion based approaches, such as TMT and iTRAQ. Fueled by improvements in mass spectrometry and data processing, data-independent acquisition (DIA) is an attractive alternative to data dependent acquisition (DDA) due to its better reproducibility. While multiplexed labeling is widely used in DDA, it is rarely used in DIA, presumably because current approaches lead to more complex MS2 spectra or to a reduction in quantification accuracy and precision. Herein, we present a versatile acetyl-alanine-glycine (Ac-AG) tag which conceals quantitative information in isobarically labeled peptides and reveals it upon tandem MS in the form of peptide-coupled reporter-ions. Since the peptide-coupled reporter-ion is precursor-specific while fragment ions of the peptide backbone originating from different labeling channels are same, the Ac-AG tag is compatible with both the widely adopted DDA as well as with the DIA mode. By isolating the monoisotopic peak of the precursor ion in DDA, intensities of the peptide-coupled reporter-ions simply represent the relative ratios between constituent samples. While in DIA, the ratio can be inferred after deconvoluting peptide-coupled reporter-ions. The proteome quantification capability of the Ac-AG tag was demonstrated by triplex labeling of a yeast proteome spiked with bovine serum albumin (BSA) over a 10-fold dynamic range. Within a complex proteomics background, the BSA spiked at 1:5:10 ratios was detected at ratios of 1.00 : 4.87 : 10.13 in DDA and 1.16 : 5.20 : 9.64 in DIA.
2021-09-09 | PXD021187 | Pride
Project description:Mass spectrometry-based quantitative proteome profiling is most commonly performed by label-free quantification (LFQ), stable isotopic labeling with amino acids in cell culture (SILAC), and reporter-ion based isobaric labeling methods (TMT and iTRAQ). Isobaric peptide termini labeling (IPTL) was described as an alternative to these methods and is based on crosswise labeling of both peptide termini and MS2 quantification. High quantification accuracy was assumed for IPTL because multiple quantification points are obtained per identified MS2 spectrum. A direct comparison of IPTL with other quantification methods has not been performed yet because IPTL commonly requires digestion with endoproteinase Lys-C. To enable tryptic digestion of IPTL samples, a novel labeling for IPTL was developed which combines metabolic labeling (Arg-0/Lys-0 and Arg-d4/Lys-d4, respectively) with crosswise N-terminal dimethylation (d4 and d0, respectively). The comparison of IPTL with LFQ revealed significantly more protein identifications for LFQ above homology ion scores but not above identity ion score. However, the quantification accuracy was superior for LFQ despite the many quantification points obtained with IPTL. A reason for this outcome is probably because of the significantly higher signal intensities in MS1 compared to MS2.
2022-02-17 | PXD026942 | Pride
Project description:Twenty million LbetaT2 cells were transfected with either control or Galphas siRNA, then were seeded in 100-mm cell culture plates in DMEM + 10% FBS. Two days later, cells were washed twice with pre-warmed PBS. Conditioned media was harvested another 24 h later, and centrifuged at 20,000 g for 10 min at 4°C to remove cell debris. To enrich secreted proteins in the conditioned media, conditioned media samples were centrifuged using Amicon centrifugal filters with a 3kDa cutoff (Millipore, Billerica, MA). A total of 8 concentrated conditioned media samples were independently prepared: 4 samples from control siRNA-treated cells, and 4 samples from Galphas siRNA-treated cells. Samples were stored at –70°C until they were sent to the Mount Sinai Proteomics Core Facility.HPLC-isobaric tags for relative and absolute quantitation mass-spectrometry (iTRAQ MS) - Data analysis ProteinPilot 3.0 (AB Sciex) was used to search the MS/MS spectra for protein identification and quantitation with its searching algorithm Paragon 3.0.0.0 (*Reference). The protein database used for searching was Uniprot mouse fasta file (release-2010_11). The search parameters include quantitation for iTRAQ 8-plex (peptide-labeled), MMTS for cysteine alkylation, trypsin for enzyme digestion, biological modifications for ID focus, and taxonomy set for Mus musculus. The detected protein threshold was set to 1.3 (95% confidence). Additionally, we converted our AB Sciex mass spectral data (TOF/TOF data) into an mzML format, using the AB Sciex MS Data Converter (beta version 1.3) tool. Finally, we used the command line tool group2xml, which is included with ProteinPilot Software, to convert the .group search engine result file to an XML file.
2016-09-27 | PXD000063 | Pride
Project description:Serum from Chikungunya patients was pooled and subjected to depletion using multiple affinity removal system to remove the abundant proteins. The depleted protein was then fractionated using SCX. All the fractions were analyzed on the high-resolution LTQ-Orbitrap Velos mass spectrometer. The data obtained was searched against the human RefSeq 52 proteins using Proteome Discoverer, version 1.3.0.339 workflow. The workflow consisted of spectrum selector and reporter ion quantification nodes in addition to SEQUEST and Mascot search nodes. Similar parameters were used in all the searches with trypsin as enzyme allowing a single missed cleavage. Other parameters include methylthiol modification of cysteine, iTRAQ labels at the peptide N-terminus and Lysine residues as static modifications and oxidation of methionine as variable modification. A mass tolerance of 20 ppm and 0.1 Da were used for the precursor ion and fragment ions, respectively with a signal to noise ratio of 1.5 for a precursor mass range of 350–10000 Da. A false discovery rate (FDR) of 1% was applied to the results.
2013-12-12 | PXD000234 | Pride